I have a Verizon router and I purchased a NetGear N900 wireless dual band usb adapter for my son's computer. I was going to test the N900. It is for college.The N900 will not connect. I do have three other laptops that do connect and work ok. The N900 has WPS but the Verizon router does not.So I have to use the SSID, 'wep' option, and the wep key. The N900 tries to connect and stops trying after about 20 seconds or so. The N900 varies from 4 to 5 green bars. N900 installation was followed and went smoothly and the new software version was used. We are using Windows 7 Home Premium 32bit on my son's computer.I also purchased the Western Digital My Net N750 router for college. I have no way to test everything at home. It does have WPS so at the college I hope everything works.
I have two Windows 7, two win xp (4 in total) connected as file sharing network.1. hen I turn the router off and then on, the win xp computers see all the rest, but Windows 7 computers see no one, they still have the internet ability.2. If I turn on the Windows 7 computers first: the 1st sees nobody, the second sees the first but not the consecutive computers. No home group.
My laptop cannot currently connect properly to the internet. After trouble shooting, the diagnosis is that "There might be a problem with the driver for the Wireless Network Connection adapter". My laptop also wouldn't connect to the internet via cable. I'm not sure what the problem is as my laptop was working fine last night.
I have Windows 7 Home Premium (32 bit) installed on my Sony Vaio VPCEB36FG.
I tried to update avg on hubs laptop so the kids can play and now after I did it we can't get online period!! on the tool bar were the connection pic is says limited connection? So I did all of the steps to fix ect and it finally came up to.
- There might be a problem w/the drivers for the wireless connection2 adapter - There might be a problem w/the drivers for the local area connection adapter
MY actual modem is good as we have 3 running right now - should I go to restore point before avg in the critical update moments before I realizes this problem?
"Problem with the driver for Wireless Adapter".I have an HP-Pavilion 2009f with Windows 7 home premium 64-bit. All has been fine with my internet connection, except for a few drops here and there, but all in all it has been tolerable. When I went to bed last night it worked, when I woke up, it didn't. When I troubleshoot I get the message, "There might be a problem with the driver for the Wireless Network Connection Adapter", to which Windows cannot fix. I get this same error message, respectively, for both wired and wireless connections. After troubleshooting without success, I decided to try and do system update.I am only connected with "Limited Access".What's even weirder is when I open a cmd window and enter ipconfig /all.
As you can see today when I got on my laptop I wasn't able to connect to the Internet and after attempting to troubleshoot I got this error message along with one saying a network cable is not properly plugged in or is broken. We recently switched Internet service providers and the Internet has been running fine. The only proble I had was sometimes it would randomly drop in speed but I don't think that has anything to do with the issue. Last night it was working perfectly, but then it went slow so I unplugged our router and then disabled the wireless network then reeanbled it. Anyways I've been using this network for a few months now without issues but I think the issue lies within my computer. I checked for windows updates and installed them but no luck. Then I checked for driver updates for my adapters but they were up to date. I don't have any screenshots and I'm on a tablet. Also please use the simplest terms possible because while I have a basic understanding of these things, I'm no expert and I don't want to miss anything
My brothers advent modena laptop stopped working and it turned out it was a hard drive issue. I replaced the hard drive and reinstalled windows 7 32bit. I had to download a iso file from [URL] as he wasn't give a installation disc. The install went fine except when it was finished there was no internet connection available. I tried to troubleshoot but couldn't find any network drivers.
I have Brother MFC7340 printer connected to my HP home premium Windows 7 64 via a USB port. There is no ethernet connection. I want my Windows XP computer, connected to the local home network via ethernet hard connection through my wireless router to be able to print either with a hard connect or wirelessly to this printer. I am having trouble figuring out what to do and have tried various strategies to no avail.
When I problem solve it the message is to update and it is the driver for wirless nedwork connector adapter. I have both windows 2007 and 2010 sharing. I can get on the internet by pluging into it and my adress shows as well. Windows 2007 is continually configuring which is getting very old. I tried recovery 3-4 times and it will not recover to a passed date.
Some server game banned my macaddress (NIC).So now I can't login this game with my lan card (Local Area Connection) in my windows but I sloved problem by play that game in VMWARE that have a virtual network adaptor with a new macaddress Question is if it possible to create virtual network adaptor with new macaddress in my windows7 , Not in vmware or vitual pc etc...Because I want to play this game in my windows but this server banned my lan card myaddress I need a new connection that have a new macaddress like vmware network adator.
For some reason my router and modem will not show correctly on my dell inspirion one desktop. Im running windows 7 and here are the net work connection deatils
Connection -specific DNS Belkin Description Realtek PCIe GBE Family Controller Physical Address 00-00-00-00-00-00 DCHP Enabled Yes Ipv4 Address 192.168.2.2 Ipv4 Subnet Mask 255.255.255.0 Lease obtained Wednesday, November 10, 2010 9:45 PM Lease Expires Sunday, December 18, 2146 4:17 AM IPv4 Default Gateway 192.168.2.1 Ipv4 DHCP Server 192.168.2.1 Ipv4 DNS Server 192.168.2.1 IPv4 WINS Server NetBIOS over Tcpip enabled Yes
The Connection was working about ten days ago and then suddenly stopped and read as an unidentified network no internet access. at one point is was not receiving packets but now it is but it still says no internet access on the IPv4 Connectivity. Media state is also enabled and the speed is 100.0 Mbps when i troubleshoot it says windows cant identify problem but in the details it says default gateway is available. when i use the cmd prompt ipconfig/all my local ethernet adapter has a physical address of all zeros.
i downloaded the free edition of Oracle SQL Developer for 32-bit Windows (This zip file includes the JDK1.6.0_11) - though i run 64bit - windows 7 After extraction, i double click sqldeveloper.exe under new connection window what should be my inputs for connection name, username, password,hostname, port, sid when i give sample inputs and test for connection it throws "Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection" how to establish a successful connection
I started getting a "DNS not responding"? on my desktop. All my wireless devices work fine, and when I turn off my laptop's WiFi card and plug it into the same router it works as well.I've done some Googleing on the issue and none of what I found has helped.When I do an ipconfig on each maching, the thing I notice is that on the working laptop I have an entry for the "Connection specific DNS suffix under the "Tunnel adapter Local Area Connection", where on the desktop that's not working the suffix is blank.
I will be buying a new computer (64 bit). I currently run a 3.5 year old Dell (32 bit) with XP Pro and connect wirelessly with a DLINK router and adapter (DLINK DWA 130 Rev C) which is an N router, which replaced a G level router about 4 months ago. Would it be possible to download a driver that will work on the new machine now, or should I bite the bullet and add an adapter to the new computer? I emailed DLINK and have had no response.
I have an Acer laptop running Windows 7 SP1 64bit. Worked fine until last week. Now will not connect to router.Network centre says ;no internet connection' and 'unidentified network , public network This happens both via wifi and cable connection.I have another router on another line. Same failure messages when I connect the laptop ( wifi and cable)I also have a PC running Windows 7.Connects perfectly to both routers via either method.I an running 'Bullguard' have disabled - no affect.
I do a lot of tech support for my family, however I'm a bit stumped a family member presented me with a problem on her hp netbook. She has verizon internet which is dial up and has a belkin router broadcasting the signal. Today however she was unable to connect. Usualy a box would pop up when she would connect to the network or a notification window would come up saying it is connecting to the dial connection. The window did have a box to check or un check asking to do it automaticaly, My question is how would i go about checking the box again and connecting the dial up connection?
I am trying to set up WPA security on my new Dell Inspiron Laptop,When I go to "Help and Support" for instructions it says:"The Set Up a Network wizard will guide you through setting up a security key.Click to open Set Up a Network."My problem is when I "Click to open Set up a Network" it only shows my neighbor's router [A Linksys WRT110]. My Netgear WGR614v6 does not show up as an option to connect to.
At this moment my PC is wired straight into my modem for internet access. I am however considering plugging it into the router as well in order to access my NAS, enable network printing and what not.The problem that might be is that the router is also providing internet connectivity and thus I will face the problem of having 2 internet connections open.Is there some way for me to tell windows 7 to use the "straight" connection over the router one?. Meaning it will use the straight one to connect to the internet and this not pass that traffic through the router etc.?
I have both of these things and my recent internet still come up on my laptop, how can i connect or use my router to get wifi, need this for work asap.
I've just bought a new router-modem (lynksys x2000) to replace my old modem.After going through the setup(by using quick install guide CD-ROM provide with router-modem), i've got no internet connection. My laptop can connect to the router-modem but not the internet.Do my new modem have its own firewall?(I know my laptop firewall is running). Do i need to disable the firewall? If yes, which one should i disable, my laptop of modem.
I have been having a problem with my Desktop for about a week now. It is running Windows 7 Home Premium 64-bit. No built in wireless adapter, but using a USB TP-Link TL-WN722N wireless adapter. The computer can connect to the network, but the internet connection just stopped working. My cell phone, xBox, and Wii can all connect just fine and have internet connectivity. I have already tried:
I have a customer that has just installed a new Dlink N300 router and cable modem internet. He has both a desk top which is hardwired to the router and a laptop which is using the wireless. The desk top does not have any problem with a connection but when he buts the laptop in hibernation it can not find the wireless connection. The odd thing about it is that even though he can not find his own network he can see other networks around him. Any ideas out there on how to solve this issue. This is the second router that we have installed so I am guessing it is not defective equipment.
I have been struggling with my pc dropping internet connection and not seeing the router as well as it freezing at random times, from 5mins use to several hours, but lately its alot more. Its a cyberpower system machine I bought in oct 2008, its had ALOT of use. See below for system specs below please if needed.It will freeze at all sorts of times, does not matter which application I have open. I have to hard reboot. It will also freeze on shutdown sometimes. I get all sorts of errors on connection loss, it will say the default gatway not available, it will ask me to reset my router too. It resets Local Area Connection adapter all the time, when I try to resolve the issue. It also says "Local Area Connection" doesn't have a valid IP configuration, and resets all my settings back to Obtain IP addresses automatically, as well as Obtain DNS server address automatically in the Internet Protocol Version 4 settings. If I put all the IP addresses and default gateway stuff back in without resetting the router, it then says Troubleshooting couldn't find the problem. Resetting the router usually does work. But not always, sometimes I need a restart. It Sometimes it works if I restart, sometimes it still won't see the router.
I tried putting the IP address in as static, put in the subnet mask, and default gateway.I use the Preffered DNS server IP in there as it helps use network gaming and platforms better like SecondLife.I've tested the router network with same cable I use on another laptop so the cable is fine.Changed ASDL filters twice.Bought new router.I've replaced my harddrive.I've tried two different driver versions for my network card which is a Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller I've resit my memory.Tried restoring system to a few days before it started freezing again.I've reinstalled windows a few times now, usually it works for a while (week or two) after a fresh new install. Its a fresh new windows 7 I bought as the machine came with vista.I've manually tried to put in all the drivers I need myself as I don't have the disk that came with my machine. (I have no idea if I've done that right)Sent it in for a service clean and checkup.Turned off the option that windows shuts my network driver down to save on power.
SYSTEM SPEC:
(Left out actual IP address numbers from communication, I have no idea if that is safe to forum lol*) Operating System new - server roles Windows 7 Home Premium (x64) Service Pack 1 (build 7601) Install Language: English (United States) System Locale: English (United Kingdom) Installed: 04/11/2011 00:49:01
I am trying to set up the wireless internet. I am not super tech savvy, however, over the last decade I have been able to research and fix all of my computer problems myself without posting such things. Until now.
I need to set up the wireless router; however, I cannot get the LAN connection to even work with the router.
The error is stating "DNS server is not responding"
I work as a software developer and have had a lot of experience with wireless networking. I have an old wireless router (unsecured at the moment) that I have connected to a modem, provided by Virgin media. When I use a cable to directly connect to the router, all seems fine, but when I attempt to connect wirelessly I am almost immediately presented with "Windows was unable to connect to [router name]". Other people in my house (on both XP and Vista) can connect to the router without any problems, implying that it is a setting within Windows 7. HOWEVER, I am able to connect to another (unsecured) wireless router. I guess this can only mean that there is a setting on the router that is preventing me from connecting...
For the last few days of an evening after downloading large amounts of data using Bit-torrent i.e. 70GB, I keep losing my internet connection. I need to turn my super-hub on and off again, but it will keep losing the connection. I have noticed that if I exit Bit-torrent then I don't lose my connection, but I am not sure whether this is just a coincidence. Is this because of the amount of data I am downloading using Bit-torrent and my super-hub is turning off the connection on purpose or is this something else?
