I've bought a new notebook.The specifications you can see from my profile.
I've got an AMD Athlon 64X, X2 1.80GHz TK-55 Processor.
I've tryed to install the Windows XP SP2 64X Edition, at the setup Windows didn't install?!
I recently purchased a Western Digital laptop hard drive for my HP Presario X1015US laptop - and got the part where it said : Setup did not find any hard disk drives installed on my computer. I have tried two new drives now and it is simply not getting past this point. I have gone in to the bios to ensure it is booting from Windows Operating System CD and it is still not finding. HP told me I have to check motherboard? Is there anything else I can do or am I going to need to buy a new laptop (the old hard drive is no longer working...started making weird noise).
i recently wanted to installed a few windows components from the windows xp installation cd. during the install i cancelled it. but the next day when i booted up the pc i got two options in the boot menu. It asked wether i wanted to boot "windows xp home edition" or "windows xp setup" How do i get rid of this "windows xp setup" boot option?
Every time I reboot a setup window appears. When I click the next button an error say can not install on windows NT.
View 5 Replies View RelatedI'm thinking about Re-formatting my computer. i seem to get a new pc every few months,lol, so i have never actually done it before. My current pc is a stor brought one and unfortunatley i didn't not get the Windows XP cd when i purchased it. for the Windows cd and was wondering if there are any other ways to Re-format my pc, i have hered about getting an OEM version of XP, will that be ok
View 5 Replies View RelatedI've just tried turning my computer on this morning and it's not quite working - I'm on a friends computer at the moment.I'm running window XP, I have recently had some help from the 'spyware, malware' section of this forum in removing some virus's and trojans, we managed to stop all the intial problems however now.When I turn the system on, it does it's first page fine (the one that has the system information) then goes to the screen that says "windows didn't start successfully, a recent hardware or software change might have caused this" and gives me the start up options of 'safe mode', safe mode with networking', 'safe mode with command prompt', 'start windows normally' and 'last known good configuration'. I've selected all the options once and they all do the same thing - once selected it goes to the windows xp screen and looks likes it's loading then a blue screen with some information on it pops up for a micro second, the system then restarts itself and goes back to the safe mode options screen.
View 7 Replies View RelatedI am trying to install xp on this good friend of mine's machine that took a dive last week. We replaced the motherboard, cpu, and memory. And afterwords for about 3 days, it seemed to function ok. Then it just quit booting. I told him we would need to reinstall windows. I was kind of shocked we did not have to in the first place. Anyways, So now I am trying to reinstall windows:I can get it to boot from the windows cd, it goes through the standard list of drivers, and at the end says, "setup is starting windows"... Then it just hangs there indefinately. Typically after this, you get to the screen that asks you if you want to install windows, then you hit f8 to agree to there stuff, then you get to partition ect. I mention these things so you will know what part I am talking about.
View 5 Replies View RelatedI have an Intel 945GTP motherboard running XP Pro on a SATA HDD that, until last week, worked just fine. Then, it decided not to boot up one morning, in either regular or safe mode.It won't boot from the CDROM drive either. It does boot from floppy.I've replaced RAM, taken out all non-essential hardware, replaced HDD cables.HDD can be recognised in another system.Mouse and KB are not usb.I removed the HDD partition, intending to reload XP, but the load hangs on "setup is starting windows" and never goes anywhere - i left it overnight, just to be sure.I repartitioned and reformatted using a 98 disk, just for kicks, to see if it'd work. Yep, boots to c:> HDD manufacturer's diagnostic reports no errors.I have put in another, new SATA HDD, as well as a new ide hdd.
View 1 Replies View RelatedI've setup Windows 2003 fax services on a W2K3 server and shared the device. I've tested faxing from Word on my PC and it works fine.However, when other users try to install the fax client, the setup hangs asking for the fx* setup files. I've tried different XPSP2 CDs, copying the files to a local directory, making sure that the users have local admin rights (and even domain admin rights) but to no avail. The files are already in the system32 directory so in theory the setup doesn't even need to copy them. Even if I delete them, it doesn't work.Our corporate SMS team reckons that there isn't any policy which could
cause the problem.
I went to try to install windows xp onto a computer that already had windows on it. I did not boot from the cd. To do it without using the cd it has to copy the installation files to the computer and then run them. When setup does this it creates a new choice of an operating system to boot from called "Windows XP Setup." So now I have a Windows XP and a Windows XP setup. I've been in msconfig and looked at boot.ini but that didn't help
View 8 Replies View RelatedI downloaded a program from Ebay and after installing it I noticed it didn't have a uninstall. I used my add & remove program to uninstall the program but not all of it got uninstalled. I deleted the folder and then did a search in my registry for anything with refernce to the programs name "Ebay's Blackthorne" and deleted all entries with that name.Every time I reboot windows tries to install something for Blackthorne and I have to keep cancelling it out.
View 11 Replies View RelatedI have been noticing that whenever I reboot my computer, or even at random intervals, that the wave portion of the volume menu goes to zero and it makes the sound on my computer go very quiet. I can move the wave dial back to the max and everything works alright, but I was wondering if anyone has any ideas on why this would be happening. I am running the onboard sound which is nvidia based, but not sure if there are any more current drivers than what I am running.
View 2 Replies View RelatedHad to reformat my drive and now whenever i use my win xp sp2 install disc...i first format the drive and create the proper partition..the windows disc then starts copying files to the computer but at a point i get an error message saying that windows setup cannot copy the file...and it tells me which file. I redid this several times and each time at a some point in the copying it gives me this error...each time with a different file name
What should i do at this stage?
I am trying to install windows xp sp 2 over windows xp on 2 computers and the same thing has happened with each computer.I get down to 36 minutes left - installing drivers - and the setup restarts. I tried to remove the cd and xp then asks for the cd telling me it needs the asms driver, xp then is directed to search e:I386. Xp looks for it there then spontaneously restarts again. The setup is in an endless loop going from 39 minutes remaining till 34 then restarting over and over again. How can I stop this and/or correct this? I did some research at the microsoft site but I have been unable to make anything work.
View 3 Replies View Relatedusing windows xp how do I get in the BIOS Setup screen
View 1 Replies View RelatedI can't get XP Pro to get past "Setup is starting Windows" ,to allow me to format.Loads all drivers up to that point,then the error in above post.Pressing F6 or F10 to install 3rd party(XFX MB drivers) has no effect,and Alt-F2 ultimately gives error also.S prompt is no joy also.Tried F8 for Safe Boot and no joy.Cleared CMOS several times.All drives are there in CMOS. All RAM (4 Gigs) is detected I raised Memory voltage to 1.9 volts standard for my ram),and raised FSB to 1600 Mhz from 1333 (standard also).Put timings to standard 7-7-7-24T Tried Memory linked/unlinked/Auto/1T/2T I Tried only 1 SATA drive,and 1 Gig of RAM with 1 DVD RW /2 drives and 2 Gig of RAM,I Enabled standard RAID for each and every drive and ultimately disabled them cause I want the XFX 790i ultra motherboard RAID Drivers.
View 6 Replies View RelatedWhen i put in teh Win xp disc its starts loading teh file etc.. and then when done after i press enter and "Setup is starting windows" its freezes andi get liek A black dot and a few like patterns on the screen or soemtimes teh screen just goes mad liek with different colourd patterns but ontop of the blue "Setup is starting windows" screen ive checked teh disc and made a copy both work fine checked teh CD rom works fine put a diffremnt cd rom drive in and made no difference cant check ram because my computer doesnt take DDR2. ive put diffrent IDE harddives in with and without a SATA convoertor and the same thing happens with the "Setup is starting windows" also when i start the computer up before i boot from cd or anything after all that without booting from CD i get a BSOD code 0x07B.
View 8 Replies View RelatedI want to install Windows XP Pro 64 Bit on my Hp dv9907ca, which came with Vista Home Premium 32 Bit. I upgraded my RAM to four gigs, and get better gaming on XP and I'd like to upgrade my 32 bit to 64, problem is, the installation hangs as soon as it gets to 'Setup is loading Windows' still int he text based installation. I believe I read somehwere it's because of some sort of hard drive connection that's in newer computers, and XP doesn't have drivers for it. So basically, I'm wondering if soeone can figure out what's wrong, and tell me exactly what I need to do in order to get XP to work, now this is a laptop so I can't change any parts in it or anything like that.
View 10 Replies View Relatedi'm trying to reinstall my windows xp Pro onto my computer Boot will recognize that the XP CD is in the drive, DO NOT press any keys, let setup bypass the CD boot. and it doesn't display the "Press any key to boot from CD.."All it does is restart the setup again, something flashes past fast and then it starts the setup all over.
View 1 Replies View RelatedWhen I start my pc I get an option to either start Windows XP or to run Windows XP Setup. If I am not quick then it automatically selects Windows XP setup where it goes into the intial setup screens where I need to quit and re-boot the PC. There is nothing wrong with my pc and I have no need to carry out any setup tasks, what I want to do is to get rid of this option.
View 4 Replies View RelatedMy computer uses SATA HD. Right now it functions properly and boots into
Windows just fine. But I need to reinstall the XP Pro. So I boot from the CD
but the setup does not see any HD. Are there any special instructions on
installing on a SATA HD?
I have been trying to install a RAID setup and I can't get past the windows installation. I have set up the BIOS correctly and I've tried using 2 different RAID floppys and still won't setup. I start the windows installation and at the F6 prompt I press the F6, when it asks for the drivers I press S and first load the Nvidia RAID driver and then again I load the Nvidia storage driver as per instructions and the installation goes until it starts the windows set up and stops right there. If I only load the Nvidia Raid driver then the set will start. The second floppy I tried using was for SATARAID floppy. Same result If I load the Nvidia SATA storage driver then It stops at Windows installation setup. I have tried installing a bootable setup and a nonbootable with no luck.
View 14 Replies View RelatedI got the error screen
The file serial.sys is corrupted.
Press any key to continue
... and at the bottom it says
Setup failed. press any key to restart your computer.
Any ideas ?
A while back I tried to reload the entire WinXP and start from scratch due to some viruses and what not. Before I could complete the process, I decided to try to fix the problems one last time. It Worked. Now when I turn the computer on It automatically directs me to a blue windows setup screen. In order to start WinXP I must manually select windows in the three second time limit.How do I get my computer to automatically start windows at start up?
View 7 Replies View RelatedI have a new computer with a 120g hard drive and a 20g hard drive as a slave. I also have 1 gig of memory.In setting up partitions for my computer, is it ok to have just one partition or should I make several?I do nothing fancy on this computer as far as gaming or any type of designing. All I am interested in is just an easy way to setup and maintain my system.
View 9 Replies View RelatedI am using Windows XP Professional, service pack 1 is installed. A few days ago the PC would not boot up. I had to reinstall Win XP Pro. All my programs had to be reinstalled because Windows did not acknowledge they were there. All 23 of them work fine. Here's where I ran into a problem. I use a Matrox G200 Quad card with TV Tuner. I downloaded and installed the software for the card and that too is fine. When I download the software for the TV part of the card to work, I double click on the unzipped set up file and it starts working, that gets to the part where it says "Preparing to Install" then it just disappears. It worked before the reinstall of windows.How can i figure it out.
View 2 Replies View Relatedi am trying to install windows xp pro (sp2) on my new pc but i get this message:
"setup cannot copy the file: sprb0402.dll".
does anyone know what's going on?
hardw:
intel p4 3.0
msi intel 945p express chipset
2x1GB DDR 533 memory (dual channel mode enabled)
msi ati radeon x300HM 128mb
1x HD wd raptor
2x HD wd sata II
Everytime I attempt to install it will present me with a message stating the following: Service Pack 2 setup could not backup registry key HKLMSoftware MicrosoftCurrentVersionUninstallQ282010 to file C:Windows$NtServicePackUninstall$ eg01617. 5: Access Denied
View 5 Replies View RelatedSo a few days ago I began re-installing XP on my laptop. Unfortunately I didn't realise that I'd grabbed the wrong installation CD, and instead of installing XP Pro sp2, I was installing XP Home sp1. This shouldn't have been problematic however I couldn't find the product key for it to continue the installation process, so I had to abort the installation.
However, now when I try to install XP pro sp2 (by booting from the CD drive) it goes straight to the point that i previously aborted from and gives me an error message stating something along the lines of "you've inserted the wrong CD, insert the right CD and press continue". I can't seem to get it to start the install process from the beginning
I am trying to install XP Pro on a machine with an AMD K6 clocked at 266mhz and 160mb of RAM. This is a laptop currently running Windows 98 SE. 98 works fine for me but I hate installing drivers. The laptop is an Compaq Presario 1235. I just want the laptop running XP, it doesn't have to be lightning fast. In setup, it hangs at Setup is Starting Windows. It does the same when installing Win2k.
View 4 Replies View RelatedI got a new SATA 320 GB hard drive today, since my other one died. I setup the drivers for it with help of the Windows XP disc, and start to install Windows.
I get to the part where I enter the product key, and I get a prompt that it is invalid. I have entered the key at least 40 times to make sure I haven't mistyped it. I have looked at the Windows Support page and search around