Win XP Professional in new Dell Vostro does not recognize Bytecc 320 external hsng with 250 gb Seagate drive. Under hardware manager it shows up and says this device working properly. XP does not assign a drive letter. Disk management shows device but reports it as 128 Gb capacity. I do not want to settle for half the drive's capacity so i did not create a partition.
View 8 Repliesquality of AcomData External HD? Also, is this a well established company? Any info as to how this brand compares to a Seagate External HD?
View 5 Replies View RelatedI have an external USB 300GB Seagate drive that used to work fine.Then, periodically XP would not recognize when I turned it on. A re-boot would fix the problem. Now, XP won’t recongnize the drive at all. I get an "unknown device" error. I have a USB 2.0 card I plug the drive into, and all other devices in that card work fine. The device driver manager says all is well, except of course with the "unknown device" it notes, which is the external drive.
View 8 Replies View RelatedI did forget to mention that I had tried this external on 2 different pcs-- the other with xp home with sp2.
View 5 Replies View RelatedAfter backing up on this drive for nine months (and with a reformating three months ago), now the backup will not recognize the E: drive. No error message is given. MY Computer shows that it is now 3/4 full with plenty of space (46 gig) on the Acomodate 160 gig drive under NTSF format. I am thinking of changing to a fire wire from the USB.I have been doing a complete system backup and maybe I'll change to just backing up my documents after we get it working.
View 10 Replies View RelatedI installed an a 2.5 Toshiba notebook drive in a external enclosure and I can't get XP to recognize it. The drive spins up and the light comes on to indicate it is running but nothing is shown in device manager or My computer. It also is not shown in disk management.I have uninstalled the the USB drivers through the device manager with no change after rebooting. The USB ports work fine with my other external drive.The drive was working fine in a notebook that had a
cracked screen. It is formated in NTFS. What else should I be looking at to solve this problem?
both my externals are perfectly fine....they work on my other computer. Originally when i plugged them into my laptop the Found New Hardware wizard would startup, but be unable to do anything.
View 5 Replies View RelatedMy USB External Hard Drive suddenly decided to stop working monday before last, it is weird, like it will turn on and all, but it doesnt get recognized and while its on none of my programs will load like Ventrilo and games(ventrillo will half load but not all the way) and the computer wont shutdown while its on. but the moment i turn it off they all start running smoothly agian and the computer will shutdown immediatly (if i am at the shutdown screen). Any idea why/how this happened and how to fix it?
View 1 Replies View RelatedI have a sata 500 GB hard drive from Seagate that just won't get recognized. I've been in Disk Management, I've scanned the disk, I've rebooted, and Disk 1 is there, but the message is it's offline--and after I did the reboot I got the message that the hard drive USB had been recognized--but it ain't there.
View 8 Replies View RelatedI have a Sabrent SBT-EKU25 external enclosure with a 2.5 inch hard disk in it. This is a USB 2.0 drive and whenever I connect it to USB 2.0 port, it is not recognized (or "recognized" as an unknown device" ) on all my machines. It however is recognized as a drive and works fine on one laptop which has only USB 1.1 ports.I have tried separately powered USB hubs as well without success. So I don't think it's a power issue.I have even tried deleting all USB devices in Device Manager and let the machine rediscover them.
View 2 Replies View RelatedI have recently purchased and installed a Seagate external Hard Drive. When I turn my computer on the screen remains blank. I have to turn everything off, unplug the External hard Drive and then everything operates normally. Once the computer is booted up I can reconnect the external hard Drive and all works fine. The othe rnoticeable difference ids that the computer has become very very slow to respond to commands.
View 1 Replies View RelatedGot a Western Digital My Book essential edition USB 160GB, reformatted it from FAT32 to NTFS, backed up everything I wanted and did the clean install. It worked. I had a few problems getting the OS to recognize my USB Canoscan, but worked that out. My problem now is that the OS won't see the external hard drive unless I'm in safe mode. In safe mode it is assigned drive letter J, which was the same drive letter it was before the OS reinstall. It does not show up in drive manager. Nothing changes in device manager when I unplug/replug it and no new hardware is found. Device manager does show an unknown device, but that was there before anything was plugged in (which is distressing in itself!)
View 22 Replies View RelatedWhen trying to perform the following cmd instruction C:Documents and Settings......ping I get the following error message 'ping' is not recognized as a internal or external command
View 14 Replies View Relatedwhen trying to type a command in MS-DOS, I get the below error message. This is the same for an IPCONFIG or a PING command. Does anyone know how to correct this? I have win XP SP1 'ipconfig' is not recognized as an internal or external command,operable program or batch file.
View 2 Replies View RelatedI have a Western Digital Passport 320GB External Harddrive that is no longer recognized by the computer. It worked two days ago... now nothing. I get a pop up when I plug it in that states: USB Device Not Recognized.I checked Device Manager: Universal Serial Bus Controllers-Unknown Device.It's not a drive letter issue. Windows XP SP3 does not recognize it all.
View 8 Replies View Relatedeverytime i plug in a usb/external hardrive, it isnt recognized in my computer, its not too do with any hardware, im 100% its a software issue, and i was running a program and it seemed to do something nothing comes up in my computer but you hear the connected sound, ive tried assignign a manual drive letter but it comes up with an error. and seeing as i cant back anything up because nothings regonized
View 14 Replies View RelatedI have a pentium II running windows XP PRO. I intend to buy an external hard drive - 1TB Seagate SATA to use it with my USB port.I would like to know if is feasible , if would be any conflicts, easy to install or the possibility that the BIOS may not recognize it and what would be the easy way to format it.
View 3 Replies View RelatedI have a Seagate 120gb HD and used the Seagate Wizard Tools that I downloaded from them to ghost (clone) to a new Western Digital 160gb HD. They are both 7200rpm and SATA. The new drive boots up ok but only shows 128gb, not 154gb as it did before it was cloned (I am not talking about the size of the data that was cloned). I redid it in Manual mode but no change. As far as I know there are no partitions on the Seagate drive. Another thing I noticed is that the System Files were at the front of the Seagate 120gb drive but are at the end on the WD 160gb. This shows when the drives are Defraged. Can anybody sort this out for me? I am doing this so that I have a backup drive incase of a terminal crash. Forgot, I am using a Intel 915gag w/P4@3.2 and W2000Pro with all updates.
View 1 Replies View RelatedI recently installed a new Seagate 120 GB hard drive as a slave. I also installed iTunes and am importing songs from my CD collection. Since doing this I am frequently getting a blue screen on Windows XP w/ Service Pack 2. It also seems as though my system is a little sluggish.
View 1 Replies View RelatedI have a Maxtor DiamondMax 10 250 GB hard drive. I had ghosted a dying WD 150 GB drive on it and had been using it about a week. After a restart it said that ntdlr was missing. Solved that problem. Then a little while later, the disk could not be recognized. Took it to a data recovery place and they said all the data was still on
there. For $100 bucks, they reconstructed the logic on the drive - whatever that means - but to recover the data entirely was going to be $1500+. So I took it home to give the recovery a shot myself. I hooked it up as a cable select in the slave position on an existing Win XP Pro cable select ready system. The computer works fine but I can't see the 250 hard drive anywhere. Not in any software I have downloaded, not off any boot disks, not in any command prompts, not even in the bIOS. The cable is fine, the power is fine, and the drive spins up.
I have been using this pc with windows xp for about a month now and up to now I have had no problems, but for some reason my drive has suddenly stopped reading dvds...My drive is an Optiarc DVD-RW AD-5170AI can insert a cd and it recognizes and reads the disk perfectly, but when I insert a dvd windows appears to start to read the disk, but after a few seconds nothing seems to be happening except that the read light on the drive is lit and the drive makes a few strange sounds. I have left it to load for a few minutes but still nothing happens.After searching, I have found 2 possible solutions:The first was to uninstall the driver and restart. Upon restart windows will reinstall the device.I tried that twice, still experiencing the same problem.
View 5 Replies View RelatedA Toshiba Satellite 2805-S503 that originally came with Windows ME. My friend at work upgraded my OS to Windows XP but now my CD-ROM drive doesn't recognize CDs. It recognizes DVDs and some games, but it won't read any CDs.
View 6 Replies View RelatedI have a Compaq Presario with a Celeron CPU 2.53 GHz and 504 MB of Ram. I use Windows XP Home Edition Version 2002 Service Pack 3. I know its a old machine but does what I need it to do. My computer has done this for a long time but I'm getting sick of having to restart the system to access CD drive. When system initially boots up the CD drive will open and close just fine but sometime later (not sure exactly how much later, (hours of 1-2 days) the door won't open by pushing button or sticking pin in small hole. If I go to My computer it doesn't even show the CD drive. What could be causing this?
View 7 Replies View RelatedI'm now praying that this will get fixed--my computer isn't recognizing any cd's I put in my d drive. It won't show up anywhere and when I go to my device manager there's a red x on top of the cd icon. I don't have any viruses or anything-I've run everything- and I've tried unplugging some of the wires and replugging them. I don't even know what that;s suposed to do or which wire is which. If anyone can help I would be soooooo grateful. my dad'll blame this on me if it doesnt get fixed asap. I have windows xp. and when I type in D:/ into run, I get the message:
D:/ refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it stil cannot be located, the information might have been moved to a different location.
I've got a IBM ThinkCenter that just won't boot. It powers on just fine, and I even tried installing a brand new power supply, so power isn't the problem. When I turn it on, I almost immediately get the IBM and Intel logos on screen but that's all. The machine does not seem to try to read from the hard drive, CD ROM or A drive. It never allows me to enter the BIOS or try to start Windows. I'm not even sure if the keyboard and mouse are being recognized. Is this a hardware problem? if so what? or can I still get this thing to boot somehow?
View 11 Replies View RelatedAfter working for sometime with Maxtor One Touch II external drive, I have experienced the following problem: If the computer is left for some period of inactivity, for 1-2 or more hours (the light on the drive is on and not blinking) I cannot access the drive and the OS message is "One touch is not responding". The only remedy is to restart the computer. My System consists of: WindowsXP SP2 and 512 MB Ram The Maxtor OneTouch II drive is connected via a firewire inlet of the computer, the file system being NTFS. The drive is partitioned unto 2 logical drives (~150 GB each)
View 3 Replies View RelatedI have Dell XPS w 2 hard drives. the master is 80gb(NTFS).."C" drive, and the slave is 120gb(FAT32)...."F" drivethe other day, after a re-start, Windows gave me the not so friendly message "Checking file system on F...the volume is dirty...windows is verifying files and folders.......0 percent complete"now, the problem is that it took 30 HOURS! before it completed its checkup! well, so before i panicked too much, i decided to buy an external drive to back up some stuff from the slave drive. after backing up about 20 gb worth of stuff, i re-started, and it did the same thing! tho this time it took "only" 18 HOURS to do its checking! it did say that "windows replaced bad clusters in files"
View 2 Replies View Relatedi connected my external HDD to my system i copied some data but now i'm not able to open that drive i have partitioned the 160GB drive to 8 20GB drives bcoz i have very important data in that drive
View 9 Replies View RelatedI was aware that Windows used to have limitations on the size of Hard Disk Drives for file sizes etc. but I had thought that these had now been fixed with XP & XP PRO. I installed a new 250GB into a friends machine about a month ago & this went without incident. Yesterday I just put into an external caddie a USB2 drive of 300GB into my machine. XP Pro recognizes the drive & it will work but my computer displays the size as only 127GB which is less than half 's true size.
View 4 Replies View RelatedI recently recieved a Maxtor 40 GB Hard drive. i have installed everything Correctly ie. Power, Cable, ect. I have tried every single configuration of Jumper settings. It was reconized in bios, but it wouldn't come up as an icon in Xp. I have Xp Home W/SP2
View 5 Replies View RelatedI've connected an external USB drive, but when I go to My Computer it shows it as a network drive. In addition, it gives it the same name as the mapped network drive that already exists there. When I change the name of the external drive there, it then changes the name of the mapped network drive, so again they both have the same name, although the drive letters are different. Any ideas how to make the external drive appear where it belongs in My Computer, under Hard Disk drives?
View 8 Replies View Related