No Wireless Connection After Changing USB Port Of Adapter
Nov 4, 2009
I am using the Belkin FD7050 v3 USB adapter. I was having all kinds of problems getting 7 to recognize it and find a network.
I got it work by installing Vista x64, running all windows updates and installing the adapter, then doing an in-place upgrade.
Everything was working great, no wireless problems at all. Then I unplugged the adapter and plugged it back in to a different USB port. Win 7 recognized the adapter right away and installed drivers, but it can't see any networks. Very similar to the first time I installed 7 before upgrading from Vista.
I have since tried uninstalling/re-installing. Letting Win 7 find drivers, manually installing the FD7050 v3 drivers from Belkin. Tried installing the Belkin drivers in XP compatibility mode and Vista Compatibility mode. Nothing works.
I'm trying to not have to completely reinstall Vista x64 and then upgrade to 7 x64 again. Any ideas?
View 1 Replies
ADVERTISEMENT
Dec 28, 2011
So for several days ive been trying to get a wireless adapter to work on my esktop(windows 7 home premium 64bit). After a D-link xtreme N failed to function, I traded it in for a Linksys AE2500.Both devices failed to install correctly because they could not be detected by the install setup. Manually installing drivers would not work, errors would come up.The AE2500 would be detected when plugged in, then fail to install properly, then refuse any manual drivers. In the device manager it would be error 10, unable to start.It finally worked by a chance of luck, when I uninstalled the ports in my USB list.
So basically it will only function if I have the Enhanced USB ports uninstalled or disabled(it also has to be plugged in at the time of uninstall/disable). Doing so will cause it to automatically install its drivers and start working(it will then immediatly nag, that the USB port isnt 2.0 high-speed and claim that its not functioning at full speed). However, as soon as i reboot the machine, or run an update, or scan for hardware, the Enhanced USB ports reinstall themselves and the Wireless Adapter gets booted back to error 10
View 2 Replies
View Related
Nov 26, 2012
I have three different wireless networks I can connect to, but the one Windows connects to first by default is not my first choice. I'd like to reorder the connection priority. Problem is, as you can see, no networks show up in my manage networks control panel! It clear as day shows that there are five choices, but, does not list them for me to prioritize! Is there a setting somewhere I'm missing that will make the networks visible?
View 6 Replies
View Related
Jan 20, 2012
I have this problem with my laptop. If i am using a cable to connect to the internet and then unplug it and switch to wireless connection, the internet connection gets unstable. The thing is it says it is connected to the right wireless connection AND it claims to have internet connection. - And i do - for a few minutes.. If i deactivate/activate the wireless internet i am able to surf around for a few minutes again, but then it does the same thing again - shows up as having internet connection but im unable to connect to it..Strangest thing is that i am sometimes able to connect to the internet ONLY if another computer is using the wireless internet too.. It still shows up as recieving a nice signal with internet access even though i cant connect to the internet.
The same problem also occurs sometimes when im switching from one wireless connection (at home etc) to another (work etc)..I've had this problem for a few months now.. Comming to think of it i might have had this problem ever since i got my laptop.. Rebooting my computer fixes it every time, but it's not a permanent solution.. Im running original Windows 7 Home Premium x64 which came with the laptop.. Also im not using static ip or anything like that - switching to static ip doesn't do the trick.. Running ipconfig /all command from cmd also shows me as connected to the right router.. The problem occurs every time i switch between cable and wireless and not only at my home or work but also at friends..I'm not sure if i need to leave any more details, if i've left anything out just let me know.
View 2 Replies
View Related
Jan 5, 2013
I have found a wireless connection near me and connected to it. I saw that my speed is kind of good (about 14 Mb/s), I tried to get this speed higher.I went into the router setup from my browser, and changed some settings from thereOnce changed, I reboot the router to see if it changed my speed.The one setting that blocked my access to internet is MCS. I don't remember if that was off/disabled, but i changed it to MCS7, the last option available for MCS... thing.
View 4 Replies
View Related
Apr 25, 2011
I tried to update avg on hubs laptop so the kids can play and now after I did it we can't get online period!! on the tool bar were the connection pic is says limited connection? So I did all of the steps to fix ect and it finally came up to.
- There might be a problem w/the drivers for the wireless connection2 adapter
- There might be a problem w/the drivers for the local area connection adapter
MY actual modem is good as we have 3 running right now - should I go to restore point before avg in the critical update moments before I realizes this problem?
View 7 Replies
View Related
Nov 16, 2011
"Problem with the driver for Wireless Adapter".I have an HP-Pavilion 2009f with Windows 7 home premium 64-bit. All has been fine with my internet connection, except for a few drops here and there, but all in all it has been tolerable. When I went to bed last night it worked, when I woke up, it didn't. When I troubleshoot I get the message, "There might be a problem with the driver for the Wireless Network Connection Adapter", to which Windows cannot fix. I get this same error message, respectively, for both wired and wireless connections. After troubleshooting without success, I decided to try and do system update.I am only connected with "Limited Access".What's even weirder is when I open a cmd window and enter ipconfig /all.
View 2 Replies
View Related
Aug 14, 2012
As you can see today when I got on my laptop I wasn't able to connect to the Internet and after attempting to troubleshoot I got this error message along with one saying a network cable is not properly plugged in or is broken. We recently switched Internet service providers and the Internet has been running fine. The only proble I had was sometimes it would randomly drop in speed but I don't think that has anything to do with the issue. Last night it was working perfectly, but then it went slow so I unplugged our router and then disabled the wireless network then reeanbled it. Anyways I've been using this network for a few months now without issues but I think the issue lies within my computer. I checked for windows updates and installed them but no luck. Then I checked for driver updates for my adapters but they were up to date. I don't have any screenshots and I'm on a tablet. Also please use the simplest terms possible because while I have a basic understanding of these things, I'm no expert and I don't want to miss anything
View 1 Replies
View Related
Dec 31, 2011
I am trying to fix my friends wireless connection here, im a mac user and not very good on windows so i dont know what to do. I am following some you tube videos for help. As far as i know in 'change adaptor settings' you should be able to see your LAN and wireless connection to enable or disable but the thing is there is no wireless option in there? and it did used to work before.My friend told me that she used to have XP and another friend of hers upgraded it to windows 7 for her.
View 1 Replies
View Related
Jan 19, 2012
I installed a new wireless adapter yesterday in the hope of increasing my internet speed. After installing the driver for the adapter I realised that my internet was no longer working. I can still see the connection but it is limited and doesnt allow me to connect to the internet. I also had a system up date the night before and hadn't been on the internet since that happened so am unsure if this has any part in it.I have tried uninstalling and reinstalling the drivers for both the adapters i have to no avail, as well as plugging my pc into a laptop and using internet connection sharing which also doesnt work.If i run a network repair i end up with two problems found:
1)There might be a problem with the driver for the local area connection adapter
2)There might be a problem with the driver for the wireless network connection adapter They both have yellow signs with exclamation marks next to them.If i type ipconfig/all into the cmd line I get:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Home-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Shouldn't my wireless adapters appear here?
View 4 Replies
View Related
May 22, 2012
When I problem solve it the message is to update and it is the driver for wirless nedwork connector adapter. I have both windows 2007 and 2010 sharing. I can get on the internet by pluging into it and my adress shows as well. Windows 2007 is continually configuring which is getting very old. I tried recovery 3-4 times and it will not recover to a passed date.
View 3 Replies
View Related
Aug 19, 2012
I started getting a "DNS not responding"? on my desktop. All my wireless devices work fine, and when I turn off my laptop's WiFi card and plug it into the same router it works as well.I've done some Googleing on the issue and none of what I found has helped.When I do an ipconfig on each maching, the thing I notice is that on the working laptop I have an entry for the "Connection specific DNS suffix under the "Tunnel adapter Local Area Connection", where on the desktop that's not working the suffix is blank.
View 4 Replies
View Related
Nov 29, 2009
how can i make a connection with serial port in windows 7 like as i did in windows XP?
View 3 Replies
View Related
Mar 23, 2011
Internet connection over an electrical Powerline instead of a wireless connection?is it easy to setup, reliable, fast,..?More in particular a D-Link device:DHP-307AV PowerLine Homeplug AV Kit
View 6 Replies
View Related
Feb 1, 2013
Do I need a wireless adapter to make my desktop wireless!
View 2 Replies
View Related
Nov 30, 2011
My computer (windows 7 64bit desktop) at the office seems to be not able to connect to internet sometimes even though the cable is plugged directly into the internet port on the wall. Sometimes it works one day and then the next day when I come into office again, and it won't work. Every time I need to do the ipconfig release and renew then it starts to work again. I also heard that my coworker experienced the problem too when using windows 7, but the older computers running on xp never had an issue.
View 1 Replies
View Related
Jun 16, 2011
I'm trying to install Sophos and there fore the following ports need to be open: 8192, 8193 and 8194. All firewalls are disabled. But when I do telnet ip address 8192 (where ip address is the ip address of the problem pc) from the server I'm getting the following error message: Could not open connection to the host, on port 8192, connect failed. It's the same result for the other ports.
View 3 Replies
View Related
Aug 3, 2011
I usually plug the receiver into a certain USB port on my laptop (HP HDX-18t, Windows 7 Ultimate 64-bit) and the mouse works fine. After a while, from an hour to several hours, the mouse pointer will become jumpy and then become completely unresponsive. When that happens, the power light on the receiver is no longer lit. Then I have to disconnect the receiver and plug it into another USB slot. The mouse will begin to work again, but then the same failure occurs. Then I repeat this over and over, "chasing" the ports until I finally plug the receiver into the first USB port again.
I should also mention that when the failure occurs the first time, if I disconnect the receiver and then plug it back into the same slot, I get a "device not recognized" notification in the system tray. This error never occurs with other ports, only the first. Also, I can immediately connect some other USB device to the port(s) the the receiver failed on and they'll work fine.
View 2 Replies
View Related
Mar 15, 2012
I've just bought a new router-modem (lynksys x2000) to replace my old modem.After going through the setup(by using quick install guide CD-ROM provide with router-modem), i've got no internet connection. My laptop can connect to the router-modem but not the internet.Do my new modem have its own firewall?(I know my laptop firewall is running). Do i need to disable the firewall? If yes, which one should i disable, my laptop of modem.
View 9 Replies
View Related
Nov 7, 2012
I was banned by my computer's ip address from a particular website and I wanted to get around that by changing my computer's ip address. My question is will this mess up my internet connection or do anything else unforseen to my computer?
View 7 Replies
View Related
Feb 15, 2012
i have just installed HP WebjetAdmin on a W7 64bit Office Pro installation.It installed fine and is the 64bit version. Since restarting I get the error message The remote device or resource won't accept the connection Detected [URL] The device or resource (localhost) is not set up to accept connections on port "8000". The usermanual [URL] says 8000 UDP O HP Web Jetadmin Discovery Listen: HP Web Jetadmin uses this port on remote IP hosts to detect earlier versions of the HP Web Jetadmin software.8000 TCP I Web Server: HP Web Jetadmin provides an HTTP listener for the initial client launch, Help content, and device file transfer operations. I have Commodo firewall and this program's exe is set as safe, but when i shut Commodo the issue remains?
View 1 Replies
View Related
Apr 30, 2011
I need to move the sata connection for my drive "D" on the motherboard, however after moving it Windows 7 won't boot.
Gateway LX6820, 8GB Ram Windows 7 HOMEPREMIUM 64 bit Drive "C"- Intel X25V SATA SSD 40GB, has 200MB System Partiton for MBR and the rest is for the OS Drive "D"- WD Raptor SATA 150GB, has User folders, Program Data, and Programs installed
I have a fresh install of Windows 7 HOMEPREMIUM 64 bit that was done with drive "D" in one of the hotswap bays. All my tweaks, and settings changes are done and Windows operates with no problems. Now I wan't to move the drive to an internal bay. The set up and install was done using sata 4 on the motherboard but due to cable routing I need to use sata 2 for the move.
After the physical move and cable change Windows sees the Raptor as drive "E" not "D", it can't access the user profile and loads a default profile instead. This default profile won't allow access to disk management so I can change the drive letter. I have tried using Diskpart to reassign the drive letters but when I boot into Windows it changes it back to "E" again (must be due to the sata port 2 being assign "E" in an earlier configuration?). I tried using Windows repair but it changes the boot sector to"C", the "C" drive to "D" and the Raptor to "E", had to change the cables to the original locations and do a system restore to fix that one.
View 2 Replies
View Related
Apr 29, 2011
I need to move the sata connection for my drive "D" on the motherboard, however after moving it Windows 7 won't boot.
Gateway LX6820, 8GB Ram
Windows 7 HOMEPREMIUM 64 bit
Drive "C"- Intel X25V SATA SSD 40GB, has 200MB System Partiton for MBR and the rest is for the OS
Drive "D"- WD Raptor SATA 150GB, has User folders, Program Data, and Programs installed
I have a fresh install of Windows 7 HOMEPREMIUM 64 bit that was done with drive "D" in one of the hotswap bays. All my tweaks, and settings changes are done and Windows operates with no problems. Now I wan't to move the drive to an internal bay. The set up and install was done using sata 4 on the motherboard but due to cable routing I need to use sata 2 for the move. After the physical move and cable change Windows sees the Raptor as drive "E" not "D", it can't access the user profile and loads a default profile instead. This default profile won't allow access to disk management so I can change the drive letter. I have tried using Diskpart to reassign the drive letters but when I boot into Windows it changes it back to "E" again (must be due to the sata port 2 being assign "E" in an earlier configuration?). I tried using Windows repair but it changes the boot sector to"C", the "C" drive to "D" and the Raptor to "E", had to change the cables to the original locations and do a system restore to fix that one.
View 9 Replies
View Related
Oct 19, 2012
I need to configure my Wireless Router N150 2-Port NETGEAR. It does not come with a CD and the installation guide has not been successful so far.
View 1 Replies
View Related
Aug 16, 2012
I have a Verizon router and I purchased a NetGear N900 wireless dual band usb adapter for my son's computer. I was going to test the N900. It is for college.The N900 will not connect. I do have three other laptops that do connect and work ok. The N900 has WPS but the Verizon router does not.So I have to use the SSID, 'wep' option, and the wep key. The N900 tries to connect and stops trying after about 20 seconds or so. The N900 varies from 4 to 5 green bars. N900 installation was followed and went smoothly and the new software version was used. We are using Windows 7 Home Premium 32bit on my son's computer.I also purchased the Western Digital My Net N750 router for college. I have no way to test everything at home. It does have WPS so at the college I hope everything works.
View 2 Replies
View Related
Oct 13, 2012
My laptop cannot currently connect properly to the internet. After trouble shooting, the diagnosis is that "There might be a problem with the driver for the Wireless Network Connection adapter". My laptop also wouldn't connect to the internet via cable. I'm not sure what the problem is as my laptop was working fine last night.
I have Windows 7 Home Premium (32 bit) installed on my Sony Vaio VPCEB36FG.
View 1 Replies
View Related
Apr 30, 2012
My "Microsoft Virtual WiFi Miniport adapter" has disappeared. How do I activate it again?
View 7 Replies
View Related
Jul 17, 2011
On Friday, everything was working as normal on my computer, I was sharing, and the ps3/xbox were on the network and able to play all files. As of saturday afternoon, the networking part suddenly stopped, and I could no longer find my computer on any other device on the network, but I did still have internet capabilities. I didn't think too much into it at the time and figured it was some workgroup error. Saturday night I try to rebuild the workgroup in hopes to fix the problem and also uninstall a scanner that wasn't working. I went to the add/remove programs list, and uninstalled the HP scanner/printer software, and then BOOM, no more internet at all. The other computers and consoles all still have internet, so it has to be something on the computer.
View 2 Replies
View Related
Jan 30, 2011
I have 116 Tunnel adapter Local Area Connectors, how can I remove them?
View 6 Replies
View Related
Oct 13, 2011
I'm running Windows 7 using a DSL line connected via ethernet. I've lost my internet connection, and Windows 7 Diagnostics reports that there might be a problem with the Local Area Connection Adapter driver. Unfortunately, it doesn't say what the problem might be or what to do about it. AT&T has verified that the problem isn't with the DSL line or the modem, and for good measure I bought a new ethernet cable. To make a long story short, I waited too long before considering a System Restore and no longer have restore points available from before this problem started, which was eight days ago. I've visited the Device Manager and the ethernet adapter is enabled and working properly.
View 2 Replies
View Related
Feb 6, 2012
My brothers advent modena laptop stopped working and it turned out it was a hard drive issue. I replaced the hard drive and reinstalled windows 7 32bit. I had to download a iso file from [URL] as he wasn't give a installation disc. The install went fine except when it was finished there was no internet connection available. I tried to troubleshoot but couldn't find any network drivers.
View 3 Replies
View Related