Setup Can Not Copy File - Booted My Computer
Aug 13, 2009
My mainboard is an Asrock AOD790GX/128MI am trying to set up a fresh install of windows XP pro SP3 on a single hard drive.I don’t want the RAID feature just the AHCI.I have set OnChip “SATA Operation Mode” option to AHCI and connected my HD to the SATA1 port and my DVD drive to SATA4 port.I have made a floppy disc with the AHCI driver “AMD AHCI Compatible RAID Controller- x86 platform” for xp from the included mainboard CD. The only driver present although I don’t need RAID I have booted my computer with my windows XP CD in. Then pressed F6 when prompted. I then put my floppy disc in with the driver on and press "S" I then select "AMD AHCI Compatible RAID Controller-x86 platform" and press enter.
View 2 Replies
ADVERTISEMENT
Jul 4, 2005
I'm trying to install UPnP on my system but I get this error message. The
dll file IS there. I have tried downloading the file from the internet and
Browsing to it on the desktop but it always gives this error message.
Why can't Windows accept this file?
View 2 Replies
View Related
Apr 4, 2006
When a virus problem was found, my friend eliminated a file when Norton advised him to do so . After deleting the file he now receives the below error message each time the computer is booted. crogra~1softwar~1soproc.exe
View 1 Replies
View Related
Jan 26, 2008
I reecently installed Vista on my computer to try it out and after a few weeks wanted to change back to XP Pro as has some things i did not like.
Here's what i did:
1. I booted into BIOS and changed the bootup to cd/dvd.
2. Booted with my Original CP PRO cd (Not bought with my computer bought after).
3. followed the instructions and deleted the partition on C and formatted (Full not Quick) the C: drive with NTFS.
It gets to the stage that the SETUP is copying files and after 43% and says it cannot copy file WOWEB.exe and to press Esc to skip, F3 to QUIT and ENTER to try again.
It does this with a whole lot of files (Over 30) then after skipping thise files it reboots and gets the BLUE SCREEN OF DEATH!!!.
I have 2 DVD drives and tried both with the same result. I tried a differant Windows XP disk with the same results.
The motherboard has a backup facility which i had backed up previously with XP but not fully and can restore to that point but i want a complete reinstall.
I have formatted and installed windows XP with that disc loads of times without any problems before.
what should i do?
View 14 Replies
View Related
Mar 25, 2008
I am reformatting and reinstalling Windows XP Home in my dell inspiron 600m and I got the following error during the installation:
Setup cannot copy the file vga.dll.
Anyone know how to fix it? What happens if I choose to ignore the warning and install the Windows anyway?
View 2 Replies
View Related
Oct 17, 2005
Had to reformat my drive and now whenever i use my win xp sp2 install disc...i first format the drive and create the proper partition..the windows disc then starts copying files to the computer but at a point i get an error message saying that windows setup cannot copy the file...and it tells me which file. I redid this several times and each time at a some point in the copying it gives me this error...each time with a different file name
What should i do at this stage?
View 1 Replies
View Related
Aug 20, 2008
I've got a message popped up that says I need to install XP service pack 3.
I let it install, but it gets stcuk on the following error:
"Setup cannot copy the file wscsvc.dll"
It gives the path for the file as:
c:windowssystem32
I've checked in the path and the file definitely exists.
The message below the error says:
"Ensure that the location specifield below is correct, or change it and insert 'Windows XP System Files'in the drive you specify"
This message does not make much sense to me.
Is there a particular application running that could be stopping access to this file?
I've tried closing down all applications: but still no joy.
What am I doing wrong?
View 3 Replies
View Related
Dec 18, 2005
i am trying to install windows xp pro (sp2) on my new pc but i get this message:
"setup cannot copy the file: sprb0402.dll".
does anyone know what's going on?
hardw:
intel p4 3.0
msi intel 945p express chipset
2x1GB DDR 533 memory (dual channel mode enabled)
msi ati radeon x300HM 128mb
1x HD wd raptor
2x HD wd sata II
View 3 Replies
View Related
May 15, 2010
Computer: Winxp Pro SP2 4x256MB (1GB)(2 Hard Drive, 2 CD Drives)After virus recovery (from Rogue Antivirus) - The issues is we are missing games and some accessory (entertainment) programs.So - thought I'd reinstall them...
Trying to add (games) via Add/remove programs - Add "windows components"
Select accessories Prompts me to put in Win XP Pro cd Getting Copy Error " Setup cannot copy file XXX,XXX It prompts me to use files found in I386 directory. - I see the files it wants but unable to copy.
View 3 Replies
View Related
Apr 28, 2008
Got this error at 20% while copying the data and files.. it prompt me Setup cannot copy the file: kodak_dc.icm If you are installing from a CD, pls put the correct CD inside..the cd are original and it new, i have no problem repair last time..now got this error.?
View 6 Replies
View Related
Oct 29, 2005
My system is:
P4 3.8
1gig ram
MSI 925XE Neo board with Intel 925XE chipset
2 Maxtor 250gig hard drives in RAID 0 (stripped) (i think)
I seem to be missing vital files for the Intel 82801FR SATA RAID controller.
I run my recovery disk, press F6 to load the controller drivers and insert the floppy. I then choose the SCSI adaptor from the list (82801FR). It then seems to load the file 'iaStor.sys'. After then pressing enter, setup loads some more files then gives me the option to delete the existing partition and then select the unpartitioned space. I then choose to format the partition using NTFS. Then it formats and shows this info;
c/partition 1 (new Raw) 478742 free space
478742 MB Disk 0 at Id 0 on bus 0 on iaStor (MBR)
Once the formatting is finished i recieve the message;
Set up cannot copy the file: iaStor.sys
To skip press esc
To quit press F3
When i skip the file it says;
Setup cannot copy the file: iaStor.inf
When i skip this it says;
Setup cannot copy the file: iaStor.cat
If i continue the installation, the pc blue screens when windows boots up.
I have mutiple floppies from various sources containing these files but none of them work.
These are the files i have on the floppies;
iastor - system file - 457kb
iaahci - security catalog - 8kb
iaahci - setup information - 3kb
iastor - security catalog - 8kb
iastor - setup information - 3kb
txtsetup.oem - OEM file
license
readme
These are the files i need but they just wont copy.
View 22 Replies
View Related
Sep 29, 2005
yes or no ?? the XP Pro computer is missing this file...Can the XP Home browseui.dll file replace the XP Pro browseui.dll file ?
View 2 Replies
View Related
Jun 13, 2006
I saw another thread on this issue, but it didn't quite fit, so I thought I'd get others opinions. This computer was built for me by a non-major vendor. I consider myself semi-computer literate, and feel comfortable with most work required inside my case. Let me start by saying that this issue happens most often when I've woken my computer up from sleep mode. I have made no major changes to the hardware or software recently. What I did do was move the computer, rather gently, 2100 miles to my new home in a new city. The PC is under warentee, but the original vendor is rather far away. I also noticed that the first time I booted the computer after the move, the computer made a funny noise. It sounded like something (either a fan of the HD) was spinning improperly. I immediately powered down my system and rebooted, and have not had the noise since.
The full message (sans text) reads:
DRIVER_IRQL_NOT_LESS_OR_EQUAL
*** STOP: 0x00000D1 (0x000000EC, 0x00000002, 0x00000001, 0xAE5A38D4)
*** HTTP.sys - Address AE5A38D4 base at AE592000, Datestamp 41672744)
Begining dump physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance. I've also noticed that on the boot screen, my PC no longer seems to be doing a memory test, or showing my 3 gigs of memory. In windows, it appears the system sees the memory, but the memory test seems absent on boot. I have no problems, so far, running resource heavy programs. This seems, like I've said, to happen only when I sleep then wake up my PC. Rebooting from this screen will cause the PC to reboot itself constantly, but turning the PC off and rebooting seems to give me no errors, again, until I sleep it.
View 13 Replies
View Related
Jun 7, 2008
I have been reading up on getting a xp setup to work on a usb. On alot of websites it says to copy the i386 folder. On my setup cd i see that it has a amd64 folder. My computer is an amd so do i copy the amd64 instead of the i386? Is the i386 only for intel and amd64 for amd?
View 1 Replies
View Related
Jun 10, 2006
im now having some problem on my windows and would like to make a clean install but everytime it gets to 9%,it stucks. the file it is trying to copy is the msimsg.dll. i need to reset the computer to get rid of it.
View 12 Replies
View Related
Oct 21, 2002
When booting from an old Windows 98 bootdisk to install Windows XP (with slipstreamed SP1) I allways got this message: "Setup was unable to copy cdrom.sys".The problem was known at Microsoft (knowledge base) and they even got a solution for it (dude!).In the config.sys on your disk there will be a line somewhat like this: "device= /d:cdrom" simply change the cdrom to something else like : "device=..... /d:DVDRAM" and it will work.
View 9 Replies
View Related
Aug 21, 2009
I have a HP laptop that once ran on Vista. This summer before I left for college,I decided that it was finally time to downgrade to XP,seeing as I had backed up everything, and classes would be starting in a week.So I did the usual thing. Insert CD, restart computer,"A problem has been detected, and Windows has shut down...."Blue Screen of Death. The Stop Message: 0x0000007B (0xF78D254, 0x00000034,0x00000000,0x00000000)
View 7 Replies
View Related
Aug 23, 2006
During the initial Windows XP setup, is it possible to copy the files from the CDROM to the HDD and then continue installation from the HDD? I have seen this done with Windows 98 via the command prompt, assuming it can be done with XP aswell, but after looking through Microsoft.com for 5 minutes I gave up searching
View 8 Replies
View Related
May 29, 2006
I'm in the process of repair/recovery of my machine (Dell Inspiron 8500 with Windows XP Home, Service Pack 2). I'm following exactly the instructions in:
http://attachments.techguy.org/attac...chmentid=62075, but a problem has developed. The "software" file (which is the file that the original blue screen error message says is "corrupt, absent or not writable") will not copy to the new tmp directory to create the backup. My understanding from the article is that this backup file (software.bak) will later be used to restore correct settings for various software applications. Since I can't copy it, it appears that I am screwed,
View 1 Replies
View Related
Apr 20, 2010
What I want to do is create a .bat that will copy a file to several locations(all within the same folder, however with different names).
I have a folder that contains the master copy of my db and I want to run the batch file to update the users db files. The reason being is they each use thier own front end.
View 2 Replies
View Related
Aug 27, 2005
I usually backup my weeks work on Friday afternoons. What I do is run a "search" for all files created or modified within the last 7 days and then "copy" all relevant files to a folder on an external hard drive, and then burn a CD.
Everynow and then, I get the following message. "Cannot Copy File: Cannot Read From the Source File or Disk"
View 1 Replies
View Related
Oct 24, 2006
I do get the error-message, "while trying to finish a dowloald and after it reached 100% and tries to write the file on the harddrive"
cannot copy file: Cannot read from the source file or disk
View 2 Replies
View Related
Nov 30, 2006
I have a prob
Laptop P4 running XP Pro
Can't load Office XP because I get an error missing setup.ini file.
Ran a spyware but no help.
Any suggestions??
View 14 Replies
View Related
Jan 17, 2006
Can someone please tell me how to copy and save a ADOBE PDF file?
View 8 Replies
View Related
Oct 17, 2007
In trying to copy a set of files that look to be in ascending sort order from a hard disk directory to a USB thumb drive, XP copies the last few, then starts at the beginning down to where it started. Eg. if in order as 01,02,03,04, 23,24 , XP will copy 23, 24, then 01,02,03 etc. until all the files are copied. This screws up any opportunity of getting these files in sequential order on the USB device. I tried copying this way, deleting the out of order ones and copying the rest in sequence only to have XP do the same thing. This file copy method must be a way of efficiently copying files but it sure messes up the order of files on the USB device.
View 10 Replies
View Related
Apr 25, 2007
i just booted my pc, went regularly until it was launched and the desktop was loaded. Everything was running slowly, i press ctrl - alt - delete and wait 5 minutes for it to eventually come up, i then went to the processes tab and find that svchost.exe is running at 99% CPU I usually end process on that svchost, but then i cant connect to certain servers, and sometimes my sound drivers disappear also(not 100% sure, but this seems to be connected
View 3 Replies
View Related
Aug 30, 2005
Lately I have problems with my notebook lagging, very slow and I have broadband. Also after I'm on the internet about an hour I'm booted off.
View 6 Replies
View Related
Jan 22, 2005
I am using Windows XP Professional, service pack 1 is installed. A few days ago the PC would not boot up. I had to reinstall Win XP Pro. All my programs had to be reinstalled because Windows did not acknowledge they were there. All 23 of them work fine. Here's where I ran into a problem. I use a Matrox G200 Quad card with TV Tuner. I downloaded and installed the software for the card and that too is fine. When I download the software for the TV part of the card to work, I double click on the unzipped set up file and it starts working, that gets to the part where it says "Preparing to Install" then it just disappears. It worked before the reinstall of windows.How can i figure it out.
View 2 Replies
View Related
Sep 29, 2006
Is there any way to extract a setup file to see its contents.?
View 4 Replies
View Related
Apr 17, 2010
was Having music on it and wants it back. I hooked her HDD to my system using a USB2.0 box and have no problem accessing the drive or copying pictures to my system. If I try to copy music, I get Access Denied. I have file sharing enabled, have unchecked 'read only' in her files and still get the same message. I thought it might have something to do with them being iTunes, but I have tried Sound Taxi, Imgburn and a few others to copy or convert them and I get the same message.
View 20 Replies
View Related
Aug 12, 2009
I have been trying to install sp2 on xp home after a re-installation.I keep getting to the message cannot copy file fxssvc.exe
View 5 Replies
View Related
