Error Shown When Copy Files From DVD-RW To Hard Disk
Feb 13, 2009
I get this cyclic redundancy check error when I try to copy files from a DVD-RW onto my hard drive. I burnt said DVD about two years ago using Cyberlink DVD Solution Power2Go. I get this error with mulitiple DVDs, but not all of them (I've got five and I get this error with only three). Also, I get the error with some files, but not others (on the same DVD). I really can't lose these files! My guess is they were burnt wrong, but I'm really not sure. Is there any way I can recover these files?
An external hard drive. When it is on & I try to boot,I get the following error : Invalid system disk Replace the disk, and then press any key I then have to turn off the external & press any key to get it to boot. Is there a way that I can boot with that external turned on. Some setting I need to change perhaps? I have an E-Machines computer about 2 years old.
I want to copy files from my hard drive to my dvd writer.InCD screws this up.I want to be able to open windows explorer and move/copy]selected files to a dvd. I then want to be able to read the files direct from the dvd using windows explorer.
OK, so I made sure my BIOS was booting from CDROM and first priority, and then HDD. I put the Windows XP Pro CD in and the little windows pop-up screen came up and I exited that and shut down my computer.I turn my computer back on and I cannot get ANYTHING on my monitor.I have two slots on the back of my eVGA 6800 PCI-E card.
I have created a Bart PE bootable XP cd. I can boot into windows using this CD I would like to know how to copy the data in my hard disk to pen drive or flash drive.
I have and Acer Netbook Aspire One A0A110. I'm trying to run Disk Defragmenter and an error pops up every time when i run it. The scan has been cancelled because an error occured in file :C:ACERPreloadCommandAlaunchXCoadeTracerCoadeTracer2008-11-26-28-39.log. I can't find out what is causing this. Acer sucks because they don't come w/software, but is avail for purchase.
Re-install windows xp. I boot from xp cd but only get as far as pressing f8 to accept the licensing agreement. The next page says that the installation cd cannot be read. I have used this cd in the past and it has worked ok.Do i just need to get hold of another copy of xp?
I have ms bundled on windows XP my hp pavilion 1335w. I have saved a lot of word processing documents for my new (3 mos.) job. Now when I try to re-open them for revisal, or even just to look at them, I get a msg in a small window that says "Works task launcher cannot open the file you selected. It may have been either moved or deleted." If I can't get to some of these, I will lose my job! And I don't even know where to go for help, this is the first place i've tried. Can someone either sove the problem, or tell me when I can go for the answer?
My computer says that my DVD and CD drivers are missing files and may be corrupt, i wonder if anyone knows how i can find thes files again or has any info that can help me.
I had bought several hard drives as is, hoping one of them would work. thought I had one, but turned out I couldn't install XP onto the disk, wouldn't copy any files. so I pretty much cut my loss on the drives and removed it the bad one from pc. now I get 2 options when booting windows. my original xp install, and the 2nd install that still needs to complete, how can I stop it from wanting to install xp again from the boot file and keep the original settings as they were?
I completely reinstalled my Win XP OS and i saved my "necessary" files(music, videos. etc...) to an external hard drive but i accidentally encrypted them and now i have to figure out how to decrypt them so i can copy them to my new OS.
When i try to just uncheck the "Encrypt contents to secure data" box i get the error
Recommend me a free program to basically copy files from windows to the portable hard drive? I don't need compression, and I don't want the entire backup in one file, like .zip or .bkf. Normally I would just copy the files over, but I would lose the timestamps and all the attributes.
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
Last week i installed windows XP Pro on my desktop. It has a 250GB hard drive which has 1 partition (C drive only), NTFS offcourse. I did not format it while installing windows as it has lots of stuff in it. There's over 50GB free and i�ve been removing a lot of stuff from the hard drive to make up some space but in windows i get an error message that i don't have enough disk space, the disk cleanup utility runs cant free up space and i can not install or copy anything in the hard drive. I've noticed that when i deleted some file holding (or not) the shift key the free size goes lower although the files are being deleted from the hard disk.
I always have errors reported on my hard drive, even after chkdsk /f and /f/r."Freespace marked as allocated in the volume bitmap". Why does it never go away? Windows XP Pro with all of the updates. Machine runs fine.
During the initial Windows XP setup, is it possible to copy the files from the CDROM to the HDD and then continue installation from the HDD? I have seen this done with Windows 98 via the command prompt, assuming it can be done with XP aswell, but after looking through Microsoft.com for 5 minutes I gave up searching
I was wondering if it was possible to install XP home edition on a harddrive with files already on it without much worry of destroying the files. I've always reformatted before, but I need to save my music.
I understand that it is possible to interrogate a hard disk to see files that have been deleted - and cleared form the deleted box - in other words they remain 'hidden' after deletion. Although I understand you cant do it at home where can I find a specialist company to do this? Location N London UK.
I was wondering if there was a way to transfer the Program Files folder to the second disk withouth messing up the start path of those programs, and still be able to access them in the Start menu.
I usually backup my weeks work on Friday afternoons. What I do is run a "search" for all files created or modified within the last 7 days and then "copy" all relevant files to a folder on an external hard drive, and then burn a CD.
Everynow and then, I get the following message. "Cannot Copy File: Cannot Read From the Source File or Disk"
I trying to help a friend with their computer; Dell Dimension 4700, XP Pro, and getting the error message: A DISK READ ERROR OCCURRED. PRESS CTRL & ALT & DEL Does this mean the hard drive is bad?
I have Win XP Pro SP2 I also have an external Lacie 250GB hard disk I want to store my Virtual PC files on. But, it is formatted at FAT32 and I can't put a file on there that is over 4GB. So, I tried to convert the drive to NTFS, but Windows won't let me do this. It keeps telling me the disk is dirty and to run chkdsk / f. Which I have done and completes fine finding no problems on the drive. Yet convert e: /fs:NTFS still does not convert the drive reporting it is dirty. What is causing this and how do I fix it? I have tons of data on the drive so I can't re-partition it as I don't want to loose that data. I need to convert it to NTFS.
hey good fellows out there. it seems the problem has struck again.
this is a error message: Error code 0000007a, parameter1 c03dcf3c, parameter2 c000000e, parameter3 f73cf642, parameter4 22808860.
started up then there was the error reporting to settle, so it's a hard disk error, but what exactly is still not known. here's what i was doing just BEFORE this error occured.
When I was reconnecting my hard drive, I mistakenly put the jumper in the wrong position and limited the HD capacity to ~30 gigs, so a lot of files went missing and some programs malfunctioned. Then when I figured this out and put it back in the right position, the system wouldn't boot up because"ntoskrnl.exe is missing or corrupted".
I'm trying to install UPnP on my system but I get this error message. The dll file IS there. I have tried downloading the file from the internet and Browsing to it on the desktop but it always gives this error message.
I tried to install Ubuntu onto my HD yesterday, and i ran into an issue during the install (i received a message that said the optical disk or hard drive had an error and that the instal would be aborted). So the Ubuntu install was aborted, and i tried to boot back into windows but received this message:
Quote: Load needed for kerenl:
ntoskrnl.dll
hal.dll
kdcom.dll I have tried to boot into safe mood with no luck. So i tried to do a repair from the XP disk i have, but then i received this error message:
a friend asked me to install a new hard drive for him because his crashed. So i purchased a new hard drive (maxtor 60 gb) set out to partition and format the drive, using a win 98 boot disk. I partitoned the drive ( for large volume drive.) Formatted the drive ( format c: /s ) to include system files.and proceeded with Os install Windows 2000. Everything went as smooth as silk... the when install finished, I was prompted to remove the disk from cd rom and complete installation with the onscreen prompt. I removed disk, clicked finish and the computer rebooted upon loading, when it went to start windows it said DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
I put the Win 2K disc back in and hit enter. It started windows perfectly no errors at all... then I took disk out re-started ( to check system stability) and back to the same error message: DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. I of course freaked out, I feel like an idiot cause I cant get this thing to work right. tried reformatting without the sytem files, re-partioning tried win 98, winXP, nothing same stuff! So I talked to a pal got a hard drive wipe program off the net "killdisk", wiped the drive and tried to reinstall Win 2K, same problem.
I am having an issue with a Maxtor Model Number 92739U6 hard drive. I have just finished formatting and installing windows xp home edition. Everything was going ok until I restarted the computer. First right after I restarted the computer I got an error message A Disk Read Error Occurred. Press CTRL+ALT+Del. I was unsure what caused this error message so I started to research this issue on Maxtor?s website and they advised me to use fdisk /mbr to repair the error. I did that and restarted the computer. Same Error?. The thing I can?t figure out is why I am able to boot right to windows using a boot disk.
I have a P4 HT (old one) I formatted its hard disk using another comp to install a fresh copy of WinXP but the bootable XP is unable to start as there is a "GRUB" message that is last shown and then nothing happens.I have only 1 drive attached to this comp which is this one.it is running in a slave mode(doesn't matter as its the only default drive for the motherboard to read, and i have lost my jumper pin so thats y it is running in a slave mode.)What shd i do abt this "GRUB" message and how shd i go about installing WinXP ?
If I want to attach second hard disk with the same configuration of master hard disk, then system doesn't show second hard disk altogether or new hard disk begin to malfunction. Such as suddenly begin to give sounds like TICK, TICK TICK. Suddenly vanishes from the 'MY COMPUTER' drives. Suddenly denies to copy paste functions. BIOS shows both SATA drives. But Win XP doesn't load or simply hangs while starting up [booting up]. It happens when I attach second SATA drive with system. If only one SATA is attached, then WIN XP boots normally.
