ReInstalled Win And Cannot Copy Files From External Hard Drive?
Nov 29, 2009
I completely reinstalled my Win XP OS and i saved my "necessary" files(music, videos. etc...) to an external hard drive but i accidentally encrypted them and now i have to figure out how to decrypt them so i can copy them to my new OS.
When i try to just uncheck the "Encrypt contents to secure data" box i get the error
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
I have a file folder that is 247 MB on XP that I'm trying to copy to my external Passport Hard drive. I've been able to copy all files to the external except this one, but every time I try it elicits an Error Copying File or Folder ie. "Cannot Copy File". What's up with that?
I wish to copy my laptop HD (all apps., programs etc.) to an external HD then replace the laptop hd with the external HD for upgrade purposes (80gb to 160gb). I'm seeking the best method for doing this. I've tried using the Microsoft feature ntbackup.exe
I have an IDE drive housed in an external USB enclosure. When I connect it to my XP Pro (SP2) desktop it is recognised, and I can browse the folders and files. However when I try to copy a large number of files from the drive to a local hard drive on the desktop I get a "resource no longer available" error, and the external drive is no longer visible to the PC. I can then disconnect and reconnect the drive but only get back into the same loop.
My computer seems to work fine except when I try to do a copy in Casper XP to backup my hard drive to external HD. I also got this stop code last night when trying to do a disk check to correct errors. Stop 0X0000000A (0X00000188, 0X000000FF, 0X00000000, 0X804E35E9). I have located online page for stop 0X0000000A codes which states could be driver problem... that last one parimeter 4 -- 804E35E9 how/where would I find out which/if this is associated to a particular driver so I can possibly correct it?
I am really annoyed cause I can't delete most of the files on my external hard drive, nor can I format it. I tried using this program that has always successfully deleted files off of my C and F drives. It seems there is no way to delete these files.
I bought a DELL labtop Inspiron 5052 over two years ago. It got XP Home version. A couple of weeks ago, a cup of coffee was spilled on my laptop. I took it to a computer shop. They contacted Dell and tried to order the labtop motherboard but to no avail as Dell has discontinued manufacturing this type. The warranty is only 1 year. So I decided to use it for spare parts. What 's an expensive cup of coffee ($3500.00). After removing the hard drive (60Gb) from the labtop, I made it as an external USB type hard drive. It was a perfect solution as at least I can save the data. But the fun was a short one as I now experience something to do with 'file access'. Connecting the external hard drive to my PC, I can see all the files and folders on it. The problem is on my Dell laptop I have 2 users setup under Document and Setting. One of the user logon (userA) enforces password while the the other (userB) enfoces no password for logging on. I can open files from userB with no problem but can not open files or folders from userA. It says "Access denied" or "file inaccessible". Is there a way to overcome this ?
I just bought a Hitachi Deskstar 160 gb external hard drive to back up my system hard drive on my pc. I tried using the copy & paste commands from explorer, but the ext hard drive wouldn't allow this. What do I need to do to get this done?
I did MS Outlook 2003 full backup to an external hard drive just before my computer died and I want to transfer my e-mail files from the external hard drive to my laptop circa 2006.
I want to back up my files to an external hard drive using Windows Backup, but it is not shown as an option. The only options shown are the floppy and f: drives. Can you use this program to back up to an external drive? If so, how do you tell it where to send the data?
I'm helping a friend whose system went belly up after a power failure. Besides telling him to get a surge protector, we are going to reload Windows and everything else. I pulled his hard drive and put it in an external enclosure so that we can collect his data files on another system. When I try to copy his files Windows tells me "access denied". What do I need to do to have access to copy these files?
Recommend me a free program to basically copy files from windows to the portable hard drive? I don't need compression, and I don't want the entire backup in one file, like .zip or .bkf. Normally I would just copy the files over, but I would lose the timestamps and all the attributes.
In case you have read my other post(s), I am trying to sort out multiple problems (one related to Windows 7 and one related to XP).
laptop running XP SP3 (32-bit). Just before I take the big step (of doing a fresh install) I made a image on the D: partition with Norton Ghost 12. All went well. Now just in case murphy strikes, I tried to copy the image folder (created by NG12) to my external USB drive
I am tried to copy some files from this laptop to my old external hard drive. When I tried to do this I got a message stating "Cannot copy file: Access is Denied. Make sure file is not write protected or in use".
I am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
I've connected an external USB drive, but when I go to My Computer it shows it as a network drive. In addition, it gives it the same name as the mapped network drive that already exists there. When I change the name of the external drive there, it then changes the name of the mapped network drive, so again they both have the same name, although the drive letters are different. Any ideas how to make the external drive appear where it belongs in My Computer, under Hard Disk drives?
I turned the PC off to reboot when I though I was going into safe mode and went into regular mode instead. Now, it thinks one of my external drives is the C drive. On boot, I am getting a message that it cannot recognize find the system 32 windows config file (I'm paraphrasing).
I used the repair utility to get to the C prompt (which is pointed at the external drive) and checked the drive letters. I don't think the PC bios knows the hard drive is there.
I tried going into setup and reverting to factory installed configuration and that didn't change anything. I could not get it to recognize the hard drive.
I have a usb external hard drive. Can I install windows os on this drive and use it.I am told that windows must be installed only on main hard drive 9i.e. drive 0).
Recently, my motherboard fired, but the Hard drive was uneffected. Since i had a lot of info on the hard drive i tryed to find people who could take the info off the hard drive for me. I then had this great idea of just putting my hard drive into a "Hard Drive Enclosure Kit". Well, i did that and it worked great. But theres one problem, I can't seem to get into the Owner folder of the hard drive, for evey time i do, it brings up.
I just recently purchased a 100 Gb laptop hard drive together with an outer case and a USB cable. I just wanted to upgrade my laptop's hard disk, by first making an image of my current drive into my new one through the outer casing. The thing is when I connect it to my laptop, windows cannot detect it. Whats wrong with it? Is there anything I have to do?
I recently helped someone save the documents off of their computer after it crashed (it was missing a Windows file. I tried the repair command and it wouldn't work, so I decided to save the files and reformat the hard drive).I plugged the hard drive into a working computer and pulled all the documents off of it (VERY slowly) onto an external hard drive.
Every once in awhile I wouldn't be able to pull a picture or document off because of a cyclic redundancy check error. I just moved on and saved what I could. I assumed it was because the hard drive was already bad so I just moved what I could.
When installing a larger main drive, how do I get the drivers copied onto the slave before I take out the main one I wonder is there a simple way of doing this, I am using Windows XP home edition, the PC is an oldish one and isn't any specific make, so I can't get any clever programs from the manufacturers site
My problem is that I am trying to use a 60 GB ATA / 133 Maxtor DiamondMax Plus 9 Internal Hard Drive as an External Drive as a Slave and I am having trouble getting my bios to recognize it.The Hard Drive is hooked up in the same way as an Internal SATA DVD burner setup as an External DVD Burner that is running on Windows Office XP 2003 and it works fine. So what suggestion would you give me so that I maybe able to get the bios to recognize this drive?
Found some very useful info on here so decided to sign up and post a recent problem i encountered with an external hard drive. the hard drive has a capacity of 80GB and came from another pc. there was a 25/55 partition already on it from the old pc. i tried to delete the partition that was 25gb. now i can't find that 25gb at all. when i plug it in to the usb slot i can only see the 55gb partition it used to appear as 2 hard drives in my computer and nothing else. when i use disc management to format it i only see 55gb.
To anyone that might be able to help... I've had this external hard drive for a long time and I haven't been able to access it to store lots of music and videos on. My computer sees that it is there, but like I had said earlier, I can't use it. It won't let me see it unless I go to Device Manager. My computer is getting old on me and it's been places most labtops shouldn't have gone... Once in Purgatory, and now, it's on Hell's surface. I get the safely remove hardware icon down by my clock, but I don't want to remove it, I want to use it. I want it to show up in my drives so I can instantly see how much space I have left and what not... I went through the Troubleshooter, tried every possible way that I can think of, the ways the troubleshooter.
I have a Sony VAIO desktop running Windows XP. I purchased a Comstar 160MB External USB2 Hard-Drive and installed it. Since Windows XP is supposed to have the drivers that are necessary, no driver disk was included, and none was needed.The problem developed when my Windows XP began to give me problems later. I had to re-install Windows XP. I did that, and I downloaded all Windows XP up dates (including Service Pack 2). Now, this Windows installation does not install the external hard-drive. Windows recognizes that there is "a USB2 device," but Windows states that there are no drivers and asks me to furnish them.