In case you have read my other post(s), I am trying to sort out multiple problems (one related to Windows 7 and one related to XP).
laptop running XP SP3 (32-bit). Just before I take the big step (of doing a fresh install) I made a image on the D: partition with Norton Ghost 12. All went well. Now just in case murphy strikes, I tried to copy the image folder (created by NG12) to my external USB drive
I have a file folder that is 247 MB on XP that I'm trying to copy to my external Passport Hard drive. I've been able to copy all files to the external except this one, but every time I try it elicits an Error Copying File or Folder ie. "Cannot Copy File". What's up with that?
View 1 Replies View RelatedI am tried to copy some files from this laptop to my old external hard drive. When I tried to do this I got a message stating "Cannot copy file: Access is Denied. Make sure file is not write protected or in use".
View 2 Replies View RelatedI wish to copy my laptop HD (all apps., programs etc.) to an external HD then replace the laptop hd with the external HD for upgrade purposes (80gb to 160gb). I'm seeking the best method for doing this. I've tried using the Microsoft feature ntbackup.exe
View 4 Replies View RelatedI completely reinstalled my Win XP OS and i saved my "necessary" files(music, videos. etc...) to an external hard drive but i accidentally encrypted them and now i have to figure out how to decrypt them so i can copy them to my new OS.
When i try to just uncheck the "Encrypt contents to secure data" box i get the error
I have an IDE drive housed in an external USB enclosure. When I connect it to my XP Pro (SP2) desktop it is recognised, and I can browse the folders and files. However when I try to copy a large number of files from the drive to a local hard drive on the desktop I get a "resource no longer available" error, and the external drive is no longer visible to the PC. I can then disconnect and reconnect the drive but only get back into the same loop.
View 14 Replies View RelatedMy computer seems to work fine except when I try to do a copy in Casper XP to backup my hard drive to external HD. I also got this stop code last night when trying to do a disk check to correct errors. Stop 0X0000000A (0X00000188, 0X000000FF, 0X00000000, 0X804E35E9). I have located online page for stop 0X0000000A codes which states could be driver problem... that last one parimeter 4 -- 804E35E9 how/where would I
find out which/if this is associated to a particular driver so I can possibly correct it?
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
View 1 Replies View RelatedI'm helping a friend whose system went belly up after a power failure. Besides telling him to get a surge protector, we are going to reload Windows and everything else. I pulled his hard drive and put it in an external enclosure so that we can collect his data files on another system. When I try to copy his files Windows tells me "access denied". What do I need to do to have access to copy these files?
View 4 Replies View RelatedI'm looking ahead to the time when an attempt to do an Acronis Create Image will not be possible because there is not enough room on my external hard drive. Presently, I run a fresh Create Image monthly and now have three versions on my external drive. I can probably store a total of 5-6 before I run out of space.
Do you know what will happen when I attempt to run a Create Image and find that there is not enough room for another file?
And, does Acronis then give me a way to delete the oldest file from the E drive, or must I use some other facility, such as clicking on the oldest and selecting 'delete this file' from the selections in the vertical window on the left of the screen?
I recently purchased a 160 GB SimpleTech SimpleDrive (external-USB) for backup purposes. The enclosed software StorageSync (Pro) did a satisfactory job of backing up, although a little slow (1 hr - 40 min for 11.5 GB, no compression).
Neither the on-line manual or website gives information whether a restore is possible from a catastrophic-type incident of the O/S, requiring restoration from a bootup procedure. There's no instruction about preparing a "Recovery CD." I have Ghost 9.0; would this be more advisable to backup the image file; and would Ghost see the external HD from its Recovery CD?
I bought a new HDD for my Laptop and I need to image copy my old HDD to the new one. I want to do image copy so I don't have to install everything again.
My Laptop doesn't have a floppy drive, but it does have USB2.
How can I do the Image copy?
quality of AcomData External HD? Also, is this a well established company? Any info as to how this brand compares to a Seagate External HD?
View 5 Replies View RelatedWhen I try to copy an image from a web page to My Documents folder it saves it as .ART and my WinXP cannot read it. How can I copy this successfully?
View 3 Replies View RelatedI have a problem with understanding the differences between these words (actions), when I use Retrospect,( a backup program,) I cannot read any files since the backup file turns into a huge something. When I backup, I mean I copy my files from one drive to an external drive and I can always restore them or copy them to another computer. These are for my files.
When I want to re-install a program, I take the original disk or the zip file I downloaded, stored on CD or another external hard drive.
I am trying to make a copy of an error message I get so that I can insert this image onto my posting. Using Windows XP home how can I do this ?
View 8 Replies View RelatedI am trying to create a full HD image of my Dell c800 Laptop using Drive Image 7 (circa 2003) to an USB HD. I have tried twice and received failures about my HD having bad sectors OR locked sectors. I ran check disc with repair and did not find any problems. Re-ran check disc from the boot disc that came with the application and found no problems with the disc. Tried again for a backup and received the same error. I am thinking it is one of the programs I have loaded has a locked sector or one of my processes that loads during boot is the problem?
View 14 Replies View RelatedAfter working for sometime with Maxtor One Touch II external drive, I have experienced the following problem: If the computer is left for some period of inactivity, for 1-2 or more hours (the light on the drive is on and not blinking) I cannot access the drive and the OS message is "One touch is not responding". The only remedy is to restart the computer. My System consists of: WindowsXP SP2 and 512 MB Ram The Maxtor OneTouch II drive is connected via a firewire inlet of the computer, the file system being NTFS. The drive is partitioned unto 2 logical drives (~150 GB each)
View 3 Replies View RelatedI have Dell XPS w 2 hard drives. the master is 80gb(NTFS).."C" drive, and the slave is 120gb(FAT32)...."F" drivethe other day, after a re-start, Windows gave me the not so friendly message "Checking file system on F...the volume is dirty...windows is verifying files and folders.......0 percent complete"now, the problem is that it took 30 HOURS! before it completed its checkup! well, so before i panicked too much, i decided to buy an external drive to back up some stuff from the slave drive. after backing up about 20 gb worth of stuff, i re-started, and it did the same thing! tho this time it took "only" 18 HOURS to do its checking! it did say that "windows replaced bad clusters in files"
View 2 Replies View Relatedi connected my external HDD to my system i copied some data but now i'm not able to open that drive i have partitioned the 160GB drive to 8 20GB drives bcoz i have very important data in that drive
View 9 Replies View RelatedI've connected an external USB drive, but when I go to My Computer it shows it as a network drive. In addition, it gives it the same name as the mapped network drive that already exists there. When I change the name of the external drive there, it then changes the name of the mapped network drive, so again they both have the same name, although the drive letters are different. Any ideas how to make the external drive appear where it belongs in My Computer, under Hard Disk drives?
View 8 Replies View RelatedI turned the PC off to reboot when I though I was going into safe mode and went into regular mode instead. Now, it thinks one of my external drives is the C drive. On boot, I am getting a message that it cannot recognize find the system 32 windows config file (I'm paraphrasing).
I used the repair utility to get to the C prompt (which is pointed at the external drive) and checked the drive letters. I don't think the PC bios knows the hard drive is there.
I tried going into setup and reverting to factory installed configuration and that didn't change anything. I could not get it to recognize the hard drive.
I installed an a 2.5 Toshiba notebook drive in a external enclosure and I can't get XP to recognize it. The drive spins up and the light comes on to indicate it is running but nothing is shown in device manager or My computer. It also is not shown in disk management.I have uninstalled the the USB drivers through the device manager with no change after rebooting. The USB ports work fine with my other external drive.The drive was working fine in a notebook that had a
cracked screen. It is formated in NTFS. What else should I be looking at to solve this problem?
My sis has one of those Wally-Mart Acer mini laptops; NO CD-ROM drive in it (PS: way-bad idea! Never buy a computer w/o a dvd/cd drive in it!). She managed to delete the graphics card driver and so when that occurred and rebooted, nothing on-screen! Its there, you just cannot see anything in windows! And, because there is no drive, the CD with all the original programs cannot be run in start-up mode without an external CD-ROM drive
I want to use my (HP Pavilion zv6000 w/XP) laptop as that external drive to re-load her original CD, which (of course) has all the drives on it! At start-up, the Acer (also w/XP) has an option to start-up from an ext. drive, so it has that capability (obviously, w/o a drive of its own), but how to make my HP "look" like an external drive (via USB-to-USB hookup) is the problem!
When installing a larger main drive, how do I get the drivers copied onto the slave before I take out the main one I wonder is there a simple way of doing this, I am using Windows XP home edition, the PC is an oldish one and isn't any specific make, so I can't get any clever programs from the manufacturers site
View 3 Replies View RelatedThis is really a question more than a problem. I'm running a PC with 2 HDs. I am changing the boot drive C: for a larger disk. Now ordinarily I would use a backup program like Ghost or whatever. Now my situation is slightly different in that most of my startup programs are installed on my second HD E:, the C: drive being the boot drive with XP installed.
What my intention is. Is to take out drive E: Then replace that with my new drive. Then I was going to boot in Safe Mode and use the Windows Files & Transfer wizard to copy the C: drive to The new drive. The last thing to do then is swap the C: with the newly installed drive and replace the original E: drive. I hope that all makes sense.
how to create a image of c drive .. and restore c drive when system crashes? so that no need load operationg system and system drivers.... as well as softwares.
View 2 Replies View RelatedIf you get another hard drive cause yours is almost full and there fore messing with the virtual.memory. If you get an external harddrive is it better to move the pagefile to the new hard drive which is what I was going to do change the drive for the virtual memory, then I got thinking, in case you didn't use the external drive all the time hooked up for whatever reason they you wouldn't have a pagefile on the old one does that make sense? I thought maybe it would be better just to move a bunch of pics and music to the extenal drive and leave the virtual memory (pagefile) where it is on the old drive, or would it make any difference??
View 4 Replies View Relatedi have WD elements 160gb external drive, when i connect it to my desktop it say new hardware found and asks to install software for it but when i ask XP to install software automatically then it says no driver found.
the drive is plug and play so i don't have any software for it nor it is listed anywhere in the WD website.
However the drives is functioning properly in my laptop and on my freind's desktop as well....so seems like my drive's alrite.I can easily use 4gb pen drive and 30gb ipod on my desktop but not my external drive.
I tried to install my old Nero w/full lic key but it wouldn't.
Giving up the idea... I proceeded to remove every file with Ahead Or Nero in it. Used jv 16 Power tools to remove left overs. Nothing now shows in jv16 or search of all files & folders (with hidden & system showing). Ran CCleaner including other MRUs etc.
I had some bad sectors on an IBM thinkpad. The computer was booting just fine. I used ghost32 to ghost the drive (not just the partition) to an image and then back onto a brand new drive. Now I cannot get the new drive to boot. The partition is setup just like before and is active but once I get past the IBM bios screen it just doesn't do anything. If I put the old drive in it works fine.
View 7 Replies View Related
