when i resume my pc from sleep the blue screen appears with some written stuff and my pc restarts. This has worried me alot and i would like to know a way i can fix it. Im using windows 7 64 bit.
View 2 RepliesI am having this blue screen error often occurs during resume from hibernate or sleep. Have been reading bleeping computers.com and figured out where to find the error report, and pasted it below. NO hardware or software changes done, everything seems to be updated from the update advisory. Please help me find a solution, it's getting annoying to have a computer these days and slightest problem.
View 1 Replies View RelatedWhenever I put my computer into sleep mode I press the power button once to get it out of sleep mode but when it comes up it has a blue screen with a bunch of errors on it. My computer is custom built. It is a AMD Dual Core (64-Bit) Fresh install of Windows.
View 7 Replies View RelatedI recently put together a new computer and installed Windows 7 on it. Everything seems to work fine, except when I resume using the computer after it goes to sleep, I get a BSOD. When I wake the computer up, it shows me the log-in screen, but when I click on my user profile to log in a blue screen appears. Also, it only seems to happen when the computer enters sleep mode on its own. If I put it into sleep mode, it wakes up with no problems.
View 3 Replies View RelatedI have a refurbished Dell XPS 15 laptop from 5 months. Every time i resume my windows from sleep, after a few minutes i got different Blue Screen errors. I've re-installed my OEM windows, once (from recovery Partition) but still the same errors.I've attached my mini-dumps files, with the report and some screenshots.
View 1 Replies View RelatedFor months I had Windows 7 installed and running without any incidents; I was using Microsoft Security Essentials. The other day I installed Win8, decided I hated it, and reformatted/installed Windows 7. This time I tried Avast 7 Free and things looked good for a while until I woke up my PC from Sleep mode then it crashed.
View 5 Replies View RelatedI've been having a problem with Windows 7 recently on my new computer that I just got a couple weeks ago. The problem is that my computer will have a blue screen error when waking from sleep mode. I don't see the blue screen at all, instead, when waking from sleep mode, I see the BIOS screen and then it goes through the typical startup process as if the computer had been powered OFF instead of put into sleep mode (however, I know it was properly in sleep mode, as the power light on my tower flashes continually rather than shutting off during this mode). I get the message that Windows did not shut down properly and have the option to boot into safe mode, etc. When I boot back into normal mode I receive a message in Windows saying windows has recovered from an unexpected shut down. [code] However, when I tried to install the hotfix, I was given the message "This update does not apply to your system", which I have read may be an indicator that the update has already been installed? I have run Chkdsk on drive C successfully, and I have installed every available windows update as of today (Apr 14, 2012)
View 14 Replies View RelatedI've found that when whenever I let my computer go to sleep, hibernate or restart it or shut it down then a blue screen will appear and restart the system. When the system comes to it will tell me the event name was Blue Screen and that the computer is recovering from a unexpected shutdown.I'm currently running my computer on the High Performance plan and not letting it go to any other mode?By the way, my system is a dual boot with Windows XP. XP is on my main drive and 7 is on my second drive.
View 9 Replies View RelatedSwitched from XP to windows 7 home basicMy system :Operating system : windows 7 home basic (original)mother board :Asus P5B Mx wifi apProcessor : intel dual core , 1.6 GhzRam : 3 gb ddr2Problem : Once i put my system on sleep , on switching on, it does not display screen.My system gets blue screen and get restarted when it wakes up from sleep.
View 1 Replies View RelatedI have a Plextor 716-A DVD drive in my machine that's running Windows 7 32-bit, ASUS P5Q deluxe MB and 2 x SATA HDD's. The DVD drive is not found by Windows on start-up, it does not appear in My Computer or in Computer Management - basically Windows knows nothing about it.
The DVD drive is found in the BIOS and I can see it's being loaded during boot-up. I can use the drive as a bootable drive. The drive is only discovered by Windows when I enter and then resume from sleep mode or hibernation and works fine.
I just built a new computer and had it running stable for several days with all hardware except the graphics card and a new monitor. After plugging the new video card, I believe the system remained stable, but am not 100% confident since it only survived overnight. After plugging the new monitor (HP z2740w) and connecting via USB crashes started occurring when resuming from sleep.
I tried uninstalling the graphics drivers and the problem seems to have stopped for now, so I'm reinstalling to see if anything changes.
Windows 7 Pro 64 OEM (System Builder) Everything in the machine is brand new except the hard drives. Installation age is a few days.
I got a new monitor (Dell 2007wfp) and hooked it up to via VGA cable. I ordered a usb cable for it, and a DVI cable and then I went out of town for two weeks and completely unplugged all electronics including my computer. When I got back I installed the new cables, plugged everything back in, and the computer wouldn't start. The light on the PSU was flashing. I re-seated the PSU and then it came on just fine. Now every time my computer tries to resume from sleep I get a BSOD with the error "Bad_Pool_Caller".I have included the files requested in the instructions.
View 8 Replies View RelatedI don't know what's going on but everytime I try to set my computer to sleep, it doesn't resume anymore instead it restarts automatically.
View 1 Replies View RelatedAbout 75% of the time, when I lift the lid to resume my laptop from sleep, the laptop will not resume immediately. The screen will remain black, the wifi light stays disabled, and while I can hear the fan, nothing else really happens.Usually after anywhere from 3 to 20 seconds, though, the laptop will eventually wake up, and I believe it tends to be when the hard drive actually starts spinning -- the hard drive light will blink and I'll hear the faint 'click' of the hard diskThe resume used to be more or less instant. I've reformatted since I first noticed this problem, yet I still have it, which makes me think it might be a hardware issue
View 5 Replies View RelatedEvery time my dell laptop is in sleep mode for a while - and there is still plenty of battery left it seems to "resume windows" and it's like a startup. Shouldn't it just ask for my password and be there right away?
View 3 Replies View RelatedI have a Plextor 716-A DVD drive in my machine that's running Windows 7 32-bit, ASUS P5Q deluxe MB and 2 x SATA HDD's.The DVD drive is not found by Windows on start-up, it does not appear in My Computer or in Computer Management - basically Windows knowns nothing about it.The DVD drive is found in the BIOS and I can see it's being loaded during boot-up. I can use the drive as a bootable drive.The drive is only discovered by Windows when I enter and then resume from sleep mode or hibernation and works fine.I've gone through every article I could find on the Web from Mr Fix it to the Upper/Lower Filters regedit.
View 4 Replies View RelatedI upgraded from Vista Home Premium and I've been having issues when I close the lid of my laptop, it'll automatically go to sleep. When I open the lid, a blue screen comes up, notifying me that there is an issue and then it restarts.
View 9 Replies View RelatedMy adapter is always gone from resuming from sleep. I know it was working before. Just changed my ram and bios settings from a fresh build. Went from Corsair xms3 to G.Skill Ripjaws.
I am having this same issue with my newly built pc. The drive running Windows 7 is from a laptop where the mobo died. I am using it in AHCI mode because my case has a front hot swap caddy.
I have a Gigabyte Z68X-UD3H-B3 mobo and after installing and uninstalling drivers, software, changing settings, removing ram, changing power options to maximum power for pci card and wifi, turning off hibernate, restarted, rebooted, updated all drivers from Gigabyte, chipset drivers, etc. I have unchecked "allow Windows to turn off this device". Restarted and tested and I get the same issue. I have unchecked this box in all of my networking devices too including, 802.11n Wireless Lan Card #2 and Microsoft Virtual Wifi Miniport Adapter. Also, uninstalled and reinstalled these and updated drivers from my disc that came from Gigabyte as well as driver update from the Gigabyte website.
Nothing I do will turn on my wifi card after sleep. Windows will not see a network adapter. Everything works fine after restarting though. I have S3 enabled in bios as that is what I want. I have case fans that I don't want to hear with no option to turn them off. Otherwise, i'd be fine with S1.
Is this just not a working feature? I've read that sleep is an ongoing issue with Windows, but my pc sleeps fine. I just want to be able to put my pc to S3 sleep and resume with a working wifi card. There must be a key setting i'm missing because i'm sure it was working with my last set of ram.
My Windows 7 is:- x64 Home Premium SP1- the original installed OS on the system.- an OEM version. Came pre-installed on system.- The age of system (hardware) is 8 Months.- The age of OS installation is 8 Months.- Never re-installed.Hardware is:Sony VAIO VPC-EB46FXIntel Core i5 CPU M480 @2.67GHz
View 3 Replies View RelatedMy adapter is always gone from resuming from sleep. I know it was working before. Just changed my ram and bios settings from a fresh build. I am having this same issue with my newly built pc. The drive running Windows 7 is from a laptop where the mobo died. I am using it in AHCI mode because my case has a front hot swap caddy. I have a Gigabyte Z68X-UD3H-B3 mobo and after installing and uninstalling drivers, software, changing settings, removing ram, changing power options to maximum power for pci card and wifi, turning off hibernate, restarted, rebooted, updated all drivers from Gigabyte, chipset drivers, etc. I have unchecked "allow Windows to turn off this device". Restarted and tested and I get the same issue. I have unchecked this box in all of my networking devices too including, 802.11n Wireless Lan Card #2 and Microsoft Virtual Wifi Miniport Adapter. Also, uninstalled and reinstalled these and updated drivers from my disc that came from Gigabyte as well as driver update from the Gigabyte website.
Nothing I do will turn on my wifi card after sleep. Windows will not see a network adapter. In device manager, there is no wireless card, even after showing hidden devices. Adding a device does not discover it. Installing the network card driver and software does nothing to detect it. Windows thinks there is no device connected. Everything works fine after restarting though. I have S3 enabled in bios as that is what I want. I have cpu fan that I don't want to hear with no option to turn them off. Otherwise, i'd be fine with S1. Is this just not a working feature? I've read that sleep is an ongoing issue with Windows, but my pc sleeps fine. I just want to be able to put my pc to S3 sleep and resume with a working wifi card. There must be a key setting I'm missing because I'm sure it was working with my last set of ram.
I have got an HTPC/Server that has a lot of hard drives in it. The OS is run off a SSD and of all the hard drives, the one that really gets used is 1.5TB WD drive for recording of the television.
I have set Windows up so it turns off hard disks off after 20 minutes if they are not being used which is fine, but my problem is that my computer automatically goes into Sleep Mode (S3 hybrid sleep) when it is not recording anything and when it wakes up all the hard drives spin back up.
Is there any way to keep hard drives spun down even when resuming from sleep?
Windows 7 64-bit
ASUS P7P55D-E LX
Core i5-750
Just the other day, I bought a Samsung 830 SSD and tried to install it yesterday. There were several problems, including the SSD not showing up in disk management and Windows Explorer, but showing up in device manager, and showing up in the BIOS. The biggest problem, however, was learning that my motherboard could not do SATA 6 without halving my PCI-E x16 lane. Anyway, I decided to hold off on the SSD until my next build and I'm sending it back.
The issue now is that I cannot put my computer to sleep. When I do, it resumes within a second or so. I tried unplugging every device from it, including my Ethernet cable and all USB devices, and it still persists. I also changed power management to disallow my network card from waking my computer, and changed the suspend mode of my USB controller to disallow them to wake the computer as well.
While installing the SSD, I recall changing the SATA 6 Marvell controller from IDE to AHCI (two SATA 6 ports are controlled by Marvell (into which I plugged my SSD) and the others by JMicron). As of writing, the Marvell controller is back to IDE and has nothing plugged into it. I also installed a few SATA controller drivers while attempting to get SATA 6 speeds and trying to figure out why my SSD was not showing up in disk management (I could not even format it via a right-click and it had no drive letter).
My suspend mode is set to "Auto" in BIOS, same as it's always been. Perhaps this has nothing to do with my failed installation of the SSD. But it only began after I tried to install it.
I keep getting a message on a bluescreen, often when the cpu comes out of sleep mode, that it is shutting down to avoid damage or something. I also often have trouble getting ctrl alt del to work. Recently, we removed several viruses, and hijackers from the computer, that made it so I couldn't even google search, and its only been doing it since then. As I write, malwarebytes said it was removing threats. I have scoured everywhere I could think of and removed almost all unnecessary programs, files and downloads. Could there stll be a virus? Could a previous virus have corrupted the comp irreversibly?
View 2 Replies View RelatedI am having difficulty with drivers on my Acer Aspire 5253 system using Win 7. It is a couple months old. Within the last month, I have been getting random blue screen of death error messages in which the computer shuts down to prevent damage. The computer boots up fine without any problems. The blue screen that I see contains the same information each time.
View 14 Replies View RelatedBlue screen and freezing. This is happening frequently but never has any regularity to it. Sometimes happens after a couple of days and sometimes after a couple of minutes. Also sometimes with only one browser window open and sometimes with 15 or more. Happens with both chrome and firefox. Has not happened with other programs as this lapy only gets used for surfing/email/forums etc. Sometimes happens while the computer is sitting idle right after boot. Very strange.
View 3 Replies View RelatedI have recently bought a computer and I have found that when I turn it on it runs normally until after the "Resuming Windows" screen, where everything turns off and the screen goes black. It had been running well for the last few days, so this came out of nowhere.I have searched this problem and I come up with a bunch of different solutions but no one agrees. The most common reason (apparently) is my version of Windows 7 Home Premium (x64) and I need to install something or other. But I can't even get to the desktop, and no one really explains it simply. [code]
View 3 Replies View RelatedI have recently been getting the blue screen of death at random times, I think it might be coinciding with sometimes when I have my phone plugged in to charge. I believe it said page fault in non paged area once. It has done it more than once though.Here is what windows gave me after it booted back up from 2 different times: #1Problem signature: Problem Event Name: BlueScreen OS Version:6.1.7601.2.1.0.768.3 Locale ID:4105Additional information about the problem: [URL]
View 1 Replies View RelatedCan't find any info with a quick search. I am more a hardware, not software guy. I don't know if this is related but it is a $1000 gaming rig with an SSD, boots up great, but takes about 5 minutes to shut down. Reason for this?
View 8 Replies View RelatedI am a computer musician using a PC running Windows 7. My problems began when I was working on a new track in Abelton Live 8. I had a decent size project running when Abelton crashed. It was late so I just shut down my PC and went to bed. The next afternoon, everything booted up fine. I loaded Abelton and the project I was working on. As soon as the project opened I got a blue screen. I tried restarting my computer and this time Windows would not even boot. I received an error message saying BAD_POOL_CALLER. I restarted in Safe Mode and Windows was able to boot, but an error box came up saying that it could not load NVCP.dll. I contacted my computer guy and he said that file is for my NVidia drivers and that I should uninstall them, try to boot and if that worked then reinstall them with the latest version. I go into the Control Panel and try to Remove Program but the NVidia driver will not uninstall. There are 5 drivers listed for NVidia and 4 of them will uninstall by themselves, but one of them is completely unresponsive. Every time I select it and hit uninstall it just sits there and nothing happens. I tried reinstalling the drivers but it gives me an error every time it begins to unpack the zip file so I can't do that either. I've tried in both Safe Mode and Normal but I keep getting blue screen crashes as I'm trying to fix the problem.
View 3 Replies View RelatedFor a while (ever since I updated my BIOS, I think) my computer have been taking around 10 minutes to shut down and after the 10 minutes it shows a blue screen for a second and then it restarts/shutdown. I recorded the computer screen while it was shutting down and was able to take a screenshot of the blue screen. This is what it says: Code: DRIVER_POWER_STATE_FAILURE
If this is the first time you've seen this stop error screen. Restart your computer. If this screen appears again follow these steps:
Check to make sure any new hardware or software or software manufacturer for any windows updates you might need.
If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as catching or shadowing. If you need to use Safe Mode to remove or disable components , restart your computer, press F8 to select Advances Startup Options, and then select Safe Mode.
Technical information:
*** STOP: 0x0000009F (0x00000003, 0x84F79838, 0x82B6AAE0, 0x853F1270)
i just bought new PC AMD FX 8150 Processor 8-Core 16mb cash.
ASRock 970 Extreme 4.
Corsaire 8GB RAM.
Cooler Master PS 400W.
NVIDIA 430 GT 2GB VGA
and after i installed new fresh copy and windows 7 home premuim x64 , while opening a game PC made this error once since that its always when iam loading something on pc / gaming / multi tasking this error comes up , so i installed all the updates of motherboared lastes nvidia graphics card and still no use -.- , i searched the forums and found i ihave to get the perfmon & Windows_NT6_BSOD_v3.03_jcgriff2_ files so here it is .