I have a Seagate 120gb HD and used the Seagate Wizard Tools that I downloaded from them to ghost (clone) to a new Western Digital 160gb HD. They are both 7200rpm and SATA. The new drive boots up ok but only shows 128gb, not 154gb as it did before it was cloned (I am not talking about the size of the data that was cloned). I redid it in Manual mode but no change. As far as I know there are no partitions on the Seagate drive. Another thing I noticed is that the System Files were at the front of the Seagate 120gb drive but are at the end on the WD 160gb. This shows when the drives are Defraged. Can anybody sort this out for me? I am doing this so that I have a backup drive incase of a terminal crash. Forgot, I am using a Intel 915gag w/P4@3.2 and W2000Pro with all updates.
I have a pentium II running windows XP PRO. I intend to buy an external hard drive - 1TB Seagate SATA to use it with my USB port.I would like to know if is feasible , if would be any conflicts, easy to install or the possibility that the BIOS may not recognize it and what would be the easy way to format it.
I have an external USB 300GB Seagate drive that used to work fine.Then, periodically XP would not recognize when I turned it on. A re-boot would fix the problem. Now, XP won’t recongnize the drive at all. I get an "unknown device" error. I have a USB 2.0 card I plug the drive into, and all other devices in that card work fine. The device driver manager says all is well, except of course with the "unknown device" it notes, which is the external drive.
Win XP Professional in new Dell Vostro does not recognize Bytecc 320 external hsng with 250 gb Seagate drive. Under hardware manager it shows up and says this device working properly. XP does not assign a drive letter. Disk management shows device but reports it as 128 Gb capacity. I do not want to settle for half the drive's capacity so i did not create a partition.
I recently installed a new Seagate 120 GB hard drive as a slave. I also installed iTunes and am importing songs from my CD collection. Since doing this I am frequently getting a blue screen on Windows XP w/ Service Pack 2. It also seems as though my system is a little sluggish.
I've connected an external USB drive, but when I go to My Computer it shows it as a network drive. In addition, it gives it the same name as the mapped network drive that already exists there. When I change the name of the external drive there, it then changes the name of the mapped network drive, so again they both have the same name, although the drive letters are different. Any ideas how to make the external drive appear where it belongs in My Computer, under Hard Disk drives?
I just bought and connected a WD 160gb Passport External USB Drive. I check the Drive's directory. All's normal. I then installed Portable Apps Suite onto the USB Drive. Now when I check the directory of the USB Drive, I see the files/folders that are supposed to be there, which fine and dandy. But I also see two extra things:
1. Recyle Bin (contents exactly as the one on my desktop. If i empty it, the bin on the USB drive gets emptied. If I delete something on the desktop. The recycle bin on the USB drive shows that too!)
2. System Volume Information AA: How did these two files get there? BB: How do I get them off the USB Drive?
Recorded a show onto a RWDVD. It plays on the dvd player fine. I wanted to edit it and then burn to a R disc. BUT, my computer E drive says the disc is blank. Is there any way to access the files via my computer?
I was repartitioning my slave drive G from 120 to 130 gigs and reformatted other parition of slave F leaving main c alone.MY computer crashed while moving data and when it came back up I get error 1507 bad file record signature and cant use chkdsk or partition magic again since i cant access drive and properties show it listed as raw o data and corrupted or damaged.I tried rescue disks but dint fix it and system restore on whole computer didnt work and chkdsk doesnt even see the g drive
I have recently fitted a Hitachi Deskstar 250gb Hard drive(model:HDS722525VLAT80) to my computer.After Re-instaling windows (xp) the drive was showing as 125gb.I have been told this is because windows xp will only support 125gb without service pack 2.I have now downloaded SP2. but it still shows as 125gb.
Reformatting a pc of mine to give to my sister. Her old computer had some info on its hard drive that she needed. It was too big to fit on a floppy and the CDROM had died so I took her old drive and hooked it up in the newer pc. The problem is: it shows up in System Devices but not in Windows Explorer. I tried right clicking on My Computer and then Manage to assign a drive letter to it, but it wont allow me. The option for assigning a drive letter isnt even available for that hard drive.
Reformatted my hard drive, Drive C and reinstalled Windows XP Professional SP3 and all the drivers. The drive is 120 GB. I have a Dell 8300, now all of a sudden when I click on Drive C it shows that I only have 24% unused space on my hard drive. It has been defragged and I know it shouldn't be showing that full.
I was downloading some file, and while I was downloading, it said I've got a very low amount of free disk space, which was then about ~50MB, and going down (drive C: ). I tried deleting some files (in total about 400MB), but it showed the same amount of free space, and kept going down. Ultimately, my download stopped because of this, and the free space is gone.I don't have System Restore enabled, it's disabled, on all drives (C: & D: ), and I don't think I have some kind of an automated backup program. Plus, my two drives are formatted in NTFS, not FAT. if that helps. I haven't tried to reset yet, but besides reset, is there anything else I should try?
I have a sata 500 GB hard drive from Seagate that just won't get recognized. I've been in Disk Management, I've scanned the disk, I've rebooted, and Disk 1 is there, but the message is it's offline--and after I did the reboot I got the message that the hard drive USB had been recognized--but it ain't there.
I am trying to install Windows XP Pro on a second hard drive in my computer, but when i insert the disc it says something about setup scanning the system or something of that nature.Then the screen goes blank and doesn't do anything else. The reason why I dont want to just upgrade is because some things I use dont play nice with XP pro and I want a clean install of it. How can I get my computer to install this second OS properly?
When I click on start=>programs=>accessories=>system tools,its shows empty.I would like to know how can I restore my system tools as I would want to perform a system restore for my PC.
XP Home, Asus P4C800-E MB, 2 hard drives on IDE 1: both work fine at UDMA 6.Second IDE has my DVD burner in the master position and works fine at UDMA 4.I'm using the proper cable, plus I also tried a new one when installing the drive. I installed a 320 gb Seagate ST3320620A ATA100 into the Secondary Slave position and jumpered it as shown on Seagate's website (no jumpers). I made three partitions, and formatted them as per instructions in XP's Disk Management. They all show as 'healthy' in Windows. The only thing is that my computer has slowed to a crawl, with a re-boot taking about 7 minutes. I checked Dev. Mgr. and saw that the burner was at UDMA 4, but the new drive was at PIO mode, even though 'DMA if available' was selected. I tried Bob's suggestion of changing the settings back and forth and also deleting the secondary IDE channel and rebooting, but nothing works. It remains in PIO mode. I checked all the settings in the bios and they seem correct. Tried alternatives too, but it didn't change anything. On bootup, the bios screen shows all the drives correctly, the drive in question as UDMA 5. I have Windows 98SE on drive 1 on the Primary IDE with Windows XP Home on the second drive, to allow a dual boot. It has worked well until I tried installing this new hard drive. I removed it and installed it in a second machine and it is the Master on the Secondary IDE, with nothing in the slave position. Still in PIO mode. This other machine is also a dual-boot with 98SE on the first HD and XP Pro on the second, both on the Primary IDE.The 3 partitions are in NTFS format and all drives are visible in Dev. Mgr. and all partitions are visible in My Computer.
I added a new 250 gig ATA Seagate drive to my son's EMachine 2882. I added it as a Slave drive (setting jumper to slave and placing on the end of the parallel cable) to use for backing up purposes.Everything is fine, I think. Went into Disk Management and attempted to partition the un allocated new disk. For some strange reason, everytime I try to partition the disk it appears to be (not sure) but it appears to be creating 8 megabyte partitions? Do I have some setting in the BIOS that needs tweaking? I am not a total idiot, but I am beginning to wonder! Can anyone please get me on the right track here? XP does recognize the Seagate drive but something is screwy with the formatting process.
My C Drive recently crashed and I replaced it with a Seagate 7200 - 80 Gb Harddrive. I also installed Windows XP - Home Edition. First thing I did when I had it up and running was to look at the Properties for the Drive.I shows it as being 7.82 Gb. I phoned my installer and told him about my problem and he suggested that I go to the Seagate Website and get a Seagate disk overlay.
When my XP re-booted after installing Free-Agent, the screen froze. Some say disable "Legacy USB Support". How do I do this and will it interfere with my USB mouse, etc?
I have 2 Hard drive 80GB and 200GB. Windows XP SP2 in 80GB Hard Drive.I was using 200GB Segate SATA as single partion with lots of my photographi working files stored in it. Recently I installed a new hard 40 GB drive but wrongly installed Windows XP1 and my 200GB hardisk show my 128GB but no file in it. Again I used my old hard drive with 80GB (Windows XP SP2) and connected the 200GB hard drive. Drive Show (The disk in Drive D: is not formated. Do you want to format it now?) PPTD to fix the MBR and rebuild partition. But Now It shows 200GB but Not able to view any files and asking me to Format.
I have recently purchased and installed a Seagate external Hard Drive. When I turn my computer on the screen remains blank. I have to turn everything off, unplug the External hard Drive and then everything operates normally. Once the computer is booted up I can reconnect the external hard Drive and all works fine. The othe rnoticeable difference ids that the computer has become very very slow to respond to commands.
I am running Win xp sp2 with Sygate Firewall.In the last 24 Hours I have been asked by Sygate Firewall if I want to accept C:Windowssystemn32 toskml.exe.I have said no because I think it might be a nasty.What do you all think.
My computer was missing a system file after restarting one day. I inserted winxp disk to repair I would boot from it but the setup would wouldn't ever load anything. I reformatted with the Seagate disk and tried a different winxp disk to install same thing, it hangs at asking for third party adapter software. Any ideas? Winxp, 160gig SATA seagate, 1gig of ram biostar mobo. It all worked fine until I lost that file now I cant even reload windows!
I have XP Home version and have had some unusual issue wth System Restore. When I bring up utilities for system restore, it shows drive I as the system drive instead of drive C.I can sort of understand why this might happen because I installed a new 200 gig drive 5 months ago and made my old C drive I. My system tells me that C is my boot drive and I am not having any real problems except with restore. Looks like something is wrong in restor's database.
