New Hard Drive Not Recognized Correctly
Jun 19, 2005
I was aware that Windows used to have limitations on the size of Hard Disk Drives for file sizes etc. but I had thought that these had now been fixed with XP & XP PRO. I installed a new 250GB into a friends machine about a month ago & this went without incident. Yesterday I just put into an external caddie a USB2 drive of 300GB into my machine. XP Pro recognizes the drive & it will work but my computer displays the size as only 127GB which is less than half 's true size.
View 4 Replies
ADVERTISEMENT
Jul 4, 2005
I recently recieved a Maxtor 40 GB Hard drive. i have installed everything Correctly ie. Power, Cable, ect. I have tried every single configuration of Jumper settings. It was reconized in bios, but it wouldn't come up as an icon in Xp. I have Xp Home W/SP2
View 5 Replies
View Related
May 16, 2005
I have a Maxtor DiamondMax 10 250 GB hard drive. I had ghosted a dying WD 150 GB drive on it and had been using it about a week. After a restart it said that ntdlr was missing. Solved that problem. Then a little while later, the disk could not be recognized. Took it to a data recovery place and they said all the data was still on
there. For $100 bucks, they reconstructed the logic on the drive - whatever that means - but to recover the data entirely was going to be $1500+. So I took it home to give the recovery a shot myself. I hooked it up as a cable select in the slave position on an existing Win XP Pro cable select ready system. The computer works fine but I can't see the 250 hard drive anywhere. Not in any software I have downloaded, not off any boot disks, not in any command prompts, not even in the bIOS. The cable is fine, the power is fine, and the drive spins up.
View 2 Replies
View Related
Sep 6, 2005
I have two hard drives that were working perfectly on XP. I thentook out the second hard drive because I wanted to try and fix anotherhard drive. When I was finished I then put the original second harddrive back and now it is not recognized anywhere. Why? I may have moved the jumpers but I am pretty sure I did not. Even so I checked the picture on the hard drive and put them in the proper place. Why is the same drive now not recognized when it was just a day ago? I need to getsome files from it
View 2 Replies
View Related
Jan 30, 2007
both my externals are perfectly fine....they work on my other computer. Originally when i plugged them into my laptop the Found New Hardware wizard would startup, but be unable to do anything.
View 5 Replies
View Related
Jun 29, 2007
I run WIN XP Pro on a Dell desktop that has two hard drive. I recently installed a CD drive and upon rebooting, the secondary drive (D), although recognized by the startup (BIOS), is no longer present when Windows finally opens. It's not present in the device manager and all shortcuts to it are null. All the bables are correctly installed and I've tried rebooting, re-installing the drive to no avail.
View 12 Replies
View Related
May 11, 2007
My USB External Hard Drive suddenly decided to stop working monday before last, it is weird, like it will turn on and all, but it doesnt get recognized and while its on none of my programs will load like Ventrilo and games(ventrillo will half load but not all the way) and the computer wont shutdown while its on. but the moment i turn it off they all start running smoothly agian and the computer will shutdown immediatly (if i am at the shutdown screen). Any idea why/how this happened and how to fix it?
View 1 Replies
View Related
Apr 18, 2010
I have a sata 500 GB hard drive from Seagate that just won't get recognized. I've been in Disk Management, I've scanned the disk, I've rebooted, and Disk 1 is there, but the message is it's offline--and after I did the reboot I got the message that the hard drive USB had been recognized--but it ain't there.
View 8 Replies
View Related
Sep 12, 2009
Oem disc auto partions any hdd as 16GB os fat 32/D:\ drive NTFS raw. The Sony OEM disc(s) are pre sp1.
What steps do I take to install and get the full 200 GB to bea recoginized correctly?
View 1 Replies
View Related
Mar 16, 2005
I installed an a 2.5 Toshiba notebook drive in a external enclosure and I can't get XP to recognize it. The drive spins up and the light comes on to indicate it is running but nothing is shown in device manager or My computer. It also is not shown in disk management.I have uninstalled the the USB drivers through the device manager with no change after rebooting. The USB ports work fine with my other external drive.The drive was working fine in a notebook that had a
cracked screen. It is formated in NTFS. What else should I be looking at to solve this problem?
View 4 Replies
View Related
Sep 1, 2005
I have a Sabrent SBT-EKU25 external enclosure with a 2.5 inch hard disk in it. This is a USB 2.0 drive and whenever I connect it to USB 2.0 port, it is not recognized (or "recognized" as an unknown device" ) on all my machines. It however is recognized as a drive and works fine on one laptop which has only USB 1.1 ports.I have tried separately powered USB hubs as well without success. So I don't think it's a power issue.I have even tried deleting all USB devices in Device Manager and let the machine rediscover them.
View 2 Replies
View Related
Mar 21, 2008
everytime i start my pc i get the following message:
error auto-sensing primary hard disk drive 0 strike the f1 key to continue, f2 to run the setup utility.
when i push f1 the same message will pop up.if i go into the setup utility and look at the primary drive 0 it says hard drive.it stands on auto but it doesnt show the capacity.
the same thing with the secondary rive 1.i have 2 hard drives.1 with 20 gig and the second 1 with 250 gig.both arent recognized by my pc.i cant format the pc cause i dont have hard drives to install xp on >.<
View 3 Replies
View Related
Jul 25, 2009
everytime i plug in a usb/external hardrive, it isnt recognized in my computer, its not too do with any hardware, im 100% its a software issue, and i was running a program and it seemed to do something nothing comes up in my computer but you hear the connected sound, ive tried assignign a manual drive letter but it comes up with an error. and seeing as i cant back anything up because nothings regonized
View 14 Replies
View Related
Sep 24, 2005
i have a 20 gig hd (maxtor) that is not showing in windows xp. the drive is NTFS and is fine and does show in cmos but once loaded into windows it is not there. i had the drive previously in another system as a slave only for mp3's. It was formatted NTFS prior to transferring mp3's to it. Now i've tried it as both master and slave to get the files off but am now having this problem of windows not seeing it when i go into windows explorer
View 8 Replies
View Related
Oct 28, 2009
Issue 1 :
I have bought the current hard disk one month back due to failure of the previous one. Both are of Seagate. My PC stuck up suddenly while working with the noise from hard disk ( clicking noise ) When I restarts the PC the PC stops booting after the BIOS screen with the error messages like "unable to load OS" or "disk not found". If I remove and replace the hard disk connection, it works normally. But, the PC stuck up after 1 day or after few hours. I have performed the hard disk self tests with Seatools software from Seagate.
View 1 Replies
View Related
Sep 21, 2007
I have been using this pc with windows xp for about a month now and up to now I have had no problems, but for some reason my drive has suddenly stopped reading dvds...My drive is an Optiarc DVD-RW AD-5170AI can insert a cd and it recognizes and reads the disk perfectly, but when I insert a dvd windows appears to start to read the disk, but after a few seconds nothing seems to be happening except that the read light on the drive is lit and the drive makes a few strange sounds. I have left it to load for a few minutes but still nothing happens.After searching, I have found 2 possible solutions:The first was to uninstall the driver and restart. Upon restart windows will reinstall the device.I tried that twice, still experiencing the same problem.
View 5 Replies
View Related
Dec 13, 2006
A Toshiba Satellite 2805-S503 that originally came with Windows ME. My friend at work upgraded my OS to Windows XP but now my CD-ROM drive doesn't recognize CDs. It recognizes DVDs and some games, but it won't read any CDs.
View 6 Replies
View Related
May 18, 2005
applications were running slow, having problems closing etc. I expected a virus problem, but NIS 2005 did not detect any viruses. This morning I attempted to boot the machine as usual, and I found that windows would not boot after repeated attempts in any mode. I borrowed a friends windows XP cd, i dont have mine on hand, and attempted to repair the installation. However, when it tried to copy files to the hard drive it said that it could not detect it.
Naturally, seeing this i assumed that the harddrive had gotten knocked around, bad power lead, etc. I made sure that the connecters were securely attached and booted again, repair etc, same problem. I believe that the problem lies with the configuration of using a PCI card to connect the hard drive to the motherboard. When its connected to the mother board, however, the boot agent wont run, saying that the "disk is not ready" or something to that extent.
View 12 Replies
View Related
Jun 8, 2006
I did forget to mention that I had tried this external on 2 different pcs-- the other with xp home with sp2.
View 5 Replies
View Related
Feb 1, 2009
I have a Compaq Presario with a Celeron CPU 2.53 GHz and 504 MB of Ram. I use Windows XP Home Edition Version 2002 Service Pack 3. I know its a old machine but does what I need it to do. My computer has done this for a long time but I'm getting sick of having to restart the system to access CD drive. When system initially boots up the CD drive will open and close just fine but sometime later (not sure exactly how much later, (hours of 1-2 days) the door won't open by pushing button or sticking pin in small hole. If I go to My computer it doesn't even show the CD drive. What could be causing this?
View 7 Replies
View Related
Jun 22, 2005
I'm now praying that this will get fixed--my computer isn't recognizing any cd's I put in my d drive. It won't show up anywhere and when I go to my device manager there's a red x on top of the cd icon. I don't have any viruses or anything-I've run everything- and I've tried unplugging some of the wires and replugging them. I don't even know what that;s suposed to do or which wire is which. If anyone can help I would be soooooo grateful. my dad'll blame this on me if it doesnt get fixed asap. I have windows xp. and when I type in D:/ into run, I get the message:
D:/ refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it stil cannot be located, the information might have been moved to a different location.
View 9 Replies
View Related
Feb 20, 2007
I've got a IBM ThinkCenter that just won't boot. It powers on just fine, and I even tried installing a brand new power supply, so power isn't the problem. When I turn it on, I almost immediately get the IBM and Intel logos on screen but that's all. The machine does not seem to try to read from the hard drive, CD ROM or A drive. It never allows me to enter the BIOS or try to start Windows. I'm not even sure if the keyboard and mouse are being recognized. Is this a hardware problem? if so what? or can I still get this thing to boot somehow?
View 11 Replies
View Related
Dec 26, 2005
After backing up on this drive for nine months (and with a reformating three months ago), now the backup will not recognize the E: drive. No error message is given. MY Computer shows that it is now 3/4 full with plenty of space (46 gig) on the Acomodate 160 gig drive under NTSF format. I am thinking of changing to a fire wire from the USB.I have been doing a complete system backup and maybe I'll change to just backing up my documents after we get it working.
View 10 Replies
View Related
Apr 2, 2007
I was messing with partitioning my hard drive. Nothing challenging, but it seemed to work. But then partition magic said the entire drive was "BAD" and had no partitions, knowing full well it had four.
My computer still worked. Then it would get to where it was restarting on its own for no reason. Then sometimes the bios recognized the master and the slave drive and loaded, but most of the time it didn't recognize either, and wouldn't load. Sometimes it just recognized one drive.
I had thought maybe the MBR was messed up. But then why wouldn't the bios recognize the drives every time. And if one drive was messed up, that wouldn't effect the bios would it
View 1 Replies
View Related
Sep 12, 2005
First off, I give much respect and appreciation to those who run and contribute to this website. I have followed for a while and see great things happening here everyday. Kudos to you all. My issue is that I got a pretty nasty virus that I feared had wiped my hard drive. It corrupted my boot sector somehow and I couldn't even boot in safe mode w/o the blue screen of death giving me a stop error. I used an install disc and fixed it with the software fix. so now I am back up and running all systems go.
View 14 Replies
View Related
Mar 5, 2010
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
View 1 Replies
View Related
Feb 27, 2008
Win XP Professional in new Dell Vostro does not recognize Bytecc 320 external hsng with 250 gb Seagate drive. Under hardware manager it shows up and says this device working properly. XP does not assign a drive letter. Disk management shows device but reports it as 128 Gb capacity. I do not want to settle for half the drive's capacity so i did not create a partition.
View 8 Replies
View Related
Aug 5, 2010
My laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
View 6 Replies
View Related
Oct 13, 2009
current HD going bad, have second HD installed and using as back but now i need to make the second HD my primary, can i do this without having to reformat in order to add booting files.
View 2 Replies
View Related
Dec 5, 2007
using XP. am having wild swings in my hard drive space go from 46.1 to 44.1 and sometimes in between. have not installed any new programs recently. what could be causing it and how do i correct also am noticing my laptop as slowed appreciablydo know whether the two problems are correlated
View 3 Replies
View Related
Jul 2, 2008
i have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP .
well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
View 5 Replies
View Related
