None of the screen savers work when my wireless mouse is plugged into my laptop.
I'm running Windows 7 ver 6.1 build 7600. The previews work and it works when the mouse is unplugged-- any way to fix this problem?
I do not understand this. I've been buying and returning 'defective' wireless devices for my media center for the last few months. I bought a logitech wireless mouse (v220) a few days ago and it works on my E6410, E6510, Thinkpad T500, NC6230, and custom amd gaming machine.However, on the machine it is intended for use on, it does not work. It seems to work fine (as far as I can tell) in windows. In media center, bridge, firefox, ect... it just doesn't work. You move the mouse, nothing happens, or it moves very spotty.
View 7 Replies View RelatedOkay so not to long ago my laptop's touch pad left click stopped working my left click but I didn't care because I used my wireless mouse for games but 1hr ago I restarted my laptop and now my left click works but my wireless mouse doesn't work so now I'm mad since I hate using the touch pad for games since it's harder and it suckswith this problem I think it's going to be a simple fix.I clicked on Devices and Printers, then I see the mouse and I click troubleshoot and it doesn't find the problem it says it's working fine. I tried the FN + F9 and it disables the touch pad and I do it again and it enables the touch pad but not the mouse does nothing the my problem.
View 4 Replies View RelatedRunning Win 7 64 bit on a Dell laptop. Previously had an older MS wireless mouse that worked fine. Went to upgrade to IE 9, and the mouse quit working. After repeated tries at un-connecting/re-connecting the USB, restarting computer, all met with failure. The system still does not recognize the device in the USB port. Have tried other ports as well with same result.
Being an older wireless mouse, went and purchased a newer HP optical wireless mouse. No driver included to install (no software at all). Same results in each port tried (3 in total) as the previous mouse. Device not recognized and not installed. Plug and play is on per what I can find in the system. New batteries were tried for both devices. Placing the mouse and receiver in different distances between while hitting the 'connect' buttons did no change.
Verified the new mouse is on the compatibility list for Win 7 64bit. Tried running the troubleshooter but it takes me continuously to the device page telling me the device is not recognized and not installed. Tried a system restore to yesterday, before I did the IE 9 upgrade/install (via online). Noticed System Restore said 2 windows updates were done at the time I did the IE upgrade. Completed system restore - no change for either mouse after trying all the above again, with system restarts as well.
Lately I have been having an annoying problem with my wireless mouse. For some reason the pointer will lag, and be very sluggish and jumpy. I've had this mouse on this computer for about a year and I've had no problem. Out of nowhere this problem is happening. I've tried re installing drivers with no luck. I tried uninstalling intellipoint and re-installing it, but when I tried I got the BSOD, and then it completely disabled my mouse and keyboard so I had to use wired peripherals to go in to safe mode and do a system restore. Now everything is working again, except my mouse is still jumpy.
View 3 Replies View Relatedi'm trying to order something from a website and the cursor want open my cart for me to look at it and finish my order. this is happening in several sites not just one.
View 1 Replies View RelatedI have a USB mouse which works fine when it is plugged in at boot time.
When I then (when Win7 is already up) plug the USB mouse out and 10 seconds later back in again then it is not working any more.
Another USB mouse on another Win7 computer does not have such problems.
I have an external LCD monitor connected to my notebook via HDMI. I’d like to be able to turn off the laptop screen or make it go black or run a screensaver ONLY on it, while I’m working/watching a film on my external display. Going into my notebooks settings and toggling from 2 displays to 1, works but is not a process I want to do as frequently as I’m having to do now.
Basically I’d like to be able to turn on and off (or blackout the screen or run screensaver) my notebooks display, as quickly as possible, while not effecting whatever is going on, on the external display.
I deleted these 3 screensavers from my comfuser (each one was found in multiple folders), should I also delete the folders they were in (some folders are now empty)
View 1 Replies View RelatedIn Windows, I only have limited screensavers. Is there a way to activate them all?
P.S. Screenshot attatched of what I mean...
I have downloaded themes, wallpapers and screensavers from [url]... but I don't understand how to get them to run and work.Here is the information I got when I clicked on the Download TSG SysInfo above, Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Pentium(R) Dual-Core CPU T4500 @ 2.30GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3998 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1807 Mb
Hard Drives: C: Total - 290587 MB, Free - 230700 MB; D: Total - 14352 MB, Free - 2372 MB; E: Total - 99 MB, Free - 95 MB;
Motherboard: Hewlett-Packard, 1484, 77.18, CNF021D23P
Antivirus: AVG Anti-Virus Free, Updated and Enabled.
I have had this problem not being able to turn on the wireless radio for months. I have to get it turned on now. When I press <fn> F5 I can see the wireless radio is off. I see the power on button. When I select the power on button nothing happens. I expect the wireless radio to power on.I have tried fixing the winsock. I have run this MS fix at: How to determine and to recover from Winsock2 corruption in Windows Server 2003, in Windows XP, and in Windows Vista And I have run this bat file
** Start of bat file called renew-ip-reset-winsock.bat
ipconfig /release
pause
ipconfig /renew
[code]...
i have a problem with my mouse cursor.... when it is performing something it become busy... right.. and sometimes the mouse cursor will rotate... or the working in background.... it doesnt rotate anymore.. i mean the windows aero scheme.. i am using a windows 7 os... i dnt know what is the problem,.. i alreay have the tuneup utilities 2010.. still no progree.. plls help me resolve my problem
View 9 Replies View RelatedI have a Sony Laptop Windows 7 with 3 USB ports one in use with a TV connection and want to add a wireless mouse BUT not using the USB is this possible? if so what is model/make and sources.
View 9 Replies View RelatedI have an HP Pavilion Desktop running Windows 7 Ultimate (AMD processor). Started working this morning and my Logitech USB wireless mouse didn't work. Tried it in another computer and it worked fine. Got a message when I plugged in the dongle that said "one of the USB devices attached to this computer malfunctioned and the computer does not recognize it." I talked to both HP and Logitech. I updated the Logitech drivers (Setpoint 6.20), but that didn't help. HP wants me to do a system restore, which I am loathe to do (the last time it totally trashed my computer).
View 1 Replies View RelatedI have microsoft wireless notebook optical mouse and it won't work with windows 7
View 4 Replies View RelatedI'm using Windows 7 Home Premium.My wireless connection has been working on and off for a while, but now it just refuses to work.The other computers in the wireless network are working just fine, so it must be definitely something in my laptop.I can detect the network just fine, with good signal.It says:
Media State: Enabled
IPv4 Connectivity: No internet access
IPv6 Connectivity: No internet access
Also, in the activity there are Bytes sent and received, but I cannot connect to any webpage either with Chrome of Firefox I'm using McAfee Security Center. I tried turning off the firewall, but it still doesn't work.
I usually plug the receiver into a certain USB port on my laptop (HP HDX-18t, Windows 7 Ultimate 64-bit) and the mouse works fine. After a while, from an hour to several hours, the mouse pointer will become jumpy and then become completely unresponsive. When that happens, the power light on the receiver is no longer lit. Then I have to disconnect the receiver and plug it into another USB slot. The mouse will begin to work again, but then the same failure occurs. Then I repeat this over and over, "chasing" the ports until I finally plug the receiver into the first USB port again.
I should also mention that when the failure occurs the first time, if I disconnect the receiver and then plug it back into the same slot, I get a "device not recognized" notification in the system tray. This error never occurs with other ports, only the first. Also, I can immediately connect some other USB device to the port(s) the the receiver failed on and they'll work fine.
I have window 7 laptop ie 8 and my wirless mouse is eraseing pages like a blackboard.
View 9 Replies View RelatedI'm used to periodic lapses when Windows forgets that I have a Bluetooth mouse & keyboard but today's behaviour was really weird.
Fortunately I keep a wired mouse and keyboard strategically hidden just in case.
I just booted into Windows 7 and noticed on the log-on screen that the mouse was behaving erratically - would judder around the screen rather than glide.
Anyway I uninstalled it once I'd booted up and went to reinstall it. It worked but Windows asked for a restart. This had never ever happened before. It even asked for the WEI to be refreshed! I've checked and I can't see anything different driver-wise. I've gone through the motions of uninstalling/reinstalling mouse and keyboard dozens of times but never had this happen.
Comments anyone?
I am thinking of getting a wireless keyboard and mouse, probably a Logitech, and wonder if, when I power off the computer, the mouse and keyboard will also turn off? It seems like a setting in Power Setting should offer the choice to do so.
View 8 Replies View Relatedhow can I use my logitech wireless mouse without usb plug?
View 3 Replies View RelatedI rebooted my machine the other night and when it came back on, my Logitech EX 100 mouse and keyboard were non-functional.
They (the keyboard, at least) work in bios, when the adapter is plugged into my laptop, both devices work flawlessly, just on my main machine, it's a no-go. This is maddening.
I downloaded the newest Setpoint version from Logitech to no avail, I've disabled and uninstalled all of these usb devices in my device manager, and tried the adapter in every usb port (there are 12) on my motherboard. All other usb devices work fine.
Why does my wireless mouse freeze up occasionally?
View 1 Replies View RelatedAfter installed Window 7 on my PC, my wireless MS model 1058 start lagging. I have changed batteries on both without any improvement.
View 7 Replies View RelatedI have recently build a new system , windows 7 ultimate x64 and purchased a microsoft natural ergonomic desktop 7000 keyboard and mouse to use with it , I started it up yesterday for the first time , installed windows useing a wired key/mouse , upon completion shut down and restarted with the USB reciver in place , both worked fine , I then shut down and moved the PC into my office where it was to be used , fired it up , didn't work , tried instaling the drivers no joy , reseting , change batteries , no luck (strange thing though when i install the batteries the battery light glows for a few seconds then fades out , that is on both the mouse and keyboard )I then did a reinstall of windows 7 downloaded & installed the latest x64 drivers but nothing , I have tried it on my other PC (WINDOWS XP SP3) Nothing , i also took the pc back to the other room thinking there may have been interferance from the router etc , but the same nothing .
View 6 Replies View RelatedI have a custon ASUS m48A89GTD MOBO runnin windows 7, and a apple wireless keyboard and magic mouse with a cheap generic USB bluetooth dongle, which runs on a "broadcom 2.0 + USB dongle driver" .The keyboard and mouse pair with no problem, i can restart the pc and re-pair the devices perfectly.However, if i manually remove the dongle and reconnect it, all pairing info is lost and have to re-pair,
While the pc is shut down, the dongle remains lit with a "standby" power supply, If i remove the dongle and reconnect it, even if the pc is off, the problem repeats itself.same goes if i disconnect the pc from the wall outlet.Apparently the dongle has to remain "powered" for it to remember all the pairing and devices info.this is quite annoying, because i have to whip out my wired keyboard to re-pair every time this happens.
I have recently bought a MS Wireless Mouse 5000, and the scroll wheel seems to be a bit flakey. It does not happen all the time, and seems to be worse in some applications (for instance, Safari), than others.
View 1 Replies View RelatedI've just gotten done backing up all the data I want backed up, uninstalled iTunes and all of it's components, ran Windows 7 advisor and am ready to proceed with the custom install but I just wanted to make sure that I would be ok using my existing wireless mouse and keyboard during the install. I have a Logitech S510 keyboard and a Logitech LX8 mouse....would I be alright to begin the installation process with these or should I connect hardwired versions instead
View 5 Replies View RelatedCan you tell me the best wireless mouse and keyboard to use with WoW?
View 5 Replies View RelatedAny idea what is causing movement of my wireless mouse to automatically minimize open windows? How can I disable this effect?
View 1 Replies View Related