I usually plug the receiver into a certain USB port on my laptop (HP HDX-18t, Windows 7 Ultimate 64-bit) and the mouse works fine. After a while, from an hour to several hours, the mouse pointer will become jumpy and then become completely unresponsive. When that happens, the power light on the receiver is no longer lit. Then I have to disconnect the receiver and plug it into another USB slot. The mouse will begin to work again, but then the same failure occurs. Then I repeat this over and over, "chasing" the ports until I finally plug the receiver into the first USB port again.
I should also mention that when the failure occurs the first time, if I disconnect the receiver and then plug it back into the same slot, I get a "device not recognized" notification in the system tray. This error never occurs with other ports, only the first. Also, I can immediately connect some other USB device to the port(s) the the receiver failed on and they'll work fine.
My laptop won't install my USB mouse when i plugged it into my second USB port. It only works in my first USB port when i first restored my windows 7. I tested using my pendrive in the second port and its working just fine. However, when i tried to use my mouse in the second port, it wont work, even the broadband which I am trying to use in that port.I recalled clicking the option "skip searching for drivers from windows update" coz i was on a slow net at that time and was kinda in a hurry, so yeah. Is there any way to make my laptop re-install the drivers in it coz my wild guess is that I chose not to install it last time so it wont try to auto install the drivers again.
Lately I have been having an annoying problem with my wireless mouse. For some reason the pointer will lag, and be very sluggish and jumpy. I've had this mouse on this computer for about a year and I've had no problem. Out of nowhere this problem is happening. I've tried re installing drivers with no luck. I tried uninstalling intellipoint and re-installing it, but when I tried I got the BSOD, and then it completely disabled my mouse and keyboard so I had to use wired peripherals to go in to safe mode and do a system restore. Now everything is working again, except my mouse is still jumpy.
i'm trying to order something from a website and the cursor want open my cart for me to look at it and finish my order. this is happening in several sites not just one.
I am using the Belkin FD7050 v3 USB adapter. I was having all kinds of problems getting 7 to recognize it and find a network.
I got it work by installing Vista x64, running all windows updates and installing the adapter, then doing an in-place upgrade.
Everything was working great, no wireless problems at all. Then I unplugged the adapter and plugged it back in to a different USB port. Win 7 recognized the adapter right away and installed drivers, but it can't see any networks. Very similar to the first time I installed 7 before upgrading from Vista.
I have since tried uninstalling/re-installing. Letting Win 7 find drivers, manually installing the FD7050 v3 drivers from Belkin. Tried installing the Belkin drivers in XP compatibility mode and Vista Compatibility mode. Nothing works.
I'm trying to not have to completely reinstall Vista x64 and then upgrade to 7 x64 again. Any ideas?
So for several days ive been trying to get a wireless adapter to work on my esktop(windows 7 home premium 64bit). After a D-link xtreme N failed to function, I traded it in for a Linksys AE2500.Both devices failed to install correctly because they could not be detected by the install setup. Manually installing drivers would not work, errors would come up.The AE2500 would be detected when plugged in, then fail to install properly, then refuse any manual drivers. In the device manager it would be error 10, unable to start.It finally worked by a chance of luck, when I uninstalled the ports in my USB list.
So basically it will only function if I have the Enhanced USB ports uninstalled or disabled(it also has to be plugged in at the time of uninstall/disable). Doing so will cause it to automatically install its drivers and start working(it will then immediatly nag, that the USB port isnt 2.0 high-speed and claim that its not functioning at full speed). However, as soon as i reboot the machine, or run an update, or scan for hardware, the Enhanced USB ports reinstall themselves and the Wireless Adapter gets booted back to error 10
I have a Sony Laptop Windows 7 with 3 USB ports one in use with a TV connection and want to add a wireless mouse BUT not using the USB is this possible? if so what is model/make and sources.
I have an HP Pavilion Desktop running Windows 7 Ultimate (AMD processor). Started working this morning and my Logitech USB wireless mouse didn't work. Tried it in another computer and it worked fine. Got a message when I plugged in the dongle that said "one of the USB devices attached to this computer malfunctioned and the computer does not recognize it." I talked to both HP and Logitech. I updated the Logitech drivers (Setpoint 6.20), but that didn't help. HP wants me to do a system restore, which I am loathe to do (the last time it totally trashed my computer).
I do not understand this. I've been buying and returning 'defective' wireless devices for my media center for the last few months. I bought a logitech wireless mouse (v220) a few days ago and it works on my E6410, E6510, Thinkpad T500, NC6230, and custom amd gaming machine.However, on the machine it is intended for use on, it does not work. It seems to work fine (as far as I can tell) in windows. In media center, bridge, firefox, ect... it just doesn't work. You move the mouse, nothing happens, or it moves very spotty.
Okay so not to long ago my laptop's touch pad left click stopped working my left click but I didn't care because I used my wireless mouse for games but 1hr ago I restarted my laptop and now my left click works but my wireless mouse doesn't work so now I'm mad since I hate using the touch pad for games since it's harder and it suckswith this problem I think it's going to be a simple fix.I clicked on Devices and Printers, then I see the mouse and I click troubleshoot and it doesn't find the problem it says it's working fine. I tried the FN + F9 and it disables the touch pad and I do it again and it enables the touch pad but not the mouse does nothing the my problem.
I'm used to periodic lapses when Windows forgets that I have a Bluetooth mouse & keyboard but today's behaviour was really weird.
Fortunately I keep a wired mouse and keyboard strategically hidden just in case.
I just booted into Windows 7 and noticed on the log-on screen that the mouse was behaving erratically - would judder around the screen rather than glide.
Anyway I uninstalled it once I'd booted up and went to reinstall it. It worked but Windows asked for a restart. This had never ever happened before. It even asked for the WEI to be refreshed! I've checked and I can't see anything different driver-wise. I've gone through the motions of uninstalling/reinstalling mouse and keyboard dozens of times but never had this happen.
Running Win 7 64 bit on a Dell laptop. Previously had an older MS wireless mouse that worked fine. Went to upgrade to IE 9, and the mouse quit working. After repeated tries at un-connecting/re-connecting the USB, restarting computer, all met with failure. The system still does not recognize the device in the USB port. Have tried other ports as well with same result.
Being an older wireless mouse, went and purchased a newer HP optical wireless mouse. No driver included to install (no software at all). Same results in each port tried (3 in total) as the previous mouse. Device not recognized and not installed. Plug and play is on per what I can find in the system. New batteries were tried for both devices. Placing the mouse and receiver in different distances between while hitting the 'connect' buttons did no change.
Verified the new mouse is on the compatibility list for Win 7 64bit. Tried running the troubleshooter but it takes me continuously to the device page telling me the device is not recognized and not installed. Tried a system restore to yesterday, before I did the IE 9 upgrade/install (via online). Noticed System Restore said 2 windows updates were done at the time I did the IE upgrade. Completed system restore - no change for either mouse after trying all the above again, with system restarts as well.
I am thinking of getting a wireless keyboard and mouse, probably a Logitech, and wonder if, when I power off the computer, the mouse and keyboard will also turn off? It seems like a setting in Power Setting should offer the choice to do so.
I rebooted my machine the other night and when it came back on, my Logitech EX 100 mouse and keyboard were non-functional.
They (the keyboard, at least) work in bios, when the adapter is plugged into my laptop, both devices work flawlessly, just on my main machine, it's a no-go. This is maddening.
I downloaded the newest Setpoint version from Logitech to no avail, I've disabled and uninstalled all of these usb devices in my device manager, and tried the adapter in every usb port (there are 12) on my motherboard. All other usb devices work fine.
I have recently build a new system , windows 7 ultimate x64 and purchased a microsoft natural ergonomic desktop 7000 keyboard and mouse to use with it , I started it up yesterday for the first time , installed windows useing a wired key/mouse , upon completion shut down and restarted with the USB reciver in place , both worked fine , I then shut down and moved the PC into my office where it was to be used , fired it up , didn't work , tried instaling the drivers no joy , reseting , change batteries , no luck (strange thing though when i install the batteries the battery light glows for a few seconds then fades out , that is on both the mouse and keyboard )I then did a reinstall of windows 7 downloaded & installed the latest x64 drivers but nothing , I have tried it on my other PC (WINDOWS XP SP3) Nothing , i also took the pc back to the other room thinking there may have been interferance from the router etc , but the same nothing .
I have a custon ASUS m48A89GTD MOBO runnin windows 7, and a apple wireless keyboard and magic mouse with a cheap generic USB bluetooth dongle, which runs on a "broadcom 2.0 + USB dongle driver" .The keyboard and mouse pair with no problem, i can restart the pc and re-pair the devices perfectly.However, if i manually remove the dongle and reconnect it, all pairing info is lost and have to re-pair,
While the pc is shut down, the dongle remains lit with a "standby" power supply, If i remove the dongle and reconnect it, even if the pc is off, the problem repeats itself.same goes if i disconnect the pc from the wall outlet.Apparently the dongle has to remain "powered" for it to remember all the pairing and devices info.this is quite annoying, because i have to whip out my wired keyboard to re-pair every time this happens.
I have recently bought a MS Wireless Mouse 5000, and the scroll wheel seems to be a bit flakey. It does not happen all the time, and seems to be worse in some applications (for instance, Safari), than others.
I've just gotten done backing up all the data I want backed up, uninstalled iTunes and all of it's components, ran Windows 7 advisor and am ready to proceed with the custom install but I just wanted to make sure that I would be ok using my existing wireless mouse and keyboard during the install. I have a Logitech S510 keyboard and a Logitech LX8 mouse....would I be alright to begin the installation process with these or should I connect hardwired versions instead
I recently installed new software that requires port 8080 to function. When I try to run the software I get an error that port 8080 is being used.How do I check to see what process is using port 8080 so that I can open up the port to run the software? MACHINE: Windows 7x64
I have read many threads on this, but I cant seem to get my laptop to wake using the wireless kboard/mouse. I have a HP pavilion dv4 with windows 7 x32, and a logitech LX710 Kboard/mouse. I am beginning to think that I will not be able to wake on this laptopAllow this device to turn on computer is greyed out in device manager. I have accessed the bios, but did not see anything that looked like it pertained to this issue. I am far from a computer expert
I have a Microsoft Wireless Mouse 4000 that I frequently carry around. I would like to try using it to play games, but it has serious issues. Outside of a game, the mouse works perfectly fine. In game, the mouse jerks around and stutters, making it utterly impossible to use. It does not occur with any wired USB mouses.
