when you boot up, if there is a cd in the cd-rom drive, it seems to 'hang' during windows startup for about 30-60 seconds. During that time it doesn't seem to be accessing the drive. After the 30-60 second delay, it boots up fine. Point me in the direction I need to go.
I started up the computer, watched the BIOS detect the RAM, hard drive, etc, and then was greeted by a blank screen instead of the Windows boot screen. It proceeded though, and after a few seconds flashed to another black screen, this time displaying the cursor. I'm guessing this is the logon screen, but nothing displays but the cursor. (Note that the video card and monitor are both fine...I tried swapping them out just in case.)
View 7 Replies View RelatedI've been trying to update from xp sp1 to xp sp2.it hangs up during instal with an error that tells me thatc:WINDOWSAppPatchdrv.main.sdbis still running.Has anyone seen this before and if so how do I get past this error.Also, I am wondering how much do I really need this update or am I fine without it.I am told by Microsoft that my version of xp is now out of date.Should I be worried? Other than this everything is fine on this machine.
View 14 Replies View Relatedi have a Dell PowerEdge 800 it has to sata 37 gig hd on it when i install winxp pro on it says it cant find them i also raid 0 them
View 4 Replies View RelatedA new 250 gig seagate SATA 7200.8 hard drive and a win xp home upgrade edition. enabled SATA in BIOS, connected SATA cable to SATA1 on mobo, BIOS didn't recognize the drive, connected to SATA2 and BIOS did recognize drive so I tried to partition and format using Seagate's DiscWizard from floppy. Things seemed to go fine until I got a message that format wasn't completed because of some error.I went ahead and tried to install from xp cd, loaded SATA drivers from floppy, cd started loading but then hangs up at "setup is starting windows"I've never used SATA before.
View 7 Replies View RelatedI installed a clean win xp professional OS on a new rig (quad processor), no issues. Then I did a Acronis recovery from a uniprocessor pc, and installed the correct mobo drivers. Still no issues. The I did a restart and a repair install to load the mobo sata and AHCI drivers. The pc restarts, but everytime I open a program from windows, for example Windows Explorer, or Software from the configuration screen, or Network Connections, I get a window with "Windows Installer", waiting for something to load. The version of windows on my old pc is sp3, after the repair install (I used a win xp slipstreamed with sp2), I see sp2 on my info screen of computer properties.
View 14 Replies View RelatedWindows update shield informs me I need to install Office XP SP3. I click on it, but the installation hangs up halfway through asking me to insert the Office XP CD - which I don't have.
Went to Microsoft download page and clicked on full file version (SINCE I don't have the CD), but still get the request to insert the CD halfway through the installation. Since I can't complete the download, the update icon pops up every time I log on. Any suggestions?
First of all, hello everyone! I'm happy to have joined your community. I feel sort of bad for joining only to ask a question, but the boards just seemed so helpful I couldn't resist. Anyway, I recently installed the .net framework to a stable build of windows XP SP2, and now I'm having some problems. I deleted the asp.net account and checked the "don't use welcome screen" box in user profiles because I don't really like the login etc... that comes with it.
That was two days ago. This morning I turn on my computer only to have it take a long time at the windows loading screen, and hang at the off-blue loging screen without bringing up the login box. Now, I wanted to somehow get rid of the .net framework after I realised I didn't really need it, but now it's not even possible. I tried both entering in safe mode (hanging black screen with "safe mode" in the usual places) and using the last known working setting (and got the same off-blue login screen.) I don't mind reverting to a saved state, but I can't even access the desktop to be able to.
I am running Windows XP Home Edition, Service Pack 1. When I go to Windows Update, the page just hangs.
My ADSL Internet Connection is really slow.
I have also run Spybot Search and Destroy.
For some reason for a couple of weeks now my computer hangs all of a sudden no matter what I'm doing. Sometimes I am watching a movie, sometimes playing a game, and sometimes, I just leave it open coz a download is running, I come back and check 10 minutes later, the computer has hanged. I have noticed that when this happens, the hard-disk light comes permanently on.
Ran AVG and found few viruses, removed those, no avail. Ran malware/spyware remover, found few, removed those, no avail. Formatted C drive, reinstalled windows, PC ran well for 10 days, problem came back. Initially had 512 MB RAM, changed it to 1GB, formatted PC again, PC ran well for 10 days, problem back again. Can't run checkdisks and all because the comp hangs every single time.
This morning it tells me it has recovered from a serious error, but after about 5 minutes of seemingly normal usage, it briefly flashed some kind of blue screen error (no way in hell I could read it)Now it is constantly asking for a chkdsk, I let it run and all appears OK... but when I get to the login screen the display starts to look weird like there are lines running through it, and it promptly flashes the same blue screeen and starts all over again.
I have been able to briefly get into safe mode, tried a system restore but when I went to reboot the processes started all over again. PLEASE NOTE that getting into safe mode takes some patience.... it hangs FOREVER when loading the agpCPQ.sys driver, and sometimes just goes ahead and reboots on it's own.. TWICE so far today I have managed to get into safe mode, but only for a few minutes before it reboots and starts over.
I have just installed Windows XP SP3 in my computer. Everything is normal except when i browse a folder that has image files (at least .jpg). It makes thw windows explorer hangs (stop responding) and i have to end it then restart it with task manager.
View 6 Replies View Related
at first my PC was making funny effects. The screen goes blank and no screen comes out after XP finishes booting up. Frequent reboots were needed to get into XP. Didn't care at this stage as i was able to still do my work.
After few weeks, the PC goes mad with BAD POOLER CALL errors and restarts and i could not get my way into XP same goes for Safe Mode. So i decided to repair my XP...
It all goes fine, when installation goes halfway at "Copying files..." screen goes black, DVDROM goes disco in the LEDs and the PC restarts by itself. This happens endlessly.
had virus on system, I tried running as many anti-virus, malware, spyware, trojan programs in Safe Mode to no avail. I came to the conclusion that I should do a fresh XP install (SP2). Everything was fine after re-formatting and installing until I got to the "Installing Network" segment with "32 minutes approx remaining". The first time I waited well over 40 minutes and nothing happened. I restarted and started over with a re-format and the same thing happened.
I've tried everything I can think of:disconnecting the ethernet, removing all my expansion cards, making sure all of the on-board devices were enabled in the BIOS.
I need some help. I'm running windows xp pro w/SP2. Everytime I select search to look for files/folders it hangs. It doesn't work. Is there a fix for this?
View 3 Replies View Related1:C:\windows which windows Installation would you like to log on to
View 1 Replies View RelatedI started having issues with IE8 although I do use Firefox for browsing, but still have to do my Windows updates and such. Then I ran a utility download to clean up PC and registry and lost the ability to do updates, and can't install Windows products, and my disk drives have driver issues. No, I did not backup or do restore point and I have tried my restore points to no avail.
View 1 Replies View RelatedI have reinstalled windows for the 3th or 4th time and I am in the process of reinstalling all my programs, I have a few questions:
1) can I erase the directories the programs previously installed in the old version of windows?
As you can see in the attachments, I have installed my windows under the partition D: , so can I just go and erase all the folders of the utilities of my previously installed windows in C: ?
2) just out of curiosity, I tried to run some utilities previously installed and some of them work, other dont work. what does this mean?
3) at the system startup, how can I erase the choice between the 4 windows? I just want to leave this present working version.
4) I noticed a general slowing down of the memory when I run an application, can it be because of this new installation? how can I improve this problem?
i am living in costa rica and just recently purchased what i believe to be a refurbished hp nc6000. in downloading some items from microsoft, i confirmed that i have authentic xp professional installed. however, the previous owner could not provide me with the original cd, hense my dilema. in deleting some previously loaded software, i believe i inadvertantly deleted some shared files for other programs. is there anyway without the original disk to repair the installation or operating system. i have read about hidden partitions and the like, but am not confident enough to try this. i have the serial numbers and whatnot for my xp professional software, so i am not sure if having that info allows me to do anything without the actual cd. one of the problems is i have downloaded internet explorer 7 but it fails to completely install. i have gotten the most recent service packs and updates from microsoft but still no progress. i would go out to the local best buy and get the appropriate software new if i wasnt living in the middle of a third world country. there are computer repair shops close to me, but everyone has spanish operating systems and mine is xp in english and i cant afford to chance losing it. is there any way to recreate the software or operating system back to its original format with all original folders and files intact?
View 1 Replies View RelatedI formatted a computer with NTFS (not quick) which reached 100% which had a hal.dll error on it when trying to boot. All seemed well and it let me install a new copy of XP on it.The only thing is now when the computer is turned on it asks which install of windows I want to boot from but I already formatted it so can't understand why the old one is showing up at all - the computer is running fine now as long as when it's booting I don't pick the original install of XP which has the hal.dll error on it.
View 9 Replies View RelatedI have a old pc, after formatting and installing windows on it successfully, only to restart half way and freezes up. someone help me out, about what to do, every help will be highly appreciated. thxsUpdate: Just tried to put winxp disc in and start a reformat but again nothing happens and it just goes back to the same screen mentioned above.
View 1 Replies View RelatedMy friend recently gave me his computer after buying a new one. It's actually pretty decent by totally crippled by viruses and stuff. When he gave it to me, he had Ubuntu and XP installed on it. The XP would no longer start (blue screen) and I couldn't use Ubuntu for what I wanted to do. I reinstalled windows, however I didn't know which partition was Ubuntu and which was the broken Windows. It didn't really matter to me at the time, so I just picked one and overwrote it.Now, I've realized that I made the wrong choice. It claims I have two hard drives in my now working version of Windows: C: and D:. D: is the one I'm acutally using, but it's only 20 GB large while the C: with the bad version of Windows is 150 GB. I don't need any information off of C:, so is there some way I can just delete it and add the extra hard drive space to the partition I actually use?
View 10 Replies View RelatedI'm running windows xp pro...i'm trying to install an ethernet card and a box comes up asking for the windows cdrom to look for drivers it needs...problem is i don't have my copy of windows xp...is there a place on the computer that i can browse to find what it's looking for...i guess i'm asking if when windows xp pro is installed does it copy everything to the computer in a file somewhere. otherwise i don't know if it would be better just to buy another ethernet card or if i would have the same problem. i do have the floppy that came with the ethernet card but it says the file i need is not on the floppy...?
View 13 Replies View RelatedI have Windows XP in my system and the problem is that after installation of Windows within 24 hours corrupt...how it comes... during working suddenly system restart and afterthat windows unable to boot again...Few days before I found virus in my system FUNNY UST SCANDAL.AVI.EXE so I clean my drives with Antivirus and virus deleted ..may be this because of Virus so I scan my PC with Antivir ...and with Mcafee too but now nothing I found..
View 2 Replies View RelatedI was overclocking my cpu cause i replaced the stock fan with a cooling system and while i was overclocking i got a blue screen. So, i rebooted my comp and it says a file is missing or corrupt ( forgot what file something windows/system/config) and told me to repair it. and it wont let me use my windows xp disc. I set my cd-rom to 1st priority, im posititve my cd drives work, and the cd has only been used twice so im pretty sure it cant be that.
View 1 Replies View RelatedI have started to rebuild my desktop as it has become slow. I purchased the PC with windows XP professional and have the sticker in on the box with the license key. However, I used a Windows Genuine Advantage Kit for Windows XP professional disk to rebuild. When it asked me for the Product Key I entered the code on the chassis but it says this is not valid. I received an email with the Product Key for WGA disk but I do not have the email anymore with the yellow product key although the WGA box does have the Certificate of Authentication on it.c, how do I get another copy of the email with the Product key or get to a point where the product key.
Thanks
I want to know how to repair windows installation without losing ANY files.
View 5 Replies View RelatedI have been having trouble with a potential virus ever since I visited a google link where instead of a page loading IE crashed. Spybots teatime gave me a bunch of popups about changed entries which I was forced to accept. Since then I've had adspyware reappear over and over. Ad-aware detected it and removed it, but clearly not the underlying problem. System been running slow. I was in a game where I shut down a bunch of background programs including avg antivirus,teatime & zonealarm to free up resources. When I shut down teatime it gave me a bunch of messages about blocked changes. These set of popups had to be forceably closed. Then my system was running at a crawl. So I exited the game and restarted my PC. Now after the XP loading screen I get a black screen with no hdd light/activity. No save mode variation works either.(or previous working configeration etc) Fortunately I had win98 duel booted for older games. If a virus has caused this problem, its undetectable by many a antivirus program. Maybe some rootkit thing? What do I do? Hijackthis only checks the OS it runs under and I can only run win98. BTW, can't reinstall XP because I lost the CD. Assuming what ever rootkit virus wouldnt still be there to prevent loading anyways.
View 10 Replies View RelatedFor several weeks now I haven't been able to download/update Windows updates. I have been working with Microsoft Tech Support (via the telephone)for several days now and we haven't been able to correct the problem(s). My question is... can I use the Windows Installation disk to "fix" any problems my machine is having with the downloads/updates? Is there a "fix" option on the Windows disk and am I at risk in using it? I don't want to lose anything on my desktop because it is the way I want it at this time.
View 1 Replies View RelatedI have an external hard drive (150GB) which is partitioned into two parts. One partition , about 145gb, is data and files of my own. Then there is an extended partition at 5gb in size, which contains windows xp installation files. What I did was take my windows xp cd, make an ISO, and then extracted the iso and put the files into the extended partition of my external usb hard drive.The computer I want to install to has a cd drive that is not working and thus i cannot install windows xp from a cd. The BIOS of the computer DOES support booting from a USB device.I have partition magic software and have used it to create the 5gb extended partition on the usb external drive. However, I don't know how to configure anything so that it will acutally know to boot from this partition and what files to use to start the installation.
View 3 Replies View RelatedI have successfully created a USB installation routine for Windows XP using Multiboot.cmd. The problem i am having is that the installation works perfectly on evry machine i have tried it on apart from Dell machines.
It gets as far as Setup is Starting Windows (after loading in all the background drivers) and then Blue Screens with error 0x0000007b. I have scoured the internet and found nothing of any use on this error code.
It does state that when installing from USB to ensure that no other USB devices are plugged in but the mouse and keyboard themselves are USB devices.