Internet Wireless Not Working On PC But Working On Other Computers?
Aug 20, 2012
I'm using Windows 7 Home Premium.My wireless connection has been working on and off for a while, but now it just refuses to work.The other computers in the wireless network are working just fine, so it must be definitely something in my laptop.I can detect the network just fine, with good signal.It says:
Media State: Enabled
IPv4 Connectivity: No internet access
IPv6 Connectivity: No internet access
Also, in the activity there are Bytes sent and received, but I cannot connect to any webpage either with Chrome of Firefox I'm using McAfee Security Center. I tried turning off the firewall, but it still doesn't work.
How to delete bonjour file and fix the network problems? Whenever I turn on my pc, I have to wait 1 minute then I have to pull out the Ethernet cable and then put it back in again for the internet to work, I think this is due to bonjour. Also, I think I got it from Photoshop cs3, and bonjour is not in the form of a program but a folder.
The problem I am having is that new computers (direct from manufacturer) are not processing the answer file correctly I have the file set to delete the partitions and build new ones but it does not do so. What I have to do is manually delete the existing partitions that come loaded and once I have done that I reboot and then my partitions prepare correctly. How can I make this work so that it deletes and builds the partitions correctly.
I have had this problem not being able to turn on the wireless radio for months. I have to get it turned on now. When I press <fn> F5 I can see the wireless radio is off. I see the power on button. When I select the power on button nothing happens. I expect the wireless radio to power on.I have tried fixing the winsock. I have run this MS fix at: How to determine and to recover from Winsock2 corruption in Windows Server 2003, in Windows XP, and in Windows Vista And I have run this bat file
** Start of bat file called renew-ip-reset-winsock.bat ipconfig /release pause ipconfig /renew
My cable company said my wireless adapter on my laptop does not work and isn't picking up a signal. They believe I may need to reinstall the wireless driver. I have a hp G60-535-dx and I recently updated Windows 7 and don't know if that caused the problem. My other laptop is a windows Vista and will connect to the internet and they both share a wireless router, however the windows 7 laptop will not connect to the internet. What is the best way to solve this problem?
I installed an Alfa AWUS036H wireless adapter on my Asus u50f laptop. It didn't work, customer support said it must be a defective unit and return.One of the troubleshooting steps I tried was disabling the regular wireless adapter. I tried that and also uninstalling it.Now, I have uninstalled the Alfa driver/utility, and simply want my regular wireless to work again. I tried reinstalling the driver automatically, and also others i found on the net, and none work. They all say device is working properly, but there is a red x on the tray icon and it says no connections and there is no list of networks in range like usual.When I run the Windows (7) troubleshooter, it says there is a problem with the driver but offers no solution.I tried system restore from multiple points, but all say it can't restore (possibly due to AV program). So I uninstalled avast, tried again, and still can't get a restore.
I've just built a new machine running Windows 7 pro SP1 64bit, the mother board is an ASrock N68-S with an Athlon 64X2 dual core 5200+ 2.71 Ghz with 2 gig.I seem to be having problems with the TP-Link TL-WN350GD, I've installed the software but the the troubleshooter is showing "the local area connection" is not working properley and there may be a problem with the driver for the wireless network connection adapter, both items show detected, but the icon on the bottom of the screen has a red cross through it.
I do not understand this. I've been buying and returning 'defective' wireless devices for my media center for the last few months. I bought a logitech wireless mouse (v220) a few days ago and it works on my E6410, E6510, Thinkpad T500, NC6230, and custom amd gaming machine.However, on the machine it is intended for use on, it does not work. It seems to work fine (as far as I can tell) in windows. In media center, bridge, firefox, ect... it just doesn't work. You move the mouse, nothing happens, or it moves very spotty.
Okay so not to long ago my laptop's touch pad left click stopped working my left click but I didn't care because I used my wireless mouse for games but 1hr ago I restarted my laptop and now my left click works but my wireless mouse doesn't work so now I'm mad since I hate using the touch pad for games since it's harder and it suckswith this problem I think it's going to be a simple fix.I clicked on Devices and Printers, then I see the mouse and I click troubleshoot and it doesn't find the problem it says it's working fine. I tried the FN + F9 and it disables the touch pad and I do it again and it enables the touch pad but not the mouse does nothing the my problem.
before I installed my new antivirus and firewall, my wireless connection was working fine. Now when I try to connect, there are no networks to connect to. The wireless light is on and wireless is enabled on the computer I'm trying to connect with, the only problem I'm having is that the network won't show up, before there was a few in the list and now nothing. I've burned some time trying to figure it out,
i have a problem in win 7 on 2 different comp...on 2 dif wireless(an atheros laptop wireless and an atheros usb)i can setup an ad hoc connection with internet no problem....works like a charm but...if the server computer enters to sleep....after resume....the ad-hoc doesnt work anymore...only sais "identify.." and doesnt work anymore....need to make another new ad-hoc connection to make it workthe ad-hoc connection is saved so i can use it another time....but once disconnected i can never reconnect to make it work... i know the ad-hoc network its a temprary connection...but why bother to save it if it doesnt work afterwardsthe command << netsh wlan connect name=Profile2 ssid=SSID2 interface="Wireless Network Connection">> works smooth but its in vain if the connection is not working after reconnect..i said before its not working on s3....but not working on restart either....not even working if i disconnect the host PC and connect it again.
I bought new laptop 15n5050 modeli am using windows7 OS, when i use Ubuntu, then my wireless is working properly, But when i try use windows7, then my wireless is not activate through my wireless switch, I download the wireless driver from dell site, but when i want to install it in my laptop, it says that driver is not compatible.
I have seen this in a couple of forums, but could not find an adequate solution. I am having an issue connecting to wireless networks via the Atheros AR5007EG. I have tried going to atheros.cz among other sites looking for a working driver, but Windows 7 always says the driver is up to date. Strangely, I tooled around a few weeks ago and it was working, but it stopped. I went back and made sure I didn't install anything that day and nothing was installed.
I have a wireless Xbox 360 controller for Windows that I have been using for a while now. I used it with Vista and then with Windows 7.Everything worked perfectly until few days ago...when I tried to turn the controller on (pressing the middle button), the green lights just started flashing and blinking. The wireless receive had not lights on. I tried unplugging the receiver and plugging it back in.It's so weird since I just played LIMBO few days ago with the controller and now it's not working.
Running Win 7 64 bit on a Dell laptop. Previously had an older MS wireless mouse that worked fine. Went to upgrade to IE 9, and the mouse quit working. After repeated tries at un-connecting/re-connecting the USB, restarting computer, all met with failure. The system still does not recognize the device in the USB port. Have tried other ports as well with same result.
Being an older wireless mouse, went and purchased a newer HP optical wireless mouse. No driver included to install (no software at all). Same results in each port tried (3 in total) as the previous mouse. Device not recognized and not installed. Plug and play is on per what I can find in the system. New batteries were tried for both devices. Placing the mouse and receiver in different distances between while hitting the 'connect' buttons did no change.
Verified the new mouse is on the compatibility list for Win 7 64bit. Tried running the troubleshooter but it takes me continuously to the device page telling me the device is not recognized and not installed. Tried a system restore to yesterday, before I did the IE 9 upgrade/install (via online). Noticed System Restore said 2 windows updates were done at the time I did the IE upgrade. Completed system restore - no change for either mouse after trying all the above again, with system restarts as well.
For the past couple of days my keyboard starts to go crazy after about 2 hours worth of use. It will not let me type. And, if I hit a letter it will do something else that it shouldn't. For instance, if I hit the "letter" key it opens the file/save as.
I read a very old post here and tried to do what that said. I changed my batteries, cleaned the keyboard, and even used a different keyboard that isn't wireless. The very same thing happens no matter which keyboard I use.
Sometimes if I wait a few minutes and reboot it is fine again (like right now). This just started happening.
I was using a Microsoft Wireless Mobile Mouse 3500, which has worked flawlessly for me until now, when it suddenly stopped working. I was simply watching a video embedded in a webpage when it suddenly stopped late on the night of October 3rd (a few hours ago). I've downloaded or installed nothing. The mouse is in use 18 inches from the tower. It's plugged directly into the tower. Thinking I would reinstall the device driver I uninstalled it, but now Windows won't recognize my mouse at all.
I previously had Ubuntu installed, but just installed windows 7 professional with service pack1, 32-bit X86 Full.
It seems that I can't connect to the internet though. Not via the wire(LAN) or wireless. When opening up device manager the following is located under OTHER DEVICES:
I recently got a new laptop and I have problems with my home wireless networkWhen both laptops are on and using the network (for browsing, no big data transfers) I'm experiencing big timeouts on one of the laptops (Always a different one). When the third PC is turned on the router even chrashes and needs o be restarted. Both lapops show that signal strength is excellent. The PC is connected via cable
I'm having problems with my wireless networkcard. Sometimes i can connect to the Internet with it but at other times, I am simply unable to connect. Windows detects that there is a problem between my computer, the router, and the Internet. There are five other devices in my house that are able to connect flawlessly. I am currently only able to connect using a wi-fi adapter but this soultuion is awkward as i have only two available USB ports.
I have a HP Pavilion dv6 Notebook PC; for some reason the function button 'f12' for Wireless on/off is not working. My wireless is currently off and therefore I need a way out. Right now f12 is in orange colour indicating wifi is off! I've checked for key issues n found tat the key works fine except to turn the wifi on!
I use Toshiba Satellite L645-S4056. I lost my recovery partition so i installed windows 7 from another DVD. Previously my laptop had home premium but i installed ultimate with a DVD. After installing computer doesnot detect any Network adapter. It doesnot even show wireless adpater in device manager so i cannot install specific driver. I went to toshiba website downloaded an exe file that install wireless driver specific to my model but still it does not recognize. While troubleshooting it says cannot detect any properly installed network adapter. Is it because of home premium and ultimate conflict ?? How do get proper driver and install it?
The connection between your access point, router, or cable modem and the Internet is brokenThe connection between your access point, router, or cable modem and the Internet is broken
The network gateway is accessible, but Windows couldn’t receive network traffic from the Internet. Detected
Your broadband modem is experiencing connectivity issues Not run
The default gateway is not availableThe default gateway is not available
The default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway. Fixed
Reset the "Local Area Connection" adapter Completed Investigate router or broadband modem issues Not run
Issues found Detection details
6 The connection between your access point, router, or cable modem and the Internet is broken Detected
The network gateway is accessible, but Windows couldn’t receive network traffic from the Internet. Your broadband modem is experiencing connectivity issues Not run
Restart your broadband modem: 1. Unplug or turn off the modem. 2. After all the lights on the modem are off, wait at least 10 seconds. 3. Turn the modem on or plug it back into the power outlet. To restart a modem that has a built-in battery, press and quickly release the Reset button. If this doesn't fix the problem, contact your Internet service provider.
6 The default gateway is not available Fixed
The default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
Reset the "Local Area Connection" adapter Completed
This can sometimes resolve an intermittent problem.
Investigate router or broadband modem issues Not run
If you're connected to a hotspot or domain network, contact the network administrator. Otherwise: 1. Unplug or turn off the device. 2. After all the lights on the device are off, wait at least 10 seconds. 3. Turn the device on or plug it back into the power outlet. To restart a router or modem that has a built-in battery, press and quickly release the Reset button.
I recently upgraded to windows 7 professional, and now my network adapter does not work. I have a Linksys WMP54Gv4 wireless network adapter. I checked with Linksys and apparently they don't have windows 7 drivers yet. If anyone knows of any fixes or ways to get around this problem I would really appreciate it.
I have a Dynex Wireless 11G Desktop Card Model: Dx-WGDTC and I cannot seem to find the right drivers to get this card to work. Windows find's the card but will not automatically install it with a generic driver. I am running 64bit home premium.
I have Windows 7 ultimate 64 bit and I need the 2wire 802.11g Wireless USB adapter driver 64 bit version. I can't seem to find it. Apparently the cd I have won't work on installing the drivers on 64 bit version and I can't use the internet in my room unless I have the drivers for it.Everytime I point my computer to look at the cd it says it couldn't find the right drivers. It worked on Windows 7 32 bit and Windows XP and Vista. But it won't work on Windows 7 64 bit. Here is a picture of the device: url...
Yesterday I was using my laptop, everything was working fine, I left it for a couple of hours whilst I went away to do something else, when I came back it was in Standby Mode, I powered on & I noticed that my wireless wasn't picking up my network, I tried multiple restarts, installing the device driver again & switching to switch on the side to no avail it just has a Orange light & does nothing.
Last night my wireless adapter (Atheros AR5007EG Wireless Network Adapter) stopped working. In the properties it says it is working properly, however,it will not find a single wireless network to connect to, only the big red X over the icon in the system tray. My wife's laptop which is 5 feet from mine, finds our network as well as several of our neighbors. I upgraded to Windows 7 last month, so this morning I tried updating drivers, installed these but still the big red X. My laptop will work with the ethernet cable plugged in, just not wireless.I am stumped because it says it is working properly in the properties menu and not returning any errors during troubleshooting. I know its not my router, as my xbox, ipod touch, android phone, and wife's laptop can connect and work fine. Since she and I have the same laptop, I made sure that our properties settings were the same this morning as well, and they match up.
