Fresh Install - System Freezing Just After Start Up
Dec 9, 2004
my housemates computer has me completely stumped, we have formatted his HDD several times and re-installed XP on it several times, yet every second time the computer will freeze just after its started up, not freeze really but will lose the mouse and keyboard
I just corrected my problem by reinstalling the operating system from a CD for windows XP... The problem now is there is NO audio device, I cannot download some of programs from the CD's--it can't find the installation program.I have no sound and cannot donwload some of the programs that came with this computer.
i bought new XP Home edition Cd and i installed it and in the halfway through it failed to identified some few files like chkr.dll , rvse.dll, bckg.dll i found tht all those files are related to Games (Heart,pinball,freecell )so i thought to reinstall the Window Xp but when i bought the cd..the retailer told that i can only use the license key for 3 times since its genuine and another thing is that i found in websites that "OEM license only allows the copy to be activated and used on the one, single, specific set of hardware it was sold for. It can be reinstalled and reactivated as often as you like
Does anyone know if there is a way to recover files after a fresh install of the operating system? I suffered a bad virus that disrupted my registry to the point where the computer was unusable. The only solution was a fresh re-install of XP.
I bought a new desktop, 3 yrs ago, with Windows XP Pro installed from the factory, and of course it was an OEM version, as usual.The com has a MSI Intel 848P Neo Mother board which I have changed 2 times before on warranty. Now I had to change it again, due to one PCI slot was dead. So far everything was ok.But, to activate the OS was now a "plenty big" problem.
Somehow the technician managed to do it at his own place. Suddenly, I was going to download a plug-in program to my Microsoft Publisher 2002, of course validation was required. No problem - I had done that several times during the last 3 yeras and everything has been ok. But not this time. Validation failed, Microsoft announced. "The Office XP Pro has to be activated, start any Office program, go to Help activate product" - No problem, easy job.
I have been trying to clen up an old computer to give away. It is a 2002-vintage desktop with 512MB ram. I tried several times to reformat and reinstall xp, but I have only succeeded in removing the operating system and reformating both the hard drives. I have the OEM xp disk that came with it but I have tried 15 times to install xp and I can't. Is there anything I can do to fix this?
ive been trying to reinstall windows on my pc, it will do everything fine until it starts to instal, it will get to about 50% threw the devices then it wont do annything after that, ive tryed everything i can think of to undo the installation but cant get it to work, is there something if missed for it to install correctly? if not can you tell me how to undo the new installation as its useless at the moment
Problem: Computer freezes up at random, any situation possible.From first booting sequences to loading windows itself, and when on desktop or while playing games. Anytime.The freezes started shortly after I installed Battlefield 1942, although this might not be relevant. There have been periods of time when the freezes are less common, and when they are almost constant. No heating disfunctions have been noticed, the temperature is at normal levels.Attempted Solutions : Lowering of CPU voltage, switching of RAM memory, disconnection of CD-roms.
What would be the procedure for me to change from Windows XP to Windows 2000? Does XP have to be uninstalled or can I install 2000 without that requirement? Someone told me that I could just install 2000 and, that, in effect, would override XP. But, I don't want to goof something up so I thought I had better check with the experts here first.
HI, I just installed windows 2000 professional onto my computer. Everything works fine except that the resolution is really grainy. On some web sites I cannot even make out what the words are. I found out that when I go into my monitor settings in display properties I am unable to install the drivers for my monitor. Does anybody know a way in which I can get around this.
I have just installed a fresh copy of windows XP sp2 on 2 machines. Both Dell Optiplex desktops. Usually it prompts that it has found new hardware for each device it hasn't found drivers for. Device manager lists them with a yellow exclamation icon.Problem I have now though is that the fresh install of XP does not show these prompt at all, although device manager lists them and if i go in there and update driver the device works.The problem I have is that basically i usually copy a driver heirarchy to the systemdrive and point the registry at them, which results in automatic installation on boot. This no longer works and I assume they are related as it doesn't look like it's automatically trying to install these devices.Is there a setting somewhere, seems very strange, what with it being a fresh install?
I have two computers, one I use for gaming, the other for school. Both computers had 60gb Maxtor (school with lots of room, gaming with about 10 gb free). My school HD took a powder (the evil clicky noise of doom), but I was able to back up my files prior to that. Me being a quick thinker, I decide to upgrade my gamer puter to a 120gb (don't wanna go too nutso, as I am considering building a much superior computer), and put the good 60 gb in my old Athlon 700. Problem? I cannot get Windows XP Home to complete install on my gamer computer. (Athlon 700 installed just fine with 'good' 60gb).Gamer Computer: Athlon 1800+, 512MB DDR Ram 2100, KR7A Raid MOBO, GeForce3 Ti 200 (128MB DDR RAM), SB Audigy 2(AGP).
It is a RAID mobo, but i do not use the raid functionality, I did not have a problem before(I have my HD and my 2 roms on ide now). I go through the install steps, and I get to the very very end, where it states you are about to start Windows XP, and then it hangs, and thats it.I have tried to ensure there are no conflicts, I pulled out my sound card as well as my network card, and 're-seated' my video card and RAM. I have tried looking at using a winxp bootup floppy, booted into safe mode (the only error it detects is the missing RAID, no conflicts detected there). Heck, I even swapped out mouse and keyboard. I tried putting back the good 60gb back in the pc, and reformatting, but still get the same thing(sometimes the screen is black, sometimes the icky blue of xp, but that's it).I have no idea now. I did make sure that my bios was up to date before taking down the system originally, and it was, so no change was made there. Even swapped out the ribbon cables to ensure nothing was damaged on original removal.
I want to do a fresh install of MS xp pro. The problem is I have a newer version of xp installed right now and the xp cd i have is a older version( legit cd). Because of that it won't let me re-install xp using the older cd. I do have sp2 just on a different cd. So how can I go about doing a fresh install? The reason i'm doing this is because my computer is running sluggish and I want to start over sort of speak. Any ideas what I need to do? I have the bios to boot from cd. I also get a error message that the NTLDER is missing. I've been on other forums and so far no help from them.
I've been trying to reinstall a fresh, liscenced copy of XP (sp2), but when I get the windows disc to boot, my keyboard won't work. I've tried to keep in both the usb port and to use the adapter to stick it into the dedicated keyboard slot - no luck with either. Do I have a driver issue? Under admnistrative tools/computer management/keyboards/hid keyboard device/driver/driver details, I have two different driver entries: the highlighted one on top says WINDOWS/system32/DRIVERS/kbdclass.sys and the unhighlighted one below it says WINDOWS/system32/DRIVERS/kbdhid.sys. I seem to remember adding or updating my keyboard driver at some point, but I'm not entirely sure. Can I/should I restore the kbdhid.sys driver, and if so, how do I do that exactly? Do I have some other issue? A USB driver issue perhaps? I have a number of different usb drivers as well.
As a corollary, when booting with a bootable disc (the XP disc and with my BIOS set to boot from disc first), the program asks to hit any key to boot from disc. With my keyboard plugged in normally (to the usb port), I get no response at that stage. Using the adapter, plugged into the dedicated keyboard spot, I CAN get a response, but then get no response (from either usb or dedicated keyboard connector.) when the XP disc boots up to the blue option screen.My computer knowledge is adequate but not extensive. I did build my system, but it was my first build.
I'm doing a fresh xp install on an older hp ze5700. I am able to get the machine to recognize the cd drive initially and go thru the install up until it has to reboot to set up windows. then it seems the laptop does not recoginze the cd drive and freezes on the 'setting up windows' part.
I have an athlon 1.2 asus a7a266 motherboard and 80 gig HD with XP and want to do a fresh install so I can pass it on without easy access to any past personal data.It still has a floppy and all my old boot discs say the files such as fdisk and format are not compatable with this operating sys.I made a boot from the computer but it doesn't have formatting software included.One I get it formatted with CD support I'll be on my way.
Machine is an HP pavillion, 1gb of ram, running XP. I would like to do a fresh reinstall to clean out some of the gunck stuck on this pc. What would be the best way to do this?
I recently got some virus which kept on duplicating, so my AVG antivirus could not permanently delete. So I did a clean reinstall of Windows XP Pro 32 bit with a full reformat. It is still very buggy. Some of the bugs even resemble the errors I was having before the reinstall. There were things like "could not load cmd.exe", AVG antivirus marking almost every Window's .exe as a Heur virus, "could not load login because of data execution prevention", and programs like Windows Media Player 11 and Visual Studio not being able to be completely installed.
Should I be concerend that this is a hardware issue? The harddrive should be OK because a full format should have detected bad sectors. Maybe my RAM is damaged?
I have just done a fresh install of Windows XP - all is fine.Question - I am just downloading 92 updates from the M/soft site!!! Is there anyway to get hold of these and burn them to a CD so next time.
I'll buy a new motherboard with video card, cpu and memory but I will keep the old HDD. My old mobo is burnt so I can't boot the PC. I want to do a fresh install on C: but I have some data that I need. I have a few ideas but I don't know if they'll work. 1)Can I use Windows XP Live USB edition to boot with the new mobo, copy the data from C: to another partition and then do a clean Windows install(well, only the C: partition)? 2)What if I do a Windows Repair Install, copy the data from C: to another drive and then do a clean install?(I don't think this is a good option because the user settings and program files will be deleted and I want to keep them so I will know what apps will I have to install.
Trying to do a completely fresh install of XP on a mates computer. I have booted from 2 seperate windows xp discs (both of which have worked fine previously). It gets a small way into the setup (just past RAID drivers etc) then asks "Please insert Windows XP Disk 2 or whatever (depending on which windows version) in Drive A: and press any key to continue." I have never had this happen before and am not sure how to get past it.
I'm getting ready to reformat my XP machine, it's long over due. Since I'm stuck with my older hardware: Intel P4, AGP, I'm trying to pull every available once of performance out. I'm trying not to leave anything on the table, but I'm not spending any more $$$ right now.I have 2 physical HD's. a SATA II (3.0) 320 Gig. This drive is pulled directly into the MB. Right now, it has 2 logical partitions, but only about 80G total is in use for my OS + Apps. The other drive is a SATA (1.5) 400 Gig. This drive is plugged into the PCI card that came with it, as opposed to my MB because my MB won't recognize it. It also has 2 partitions but is used only for my data and for keeping revisions of the same file. (I back up to both an external HD and an internal backup service.)
I am working with a small school as IT help (along with other hats). We recently replaced PC's in a computer lab with new IMACs. I now have these older PC's that came preinstalled with Windows XP Home on them. I was going to keep them around to use as back-ups in the classrooms or additions for tutoring,etc. My first question is, since they were used for about 2-3 years in a lab scenario, should I do a fresh install of Windows Xp or just try to clean them up the best I can. (They all are DELL running 797mhz and 512mb RAM.)
If a fresh install is the best option, I have another question.
What do I have to do to do a fresh install?? Do I just format the hard drive and restart with the XP disk inserted?? Is it that simple or is there more to it?
Late lastnight I was attacked by a nasty virus that wouldn't give control of my computer back, every attempt at a "System Restore" was met by the virus blocking my attempt. I was able to do a "System Restore" via "Safe Mode" but strange things began to happen even after the restore point, so I saved as many family pictures as possible. Bottomline, is there a safe way to scan my thumb drive for virus so that I can add my family pictures to my new fresh install?
I have never had this problem before but I am trying to do a fresh install of windows xp home on a dell dimension 2400 desktop. I deleted the current partition and then continued with the install. The computer is only currently at the "Installing Windows" portion right now and I started it at 10am this morning. So at my time it has been 7 and 1/2 hours so far. Its not frozen either. Does anyone know why it might be taken so long to install?
I have an IBM Thinkpad R51, which had Ubuntu before (and XP a long time ago.Now I reinstalled Windows XP (licensed, just in case you ask). But the wireless network adapter (internal) doesn't seem to be recognized. So I downloaded and installed the driver, but it doesn't do anything. I went to see if XP recognized the card but it doesn't, it is listed in "Other hardware" with a question mark.I do not have a wireless icon either in the notification area or the Network Connections.
Internet Explorer icon in "START" does not show the "E" icon as expected. It shows the icon (blue box with tiny tiny red, blue and green icons inside) that sometimes indicates that XP is not sure how to open the program or which program to use.However, the program WILL open.