Installation Hangs On "Installing Network"?
Sep 18, 2009
had virus on system, I tried running as many anti-virus, malware, spyware, trojan programs in Safe Mode to no avail. I came to the conclusion that I should do a fresh XP install (SP2). Everything was fine after re-formatting and installing until I got to the "Installing Network" segment with "32 minutes approx remaining". The first time I waited well over 40 minutes and nothing happened. I restarted and started over with a re-format and the same thing happened.
I've tried everything I can think of:disconnecting the ethernet, removing all my expansion cards, making sure all of the on-board devices were enabled in the BIOS.
View 9 Replies
ADVERTISEMENT
Jul 4, 2006
I started up the computer, watched the BIOS detect the RAM, hard drive, etc, and then was greeted by a blank screen instead of the Windows boot screen. It proceeded though, and after a few seconds flashed to another black screen, this time displaying the cursor. I'm guessing this is the logon screen, but nothing displays but the cursor. (Note that the video card and monitor are both fine...I tried swapping them out just in case.)
View 7 Replies
View Related
Oct 10, 2006
I've been trying to update from xp sp1 to xp sp2.it hangs up during instal with an error that tells me thatc:WINDOWSAppPatchdrv.main.sdbis still running.Has anyone seen this before and if so how do I get past this error.Also, I am wondering how much do I really need this update or am I fine without it.I am told by Microsoft that my version of xp is now out of date.Should I be worried? Other than this everything is fine on this machine.
View 14 Replies
View Related
Sep 10, 2005
i have a Dell PowerEdge 800 it has to sata 37 gig hd on it when i install winxp pro on it says it cant find them i also raid 0 them
View 4 Replies
View Related
Jul 24, 2005
when you boot up, if there is a cd in the cd-rom drive, it seems to 'hang' during windows startup for about 30-60 seconds. During that time it doesn't seem to be accessing the drive. After the 30-60 second delay, it boots up fine. Point me in the direction I need to go.
View 3 Replies
View Related
Apr 30, 2006
A new 250 gig seagate SATA 7200.8 hard drive and a win xp home upgrade edition. enabled SATA in BIOS, connected SATA cable to SATA1 on mobo, BIOS didn't recognize the drive, connected to SATA2 and BIOS did recognize drive so I tried to partition and format using Seagate's DiscWizard from floppy. Things seemed to go fine until I got a message that format wasn't completed because of some error.I went ahead and tried to install from xp cd, loaded SATA drivers from floppy, cd started loading but then hangs up at "setup is starting windows"I've never used SATA before.
View 7 Replies
View Related
Oct 27, 2008
I installed a clean win xp professional OS on a new rig (quad processor), no issues. Then I did a Acronis recovery from a uniprocessor pc, and installed the correct mobo drivers. Still no issues. The I did a restart and a repair install to load the mobo sata and AHCI drivers. The pc restarts, but everytime I open a program from windows, for example Windows Explorer, or Software from the configuration screen, or Network Connections, I get a window with "Windows Installer", waiting for something to load. The version of windows on my old pc is sp3, after the repair install (I used a win xp slipstreamed with sp2), I see sp2 on my info screen of computer properties.
View 14 Replies
View Related
Dec 28, 2005
have a new installation of WinXP SP1. When i try to browse any folder, the explorer either hangs for a long time or crashes occasionally. This happens when my machine is connected to network. If my machine is off the network, it shows the folder contents immediately. I removed all the network shares connected to my machine and still the problem persists.
View 6 Replies
View Related
Jul 14, 2005
First of all, hello everyone! I'm happy to have joined your community. I feel sort of bad for joining only to ask a question, but the boards just seemed so helpful I couldn't resist. Anyway, I recently installed the .net framework to a stable build of windows XP SP2, and now I'm having some problems. I deleted the asp.net account and checked the "don't use welcome screen" box in user profiles because I don't really like the login etc... that comes with it.
That was two days ago. This morning I turn on my computer only to have it take a long time at the windows loading screen, and hang at the off-blue loging screen without bringing up the login box. Now, I wanted to somehow get rid of the .net framework after I realised I didn't really need it, but now it's not even possible. I tried both entering in safe mode (hanging black screen with "safe mode" in the usual places) and using the last known working setting (and got the same off-blue login screen.) I don't mind reverting to a saved state, but I can't even access the desktop to be able to.
View 7 Replies
View Related
Apr 7, 2007
mi pc hangs always in 3x% percent i removes all devices and try again ..low format to my hdchange ramchange hd update biosreset cmoscheck temp nothing worksalways crash
View 14 Replies
View Related
Sep 14, 2006
Ok this morning i downloaded the new itunes 7 an when I went to use it the songs were all distorted an it locks up my system. So if youre thinking of downloading it I wouldn't do it. an does anyone know where I can get a link to the itunes 6.
View 12 Replies
View Related
Sep 20, 2005
Windows update shield informs me I need to install Office XP SP3. I click on it, but the installation hangs up halfway through asking me to insert the Office XP CD - which I don't have.
Went to Microsoft download page and clicked on full file version (SINCE I don't have the CD), but still get the request to insert the CD halfway through the installation. Since I can't complete the download, the update icon pops up every time I log on. Any suggestions?
View 2 Replies
View Related
Apr 29, 2010
Windows XP. I already have a current anti virus - the ESET NOD32 Antivirus. My room mate who isnt familiar with sanity (Hehehe), installed Kaspersky. When she restarted, it hangs. You can only move your mouse cursor and that's it. When you try to click the Start Menu the mouse icon changes to processing (the hour glass icon) and forever remains like that. Nor can I display the Task Manager - mouse cursor still displays the everlasting hour glass icon.
When I got home and tried to boot the pc (it is a desktop computer by the way. not a laptop), it still hangs like crazy. So, I reboot, went to SAFE MODE and did the SYSTEM RESTORE, date before the Kaspersky installation. And it didnt work (obviously since I am here in this forum posting my problem). Computer still hangs like crazy and this time, it doesnt show any desktop icon. I didn't get mad with my roomate since I see no point of it. :P So, I just want this resolve. My last resort will be to reformat my Windows Drive C: but I am not ready to say farewell to some of my softwares that I have no soft copy.
View 11 Replies
View Related
Mar 29, 2009
I used Windows Setup Manager to setup an unattended installation of WinXP and place distribution folder on drive C.
View 1 Replies
View Related
Apr 10, 2006
I have a wireless home network: 3 XP Home machines with file and printer sharing. A long time ago I bought a x64 license through my school for somewhere around $7. I have an Athlon 64 3700+ machine I'd like to try it on, and in a nutshell I was wondering if, post-installation, it will still be able to communicate with the other two 32-bit XP machines on my network.
View 1 Replies
View Related
Jul 12, 2005
I've a computer with Windows XP Pro, which is not connected to the internet. Now, I want to update it in order to be all up-to-date and secured again. So I don't mean by just downloading SP2, but by installing all security patches available ever since!
So I need to download everything first, burn it on CD, and then install the patches on my other computer. No problem. But the problem is: where can I download all those updates?! I've searched all over the net, and all I found was softwarepatch.com; it only contains english updates, and since I've a Dutch version of XP installed, those won't work. Simply changing the urls from xxx-ENU.exe to xxx-NLD.exe doesn't work either, different languages of the same patch seem to be hosted under a whole other url.
View 5 Replies
View Related
Oct 10, 2006
In my Network Connections it shows nothing. It is just white space. In my system tray, at the bottom right-hand corner of my screen, it shows no flashing computers. This has been so for around five months, I'm guessing. It never really bothered me until lately, and here is what I have done in order to fix it (to no avail, obviously):- Installed all critical Windows updates
- Ran Ad-Aware entire system scan (it's my only anti-virus program)- Tried to make a new network connection, but according to Windows, I have no network hardware, either- Put my Windows installation CD into my CD drive, went to "Install Optional Windows Components," and installed everything network related, then restarted.
View 14 Replies
View Related
Sep 21, 2008
How to installing xp from the network without network card? is there a way?
View 13 Replies
View Related
Jul 21, 2005
I tried to install USB Wireless network adapter to my XP system(OFFICECONNECT WIRELESS 11g USB ADAPTER). Not only that I couldn't establish a connection through that new wireless adapter I also lost my regular PCI network adapter couldn't connect via the PCI adaptor and couldn't set it's TCP/IP configurations I uninstalled the TCP/IP and when I tried to reinstall I got: "The name is already in use as a service name or service display name".
View 2 Replies
View Related
Sep 12, 2009
I just installed XP pro Sp2 over Vista Home Premium on my laptop. Please note that I originally had XP and upgraded to VISTA (big mistake) a year ago. The installation process went well, however I can't connect to Internet. My network connection shows that I have a connection. I tried to do ipconfig from command menu and did nor get any IP address.
View 14 Replies
View Related
Jul 15, 2005
Im trying to install a LinkSys network card, and it doesn't work after I do. When I try to reinstall in device manager, the error I get is "name is already in use as either a device name or service name"I've tried all the obvious... uninstall, reinstall stuff. I know I have to play with the registry to fix this but I dont know where to start. Can anyone help me, because as of now, my mother's computer doesn't get the internet!
View 5 Replies
View Related
Jun 30, 2009
I had to install a new hard drive on my laptop. It has windows xp. That installed ok and now I can't get my wireless to work. It says "No active network adapters". It is not plugged into the ethernet, my home computer is. I usually just get on my laptop in another room with the wireless that is built into the computer.
View 1 Replies
View Related
Aug 30, 2005
I am installing a new network with all XP pro Sp2 PCs's. The issue is these PC's were all built prior to me setting up the network and no one installed the administrator accounts on any of them. The server box in Advanced server 2003 and I set up there accounts in active directory. Made the part of the server workgroup. Set up there share folders gave them permissions to the shares and I could not copy there files to the server. I get the message no rights or permissions contact the Administrator. I copied some test files to an
USB memory stick downloaded the to the server for testing purposes. We can see them from the desktop but we can't edit or save them. In the folder that the files were in I made sure that they were'nt read only and it still say's we don't have permissions to these files?
View 5 Replies
View Related
Sep 29, 2007
I am having a problem with my printer after installing network magic. Everytime I send a document from the main pc to the printer connected directly to it, I get a stop screen and a reboot. When it comes back I do the Microsoft error report and it says there is a problem with a driver.
View 2 Replies
View Related
Jul 18, 2005
I keep trying to install Windows XP (tried both professional & home edition) and when it starts checking my system, it gives me the following error (the error comes when it is checking (which is the 4rth messsage on bottom of window), "Setup is loading files (Kernel DLL)".I then get the error message "File setupdd.sys could not be loaded. The error code is 4. Setup cannot continue. Press any key to exit"I have searched high and low to find Error Code 4 in microsoft's web page and have found nothing.
View 3 Replies
View Related
Oct 24, 2006
I am installing Windows XP Home on a computer. I just reformatted the hard drive using the Win XP CD.Now, when it goes to install, I get an error message that says Error:
SXS.DLL: Syntax error in manifest or policy file "D:I386asms6000MSFTVCRTLVCRTL.MAN on line 16.Error: Installation Failed: D:I386asms. Error Message: Data error (cyclic redundancy check).Fatal Error:One of the components that Windows needs to continue setup could not be installed.If you are installing from a CD, there might be a problem with the disc; try cleaning the disc or using another disc.
View 3 Replies
View Related
Dec 5, 2009
Is there any method to install other essential drivers like motherboard, graphic card, sound card drivers during the setup rather than installing them individually after completing the setup?
View 5 Replies
View Related
Dec 20, 2005
What factors slow down the installation? because im doing a reformat and my computer is going waaaay slower than normal to even load setup for xp
View 11 Replies
View Related
Sep 9, 2006
My friend's computer monitor loses signal about 75% through the "Installing Devices" phase of the Windows XP Professional installation. Article 311839 in Microsoft's support site has a solution, but it didn't really work at all.
View 2 Replies
View Related
Aug 12, 2005
I need to install thai font onto pc manually, but have damaged xp disc that came with pc. Have already download and saved required font file on pc harddrive. Now require instrution on how to instal file
View 2 Replies
View Related
Aug 24, 2006
i got this very old and cheap brandless webcam, it came with a mini-cdr which holds the drivers, when i place the mini-cdr into my dvd drive, it made a load noise, then the installer runs and i got the error shown in the top of the pic, as i continue the installation i got another error, shown at the botton of the pic, now i know maybe the disc is corroupt or something, so i decided to use device manager to install the drivers manually.
when windows did found the driver on the disc, it turns out to be a notepad file, which was strange, but i continue to install anyway, but windows pops up a message saying the driver isn't signed or could be harmful or something like that, i cancel the installation and uplugs the camera. i thought it made sense since the mini-cdr could actually be a coaster or a badly burnt disc, as the installer states there's an error, but should i try anyways?
View 8 Replies
View Related
