I'm trying to install UPnP on my system but I get this error message. The dll file IS there. I have tried downloading the file from the internet and Browsing to it on the desktop but it always gives this error message.
I reecently installed Vista on my computer to try it out and after a few weeks wanted to change back to XP Pro as has some things i did not like.
Here's what i did:
1. I booted into BIOS and changed the bootup to cd/dvd. 2. Booted with my Original CP PRO cd (Not bought with my computer bought after). 3. followed the instructions and deleted the partition on C and formatted (Full not Quick) the C: drive with NTFS.
It gets to the stage that the SETUP is copying files and after 43% and says it cannot copy file WOWEB.exe and to press Esc to skip, F3 to QUIT and ENTER to try again.
It does this with a whole lot of files (Over 30) then after skipping thise files it reboots and gets the BLUE SCREEN OF DEATH!!!.
I have 2 DVD drives and tried both with the same result. I tried a differant Windows XP disk with the same results.
The motherboard has a backup facility which i had backed up previously with XP but not fully and can restore to that point but i want a complete reinstall.
I have formatted and installed windows XP with that disc loads of times without any problems before.
Had to reformat my drive and now whenever i use my win xp sp2 install disc...i first format the drive and create the proper partition..the windows disc then starts copying files to the computer but at a point i get an error message saying that windows setup cannot copy the file...and it tells me which file. I redid this several times and each time at a some point in the copying it gives me this error...each time with a different file name What should i do at this stage?
Computer: Winxp Pro SP2 4x256MB (1GB)(2 Hard Drive, 2 CD Drives)After virus recovery (from Rogue Antivirus) - The issues is we are missing games and some accessory (entertainment) programs.So - thought I'd reinstall them... Trying to add (games) via Add/remove programs - Add "windows components" Select accessories Prompts me to put in Win XP Pro cd Getting Copy Error " Setup cannot copy file XXX,XXX It prompts me to use files found in I386 directory. - I see the files it wants but unable to copy.
My mainboard is an Asrock AOD790GX/128MI am trying to set up a fresh install of windows XP pro SP3 on a single hard drive.I don’t want the RAID feature just the AHCI.I have set OnChip “SATA Operation Mode” option to AHCI and connected my HD to the SATA1 port and my DVD drive to SATA4 port.I have made a floppy disc with the AHCI driver “AMD AHCI Compatible RAID Controller- x86 platform” for xp from the included mainboard CD. The only driver present although I don’t need RAID I have booted my computer with my windows XP CD in. Then pressed F6 when prompted. I then put my floppy disc in with the driver on and press "S" I then select "AMD AHCI Compatible RAID Controller-x86 platform" and press enter.
Got this error at 20% while copying the data and files.. it prompt me Setup cannot copy the file: kodak_dc.icm If you are installing from a CD, pls put the correct CD inside..the cd are original and it new, i have no problem repair last time..now got this error.?
P4 3.8 1gig ram MSI 925XE Neo board with Intel 925XE chipset 2 Maxtor 250gig hard drives in RAID 0 (stripped) (i think)
I seem to be missing vital files for the Intel 82801FR SATA RAID controller. I run my recovery disk, press F6 to load the controller drivers and insert the floppy. I then choose the SCSI adaptor from the list (82801FR). It then seems to load the file 'iaStor.sys'. After then pressing enter, setup loads some more files then gives me the option to delete the existing partition and then select the unpartitioned space. I then choose to format the partition using NTFS. Then it formats and shows this info;
c/partition 1 (new Raw) 478742 free space 478742 MB Disk 0 at Id 0 on bus 0 on iaStor (MBR)
Once the formatting is finished i recieve the message;
Set up cannot copy the file: iaStor.sys To skip press esc To quit press F3
When i skip the file it says; Setup cannot copy the file: iaStor.inf When i skip this it says; Setup cannot copy the file: iaStor.cat
If i continue the installation, the pc blue screens when windows boots up.
I have mutiple floppies from various sources containing these files but none of them work.
I have been reading up on getting a xp setup to work on a usb. On alot of websites it says to copy the i386 folder. On my setup cd i see that it has a amd64 folder. My computer is an amd so do i copy the amd64 instead of the i386? Is the i386 only for intel and amd64 for amd?
im now having some problem on my windows and would like to make a clean install but everytime it gets to 9%,it stucks. the file it is trying to copy is the msimsg.dll. i need to reset the computer to get rid of it.
When booting from an old Windows 98 bootdisk to install Windows XP (with slipstreamed SP1) I allways got this message: "Setup was unable to copy cdrom.sys".The problem was known at Microsoft (knowledge base) and they even got a solution for it (dude!).In the config.sys on your disk there will be a line somewhat like this: "device= /d:cdrom" simply change the cdrom to something else like : "device=..... /d:DVDRAM" and it will work.
I have a HP laptop that once ran on Vista. This summer before I left for college,I decided that it was finally time to downgrade to XP,seeing as I had backed up everything, and classes would be starting in a week.So I did the usual thing. Insert CD, restart computer,"A problem has been detected, and Windows has shut down...."Blue Screen of Death. The Stop Message: 0x0000007B (0xF78D254, 0x00000034,0x00000000,0x00000000)
During the initial Windows XP setup, is it possible to copy the files from the CDROM to the HDD and then continue installation from the HDD? I have seen this done with Windows 98 via the command prompt, assuming it can be done with XP aswell, but after looking through Microsoft.com for 5 minutes I gave up searching
I'm in the process of repair/recovery of my machine (Dell Inspiron 8500 with Windows XP Home, Service Pack 2). I'm following exactly the instructions in:
http://attachments.techguy.org/attac...chmentid=62075, but a problem has developed. The "software" file (which is the file that the original blue screen error message says is "corrupt, absent or not writable") will not copy to the new tmp directory to create the backup. My understanding from the article is that this backup file (software.bak) will later be used to restore correct settings for various software applications. Since I can't copy it, it appears that I am screwed,
What I want to do is create a .bat that will copy a file to several locations(all within the same folder, however with different names).
I have a folder that contains the master copy of my db and I want to run the batch file to update the users db files. The reason being is they each use thier own front end.
I usually backup my weeks work on Friday afternoons. What I do is run a "search" for all files created or modified within the last 7 days and then "copy" all relevant files to a folder on an external hard drive, and then burn a CD.
Everynow and then, I get the following message. "Cannot Copy File: Cannot Read From the Source File or Disk"
In trying to copy a set of files that look to be in ascending sort order from a hard disk directory to a USB thumb drive, XP copies the last few, then starts at the beginning down to where it started. Eg. if in order as 01,02,03,04, 23,24 , XP will copy 23, 24, then 01,02,03 etc. until all the files are copied. This screws up any opportunity of getting these files in sequential order on the USB device. I tried copying this way, deleting the out of order ones and copying the rest in sequence only to have XP do the same thing. This file copy method must be a way of efficiently copying files but it sure messes up the order of files on the USB device.
I am using Windows XP Professional, service pack 1 is installed. A few days ago the PC would not boot up. I had to reinstall Win XP Pro. All my programs had to be reinstalled because Windows did not acknowledge they were there. All 23 of them work fine. Here's where I ran into a problem. I use a Matrox G200 Quad card with TV Tuner. I downloaded and installed the software for the card and that too is fine. When I download the software for the TV part of the card to work, I double click on the unzipped set up file and it starts working, that gets to the part where it says "Preparing to Install" then it just disappears. It worked before the reinstall of windows.How can i figure it out.
was Having music on it and wants it back. I hooked her HDD to my system using a USB2.0 box and have no problem accessing the drive or copying pictures to my system. If I try to copy music, I get Access Denied. I have file sharing enabled, have unchecked 'read only' in her files and still get the same message. I thought it might have something to do with them being iTunes, but I have tried Sound Taxi, Imgburn and a few others to copy or convert them and I get the same message.
Using win xp pro. Sometimes when we try to boot up our dell says "Configuration file missing". After that it won't go any further. Is there a way that we can make a copy of our configuration file? How would we insert it when we saw that screen again?
I'm running Win XP Pro SP 3, I have a file that I periodically copy to several different computers on a LAN. The exact destinations of the file change occasionally and I want to minimize the amount of maintenance involved when there is a change. In the folder containing the file I have a shortcut to each of the destination drives. When one of the destination folders changes I update the shortcut in that folder. If I drag the file to each of the shortcuts using the right mouse button one of the options is to copy the file to the target of the shortcut, so one way to copy the file is to manually drag it to each shortcut. Is it possible to achieve similar functionality with a batch file? It is easy enough to write a batch file that copies the files to each destination by coding the destinations into the batch file but is it possible to use a batch file to copy the file to the target of each shortcut? I suspect that parsing the .lnk files is complex but I don't know if there is another way to do this.
I get this error when i launch a setup file <<16 Bit Windows Subsystem>> //Title\ <<C:WINDOWSSYSTEM32AUTOEXEC.NT.The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close to terminate the application'>> //Description\ and there is another button 'ignore' <<>> i tried both choices and neither of them worked
i think it's a compatibility issue but the problem is that i launched the same setup files b4 and they worked,,i have WINXP Pro SP2 and i think i've had this problem after i installed the SP2,,i right-clicked the setup file and i changed some of the compatibility options and it still doesn't work.
