2.5 Toshiba Notebook Drive / USB External Drive Not Recognized?
Mar 16, 2005
I installed an a 2.5 Toshiba notebook drive in a external enclosure and I can't get XP to recognize it. The drive spins up and the light comes on to indicate it is running but nothing is shown in device manager or My computer. It also is not shown in disk management.I have uninstalled the the USB drivers through the device manager with no change after rebooting. The USB ports work fine with my other external drive.The drive was working fine in a notebook that had a
cracked screen. It is formated in NTFS. What else should I be looking at to solve this problem?
I have a Dell 600m (two year old) and now that I am doing lots of video capture, I have less than two gigs left on its puny 30 gig drive. I want an excellent rugged performing hard drive that will work great with this for demanding video purpose. I use the most memory intensive settings because I am a videophile. I want to spend under $500 bucks. I still owe $900 on this at my 29.99% interest rate and don't wanted to ditch this otherwise acceptable notebook.
After backing up on this drive for nine months (and with a reformating three months ago), now the backup will not recognize the E: drive. No error message is given. MY Computer shows that it is now 3/4 full with plenty of space (46 gig) on the Acomodate 160 gig drive under NTSF format. I am thinking of changing to a fire wire from the USB.I have been doing a complete system backup and maybe I'll change to just backing up my documents after we get it working.
both my externals are perfectly fine....they work on my other computer. Originally when i plugged them into my laptop the Found New Hardware wizard would startup, but be unable to do anything.
My USB External Hard Drive suddenly decided to stop working monday before last, it is weird, like it will turn on and all, but it doesnt get recognized and while its on none of my programs will load like Ventrilo and games(ventrillo will half load but not all the way) and the computer wont shutdown while its on. but the moment i turn it off they all start running smoothly agian and the computer will shutdown immediatly (if i am at the shutdown screen). Any idea why/how this happened and how to fix it?
Win XP Professional in new Dell Vostro does not recognize Bytecc 320 external hsng with 250 gb Seagate drive. Under hardware manager it shows up and says this device working properly. XP does not assign a drive letter. Disk management shows device but reports it as 128 Gb capacity. I do not want to settle for half the drive's capacity so i did not create a partition.
I have a sata 500 GB hard drive from Seagate that just won't get recognized. I've been in Disk Management, I've scanned the disk, I've rebooted, and Disk 1 is there, but the message is it's offline--and after I did the reboot I got the message that the hard drive USB had been recognized--but it ain't there.
I have a Sabrent SBT-EKU25 external enclosure with a 2.5 inch hard disk in it. This is a USB 2.0 drive and whenever I connect it to USB 2.0 port, it is not recognized (or "recognized" as an unknown device" ) on all my machines. It however is recognized as a drive and works fine on one laptop which has only USB 1.1 ports.I have tried separately powered USB hubs as well without success. So I don't think it's a power issue.I have even tried deleting all USB devices in Device Manager and let the machine rediscover them.
I have a Maxtor DiamondMax 10 250 GB hard drive. I had ghosted a dying WD 150 GB drive on it and had been using it about a week. After a restart it said that ntdlr was missing. Solved that problem. Then a little while later, the disk could not be recognized. Took it to a data recovery place and they said all the data was still on there. For $100 bucks, they reconstructed the logic on the drive - whatever that means - but to recover the data entirely was going to be $1500+. So I took it home to give the recovery a shot myself. I hooked it up as a cable select in the slave position on an existing Win XP Pro cable select ready system. The computer works fine but I can't see the 250 hard drive anywhere. Not in any software I have downloaded, not off any boot disks, not in any command prompts, not even in the bIOS. The cable is fine, the power is fine, and the drive spins up.
Toshiba satellite notebook that has something wrong with the driver. When i go to burn a dvd now or even a cd it tells me to attach an external drive, or the area where you choose which location to burn to is greyed out. I can't seem to look up the model number on the Toshiba website, the number on my receipt is A70wb200e, while the number i brought up using the system itself is mfwt020acp08.
After working for sometime with Maxtor One Touch II external drive, I have experienced the following problem: If the computer is left for some period of inactivity, for 1-2 or more hours (the light on the drive is on and not blinking) I cannot access the drive and the OS message is "One touch is not responding". The only remedy is to restart the computer. My System consists of: WindowsXP SP2 and 512 MB Ram The Maxtor OneTouch II drive is connected via a firewire inlet of the computer, the file system being NTFS. The drive is partitioned unto 2 logical drives (~150 GB each)
I have Dell XPS w 2 hard drives. the master is 80gb(NTFS).."C" drive, and the slave is 120gb(FAT32)...."F" drivethe other day, after a re-start, Windows gave me the not so friendly message "Checking file system on F...the volume is dirty...windows is verifying files and folders.......0 percent complete"now, the problem is that it took 30 HOURS! before it completed its checkup! well, so before i panicked too much, i decided to buy an external drive to back up some stuff from the slave drive. after backing up about 20 gb worth of stuff, i re-started, and it did the same thing! tho this time it took "only" 18 HOURS to do its checking! it did say that "windows replaced bad clusters in files"
i connected my external HDD to my system i copied some data but now i'm not able to open that drive i have partitioned the 160GB drive to 8 20GB drives bcoz i have very important data in that drive
This question is for my grandson - he has a Toshiba notebook XP and everytime he logs on to his account it freezes when loading icons etc. the guest account works reasonably well.This started when his cousin downloaded the new windows msn 8 and that's when the freezing happened, tried to delete the new program from the add and remove but it says it cannot do this (no idea why) We have tried to disable his own account but it wont accept his administrators password. which makes it impossible to change anything as it tells us we need the permission of the administrator.
I've connected an external USB drive, but when I go to My Computer it shows it as a network drive. In addition, it gives it the same name as the mapped network drive that already exists there. When I change the name of the external drive there, it then changes the name of the mapped network drive, so again they both have the same name, although the drive letters are different. Any ideas how to make the external drive appear where it belongs in My Computer, under Hard Disk drives?
I turned the PC off to reboot when I though I was going into safe mode and went into regular mode instead. Now, it thinks one of my external drives is the C drive. On boot, I am getting a message that it cannot recognize find the system 32 windows config file (I'm paraphrasing).
I used the repair utility to get to the C prompt (which is pointed at the external drive) and checked the drive letters. I don't think the PC bios knows the hard drive is there.
I tried going into setup and reverting to factory installed configuration and that didn't change anything. I could not get it to recognize the hard drive.
My sis has one of those Wally-Mart Acer mini laptops; NO CD-ROM drive in it (PS: way-bad idea! Never buy a computer w/o a dvd/cd drive in it!). She managed to delete the graphics card driver and so when that occurred and rebooted, nothing on-screen! Its there, you just cannot see anything in windows! And, because there is no drive, the CD with all the original programs cannot be run in start-up mode without an external CD-ROM drive
I want to use my (HP Pavilion zv6000 w/XP) laptop as that external drive to re-load her original CD, which (of course) has all the drives on it! At start-up, the Acer (also w/XP) has an option to start-up from an ext. drive, so it has that capability (obviously, w/o a drive of its own), but how to make my HP "look" like an external drive (via USB-to-USB hookup) is the problem!
I have 2 laptop hard drive both (20 gb) one is Hitachi and othe one is IBM . I did connected to the IDE of my Desktop computer and the first one is recognize (Hitachi) but other one (IBM) doesn't recognize .when it was connected I did open the cover and the disk is runing . please inform me with any idea and I am not sure when i did open it if everything is right place . if there is some website of the Notebook hard drive which is shows tutorial or with good pictures then i see everything is right place .
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
My niece has a Toshiba Satellite laptop on which the harddrive died. My aunt ordered a new drive from newegg a couple of days ago. My question is this, will her Toshiba Recovery CD's work on the new hard drive or will she need an actual reinstallation CD for XP home? Thank you for any help in this matter.
I have been using this pc with windows xp for about a month now and up to now I have had no problems, but for some reason my drive has suddenly stopped reading dvds...My drive is an Optiarc DVD-RW AD-5170AI can insert a cd and it recognizes and reads the disk perfectly, but when I insert a dvd windows appears to start to read the disk, but after a few seconds nothing seems to be happening except that the read light on the drive is lit and the drive makes a few strange sounds. I have left it to load for a few minutes but still nothing happens.After searching, I have found 2 possible solutions:The first was to uninstall the driver and restart. Upon restart windows will reinstall the device.I tried that twice, still experiencing the same problem.
A Toshiba Satellite 2805-S503 that originally came with Windows ME. My friend at work upgraded my OS to Windows XP but now my CD-ROM drive doesn't recognize CDs. It recognizes DVDs and some games, but it won't read any CDs.
I have a Compaq Presario with a Celeron CPU 2.53 GHz and 504 MB of Ram. I use Windows XP Home Edition Version 2002 Service Pack 3. I know its a old machine but does what I need it to do. My computer has done this for a long time but I'm getting sick of having to restart the system to access CD drive. When system initially boots up the CD drive will open and close just fine but sometime later (not sure exactly how much later, (hours of 1-2 days) the door won't open by pushing button or sticking pin in small hole. If I go to My computer it doesn't even show the CD drive. What could be causing this?
I'm now praying that this will get fixed--my computer isn't recognizing any cd's I put in my d drive. It won't show up anywhere and when I go to my device manager there's a red x on top of the cd icon. I don't have any viruses or anything-I've run everything- and I've tried unplugging some of the wires and replugging them. I don't even know what that;s suposed to do or which wire is which. If anyone can help I would be soooooo grateful. my dad'll blame this on me if it doesnt get fixed asap. I have windows xp. and when I type in D:/ into run, I get the message:
D:/ refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it stil cannot be located, the information might have been moved to a different location.
I've got a IBM ThinkCenter that just won't boot. It powers on just fine, and I even tried installing a brand new power supply, so power isn't the problem. When I turn it on, I almost immediately get the IBM and Intel logos on screen but that's all. The machine does not seem to try to read from the hard drive, CD ROM or A drive. It never allows me to enter the BIOS or try to start Windows. I'm not even sure if the keyboard and mouse are being recognized. Is this a hardware problem? if so what? or can I still get this thing to boot somehow?
I have a Toshiba Satellite A205-S5000 with Vista home on it and it works OK, but I bought a larger HDD and I thought that I would put Windows XP PRO on it, I went from a Hitachi 160GB 2.5" SATA drive to a 250GB drive, same Manufacturer, the only difference in the drives is the original was a SATA 1.50 and the new drive is a 3.0, BIOS see's the drive and the XP disk does al the usual stuff, then it asks if you want to Install windows on it, so I click OK and then it says the windows cannot detect any HDD and aborts the installation, I know that the 2 SATA's are compatible and the only draw back is that the 3.0 may operate in the 1.5 mode in the worse case scenario, but windows doesn't see the drive at all.
I was aware that Windows used to have limitations on the size of Hard Disk Drives for file sizes etc. but I had thought that these had now been fixed with XP & XP PRO. I installed a new 250GB into a friends machine about a month ago & this went without incident. Yesterday I just put into an external caddie a USB2 drive of 300GB into my machine. XP Pro recognizes the drive & it will work but my computer displays the size as only 127GB which is less than half 's true size.
I recently recieved a Maxtor 40 GB Hard drive. i have installed everything Correctly ie. Power, Cable, ect. I have tried every single configuration of Jumper settings. It was reconized in bios, but it wouldn't come up as an icon in Xp. I have Xp Home W/SP2
I have two hard drives that were working perfectly on XP. I thentook out the second hard drive because I wanted to try and fix anotherhard drive. When I was finished I then put the original second harddrive back and now it is not recognized anywhere. Why? I may have moved the jumpers but I am pretty sure I did not. Even so I checked the picture on the hard drive and put them in the proper place. Why is the same drive now not recognized when it was just a day ago? I need to getsome files from it
