Could Not Open Connection To Host On Port 8192 Connect Failed

Jun 16, 2011

I'm trying to install Sophos and there fore the following ports need to be open: 8192, 8193 and 8194. All firewalls are disabled. But when I do telnet ip address 8192 (where ip address is the ip address of the problem pc) from the server I'm getting the following error message: Could not open connection to the host, on port 8192, connect failed. It's the same result for the other ports.

ADVERTISEMENT

Windows 7 Update Failed - Internet Connection (Destination Host Unreachable)

Apr 25, 2012

I was applying the some updates to Windows 7 Ultimate 64-bit and the update process failed. I shut down the computer and when it rebooted, the computer reported my Internet connection was down. My computer is still getting an IP address and DNS settings from the router. I can ping 127.0.0.1 but as soon as I try to ping my router I get the destination host net unreachable message

- I have tried uninstalling and reinstalling IPv4 (netsh int IP reset C: esetlog.txt & netsh Winsock reset (both as administrator))
- I have tried uninstalling .NET since that is one of the upgrades that failed.
- I have tried re-running Windows Update to see if the updates which had downloaded would install (failed)

Windows troubleshooter is worthless as it keeps suggesting the network cable is unplugged or broken.

View 1 Replies View Related

What Process Is Using Port 8080 So That Can Open Up Port To Run Software

May 16, 2011

I recently installed new software that requires port 8080 to function. When I try to run the software I get an error that port 8080 is being used.How do I check to see what process is using port 8080 so that I can open up the port to run the software? MACHINE: Windows 7x64

View 9 Replies View Related

WD Nas Ethernet Port Failed - Removed HD?

Feb 20, 2012

How do you make the filesystem visable in windows to recover the data ?

View 2 Replies View Related

Virtual-box On Windows 7 Host Xp Guest Cannot Connect To The Internet

Oct 15, 2012

i have v-box running on win 7 in the vbox i have win xp i have it set on bridge connection i can ping the windows 7 side just fine but i can't ping 8.8.8.8 google and have no internet connection the internet on the host is fine?

the router gateway address is 192.168.178.1
the windows host has a static ip of 192.168.178.107
the xp in the v-box can not connect with dhcp so i have it set manual
to ip 192.268.178.107
subnet 255.255.255.0
default gateway 192.168.178.1
dns 1 : 192.168.178.1
dns 2 : 8.8.8.8
it is bridged with a wireless network
guest additions are installed

View 2 Replies View Related

USB 3.0 External HDD Failed Windows 7 Driver Install On USB 3.0 Port?

Mar 6, 2012

Just got a new Asus Zenbook UX31E and am having a certain problem where if I plug my external drive (Samsung S2 1TB, USB 3.0, 2.5") into the 3.0 port windows tries to install a driver for the new device but fails. Now the drive powers on when connected but wont load up as an accessible drive and is not found is disc management.I've tried the HDD successfully in another laptop with USB 3.0 and it works fine on my Zenbook's USB 2.0 port so I'm guessing there's no problem with the HDD itself. Also I have tried a small flash drive in the Zenbook's 3.0 port which worked fine.I have tried updating the USB 3.0 driver to the latest version via Asus' driver database but have got the same result.I would of thought with such a prestigious laptop someone else would of run across this problem but all my googling has turned up ziltch.

View 9 Replies View Related

Making A Connection With Serial Port

Nov 29, 2009

how can i make a connection with serial port in windows 7 like as i did in windows XP?

View 3 Replies View Related

No Wireless Connection After Changing USB Port Of Adapter

Nov 4, 2009

I am using the Belkin FD7050 v3 USB adapter. I was having all kinds of problems getting 7 to recognize it and find a network.

I got it work by installing Vista x64, running all windows updates and installing the adapter, then doing an in-place upgrade.

Everything was working great, no wireless problems at all. Then I unplugged the adapter and plugged it back in to a different USB port. Win 7 recognized the adapter right away and installed drivers, but it can't see any networks. Very similar to the first time I installed 7 before upgrading from Vista.

I have since tried uninstalling/re-installing. Letting Win 7 find drivers, manually installing the FD7050 v3 drivers from Belkin. Tried installing the Belkin drivers in XP compatibility mode and Vista Compatibility mode. Nothing works.

I'm trying to not have to completely reinstall Vista x64 and then upgrade to 7 x64 again. Any ideas?

View 1 Replies View Related

Internet Connection Not Working Even When Plugged Directly Into Port

Nov 30, 2011

My computer (windows 7 64bit desktop) at the office seems to be not able to connect to internet sometimes even though the cable is plugged directly into the internet port on the wall. Sometimes it works one day and then the next day when I come into office again, and it won't work. Every time I need to do the ipconfig release and renew then it starts to work again. I also heard that my coworker experienced the problem too when using windows 7, but the older computers running on xp never had an issue.

View 1 Replies View Related

Cannot Open A Port

Dec 16, 2009

I have spent the last two hours trying to open a port for a remote control application.

I have tomato 1.27 running on an asus wl500gP router.

I am running windows 7 ultimate

i have an Arris voip modem through comcast

The problem is this, i forwarded the port correctly in tomato yet the port is still closed. I have tried the following:

Enabling DMZ

Disabling windows firewall by either the control panel or through services.msc

Enabled UPNP in the application, it opens the port according to tomato yet external port testers still say its closed

reset the router and pc numerous times

hard reset the router

Hooking PC directly into cable modem

I believe that this is strictly a windows 7 issue now as the router is out of the equation. The only security software I have is Avira free edition, windows defender, and (disabled) windows firewall.

Can anyone give me help as to why I cannot open a port? It would be greatly appreciated as I am leaving for a trip in 36 hours and would like to be able to remotely control this application.

View 0 Replies View Related

How To Open Port 80

Sep 10, 2012

I need to open port 80 on my computer. I turned off my router's firewall for testing reasons and port 80 opened but i dont want to keep the firewall down. My router is an XMR100. How I can make an exception for port 80?

View 1 Replies View Related

Connect A SATA Drive To An ESATA Port?

Dec 25, 2011

I bought a cable with ESATA on one end and SATA on the other end. What am I supposed to do with it? I connected a standard SATA drive to one end and the other end to the ESATA port on the back of the computer, and used an external power supply for the drive. The BIOS does not see the drive. Suspecting the drive needed to be powered from the same power supply as the computer, I plugged the drive into a normal power connector in the computer, but used the new cable to connect it to the external ESATA port. Still the BIOS sees nothing. The drive works perfectly as a SATA drive in the normal SATA connection.

View 9 Replies View Related

Check If Port Is Open From CMD?

May 4, 2012

I would like to know if there is a way I can test if a specific port is open on an IP address and if my PC can connect to that port? How do you do this from Command Prompt? 'telnet iport' does not seem to work since it just says 'telnet' is not recognized as an internal or external command.

I do not want to use a website to do this, since they will test if they can make a connection from their servers to the ip port in question, not if the port between my IP address and the ip in question is open.

I know about NMAP and Netcat, but don't know how that works.

View 8 Replies View Related

Error 633 Open Port

Nov 19, 2009

When i dial up, i get some Error Message 633 message about COM port being used by other application or modem not configured properly.

In device manager the modem seems OK, and i dont know of any other device using a COM port. I've tried different drivers, swapping the modem around inside the case but no joy and i'm getting really annoyed now.

View 2 Replies View Related

How To Open Port 443 For Windows 7

Jan 25, 2012

I cannot open msn games, hearts, how do I open port 443 for windows 7?

View 1 Replies View Related

How Do I Open Port For Warcraft 3 ?

Mar 3, 2010

im trying to host on WC3 and i went to portforward.com, but i still cant host. when i used a port checker it ways that the port is closed, any help would be nice.

View 2 Replies View Related

Genesys Logic USB Host To Host Bridge Driver

May 8, 2009

Does anyone know where I can get a Genesys Logic USB Host to Host Bridge Driver?

This device works fine under Vista on my other partition, however, when I try to install the driver from my Vista partition device manager finds it, starts the install, and then fails (it says a service installation section in this INF is invalid).

View 6 Replies View Related

Dual Monitor - Connect TV To Laptop Through HDMI Port

Sep 2, 2009

i tried to connect my TV to my laptop through the HDMI port.

but under the screen resolution there is only my main screen.

View 8 Replies View Related

Can't Open Ports (port Forwarding)

Nov 30, 2012

For the past 3 days Ive been trying to open up ports in my router (Siemens sx763) with no luck. Ive done all the port forwarding correctly but when i check the port from a website it say my port is blocked. I use a wireless connection. I think ive done my other router/connections/ip settings wrong but im not sure what it is.

MiniToolBox by Farbar Version: 25-11-2012
Ran by Marko (administrator) on 30-11-2012 at 15:26:27
Running from "D:\Internet"
Windows 7 Home Premium Service Pack 1 (X64)

[code]...

View 1 Replies View Related

The Remote Device Or Resource Won't Accept The Connection And Port 8000 + HP Webjet Admin

Feb 15, 2012

i have just installed HP WebjetAdmin on a W7 64bit Office Pro installation.It installed fine and is the 64bit version. Since restarting I get the error message The remote device or resource won't accept the connection Detected [URL] The device or resource (localhost) is not set up to accept connections on port "8000". The usermanual [URL] says 8000 UDP O HP Web Jetadmin Discovery Listen: HP Web Jetadmin uses this port on remote IP hosts to detect earlier versions of the HP Web Jetadmin software.8000 TCP I Web Server: HP Web Jetadmin provides an HTTP listener for the initial client launch, Help content, and device file transfer operations. I have Commodo firewall and this program's exe is set as safe, but when i shut Commodo the issue remains?

View 1 Replies View Related

Connection Failed: Error Code 23 - Raidcall

Nov 7, 2012

(I was going to post this in the software section, but I assumed since it pertains to the network portion of the application and that I can connect through a VPN, that the problem is LAN Network oriented)I recently installed the software Raidcall (RaidCall-100% FREE Group Communication Software- IM, Group Communication and Voice Chat) which is a program designed to be a cross between Skype and Ventrilo. I avidly registered and the process went smoothly. That was all until I came up to login screen where after entering my information, I got the following error: Connection Failed. please try again later (Error code:23). Does this have something to do with Cyclic Redundancy Checking? That's the only information I could come up with. I've done as much research as I can think of, sent them an email with lots of information (no response as to the answer yet), and also asked on their forums but no dice.

Background information (I can provide more if needed)

- On a University Campus ( Technical Information | IT | Indiana Wesleyan University )

-I"m connected directly through to their wall. I"ve also tried swapping out my own cables to no avail.

- Have done an Error Checking Check for both drives (for CYC relation - which I think it may be the culprit (I"m not tech savy though hence my forum post)

- I CAN connect to it through a VPN (Hotshield) - obviously I don't want to have this be my way of connecting through it because I want to use Raidcall while playing (World of Warcraft) and it gives me horrible latency.

- I've called my IT support here at school, and they didn't think it would be something on their end. Although the guy on the other end did not sound intelligible at all.

View 2 Replies View Related

Internet Connection Sharing Failed To Start?

Mar 8, 2010

I have problems with internet sharing. My laptop is connected to my home network wireless, and my x360 is connected to my laptop with a Ethernet cable. Now i can't turn on ICS. I get a error message "An error occurred while Internet Connection Sharing was being enabled. The dependency service or group failed to start"

I have also checked services.msc and ICS is set to manual, I've tried to set it automatic and restarted my computer, after reboot ICS is set to manual again. Can't force start, error message "Windows could not start the Internet Connection Sharing (ICS) service on Local Computer Error 1068: The dependency service or group failed to start"

View 9 Replies View Related

Online Port Checker Sites Saying Ports Aren't Open?

Sep 6, 2012

I googled how to open ports and it told me go in to windows firewall>advanced setting>new rule etc. I want to install a game so I need certain ports to be open and unrestricted. When I used online port checker sites they all say the required ports aren't open

View 2 Replies View Related

Failed To Connect To A Windows Service

Feb 8, 2011

I booted my computer this morning and I could tell that something wasn't completely right. It took an incredibly long time to get to the user account selection, didn't play the startup sounds, and when I finally log in, the Windows Aero theme had been set to the classic one similar to Windows 2000. I tried to restart the computer and it couldn't do it because it was waiting for the log off sound, which wasn't playing. I clicked force restart and the computer just sat at the desktop. After a hard reboot, I started Windows normally and in the lower right corner I got a message saying that Windows failed to connect to a Windows Service.

View 1 Replies View Related

Failed To Connect To A Windows Service

Nov 1, 2012

Turn on computer and it loads pretty normal. A few times it took a long time.In the incon tray notification pops up and says:Faild to connect to a windows serivce. Group Policy CLient service....prevents users from logging on ... as an admin look in event log.This is my home/personal computer and there are NO other users?!?Not sure what the hec this error is.It goes away after a minute and the computer runs fine.I have Avast internet security, malewarebytes running. Did scans with same with negative results.Also ran TDSSKILLER, Superantispyware, and spybot also with negative results (other than cookies)Googled and goggled some more...tried to change/add a registry setting to delay the Group Policy Timeout as seen in this workaround: [URL]but the issue is still here...

Specs:

Windows 7 Home Premium 64bit

View 5 Replies View Related

Failed To Connect To Windows Service

Jul 4, 2010

"Failed to connect to a windows service. Windows could not connect to the System Event Notification Service. This problem prevents limited users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond." [URL]

View 9 Replies View Related

Failed To Connect To A Windows Service Error

May 23, 2012

After I downloaded some windows 7 updates I now get this error:[URL]

- When I turn the computer on windows takes a long time to load, about 5 times longer than usual

- My keyboard now does not work (tried others to be sure)

- I have no internet now (this is related to the error, I have read other cases)

The first thing I wanted to try was the winsock reset, but I do not have a keyboard to type with in the command prompt.I have:

OS: Windows 7 home premium 64bit
MOBO: AsRock z77 Pro4-M

View 3 Replies View Related

Failed To Connect To Windows Notification Service

Mar 5, 2012

After turning on my computer today it fails to connect to the internet or windows service. My computer doesn't acknowledge my internet network and now at the bottom right of my desktop says Windows 7 is not genuine when it is. I did a system restore several days back and the problem still persists. I just failed to use Malwarebytes even in Safe Mode + Networking because it is now corrupt, missing files, or mabservices is down. I did a virus scan with indexes last updated feb 28th and found nothing.

View 7 Replies View Related

Cannot Send Email In Windows Live - Connection To Server Failed

Apr 3, 2012

I just baught a HP Pavilion dv6 laptop with Windows 7 and am connected to the internet via my wireless remote. I can surf the net so I know I'm connected. I am supposed to have my email set up so that what I receive in my inbox on my desktop also shows up in my inbox on the laptop. I can send and receive fine on the desktop (Windows XP & Outlook Express), but when I try to send and receive mail in Windows Live on the laptop, I get this error messaage:

The connection to the server has failed.
Subject 'test'
Server: 'smtp.att.yahoo.com'
Windows Live Mail Error ID: 0x800CCC0E
Protocol: SMTP
Port: 425
Secure(SSL): Yes
Socket Error: 10060

I occasionally will receive messages, but I can never send.

View 2 Replies View Related

No Internet Connection After Virus Removal, Chrome Says DNS Lookup Failed~

Oct 23, 2012

Our PC internet quit working a few days ago. Our wireless laptop and Ipods work. After some (hours) of playing, I noticed our homepage was set to something Babylon. So realized we had some virus issues after research. I have run SpyBot S&D, SAS and Malwarebytes- all came up with some various serious threats. CouponBar, Babylon, I want it! etc. These programs seemed to have removed all the problems, but I still do not have access. My LAN can find my network, but says "no internet access" the wireless does not connect either on this PC.

My computer knowledge is minimal but after comparing various ipconfig screens, it seems to have something to do with the IP addresses. I read that 169.254...is not good. I disabled IPV6 and when obtaining IP addresses automatically didn't work- I typed in the ones listed on the details part of the adapter. Here is a screen shot of my IPconfig/all with LAN only: Windows IP Configuration Host Name . . . . .. . .

[code]....

View 2 Replies View Related

Failed To Connect To System Event Notification Service

Sep 5, 2012

This Error popped up on my Screen today My Nvidia control panel, among other programs do not seem to start with windows any more ( i noticed this right away because my screen configuration had changed)I have checked the service and all of its dependencies and all of them are working fine.

View 9 Replies View Related

Failed To Connect To Windows Service / Slow Boot?

Nov 25, 2012

how do you disable this warning failed to connect to a window service

View 1 Replies View Related

RW2 Files Failed To Display Or Open

Feb 8, 2012

I have been working with RW2 files on this PC without problems for 6 months and all was normal last night when I shut down as normal. This morning I switched on to continue my work and the window with RW2 files showed just blank icons. I clicked on one and got the message "unable to open this file type, no supporting program" or similar, usually it opens a preview window at the side and will open in Windows photo viewer with a double click, but now nothing. JPG files still display and work fine and all the RW2 files open normally in lightroom 3.6 when I open that. I rebooted but the problem persists. I then looked at system restore and there were no restore points for this month and it gave a list of 5 programs it would erase, which I had updated/installed a few days earlier so I decided to look for another way first (I have very bad internet so do not want to have to download those again). Everything has worked fine with those updates for several days so I suspect it has nothing to do with them.

View 2 Replies View Related

Windows Cannot Connect To The Printer - Operation Failed With Error 0x0000007e

Jul 14, 2011

I have a Dell laptop with Windows 7 Ultimate. While trying to add a network printer (HP LaserJet 4250n) I got the following error message: Windows cannot connect to the printer. Operation failed with error 0x0000007e.

The printer works fine from my Windows 7 Pro desktop, and also from other laptops with Windows 7 Ultimate.

I've tried installing Microsoft's hotfix (982728), installing locally on LPT2 and running 'net use LPT2 \Computernamesharedprintername /persistent:yes', updating the driver. None of these worked.

View 4 Replies View Related

Failed To Connect To Windows Service - Standard User Cannot Login

May 5, 2011

"Failed to connect to a windows service. Windows could not connect to the System Event Notification Service". This problem prevents standard users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond. This is the error message I receive when I log on to my computer. It doesn't seem to happen every time I log on but probably 50% of the time. When this error appears the only things I seem to notice differently are that the audio doesn't work and the windows tool bar's graphics are basic (as if i was in safe mode).

View 5 Replies View Related

Windows Cannot Connect To The Printer Operation Failed With Error 0x00000002

Aug 15, 2012

I have two computers I want to connect to a network printer. The printer is a Konica Minolta. When I try to connect it to these computers I get:windows cannot connect to the printer operation failed with error 0x00000002 Both computers are windows 7 and previously were connected to the printer. I had to reinstall the OS on both machines thus the reason Im reconnecting the printer to them. The computers are attached to our domain. Other computers in the office are able to connect to and use this printer.

View 1 Replies View Related

Failed To Connect 'Group Policy Client Service' Windows 7

Nov 19, 2012

Someone out there please help me. I've been working on this problem for like 6 hrs.Failed to connect, "Group Policy Client Service" windows 7. Failed to Connect with "Group Policy Client Service".I copied the message and saved it as an image. I also ran dds and attach report.

View 14 Replies View Related

Failed To Connect To System Event Notification Service / Slow Boot

Apr 30, 2012

* Boot computer
* Windows boot screen displayed ~ 1 minute
* screen goes black. Can move mouse. Drive light constantly on, not blinking. ~ 5 minutes
* log in screen comes up / log in
* Desktop loads ~ 1 minute
> sometimes it loads with regular windows aero theme other times it loads with basic windows classic theme.
* Error message pop up "failed to connect to System event notification service"
* Have to wait for about 5 more minutes before computer is actually usable
* Occasionally the audio service does not work as well...

From when I press the power button to when I can actually use my computer takes 10 - 15 minutes.

View 14 Replies View Related

Failed To Connect To System Event Notification Service / Slow Boot

Apr 22, 2010

My computer recently started having issues........ here is what is going on:

* boot computer
* Windows boot screen displayed ~ 1 minute
* screen goes black. Can move mouse. Drive light constantly on, not blinking. ~ 5 minutes
* log in screen comes up / log in
* Desktop loads ~ 1 minute > sometimes it loads with regular windows aero theme other times it loads with basic windows classic theme.
* Error message pop up "failed to connect to System event notification service"
* Have to wait for about 5 more minutes before computer is actually usable
* Occasionally the audio service does not work as well...

From when I press the power button to when I can actually use my computer takes 10 - 15 minutes. Here is what I have tried so far:

* Turning off all start up programs / services
* Uninstalled AVG anti virus
* PC Tools Registry mechanic registry clean up
* Tested Memory - passed
* Hard Drive Self Test ---- # 1 - 7 fail / #10008 Fail > I am guessing that this is the source of the problem, however my computer does still work once everything is finally booted. So I don't know what to do with that information or if that test even matters.
* I have tried looking at the event viewer but every time it says that the event log service is unavailable > I try turning on Windows Event Log but that does not change anything
* I tried "netsh winsock reset" in command prompt, based on a different thread that I found - it didn't work

Possible useful information:

Windows 7 Professional x64 upgraded from vista
Avg Anti Virus
PC tools Registry mechanic
HP pavilion dv2000 (dv2915nr)
Intel Core 2 Duo: T5550, 1830 Mhz
4gb ram upgraded from 3 gb

View 2 Replies View Related

Cannot Connect To WiFi Connection

Oct 9, 2011

I cannot connect my laptop to the wifi connection. Its showing like check whether the wifi connection is in range...

View 2 Replies View Related

How To Connect Wi-fi Connection For Mobile

Mar 29, 2012

I am able to connect to a wifi network my problem is that i dont know what to do next to get internet access thru that wifi network.

View 1 Replies View Related

"Not Supported Mode" When Trying To Connect PC To Samsung Tv Via Display Port?

May 21, 2012

I'm trying to connect my PC to my TV. I'm using the display port on my Lenovo thinkpad, and using a converter to connect an HDMI cord from my computer display port to my TV. However, when connecting, I get an image on my TV screen for several seconds, then I get the message "not supported mode."I've got into my control panel and adjusted the screen resolution, setting the TV resolution to highest (1920 x 1080). The computer screen is set at a refresh rate of 60hz, but the only option I have for the TV is 30hz, interlaced.Lastly, I have three hdmi ports on the TV. The closest I've gotten to getting this to work is plugging the HDMI cord into port 3, which is set as "game" on the TV settings.

Does anyone have any further recommendations on how I can get this to work? When the image shows for 5 seconds on the first port, it's very clear, but then goes to "Not Supported Mode". The third port shows the image, but is very fuzzy with lines shaking across the screen, so clearly, neither of these options are currently working.

View 2 Replies View Related

Remote Desktop Connection Cannot Connect?

Jun 2, 2011

i would like to connect using RDC from my netbook (using windows 7 starter) to my desktop (using windows 7 professional) on the road.

i have followed all the steps here: Allow Remote Desktop connections from outside your home network when i try to connect i get the dreaded "remote desktop can't connect to the remote computer" error message.

View 9 Replies View Related

Unable To Connect With Wireless Connection

Jun 24, 2012

I have Windows 7 and have a wireless internet set up. If someone else connects to the network, I cannot connect with my computer. The network is encrypted, WEP I believe. The password is 26 digits long (don't know if that helps)

View 4 Replies View Related

Remote Connection: Can't Select Who Can Connect

Jun 27, 2011

I have 3 computers with Windows 7 Pro.

I can use remote control between 2 of them, but I can not connect from any of those two to the third one. All the services needed for remote control are running, and I have tried several tutorials on how to set up remote control...and nothing. Again, only on third computer remote control does not work. On that computer I have 2 accounts: one standard and one admin. I have put admin account under "Select users" and did not help. Tried with enabled Administrator account and nothing. Below you will see the picture which describes the problem. I can not select who can connect.

View 3 Replies View Related

ADVERTISEMENT