I have been trying to install a RAID setup and I can't get past the windows installation. I have set up the BIOS correctly and I've tried using 2 different RAID floppys and still won't setup. I start the windows installation and at the F6 prompt I press the F6, when it asks for the drivers I press S and first load the Nvidia RAID driver and then again I load the Nvidia storage driver as per instructions and the installation goes until it starts the windows set up and stops right there. If I only load the Nvidia Raid driver then the set will start. The second floppy I tried using was for SATARAID floppy. Same result If I load the Nvidia SATA storage driver then It stops at Windows installation setup. I have tried installing a bootable setup and a nonbootable with no luck.
I'm planning a reformat and clean install of XP Pro in the next few days. (Intel dual core with 4 GB RAM.)The OS has been living on C drive which is a Raid 0 setup consisting of two 250 drives operating as one 500.I also have a third drive (500GB) running as D drive (I do a lot of digital photography The Plan: To replace one of the 250's with a 500 so I'll have one 250 and two 500's.
I just finished preparing my slipstreamed windows XP setup disc with the SATA drivers already on it for my nForce 4 SATA RAID setup. It will detect the drives, just fine, but displays each one as though there were no array. I've already set up the RAID array in the bios, and it detects it as a single 500gb striped RAID-0 array.Windows is asking me to install on either one drive or the other, as though there were no RAID-0 array. If this is what usually happens, would I just point windows to install to one of the drives and the BIOS will take care of the rest? Or is something else not quite right here?
my daughters computer needs to have windows xp pro reinstalled. the computer used to have a raid setup but when one of the hard drives started to fail she brought it to the computer shop and they disconnected the raid and told her the drives were separated but not to put anything important on the one drive as its not so good. so last night we tried to reinstall windows . It came to can not read drive F. Options were fail, abort or retry. Nothing worked. so she called the the computer shop and they said it was because of the raid thing when. So they told her to go to gateway sight and put a program called serial ata on a disk and install it to her computer...
i have 2 western digital 80gb on raid0. on this array i have installed windows 7 and now i want to install windows xp on another partition.the problem is that windows xp setup won't recognize my array even with the original raid driver floppy-disk. i created even an nLite customized xp with those drivers installed and it doesn't work.
Bought pc it came with something called RAID TOOL i have no idea what this is but, if i was to reinstall windows would it be crucial that this was reinstalled with it? or could i just reinstall windows xp from the disc and not worry about it?
I've setup Windows 2003 fax services on a W2K3 server and shared the device. I've tested faxing from Word on my PC and it works fine.However, when other users try to install the fax client, the setup hangs asking for the fx* setup files. I've tried different XPSP2 CDs, copying the files to a local directory, making sure that the users have local admin rights (and even domain admin rights) but to no avail. The files are already in the system32 directory so in theory the setup doesn't even need to copy them. Even if I delete them, it doesn't work.Our corporate SMS team reckons that there isn't any policy which could cause the problem.
My computer uses SATA HD. Right now it functions properly and boots into Windows just fine. But I need to reinstall the XP Pro. So I boot from the CD but the setup does not see any HD. Are there any special instructions on installing on a SATA HD?
I am using Windows XP Professional, service pack 1 is installed. A few days ago the PC would not boot up. I had to reinstall Win XP Pro. All my programs had to be reinstalled because Windows did not acknowledge they were there. All 23 of them work fine. Here's where I ran into a problem. I use a Matrox G200 Quad card with TV Tuner. I downloaded and installed the software for the card and that too is fine. When I download the software for the TV part of the card to work, I double click on the unzipped set up file and it starts working, that gets to the part where it says "Preparing to Install" then it just disappears. It worked before the reinstall of windows.How can i figure it out.
Everytime I attempt to install it will present me with a message stating the following: Service Pack 2 setup could not backup registry key HKLMSoftware MicrosoftCurrentVersionUninstallQ282010 to file C:Windows$NtServicePackUninstall$ eg01617. 5: Access Denied
So a few days ago I began re-installing XP on my laptop. Unfortunately I didn't realise that I'd grabbed the wrong installation CD, and instead of installing XP Pro sp2, I was installing XP Home sp1. This shouldn't have been problematic however I couldn't find the product key for it to continue the installation process, so I had to abort the installation.
However, now when I try to install XP pro sp2 (by booting from the CD drive) it goes straight to the point that i previously aborted from and gives me an error message stating something along the lines of "you've inserted the wrong CD, insert the right CD and press continue". I can't seem to get it to start the install process from the beginning
I am trying to install XP Pro on a machine with an AMD K6 clocked at 266mhz and 160mb of RAM. This is a laptop currently running Windows 98 SE. 98 works fine for me but I hate installing drivers. The laptop is an Compaq Presario 1235. I just want the laptop running XP, it doesn't have to be lightning fast. In setup, it hangs at Setup is Starting Windows. It does the same when installing Win2k.
I got a new SATA 320 GB hard drive today, since my other one died. I setup the drivers for it with help of the Windows XP disc, and start to install Windows.
I get to the part where I enter the product key, and I get a prompt that it is invalid. I have entered the key at least 40 times to make sure I haven't mistyped it. I have looked at the Windows Support page and search around
I recently purchased a Western Digital laptop hard drive for my HP Presario X1015US laptop - and got the part where it said : Setup did not find any hard disk drives installed on my computer. I have tried two new drives now and it is simply not getting past this point. I have gone in to the bios to ensure it is booting from Windows Operating System CD and it is still not finding. HP told me I have to check motherboard? Is there anything else I can do or am I going to need to buy a new laptop (the old hard drive is no longer working...started making weird noise).
Trying to install XP on a SATA W.D. Raptor I've did it before but now when I put the floppy in for the Drivers I keep getting TXTSETUP.OEM missing I've checked the floppy for its contents and it is there, The drive has XP Pro on it now but been running it for a year and like to clean it up.
I have used the search facility to try and find a result to this problem but alas to no avail.I have had XP pro in this desktop before so I know it's compatible. Recently I decided to upgrade to Vista but decided that it wasn't for me and have tried to downgrade back to XP.On first try with XP pro setup bootdisk I got by said problem and got to the format/partition bit but got error message saying unable to load operating system half way through install. I figured it could be because i didn't set up boot in bios properly using bootup selector instead and upon restart during install it tried to boot from hd.
So restarted and sorted bios selection out but now get this wierd problem, being on ANY install disk of XP (I have a few) it jams after "setup is inspecting your computers hardware" i.e. blank screen and nothing happening. I've tried unplugging everything and leaving only cd-rom, hard-drive and monitor/keyboard/gfx card and mouse connected but all to no avail.The drive I'm trying to install to is a samsung 150gb hard drive partitioned to 20gb and 130gb respectively with data still on the 130gb section that i'd like to keep.The most interesting thing is that the Vista disk that I have installs fine without problem which is how I'm writing this.
I have been having problems when i tried reverting from windows 7 back to Windows XP Home Edition. At first i was able to get to windows setup (Blue screen) when i had the disc and partitioned to install the XP Disc. The computer restarted and i get to "press any key to continue (with the disc)" and i do so and it says "set up is inspecting your computers hardware" and then screen turns black and nothing appears. When i take the disc out it says "Error Loading Operating System". I can't really do much of anything now. Only screen i can get to is f1 to the "bios setup utility".I have an HP a450n.. Really need help i been wanting to use XP again because windows 7 annoyed me because it lagged my games. it has ran windows xp before and worked very good as well as for the games.
A dell 8600 laptop i had xp on it it was running slow for the last few days & i tried to reinstall it the system crashed during set up and i had to restart it and when it restarted it said set up is restarting and then it showed fatal error one of the components that windows needs to continue could not be installed manifest phrase error invalid at the top level of the document press ok to view log file and when i do thatthe log file appears and when i close it it restarts the comp and aganin goes through the same fatal error i have tried the safe mood and it says setup can't run in safe mood i have tried the last good config it won't run.
A week ago I had some malware crap going on and was going to reinstall windows. The windows XP setup crashed partway through (was having some hardware malfunctions too so the comp crashed). I fired windows back up and found Malwarebytes. Ran it and it got rid of the malware and I was back to functional windows with no issues.Now at startup, I have a dual boot selection between Windows XP (which works normal) and the windows XP setup. How do I get rid of the Windows XP setup option so that it loads into WinXP normal?
My system is setup to download updates automatically, but prompt me to install them. I've downloaded a few updates (WMP, IE 7) but decided to install them at a later time. Well, I'd like to install them now, but the little yellow shield isnt in the system tray anymore. Is there a way to install them? I went to the microsoft website and the automatic scan says I have all of the most recent updates (yeah, I have them, but cant find them now).
So I think I was affected by the SP3 update. I went out and got another harddrive to reinstall on since the other harddrive wouldn't even boot up. I can format the disc and the setup files load and then the system does the reboot. But after it reboots it ask me if I want to install XP and it takes me through the prompts of which drive I want to partition.
i recently wanted to installed a few windows components from the windows xp installation cd. during the install i cancelled it. but the next day when i booted up the pc i got two options in the boot menu. It asked wether i wanted to boot "windows xp home edition" or "windows xp setup" How do i get rid of this "windows xp setup" boot option?
when I try to install XP onto a new hard drive it hangs on the first blue setup page with windows setup showing on the top line and nothing at the bottom to continue with. I updated the BIOS on the original motherboard and have now fitted a new MB but still the problem is the same. Everything was fine before the original drive went down with death rattles.
When I open to read my e-mails I get a message saying Failed to install Adobe Flash player Activex Setup. What can I do to remove this message when I openmy e-mails?
Got new parts for PC upgrade. All parts new (including cables) but recycled HDD and DVD/CD-ROM.All bits connected and powered up last night in about 10 mins. Put Windows XP CD in, went into setup/ reformat process then PC needed rebooting to continue with Windows setup. Fine. or so I thought. rebooted, went into "Please press any key to boot from CD". IF pressed any key, went through the whole reformat, copy setup files etc. ELSE, just hangs on that screenie. No error messages or anything!Seems to me like it's gone into a loop, and not running the Windows set-up files copied into the HDD.
I have a HP laptop that once ran on Vista. This summer before I left for college,I decided that it was finally time to downgrade to XP,seeing as I had backed up everything, and classes would be starting in a week.So I did the usual thing. Insert CD, restart computer,"A problem has been detected, and Windows has shut down...."Blue Screen of Death. The Stop Message: 0x0000007B (0xF78D254, 0x00000034,0x00000000,0x00000000)
I'm going crazy with this issue and I cannot find any possible solutions. I hope someone in here can help me somehow.Let me explain what's my situation. I have a SATA drive (WD 160GB) I had Windows XP installed on my machine until yesterday that I decided to try a beta version of Vista. Now, I want to get rid of Windows Vista and install XP again. However, when I insert my CD to boot, after it loads all the files,etc...It shows me this message Quote: Setup did not find any hard disk drives installed in your computer.
Quote :Make sure any hard drives are powered on properly connected to your computer,and that any disk-related hardware configuration is correct.This may involve running a manufacturer-supplied diagnostic or setup program. Setup cannot continue. To quit Setup, press F3.
When I try to install Java, I get the following error message:Error 1304.Error writing to file C:Program FilesCommon FilesJavaUpdateBase Imagesjre1.6.0.b105 patch-jre1.6.0_05.b13launcher.exe. Verify that you have access to that directory Well I go to that directory and double-click it, and I get the following messsage:Windows cannot access the specified device, path or file. You may not have the appropriate permissions to acces the item.
