I Have On Setup File That Will Not Finish The Install:
Jan 22, 2005
I am using Windows XP Professional, service pack 1 is installed. A few days ago the PC would not boot up. I had to reinstall Win XP Pro. All my programs had to be reinstalled because Windows did not acknowledge they were there. All 23 of them work fine. Here's where I ran into a problem. I use a Matrox G200 Quad card with TV Tuner. I downloaded and installed the software for the card and that too is fine. When I download the software for the TV part of the card to work, I double click on the unzipped set up file and it starts working, that gets to the part where it says "Preparing to Install" then it just disappears. It worked before the reinstall of windows.How can i figure it out.
View 2 Replies
ADVERTISEMENT
Jul 12, 2010
Installing on a rather old, but still well functioning machine with a Gigabyte RZ series MB, a 3DForce4 video card, 1G RAM, Intel P4, one cd connected, a floppy for no use tho I suppose, usb connected mouse and keyboard. It starts like it's working fine, it formats the drive, it copies files, then it says it needs to reboot to continue set up and then when it turns back on, it just starts the same process all over again, it doesn't move to the next step. The OEM disk was sealed and all so I don't know why it would be the disk, I did buy it off ebay I think, but then again maybe it was newegg. I mean the min requirements for xp are still below what this machine has and the machine itself works because I was just using it myself up til about couple weeks go when I put my new computer together. This is for my Dad and I need to get it working, his old computer, my old old computer is really on the fritz now. Win 7 loaded on mine in a jiffy and now 3 and half hours later I can't make headways getting xp onto his.
View 14 Replies
View Related
Mar 14, 2008
I have a deskstar 7K250 60 GB HDD hard drive and Im installing into a compaq with a motherboard cr 120 (i know putting big hard drive into that crap) anyway and the other hard drive is a Seagate Medalist 6423. well the desk star was originally partitioned into 2 drives I kinda unpartitioned it and repartitioned it later.Now then with the Seagate in their as the master I can still use the deskstar to store data. however if i try to load XP on the deskstar alone it will get through the dos format and all the way till it restarts.
after it restarts it wont load the os all the cables are connected its been partitioned into 2 drives again (though i dont think that had anything to do with it) although i think its pointless cuz i do get the 1720 SMART error but i hope thats a false sign.cuz when i have the seagate as the master im able to use it for just storing **** but Im just at my wits end and im thinkin of going "office space" on the hard drive plz i need help idk if its not compatible or what. any help would be appreciated.
View 1 Replies
View Related
Dec 18, 2005
i am trying to install windows xp pro (sp2) on my new pc but i get this message:
"setup cannot copy the file: sprb0402.dll".
does anyone know what's going on?
hardw:
intel p4 3.0
msi intel 945p express chipset
2x1GB DDR 533 memory (dual channel mode enabled)
msi ati radeon x300HM 128mb
1x HD wd raptor
2x HD wd sata II
View 3 Replies
View Related
Jul 12, 2010
can't finish install sp2 operating system.
View 2 Replies
View Related
Aug 20, 2005
I've setup Windows 2003 fax services on a W2K3 server and shared the device. I've tested faxing from Word on my PC and it works fine.However, when other users try to install the fax client, the setup hangs asking for the fx* setup files. I've tried different XPSP2 CDs, copying the files to a local directory, making sure that the users have local admin rights (and even domain admin rights) but to no avail. The files are already in the system32 directory so in theory the setup doesn't even need to copy them. Even if I delete them, it doesn't work.Our corporate SMS team reckons that there isn't any policy which could
cause the problem.
View 1 Replies
View Related
Jan 26, 2008
I reecently installed Vista on my computer to try it out and after a few weeks wanted to change back to XP Pro as has some things i did not like.
Here's what i did:
1. I booted into BIOS and changed the bootup to cd/dvd.
2. Booted with my Original CP PRO cd (Not bought with my computer bought after).
3. followed the instructions and deleted the partition on C and formatted (Full not Quick) the C: drive with NTFS.
It gets to the stage that the SETUP is copying files and after 43% and says it cannot copy file WOWEB.exe and to press Esc to skip, F3 to QUIT and ENTER to try again.
It does this with a whole lot of files (Over 30) then after skipping thise files it reboots and gets the BLUE SCREEN OF DEATH!!!.
I have 2 DVD drives and tried both with the same result. I tried a differant Windows XP disk with the same results.
The motherboard has a backup facility which i had backed up previously with XP but not fully and can restore to that point but i want a complete reinstall.
I have formatted and installed windows XP with that disc loads of times without any problems before.
what should i do?
View 14 Replies
View Related
Nov 30, 2006
I have a prob
Laptop P4 running XP Pro
Can't load Office XP because I get an error missing setup.ini file.
Ran a spyware but no help.
Any suggestions??
View 14 Replies
View Related
Mar 25, 2008
I am reformatting and reinstalling Windows XP Home in my dell inspiron 600m and I got the following error during the installation:
Setup cannot copy the file vga.dll.
Anyone know how to fix it? What happens if I choose to ignore the warning and install the Windows anyway?
View 2 Replies
View Related
Apr 26, 2006
my computer is not starting up.It seems that when my computer "loads up," it quickly flashes some blue screen uber language and reboots. The only options I have are to start windows up normally, start up with last working settings, or safe mode. None of these work, and always lead to the same result: a reboot.
Does this sound like a virus problem or a broken hardware problem or what? I use XP, btw.
View 9 Replies
View Related
Sep 8, 2005
My computer uses SATA HD. Right now it functions properly and boots into
Windows just fine. But I need to reinstall the XP Pro. So I boot from the CD
but the setup does not see any HD. Are there any special instructions on
installing on a SATA HD?
View 1 Replies
View Related
Sep 9, 2007
I have been trying to install a RAID setup and I can't get past the windows installation. I have set up the BIOS correctly and I've tried using 2 different RAID floppys and still won't setup. I start the windows installation and at the F6 prompt I press the F6, when it asks for the drivers I press S and first load the Nvidia RAID driver and then again I load the Nvidia storage driver as per instructions and the installation goes until it starts the windows set up and stops right there. If I only load the Nvidia Raid driver then the set will start. The second floppy I tried using was for SATARAID floppy. Same result If I load the Nvidia SATA storage driver then It stops at Windows installation setup. I have tried installing a bootable setup and a nonbootable with no luck.
View 14 Replies
View Related
Oct 17, 2005
Had to reformat my drive and now whenever i use my win xp sp2 install disc...i first format the drive and create the proper partition..the windows disc then starts copying files to the computer but at a point i get an error message saying that windows setup cannot copy the file...and it tells me which file. I redid this several times and each time at a some point in the copying it gives me this error...each time with a different file name
What should i do at this stage?
View 1 Replies
View Related
Aug 20, 2008
I've got a message popped up that says I need to install XP service pack 3.
I let it install, but it gets stcuk on the following error:
"Setup cannot copy the file wscsvc.dll"
It gives the path for the file as:
c:windowssystem32
I've checked in the path and the file definitely exists.
The message below the error says:
"Ensure that the location specifield below is correct, or change it and insert 'Windows XP System Files'in the drive you specify"
This message does not make much sense to me.
Is there a particular application running that could be stopping access to this file?
I've tried closing down all applications: but still no joy.
What am I doing wrong?
View 3 Replies
View Related
Sep 29, 2006
Is there any way to extract a setup file to see its contents.?
View 4 Replies
View Related
Feb 2, 2006
When I start my computer it usually takes a minute or two to load everything, but then when I try to click on any icon nothing happens. If I run the mouse over the toolbar at the bottom of the screen I see the hourglass instead of the arrow which I am used to seeing. I have to shut it down cold since nothing will work and I usually do this 2-3 times and then it finally loads completely. I can use the cont/alt/del feature and nothing is showing any action except for "system idle process" which is at 98%. I have tried running all the usual virus scans/adaware/spybot. Everything looks fine. The computer runs just fine after it finally loads. And I have waiting a half hour or so before trying to click on anything and some days it is still not fully loaded yet. It seems like it is just getting hung up somewhere just when its almost finished loading.
View 2 Replies
View Related
Oct 20, 2007
I have Windows xp and when I turn off the session, the computer does not finish the shutting down process. How can I correct this problem? I have to turn always off the electricity source.
View 2 Replies
View Related
May 17, 2008
My computer will not finish the start up process. Once it gets to the "Windows is starting up" screen, it stops. Normally after it finishes this, it goes to "Applying your personal settings", but it does not get that far.My system's information:Gateway 420GR.Purchased on January 16, 2005.Background on my issue:This issue started yesterday. I left my computer running through the night, and while I was at work. I have it scheduled to shut down every week day at noon, so that it has had a few hours to rest before I get home.I first discovered the issue when I started up my computer earlier today.
View 3 Replies
View Related
Dec 30, 2005
Everytime I attempt to install it will present me with a message stating the following: Service Pack 2 setup could not backup registry key HKLMSoftware MicrosoftCurrentVersionUninstallQ282010 to file C:Windows$NtServicePackUninstall$ eg01617. 5: Access Denied
View 5 Replies
View Related
Feb 22, 2008
I've bought a new notebook.The specifications you can see from my profile.
I've got an AMD Athlon 64X, X2 1.80GHz TK-55 Processor.
I've tryed to install the Windows XP SP2 64X Edition, at the setup Windows didn't install?!
View 2 Replies
View Related
Oct 28, 2007
So a few days ago I began re-installing XP on my laptop. Unfortunately I didn't realise that I'd grabbed the wrong installation CD, and instead of installing XP Pro sp2, I was installing XP Home sp1. This shouldn't have been problematic however I couldn't find the product key for it to continue the installation process, so I had to abort the installation.
However, now when I try to install XP pro sp2 (by booting from the CD drive) it goes straight to the point that i previously aborted from and gives me an error message stating something along the lines of "you've inserted the wrong CD, insert the right CD and press continue". I can't seem to get it to start the install process from the beginning
View 12 Replies
View Related
Aug 29, 2008
I am trying to install XP Pro on a machine with an AMD K6 clocked at 266mhz and 160mb of RAM. This is a laptop currently running Windows 98 SE. 98 works fine for me but I hate installing drivers. The laptop is an Compaq Presario 1235. I just want the laptop running XP, it doesn't have to be lightning fast. In setup, it hangs at Setup is Starting Windows. It does the same when installing Win2k.
View 4 Replies
View Related
Aug 20, 2006
I got a new SATA 320 GB hard drive today, since my other one died. I setup the drivers for it with help of the Windows XP disc, and start to install Windows.
I get to the part where I enter the product key, and I get a prompt that it is invalid. I have entered the key at least 40 times to make sure I haven't mistyped it. I have looked at the Windows Support page and search around
View 3 Replies
View Related
Mar 11, 2005
I get this error when i launch a setup file
<<16 Bit Windows Subsystem>> //Title\
<<C:WINDOWSSYSTEM32AUTOEXEC.NT.The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close to terminate the application'>> //Description\
and there is another button 'ignore'
<<>>
i tried both choices and neither of them worked
i think it's a compatibility issue but the problem is that i launched the same setup files b4 and they worked,,i have WINXP Pro SP2 and i think i've had this problem after i installed the SP2,,i right-clicked the setup file and i changed some of the compatibility options and it still doesn't work.
View 3 Replies
View Related
May 15, 2010
Computer: Winxp Pro SP2 4x256MB (1GB)(2 Hard Drive, 2 CD Drives)After virus recovery (from Rogue Antivirus) - The issues is we are missing games and some accessory (entertainment) programs.So - thought I'd reinstall them...
Trying to add (games) via Add/remove programs - Add "windows components"
Select accessories Prompts me to put in Win XP Pro cd Getting Copy Error " Setup cannot copy file XXX,XXX It prompts me to use files found in I386 directory. - I see the files it wants but unable to copy.
View 3 Replies
View Related
Aug 13, 2009
My mainboard is an Asrock AOD790GX/128MI am trying to set up a fresh install of windows XP pro SP3 on a single hard drive.I don’t want the RAID feature just the AHCI.I have set OnChip “SATA Operation Mode” option to AHCI and connected my HD to the SATA1 port and my DVD drive to SATA4 port.I have made a floppy disc with the AHCI driver “AMD AHCI Compatible RAID Controller- x86 platform” for xp from the included mainboard CD. The only driver present although I don’t need RAID I have booted my computer with my windows XP CD in. Then pressed F6 when prompted. I then put my floppy disc in with the driver on and press "S" I then select "AMD AHCI Compatible RAID Controller-x86 platform" and press enter.
View 2 Replies
View Related
Mar 31, 2005
In yet another effort to clear up my own "Delayed Write Failed" error, I was trying a suggestion HotFix ( Q331958 ).
Unfortunately, installation of this HotFix keeps failing with the message :
"Q331958 Setup Error Setup could not verify the integrity of the file Update.inf
Make sure the Cryptographic Service is running on this computer."
View 1 Replies
View Related
Aug 17, 2007
Two computers running windows xp professional and each computer has 3 different NIC cards. 1 wireless, 1 wired through switch and 1 wired directly. I used the network setup wizard to configure file sharing however neither computer can see the other's shared folders. The only firewall running is the default windows firewall. I suspect it has something to do with the different NIC cards and it is trying to find shared folders using the wireless as opposed to through the LAN.
View 8 Replies
View Related
Apr 28, 2008
Got this error at 20% while copying the data and files.. it prompt me Setup cannot copy the file: kodak_dc.icm If you are installing from a CD, pls put the correct CD inside..the cd are original and it new, i have no problem repair last time..now got this error.?
View 6 Replies
View Related
Oct 15, 2010
I recently purchased a Western Digital laptop hard drive for my HP Presario X1015US laptop - and got the part where it said : Setup did not find any hard disk drives installed on my computer. I have tried two new drives now and it is simply not getting past this point. I have gone in to the bios to ensure it is booting from Windows Operating System CD and it is still not finding. HP told me I have to check motherboard? Is there anything else I can do or am I going to need to buy a new laptop (the old hard drive is no longer working...started making weird noise).
View 2 Replies
View Related
Apr 21, 2005
Trying to install XP on a SATA W.D. Raptor I've did it before but now when I put the floppy in for the Drivers I keep getting TXTSETUP.OEM missing I've checked the floppy for its contents and it is there, The drive has XP Pro on it now but been running it for a year and like to clean it up.
View 1 Replies
View Related
