I cannot find an answer to this, why this is happening, done several installations of Windows 7(32 or 64 bit) but it will never show correctly the boot animation. It only does show it when it wakes up from sleep, which the computer fails to hibernate or enter sleep mode.
An example of what happens on boot is in this video:
My Windows 7 has stopped booting after a restart, the system would just endlessly play the boot animation and not boot properly... system restore won't work, startup repair won't work, chdsk and sfc won't work. I have yet to try and see whether a Registry fix works. Windows loads the WRE VERY slowly.
View 1 Replies View RelatedI have an Asrock Extreme6 Z77 motherboard, and of course it comes with their signature Instant Boot.I have a Crucial m4 so booting wasn't an issue but I enabled it anyway to test it out. It didn't really do anything so I disabled and uninstalled it. However, now when I reboot there is no Windows loading screen, it just goes black after the Mobo splash screen and then shows the Windows login.This isn't a huge deal but I can't seem to figure out why this is happening. When the screen goes black, my USB keyboard and mouse go off too (the back-lights go off). I don't know if this has anything to do with anything but I thought I would mention it.Also, in msconfig the option for No Boot GUI is not checked.
View 3 Replies View RelatedEvery time I would boot up instead of the boot animation of windows 7. I get a loading bar instead how do I change this?
View 9 Replies View RelatedI have been getting problems when booting. Whenever I boot the windows startup animation stops until I press enter. Then it spots again for a couple minutes until I press enter. I tried clean boot and safe mode which did not help.
View 8 Replies View RelatedI am sure everyone recognizes this: at almost every startup, you see the boot animation. Windows 7 uses those 4 colors that merge into a Windows flag.
But the animation freezes at a random moment, then after 3 seconds it disappears and there we have the normal menu where you choose a profile to login with.
I want to see the animation completely, so making use of those 3 seconds where the OS is loading to continue the animation.
You have this in Windows XP too, where the loading bar freezes.
Are there any solutions for this? It would be fantastic to see the Windows flag at the end, and not just those 4 colors about-to-merge.
I don't know if this one can be done. I know how to turn off the ding sound it makes when my computer boots up but does anyone know how to change the boot screen animation? I would like to put one of my own animations on there instead of the windows logo popping up from 4 little lights.
View 3 Replies View RelatedThe problem is that when the bootscreen is showing, the animation plays just a bit and then it freezes, but windows boots ok. How do I fix the bootscreen animation?
View 5 Replies View RelatedI have just installed (and reinstalled) Windows 7 Pro (32 bit) on my system, and get no boot animation... the number 7 morphing from the Windows logo.Instead I get the text Starting Windows and a small red dot in the centre of the screen!Windows does boot correctly and there seem to be no related issues, so I am not overly worried, though it is certainly od
View 8 Replies View RelatedI have installed Win 7 RTM on several PCs and I like the new Win7 animation (the windows colors rotating then merging into the logo symbol). For some reason on my HP Mini 5101 this animation is replaced by the older Vista animation (the line of dashes moving left to right over "Microsoft Corp".. Is this "normal" or is there something I can do to change it to the Win 7 animation?
View 2 Replies View RelatedI seem to get all sorts of lines on any animation and the animation flickers.
View 2 Replies View RelatedMy old hard drive crashed, so I went ahead and bought a new one.I installed the new one, and popped in my Windows 7 CD. The first problem happened here. During the installation where I partition my drive, it told me no drivers were found and I had to insert a floppy disk with the drives on there for my hard drive.I didn't know what drivers I needed, nor had a floppy drive so I just transferred the hard drive to another computer in the house, and successfully installed Windows 7 on it from there.After transferring it back to my original computer, the computer boots up (takes a long time unless I request the boot sequence to boot directly from the HDD) to the Windows 7 starting animation, where the four colors come into the Windows logo, then restarts and repeats in the process.
I've searched online, and I'm not sure if it's a connection problem or not. I think the connection I had previous to this new hard drive is the same.The only difference is my old hard drive was SATA but it was connected with the 4 input power chord, but my new one is just connected by the SATA power connector (no option for the 4 input chord).I'm not sure what the problem is. I tried going into the BIOS to change SATA settings and boot order preferences, however I don't see the option. I'm sure I tried checking under every setting.
I have an MSI a6205 laptop, and have recently reformatted my computer to reset everything in it. My problem is this: Ever since I re-installed Windows 7 my computer has been starting up, getting to the little 'Starting Windows' animation, then the screen turns off completely, with no back light (the fans and LEDs still function perfectly). The way I have been getting it to work is by turning it on, waiting for the screen to turn off, then tapping the power button and putting it to sleep, after a few seconds I hit the power button again to awake it, and the screen turns on and functions perfectly.
I know this isn't a hardware issue, because I also have Ubuntu 12.04 installed on the machine, and it works perfectly. It's just Windows 7 that is giving me this problem.
How to change the menu animation in Windows 7 from slide to fade?
View 2 Replies View Relatedthe windows 7 welcome screen spinner isn't animating when I boot my computer or the shutdown spinner animation i have tried going into safe mode to see if that would fix it but no luck, I also tried sfc.exe.
PC specs
Operating System
Microsoft Windows 7 Home Premium 64-bit SP1
CPU
AMD FX-8120
Zambezi 32nm Technology
RAM
8.00 GB Dual-Channel DDR3 @ 799MHz (11-11-11-28)
[code]....
my system crashed yesterday due to gpu overheating. now it boots till windows animated logo but at the point right when welcome screen usually comes there is nothing now but a moveable mouse cursor on a completelly black background.now i have following stuff to get back to normal: two very old restore points and a recently created macrium reflect system image but no repair disc. i will be very happy, if there is a way to use the image since i know that some of you prefer macrium reflect insted of microsofts system image solution. unfurtuntelly my restauration points are way to old (april 2011).
View 7 Replies View RelatedI updated my computer last night with this update [KB2744842]. This morning I tried to open windows 7, but it gets stuck in the opening animation. I went into safe mode and try to do system restore, but all the restore points disappeared.... Finally, I tried "Advanced startup options" and chose Last Known Good Configuration (advanced). With this I was finally be able to boot into Windows 7 64-bit, but now my internet would not work either Ethernet or wifi.
I have tried:
netsh winsock rest catalog
netsh int ip reset reset.log
Nothing works...
I've assembled a new computer and everything is good, but when I put my Windows 7 Ultimate disk the Windows Loading is starting then the animation, but since then the screen is completely black. I waited at least half an hour. I tried to replace the disk drive and the IDE cable, but no change. I put the disk on another computer, and it works properly and displays the screen with the blue Windows 7 background where the installation begins (and asks for the installation language), instead of that black screen.
Processor: Intel E5200 2.6GHz Motherboard: Gygabyte G41M-ES2L Memory: G. Skill 2GB GPU is onboard
it is possible right?
View 5 Replies View RelatedWhen it came back I installed everything and whenever I start it up there is a 10 second delay before the startup animation starts. then it takes its normal course. When my bootup starts now it seems as if it has a much longer bootup than before I rmaed it and it is quite annoying seeing as I have to shut it down because it will not resume from hibernate or sleep.
View 3 Replies View Relatedmy mouse loading animation (the blue circle) keeps randomly appearing at 30 second intervals for no reason. Is there any way to stop this or disable the animation? Its rather annoying when im gaming and it randomly appears.
View 3 Replies View RelatedI have this laptop on loan and ca not play the gifs I created on WXP, there must be a simple solution,like open with windows picture and fax plyer but its not here?
View 5 Replies View Relatedhow to change the background of the logon screen however, I'd like to change the little blue ring animation. I'm familiar with resource hacker and restorator but haven't been able to find where this animation is stored to make the desired change.
View 5 Replies View RelatedI have the same symptoms as Orpheus2000 posted in November 2011. Unfortunately for me, that thread ended without any apparent resolution. I've tried everything suggested yet Spider Solitaire still won't show the animation. When I go to 'options' the 'show animation' option is checked but greyed out
View 1 Replies View Relatedthere's such an application able to load a sequence of static pictures and turn them to a video or animation, then able to make necessary transformations like resizing or changing color depth, and finally export eighter as video or animated .GIF.
I have tried several applications that I already have installed like Fireworks, Vegas or Corel VideoStudio but none of them seem to handle that job.
I have searched on this forum and Google to see if others are having the same issue. After updating Windows last week, my computer has been in a consistent state of decline. Today, I powered the CPU down and it will not start-up again. I have attempted to use the windows repair disc, but am now told that startup repair cannot fix my problem.
View 4 Replies View RelatedI been trying to boot from a cd and it won't let me I went into the boot order and it seems to not have the cd option there
View 3 Replies View RelatedBasically, my computer is relatively powerful, i built it for gaming and its worked perfectly ever since. My computer runs windows 7, it gets to the logon screen and i logon perfectly fine. Problem is that after 5 minutes of waiting it goes to the desktop and for a further 20 minutes it is unusable. To the point where if i try to click on stuff Windows displays "Windows 7 has stopped working" etc.
I notice that for this 20 minutes on the desktop my startup applications (Like Fences, Pidgin, MS Security Essentials, Dropbox) do not start. So far i have ensured that explorer.exe is running (which it is). And I have tried other stuff like running virus scans with MalwareBytes, MS Essentials and SuperAntiSpyware (Found nothing). Temperatures of my components are fine, Graphics card around 60-75 degrees, CPU Cores at around 40-55.
My computer is specced as below:
Quad Core 3Ghz CPU
8GB Ram
Nvidia 9800GTX
I have an old Dell Optiplex GX620 with Windows 7 Professional that I have been using as a media PC hooked up to my Panasonic flatscreen. I normally do not shut the computer down that often, instead putting it into sleep mode when not in use. Last night when I tried to wake it up it just showed a blank screen with a cursor. I manually shut it down and when it restarted it would not boot up and went into a loop of restarting. I put the installation disk in and let the Startup Repair program run overnight. When I tried to start the computer the next morning it booted up to the point where it shows the Starting Windows animation and then goes to a black screen with a cursor. I ran the Startup Repair program again but it reported that there were no problems. I restarted again and again it proceeded past the starting windows animation but no further. I am able to move the cursor but it will not proceed past this point. I have tried booting up in Safe Mode and get the exact same result, black screen with moveable cursor.
View 1 Replies View RelatedI had to do a "Windows repair" boot on a Windows 7 X-86 Windows 7 Pro machine. Now when I boot it up I get the boring "Vista" like blank screen with the Microsoft Bar instead of the nice "Windows 7 Windows starting " with the spinning Windows 7 cube.
View 5 Replies View Relatedrecently i have a problem with my laptop, when restarting it loads normally but after a second desktop load something i dont know caused the desktop unclickable and the loading animation circle is still spinning, after about 2-3 minute it finished and my laptop works well as usual again (no slow), i wonder what makes that happen, sometimes its very annoying when we want to use the laptop immediately after restarting or turning on
View 1 Replies View Related