During the initial Windows XP setup, is it possible to copy the files from the CDROM to the HDD and then continue installation from the HDD? I have seen this done with Windows 98 via the command prompt, assuming it can be done with XP aswell, but after looking through Microsoft.com for 5 minutes I gave up searching
View 8 Replies
When booting from an old Windows 98 bootdisk to install Windows XP (with slipstreamed SP1) I allways got this message: "Setup was unable to copy cdrom.sys".The problem was known at Microsoft (knowledge base) and they even got a solution for it (dude!).In the config.sys on your disk there will be a line somewhat like this: "device= /d:cdrom" simply change the cdrom to something else like : "device=..... /d:DVDRAM" and it will work.
View 9 Replies View RelatedI'm trying to install UPnP on my system but I get this error message. The
dll file IS there. I have tried downloading the file from the internet and
Browsing to it on the desktop but it always gives this error message.
Why can't Windows accept this file?
Got this error at 20% while copying the data and files.. it prompt me Setup cannot copy the file: kodak_dc.icm If you are installing from a CD, pls put the correct CD inside..the cd are original and it new, i have no problem repair last time..now got this error.?
View 6 Replies View RelatedI have a HP laptop that once ran on Vista. This summer before I left for college,I decided that it was finally time to downgrade to XP,seeing as I had backed up everything, and classes would be starting in a week.So I did the usual thing. Insert CD, restart computer,"A problem has been detected, and Windows has shut down...."Blue Screen of Death. The Stop Message: 0x0000007B (0xF78D254, 0x00000034,0x00000000,0x00000000)
View 7 Replies View RelatedWhen I restart the computer, it goes to a screen that gives me 2 options. Windows XP Home, which is what I use and Windows XP Professional Setup.I dont know how the Professional Setup got on there but it is always highlighted as the selection, so if I reboot and go away from the computer it goes into the Setup which doesnt work, and then I have to reboot again. I;ve never had this until recently, and need to know how to get rid of the Professional Setup one so I can just use regular XP. I've done a search for the setup so i could delete it but nothing came up.
View 7 Replies View RelatedLast year I purchased a copy of XP Professional on eBay. Prior to that, I purchased Windows 2000 Professional from Best Buy - it was a legal copy and I still have it.I wanted to upgrade/change to XP so I was hoping to get a less expensive purchase via eBay. Everything was fine with it until this week when I tried to download an upgrade to Windows Media Player 10. My licenses were out of wack and when I called Microsoft for support, they told me it was an OEM version and they didn't support those versions. I had no idea I purchased an OEM version. I want a legal copy of XP and don't want to have to reformat my harddrive. Since XP Professional is already on my computer, if I "re-buy" the op-sys, can I load it over this OEM version? Or do I have to reformat?
View 31 Replies View RelatedWindows was installed OEM and Windows XP Pro CD came with the laptop, now that the CD has been lost.
Can I use other copy of Microsoft Windows XP Professional to re-install Windows? (I still have the serial key number from the original OEM disk)
I get this cyclic redundancy check error when I try to copy files from a DVD-RW onto my hard drive. I burnt said DVD about two years ago using Cyberlink DVD Solution Power2Go. I get this error with mulitiple DVDs, but not all of them (I've got five and I get this error with only three). Also, I get the error with some files, but not others (on the same DVD). I really can't lose these files! My guess is they were burnt wrong, but I'm really not sure. Is there any way I can recover these files?
View 11 Replies View RelatedI am trying to install XP on my 2000 but it says: Windows XP Setup does not support upgrading from Microsoft Windows 2000 Professional to Microsoft Windows XP Professional.Setup cannot continue.Do i have to reformat my HD? Do i have to reinstall everything on my HD some stuff i dont have the cd any more.Like Office 2003.
View 12 Replies View RelatedMy operating System is windows xp reacently i reinstall my ms office 2007 after that when i try to open a word or exel file it shows "The setup error controller has encounterd a problam during install. pls review the log files for further information on the error".
View 12 Replies View RelatedI have downloaded Windows XP Home Edition Utility: Setup Disks for Floppy Boot Install from the MSDN download centre.I have run the executable WinXP_EN_Home_BF.exe and produced the 6 Startup floppy disks.When I boot my PC using the startup floppy disks I get the following error on disk #5 "Corrupt CDRom.sys"Where can I get a version that works error free?
View 8 Replies View RelatedI've setup Windows 2003 fax services on a W2K3 server and shared the device. I've tested faxing from Word on my PC and it works fine.However, when other users try to install the fax client, the setup hangs asking for the fx* setup files. I've tried different XPSP2 CDs, copying the files to a local directory, making sure that the users have local admin rights (and even domain admin rights) but to no avail. The files are already in the system32 directory so in theory the setup doesn't even need to copy them. Even if I delete them, it doesn't work.Our corporate SMS team reckons that there isn't any policy which could
cause the problem.
I reecently installed Vista on my computer to try it out and after a few weeks wanted to change back to XP Pro as has some things i did not like.
Here's what i did:
1. I booted into BIOS and changed the bootup to cd/dvd.
2. Booted with my Original CP PRO cd (Not bought with my computer bought after).
3. followed the instructions and deleted the partition on C and formatted (Full not Quick) the C: drive with NTFS.
It gets to the stage that the SETUP is copying files and after 43% and says it cannot copy file WOWEB.exe and to press Esc to skip, F3 to QUIT and ENTER to try again.
It does this with a whole lot of files (Over 30) then after skipping thise files it reboots and gets the BLUE SCREEN OF DEATH!!!.
I have 2 DVD drives and tried both with the same result. I tried a differant Windows XP disk with the same results.
The motherboard has a backup facility which i had backed up previously with XP but not fully and can restore to that point but i want a complete reinstall.
I have formatted and installed windows XP with that disc loads of times without any problems before.
what should i do?
I am reformatting and reinstalling Windows XP Home in my dell inspiron 600m and I got the following error during the installation:
Setup cannot copy the file vga.dll.
Anyone know how to fix it? What happens if I choose to ignore the warning and install the Windows anyway?
Had to reformat my drive and now whenever i use my win xp sp2 install disc...i first format the drive and create the proper partition..the windows disc then starts copying files to the computer but at a point i get an error message saying that windows setup cannot copy the file...and it tells me which file. I redid this several times and each time at a some point in the copying it gives me this error...each time with a different file name
What should i do at this stage?
I've got a message popped up that says I need to install XP service pack 3.
I let it install, but it gets stcuk on the following error:
"Setup cannot copy the file wscsvc.dll"
It gives the path for the file as:
c:windowssystem32
I've checked in the path and the file definitely exists.
The message below the error says:
"Ensure that the location specifield below is correct, or change it and insert 'Windows XP System Files'in the drive you specify"
This message does not make much sense to me.
Is there a particular application running that could be stopping access to this file?
I've tried closing down all applications: but still no joy.
What am I doing wrong?
i am trying to install windows xp pro (sp2) on my new pc but i get this message:
"setup cannot copy the file: sprb0402.dll".
does anyone know what's going on?
hardw:
intel p4 3.0
msi intel 945p express chipset
2x1GB DDR 533 memory (dual channel mode enabled)
msi ati radeon x300HM 128mb
1x HD wd raptor
2x HD wd sata II
I have been reading up on getting a xp setup to work on a usb. On alot of websites it says to copy the i386 folder. On my setup cd i see that it has a amd64 folder. My computer is an amd so do i copy the amd64 instead of the i386? Is the i386 only for intel and amd64 for amd?
View 1 Replies View Relatedim now having some problem on my windows and would like to make a clean install but everytime it gets to 9%,it stucks. the file it is trying to copy is the msimsg.dll. i need to reset the computer to get rid of it.
View 12 Replies View RelatedComputer: Winxp Pro SP2 4x256MB (1GB)(2 Hard Drive, 2 CD Drives)After virus recovery (from Rogue Antivirus) - The issues is we are missing games and some accessory (entertainment) programs.So - thought I'd reinstall them...
Trying to add (games) via Add/remove programs - Add "windows components"
Select accessories Prompts me to put in Win XP Pro cd Getting Copy Error " Setup cannot copy file XXX,XXX It prompts me to use files found in I386 directory. - I see the files it wants but unable to copy.
My mainboard is an Asrock AOD790GX/128MI am trying to set up a fresh install of windows XP pro SP3 on a single hard drive.I don’t want the RAID feature just the AHCI.I have set OnChip “SATA Operation Mode” option to AHCI and connected my HD to the SATA1 port and my DVD drive to SATA4 port.I have made a floppy disc with the AHCI driver “AMD AHCI Compatible RAID Controller- x86 platform” for xp from the included mainboard CD. The only driver present although I don’t need RAID I have booted my computer with my windows XP CD in. Then pressed F6 when prompted. I then put my floppy disc in with the driver on and press "S" I then select "AMD AHCI Compatible RAID Controller-x86 platform" and press enter.
View 2 Replies View Relatedi am trying to install windows office 2007 but after a minute from start of installation ,it popup dialog box saying setup can not find setup.exe file and say browse valid installation source and click ok.
I don't know whats happening.I have just formated my C drive and installed fresh copy of windows xp.
here is image of error message.
what should i do?
http://img101.imageshack.us/my.php?i...9005582dv8.jpg
okay guys i joined the real computor race, i just got a compaq, 512mb pentium 4/ 2.0 ghtz processor, and winxp professional installed with 40gb hard drive. so now i need to know (step bystep) how to get all the stuff i want off my dinosaur, hp celeron, 64mb, 6gb hd, and win98se, onto my new computer.
View 2 Replies View RelatedThe registry on one of my computers is corrupt and if I try to copy the files from the WindowsRepair folder using the windows system repair tool, I'm told the files cannot be found. One possible solution I thought of is using the registry files from my other computer running Windows XP. I don't even know if this is possible, but if it is, how can I transfer the files. I would put them on a CD but the CD drive won't open when the system repair tool is running, and they're too big to fit on a floppy disk, even one at a time (the system and software files are both over 2mb.)
View 4 Replies View RelatedSystemRoot/System32/Drivers/asc3550f Erro status was oxc000012f Windows 2000 Professional system I recently purchased this computer system ($50) for my Mother who simply does e-mail and games (not on line games). I had to remove malware at first (can't remember the name) and had to install msconfig as 2000 did not have this feature. Now upon booting up, a window pops up with the above message, however upon clicking on the small x to close the window, then computer boots up and she uses it. Nothing else happens. I decided to go into the WINN file and found a folder (drivers) and actually saw the little driver file "asc3559f" and was going to simply remove it by copying it to another folder, shutting down and trying to reboot but must admit, I chickendd out. She lives about 100 miles from me so I didn't want to cause trouble and left it alone and I am now beginning to think since it boots after closing the pop up window; leave well enough alone.
View 3 Replies View RelatedI am having trouble repairing windows it never finished the initial repair, it got to 9 minutes left and hung - and when I tried to restart another repair, the bootable xp disk never gave the option to repair again. The computer has XP sp1 on it and I have tried a SP1 XP and SP2 XP disks on it.
View 9 Replies View RelatedI have never helped anyone with windows 2000 or 2000 Pro before. When you start the computer it is a blue screen with txt and starts out saying a stop error
Stop:0x0000007B (0x81872030,0xc000014F,0x00000000,0x000000007 INACCESSIBLE_BOOT_DEVICE
Then it says ot run a virus scan and chk disk etc but I can't get into normal or safe mode to do that, when you press F8 to get into safemode it comes up and you press enter then the next screen for windows you press enter then it ends up back at the blue screen witht the error again.
When trying to install Windows XP Pro I get the following error message "Setupdd.sys cannot be loaded error 14. Setup can not continue. Press any key to exit."
Anybody have any ideas how to solve this?
On many occasions when I try to install various programs the Installshield wizard starts running and withing 1-2 seconds after the initial screen the program disappears with no errors or anything. I can never get the program or driver installed.
View 14 Replies View RelatedMy nieces were playing Hercules on their older genetic computer when the monitor screen flipped. Now everything is upside down. We tried rebooting and only the initial intel logo is displayed correctly for a couple of seconds and then the windows screen comes on upside down. Any ideas on how to fix this? As I mentioned, it's an older unit with Windows XP installed.
View 2 Replies View Related
