System Hangs Even After Fresh Installation
Oct 27, 2008
I installed a clean win xp professional OS on a new rig (quad processor), no issues. Then I did a Acronis recovery from a uniprocessor pc, and installed the correct mobo drivers. Still no issues. The I did a restart and a repair install to load the mobo sata and AHCI drivers. The pc restarts, but everytime I open a program from windows, for example Windows Explorer, or Software from the configuration screen, or Network Connections, I get a window with "Windows Installer", waiting for something to load. The version of windows on my old pc is sp3, after the repair install (I used a win xp slipstreamed with sp2), I see sp2 on my info screen of computer properties.
View 14 Replies
ADVERTISEMENT
Jun 6, 2006
I wanted to do a fresh install of Xp pro on a hard drive i had laying around. I ran the disk. Deleted all the old stuff on hard drive. the disk seemed to run normally. Except when it stopped running during install. it did this about 5 times. I got the message..1. cannot copy the file... msvct.dll ( at 2%)2. cannot copy the file... mswsock.dll ( at 5% 3. cannot copy the file... msvcp60.dll ( at 8%04. cannot copy the file... msvfw32.dll (at 9% )5. cannot copy the file... msxml.dll ( at 9% )
View 7 Replies
View Related
Dec 4, 2003
Well, I just recently installed XP clean on a friends computer, and While doing so I had no speakers connected to the computer. Then after, I plugged them in and get no sound. In the device manager under the legacy audio cards and codecs, it says "This device is working properly", but through the control panel under sounds and audio devices, it says there are no audio devices detected.
View 14 Replies
View Related
Mar 2, 2010
Late lastnight I was attacked by a nasty virus that wouldn't give control of my computer back, every attempt at a "System Restore" was met by the virus blocking my attempt. I was able to do a "System Restore" via "Safe Mode" but strange things began to happen even after the restore point, so I saved as many family pictures as possible. Bottomline, is there a safe way to scan my thumb drive for virus so that I can add my family pictures to my new fresh install?
View 49 Replies
View Related
Jul 4, 2006
I started up the computer, watched the BIOS detect the RAM, hard drive, etc, and then was greeted by a blank screen instead of the Windows boot screen. It proceeded though, and after a few seconds flashed to another black screen, this time displaying the cursor. I'm guessing this is the logon screen, but nothing displays but the cursor. (Note that the video card and monitor are both fine...I tried swapping them out just in case.)
View 7 Replies
View Related
Jul 26, 2009
I get up this morning and turn it on, it seems to boot okay, but after the Windows XP logo and the little blue loading bar it hangs at a black screen until after about five straight minutes I get fed up and power down. I tried booting in safe mode and that worked fine a minute ago, but now I am trying safe mode again and it hangs at a file called Mup.sys and will not proceed with the boot.
View 2 Replies
View Related
Aug 4, 2007
I got that HP pavilion 503x that needs a fresh install of windows. it was running on xp home edition and i want to go with xp pro.my problem is that when i put in my xp pro cd (that i have used several times on other pcs) it reads it but doesnt boot it and goes directly to HP reinsatallation system for PC. I have like 8 cds for HP xp home installation. when i put in the disc 1, it reads it and boots it normally but the cds appears to be corrupted and at somee point the installation will crash. i havee tried copying the cd on a clean one but it doesnt see whats on it, it doesnt read it and keep ejecting the cd out. im confused, its the first time its happen, and i dont get it.
my winxp cd works perfectly fine on my other computer.its like the computer wont read anything but the HP cds.
View 3 Replies
View Related
Nov 5, 2007
I recently bought an xp home edition disc and did a fresh install on my computer because my old installation that came with my Packard Bell iMedia got completely messed up over time Anyway, I have now no drivers for anything. I downloaded the correct nvidia driver, which was easy to locate and which fixed numerous problems. However, windows doesnt ever know the logitech speakers are there.
View 14 Replies
View Related
Aug 5, 2005
When I did a fresh install of XP Pro, my add or remove programs list is blank. Nothing ever shows up on it. Is there a fix for this?
View 4 Replies
View Related
Mar 5, 2006
I'm running Windows XP and i have this OS 2000 PLATINUM EDITION boot up program that interferes with and stops my startup asking me to register when i don't really need this program can someone help me eliminate this program from my startup
View 10 Replies
View Related
Oct 10, 2006
I've been trying to update from xp sp1 to xp sp2.it hangs up during instal with an error that tells me thatc:WINDOWSAppPatchdrv.main.sdbis still running.Has anyone seen this before and if so how do I get past this error.Also, I am wondering how much do I really need this update or am I fine without it.I am told by Microsoft that my version of xp is now out of date.Should I be worried? Other than this everything is fine on this machine.
View 14 Replies
View Related
Jul 9, 2005
I'm trying to install xp home on my bros comp. he used to have win 2000 pro. I backed everything up and formatted the hard drive. (75 gig ntfs). This worked great. I pulled his hard drive out and put it in my comp (secondary) I then installed xp on it. This went fine, I was even able to boot all the way to xp. The problem comes in when I tried to move the hard drive back to his comp. I could not boot past the compaq screen. I got the error message
"couldn't open drive multi(0)disk(0)rdisk(0)partition(1)"
"ntldr: Couldn't open drive multi(0)disk(0)rdisk(0)partition(1)"
View 6 Replies
View Related
Sep 10, 2005
i have a Dell PowerEdge 800 it has to sata 37 gig hd on it when i install winxp pro on it says it cant find them i also raid 0 them
View 4 Replies
View Related
Jul 24, 2005
when you boot up, if there is a cd in the cd-rom drive, it seems to 'hang' during windows startup for about 30-60 seconds. During that time it doesn't seem to be accessing the drive. After the 30-60 second delay, it boots up fine. Point me in the direction I need to go.
View 3 Replies
View Related
Apr 30, 2006
A new 250 gig seagate SATA 7200.8 hard drive and a win xp home upgrade edition. enabled SATA in BIOS, connected SATA cable to SATA1 on mobo, BIOS didn't recognize the drive, connected to SATA2 and BIOS did recognize drive so I tried to partition and format using Seagate's DiscWizard from floppy. Things seemed to go fine until I got a message that format wasn't completed because of some error.I went ahead and tried to install from xp cd, loaded SATA drivers from floppy, cd started loading but then hangs up at "setup is starting windows"I've never used SATA before.
View 7 Replies
View Related
Sep 20, 2005
Windows update shield informs me I need to install Office XP SP3. I click on it, but the installation hangs up halfway through asking me to insert the Office XP CD - which I don't have.
Went to Microsoft download page and clicked on full file version (SINCE I don't have the CD), but still get the request to insert the CD halfway through the installation. Since I can't complete the download, the update icon pops up every time I log on. Any suggestions?
View 2 Replies
View Related
Aug 5, 2009
I just corrected my problem by reinstalling the operating system from a CD for windows XP... The problem now is there is NO audio device, I cannot download some of programs from the CD's--it can't find the installation program.I have no sound and cannot donwload some of the programs that came with this computer.
View 9 Replies
View Related
Aug 6, 2007
Ive been using WindowBlinds but when i booted this morning it wont start with windows and my theme changed to windows classic. i thought it was a problem with WindowBlinds but the problem still remained after a fresh reinstall. Even a system restore wont fix it. I have Tune-Up Utilities but Tune-up styler that cannot apply themes as well!started when i installed CounterSpy last night.
View 10 Replies
View Related
Dec 23, 2007
at first my PC was making funny effects. The screen goes blank and no screen comes out after XP finishes booting up. Frequent reboots were needed to get into XP. Didn't care at this stage as i was able to still do my work.
After few weeks, the PC goes mad with BAD POOLER CALL errors and restarts and i could not get my way into XP same goes for Safe Mode. So i decided to repair my XP...
It all goes fine, when installation goes halfway at "Copying files..." screen goes black, DVDROM goes disco in the LEDs and the PC restarts by itself. This happens endlessly.
View 1 Replies
View Related
Sep 18, 2009
had virus on system, I tried running as many anti-virus, malware, spyware, trojan programs in Safe Mode to no avail. I came to the conclusion that I should do a fresh XP install (SP2). Everything was fine after re-formatting and installing until I got to the "Installing Network" segment with "32 minutes approx remaining". The first time I waited well over 40 minutes and nothing happened. I restarted and started over with a re-format and the same thing happened.
I've tried everything I can think of:disconnecting the ethernet, removing all my expansion cards, making sure all of the on-board devices were enabled in the BIOS.
View 9 Replies
View Related
Sep 17, 2007
I'm currently using Acer Travelmate 650. I need to reinstall the windows as i'm passing my notebook to my friend. how i reinstall my windows as i don't have a cd-rom for install.
View 35 Replies
View Related
Dec 9, 2004
my housemates computer has me completely stumped, we have formatted his HDD several times and re-installed XP on it several times, yet every second time the computer will freeze just after its started up, not freeze really but will lose the mouse and keyboard
View 2 Replies
View Related
May 17, 2008
i bought new XP Home edition Cd and i installed it and in the halfway through it failed to identified some few files like chkr.dll , rvse.dll, bckg.dll i found tht all those files are related to Games (Heart,pinball,freecell )so i thought to reinstall the Window Xp but when i bought the cd..the retailer told that i can only use the license key for 3 times since its genuine and another thing is that i found in websites that "OEM license only allows the copy to be activated and used on the one, single, specific set of hardware it was sold for. It can be reinstalled and reactivated as often as you like
View 14 Replies
View Related
Apr 13, 2007
Does anyone know if there is a way to recover files after a fresh install of the operating system? I suffered a bad virus that disrupted my registry to the point where the computer was unusable. The only solution was a fresh re-install of XP.
View 9 Replies
View Related
Mar 13, 2007
I bought a new desktop, 3 yrs ago, with Windows XP Pro installed from the factory, and of course it was an OEM version, as usual.The com has a MSI Intel 848P Neo Mother board which I have changed 2 times before on warranty. Now I had to change it again, due to one PCI slot was dead. So far everything was ok.But, to activate the OS was now a "plenty big" problem.
Somehow the technician managed to do it at his own place. Suddenly, I was going to download a plug-in program to my Microsoft Publisher 2002, of course validation was required. No problem - I had done that several times during the last 3 yeras and everything has been ok. But not this time. Validation failed, Microsoft announced. "The Office XP Pro has to be activated, start any Office program, go to Help activate product" - No problem, easy job.
View 9 Replies
View Related
Jul 26, 2009
I have been trying to clen up an old computer to give away. It is a 2002-vintage desktop with 512MB ram. I tried several times to reformat and reinstall xp, but I have only succeeded in removing the operating system and reformating both the hard drives. I have the OEM xp disk that came with it but I have tried 15 times to install xp and I can't. Is there anything I can do to fix this?
View 11 Replies
View Related
Mar 20, 2006
ive been trying to reinstall windows on my pc, it will do everything fine until it starts to instal, it will get to about 50% threw the devices then it wont do annything after that, ive tryed everything i can think of to undo the installation but cant get it to work, is there something if missed for it to install correctly? if not can you tell me how to undo the new installation as its useless at the moment
View 14 Replies
View Related
Dec 27, 2008
I recently had my XPS M1710(Windows XP Pro) swapped out for a M1730(VHP) and would like some assistance in getting rid of Vista and installing XP Pro onto the new system.
View 12 Replies
View Related
Mar 25, 2005
What would be the procedure for me to change from Windows XP to Windows 2000? Does XP have to be uninstalled or can I install 2000 without that requirement? Someone told me that I could just install 2000 and, that, in effect, would override XP. But, I don't want to goof something up so I thought I had better check with the experts here first.
View 13 Replies
View Related
Aug 27, 2005
I need to install Windows XP on a laptop (Dell Latitude CPx H500GT) but I don't have the CD modular drive for it.How do I install XP with no built-in CD-ROM drive? The only other options I have is a ethernet PC card, one USB port and I do have a USB enclosure (for use with 3.5 hard drives or 5.25 cd/dvd drives)
View 8 Replies
View Related
Dec 28, 2008
I've had triple boot on my PC, 1st partition Windows Vista, 2nd partition Windows XP and on the other 3 partitions Debian Ubuntu (extended partition). I'm using Grub as my boot loader, everything was working fine, booting all 3 OSs was no problem. About 3 months ago my Vista OS stoped working (because I did some bad things with it) ... actually it isn't that important how I did that, because XP kept working (and Linux, of course, too). Like 2 weeks ago I decided to remove Vista, so I removed it using gParted by simply formating the 1st partition to an empty partition.Now my XP stoped working I thought it was because the boot.ini was placed on Vista's partition. So I used my XP installation CD to do fixboot etc, even fixmbr and I ran a chkdsk over the XP partition.
View 12 Replies
View Related
