I tried to update avg on hubs laptop so the kids can play and now after I did it we can't get online period!! on the tool bar were the connection pic is says limited connection? So I did all of the steps to fix ect and it finally came up to.
- There might be a problem w/the drivers for the wireless connection2 adapter
- There might be a problem w/the drivers for the local area connection adapter
MY actual modem is good as we have 3 running right now - should I go to restore point before avg in the critical update moments before I realizes this problem?
"Problem with the driver for Wireless Adapter".I have an HP-Pavilion 2009f with Windows 7 home premium 64-bit. All has been fine with my internet connection, except for a few drops here and there, but all in all it has been tolerable. When I went to bed last night it worked, when I woke up, it didn't. When I troubleshoot I get the message, "There might be a problem with the driver for the Wireless Network Connection Adapter", to which Windows cannot fix. I get this same error message, respectively, for both wired and wireless connections. After troubleshooting without success, I decided to try and do system update.I am only connected with "Limited Access".What's even weirder is when I open a cmd window and enter ipconfig /all.
As you can see today when I got on my laptop I wasn't able to connect to the Internet and after attempting to troubleshoot I got this error message along with one saying a network cable is not properly plugged in or is broken. We recently switched Internet service providers and the Internet has been running fine. The only proble I had was sometimes it would randomly drop in speed but I don't think that has anything to do with the issue. Last night it was working perfectly, but then it went slow so I unplugged our router and then disabled the wireless network then reeanbled it. Anyways I've been using this network for a few months now without issues but I think the issue lies within my computer. I checked for windows updates and installed them but no luck. Then I checked for driver updates for my adapters but they were up to date. I don't have any screenshots and I'm on a tablet. Also please use the simplest terms possible because while I have a basic understanding of these things, I'm no expert and I don't want to miss anything
When I problem solve it the message is to update and it is the driver for wirless nedwork connector adapter. I have both windows 2007 and 2010 sharing. I can get on the internet by pluging into it and my adress shows as well. Windows 2007 is continually configuring which is getting very old. I tried recovery 3-4 times and it will not recover to a passed date.
I am only getting " limited" access to the wireless network at my university, meaning no access! I had no wireless adapter issues 20 min earlier. The only thing I did install was driverupdate, cause I was getting the blue screen only when I was connected to the wireless network at school and the code that came up on the blue screen said something wrong with the driver.I have tried s restore to te previous day, that didn't work! I uninstalled DriverUpdate, still doesn't work. I've tried clearing dns cashe at cmd, that didn't work.
I am using the Belkin FD7050 v3 USB adapter. I was having all kinds of problems getting 7 to recognize it and find a network.
I got it work by installing Vista x64, running all windows updates and installing the adapter, then doing an in-place upgrade.
Everything was working great, no wireless problems at all. Then I unplugged the adapter and plugged it back in to a different USB port. Win 7 recognized the adapter right away and installed drivers, but it can't see any networks. Very similar to the first time I installed 7 before upgrading from Vista.
I have since tried uninstalling/re-installing. Letting Win 7 find drivers, manually installing the FD7050 v3 drivers from Belkin. Tried installing the Belkin drivers in XP compatibility mode and Vista Compatibility mode. Nothing works.
I'm trying to not have to completely reinstall Vista x64 and then upgrade to 7 x64 again. Any ideas?
I am trying to fix my friends wireless connection here, im a mac user and not very good on windows so i dont know what to do. I am following some you tube videos for help. As far as i know in 'change adaptor settings' you should be able to see your LAN and wireless connection to enable or disable but the thing is there is no wireless option in there? and it did used to work before.My friend told me that she used to have XP and another friend of hers upgraded it to windows 7 for her.
I installed a new wireless adapter yesterday in the hope of increasing my internet speed. After installing the driver for the adapter I realised that my internet was no longer working. I can still see the connection but it is limited and doesnt allow me to connect to the internet. I also had a system up date the night before and hadn't been on the internet since that happened so am unsure if this has any part in it.I have tried uninstalling and reinstalling the drivers for both the adapters i have to no avail, as well as plugging my pc into a laptop and using internet connection sharing which also doesnt work.If i run a network repair i end up with two problems found:
1)There might be a problem with the driver for the local area connection adapter
2)There might be a problem with the driver for the wireless network connection adapter They both have yellow signs with exclamation marks next to them.If i type ipconfig/all into the cmd line I get:
I have a Verizon router and I purchased a NetGear N900 wireless dual band usb adapter for my son's computer. I was going to test the N900. It is for college.The N900 will not connect. I do have three other laptops that do connect and work ok. The N900 has WPS but the Verizon router does not.So I have to use the SSID, 'wep' option, and the wep key. The N900 tries to connect and stops trying after about 20 seconds or so. The N900 varies from 4 to 5 green bars. N900 installation was followed and went smoothly and the new software version was used. We are using Windows 7 Home Premium 32bit on my son's computer.I also purchased the Western Digital My Net N750 router for college. I have no way to test everything at home. It does have WPS so at the college I hope everything works.
My laptop cannot currently connect properly to the internet. After trouble shooting, the diagnosis is that "There might be a problem with the driver for the Wireless Network Connection adapter". My laptop also wouldn't connect to the internet via cable. I'm not sure what the problem is as my laptop was working fine last night.
I have Windows 7 Home Premium (32 bit) installed on my Sony Vaio VPCEB36FG.
My brothers advent modena laptop stopped working and it turned out it was a hard drive issue. I replaced the hard drive and reinstalled windows 7 32bit. I had to download a iso file from [URL] as he wasn't give a installation disc. The install went fine except when it was finished there was no internet connection available. I tried to troubleshoot but couldn't find any network drivers.
im running windows 7 on my toshiba sattelite L15 S104 and and i cant find a driver for my T60N871 802.11 b/g WLAN wirless adapter. its made by intel but it says foxconn with it also. ive tried toshiba.com and intel.com and still cant find it. does anyone know where i can because i really dont want to go buy a new wirless net work adapter.
Some server game banned my macaddress (NIC).So now I can't login this game with my lan card (Local Area Connection) in my windows but I sloved problem by play that game in VMWARE that have a virtual network adaptor with a new macaddress Question is if it possible to create virtual network adaptor with new macaddress in my windows7 , Not in vmware or vitual pc etc...Because I want to play this game in my windows but this server banned my lan card myaddress I need a new connection that have a new macaddress like vmware network adator.
I have a AR9285 Wireless Network Adapter installed in my Asus Eee PC. Whenever I wake up the computer from hibernate or sleep, the wireless adapter takes a full minute or more before it will actually connect to a network. Once it is awake and connected, I have no issues, and I have no problems connecting to different networks. So it is working as intended most of the time. When starting up the computer from "off," it is usually fine as well, since the amount of time it takes to fully start up the computer is usually about enough time for the adapter to get going (though not always).I cannot ever "quickly" look something up on the computer, as I have to wait a few minutes in order to be connected to the internet. Has anyone had or heard of this problem? I checked and the driver is up to date.
A few months later i wanted to upgrade my 32 bit to 64, since i could only use 3,16 GB ram, and my computer has 8GB. So i bought a win 7 home premium 64 bit and installed it. Now i face the same problem, my computer can not detect any wireless network adapter, though i'm 99% sure that my computer has one.
since build 7068 I've been facing this problem with this network adapter, will try to explain as good as I can.
Problem as following: Everytime I start the pc after one or two minutes I lost my internet connection and when I try to restart the pc it hangs when shutting pc is showed, forcing me to shut it down only whit the power button.
I have tried to install the vista x64 driver that I have for this network adapter but cannot installed since is onlyfor vista x64, neither in compatibilty mode. After a few research managed to installed it via safe mode. and by now is working good but device manager shows a warning icon and a Cannot start device code 10.
any knows is theres a win 7 update driver?? can I just keep ignoring the code 10 till this bug is fixed??
I just finished building a new PC and installed Windows 7 Home Premium 64 bit today.I have an ASUS Wireless PCI Express Adapter (PCE-N13 802.11 b/g/n). DSL, with a Linksys rounter. Theres just a red X mark on the taskbar and it won't show any open connections =/. I have several wireless devices that work even outside the range which is about maybe 5 meters away from the router. Its pretty much impossible for me to run a wired connection to my PC and need to have a wireless one since theres many tables/couches/chairs inbetween the router and my new PC.
USB wireless adapter is dlink DWA-130C, driver installed properly and windows 7 32bit detected it correctly as DWA-130C on device manager but it could not find any network in my area.
When I do troubleshoot, windows tell me that driver may not installed properly.
FYI it happened with my older G USB adapter too, when I uninstall the driver to update, it installed normally but then it does not detect any network. I have to do system restore to make it work again.
I've been using windows 7 32 bit for quite awhile now. But i really want to use the 64 bit windows. However i face the problem that right after my wireless installation, i am unable to get windows to recognise my wireless adapter.
As such i cant install the driver and since i lack the internet, i am unable to run windows driver update, so i cant search for the driver online. any ideas how i can solve this problem other than buying a new wireless adapter? im using a linksys wireless- G, model No: WUSB54G, wireless adapter
Last night my wireless adapter (Atheros AR5007EG Wireless Network Adapter) stopped working. In the properties it says it is working properly, however,it will not find a single wireless network to connect to, only the big red X over the icon in the system tray. My wife's laptop which is 5 feet from mine, finds our network as well as several of our neighbors. I upgraded to Windows 7 last month, so this morning I tried updating drivers, installed these but still the big red X. My laptop will work with the ethernet cable plugged in, just not wireless.I am stumped because it says it is working properly in the properties menu and not returning any errors during troubleshooting. I know its not my router, as my xbox, ipod touch, android phone, and wife's laptop can connect and work fine. Since she and I have the same laptop, I made sure that our properties settings were the same this morning as well, and they match up.
My new Samsung laptop has just stopped allowing me access to the internet. Its not a problem with the router as I have a wired connection to a desktop that is fine. My laptop has been working ok but now I just get 'Limited Access' from the status bar. All the other checks have been made with ISP the Intel(R) Centrino(R) wireless N130 is supposed to be working according to the network properties dialogue box. Also have wired the ethernet from desktop to laptop and still the same response so narrowing it down to the possible driver software.
I have had my HP Pavilion dm4 for a year and a half now, and when my school gave me a copy of Windows 7 Enterprise (it came with Windows 7 Home) I installed it and all the necessary drivers, and everything's been running smoothly - til now.Tonight all of a sudden my Internet connection showed that it was connected but had "limited connectivity" - aka no Internet. So I restarted my router - no luck. Then I restarted my computer, and my F12 wireless button showed orange - meaning that wireless capability was turned off entirely. It wouldn't turn back on even if I pushed the button, so I went into Control Panel and did some diagnostic thing and it forced the wireless capability back on and it worked again. For about an hour. Then the button went orange again and the diagnostic couldn't turn it back on.So, I went into wireless connections and disabled and reenabled the actual connection rather than the adapter, and it worked again - for about another hour.I don't think it should be a driver problem seeing as I can make it turn back on for certain periods of time and it's worked fine until now. Does anyone know what to do?