Computer Wont Recognize External Seagate Drive?
Jul 10, 2005
I have an external USB 300GB Seagate drive that used to work fine.Then, periodically XP would not recognize when I turned it on. A re-boot would fix the problem. Now, XP won’t recongnize the drive at all. I get an "unknown device" error. I have a USB 2.0 card I plug the drive into, and all other devices in that card work fine. The device driver manager says all is well, except of course with the "unknown device" it notes, which is the external drive.
View 8 Replies
ADVERTISEMENT
Jan 7, 2007
quality of AcomData External HD? Also, is this a well established company? Any info as to how this brand compares to a Seagate External HD?
View 5 Replies
View Related
Nov 1, 2007
my external hard drive all of a sudden stopped showing up in "my computer"
and a can't find it anywhere else. it make the hardware sound when I plug it in but nothing shows up. when I plug it in another port it comes up with a message saying "USb device not recognized. one of the usb device attached to this computer has malfunction and windows cannot recognize it
View 7 Replies
View Related
Feb 27, 2008
Win XP Professional in new Dell Vostro does not recognize Bytecc 320 external hsng with 250 gb Seagate drive. Under hardware manager it shows up and says this device working properly. XP does not assign a drive letter. Disk management shows device but reports it as 128 Gb capacity. I do not want to settle for half the drive's capacity so i did not create a partition.
View 8 Replies
View Related
Jun 1, 2010
I have recently purchased and installed a Seagate external Hard Drive. When I turn my computer on the screen remains blank. I have to turn everything off, unplug the External hard Drive and then everything operates normally. Once the computer is booted up I can reconnect the external hard Drive and all works fine. The othe rnoticeable difference ids that the computer has become very very slow to respond to commands.
View 1 Replies
View Related
Mar 18, 2006
I'm connecting a 30GB Travelstar Hard Drive via an external USB 2.0 case to my Thinkpad T40 with Windows XP (pro). Windows immediately recognized it. However, the hard drive does not show up under Windows Explorer. I can go into Device Manager, click on Disk Drives, and it does show the new drive there (along with my main hard drive, which is a 80 GB hard drive).
I cannot figure out how to make it show up in Windows Explorer with an Drive Letter assigned to it and thus, how to actually use it.
View 6 Replies
View Related
Sep 29, 2007
I'm struggling to connect my Sony Handycam DCR-SR42 to my Compaq Laptop, Windows XP.It works on other computers without a problem that's why I think it must be some setting in XP. I plug it in when prompted by installation software and the camera goes to :'preparing' Then immediately the windows found new hardware creen pops up. On the other computers that screen didn't come up and the camera would go straight into connecting' mode.I tried switching the 'found new hardware' off by disabling the plug and play in'services' with no luck.When I connect the camera while I'm starting up the laptop, it goes straight into 'connecting' mode but unfortunately that stops as soon as windows is started.I would like windows to detect my camera as a drive and not 'other devices
View 1 Replies
View Related
Jan 20, 2009
Previously, my laptop did recognize the drive but for some reason it is now not finding it. I have plugged the drive into another computer and it is recognized. The laptop will recognize other devices which I plug into it. I have checked for viruses and have also tried restoring to an earlier time but no luck recognizing it
View 2 Replies
View Related
Jul 26, 2005
I have a new samsun 120 GB hard drive that I have placed into two seperate external enclosures connected to my dell pentium 4 win XP computer via USB. My computer will not recognize the hard drive. It
powers up fine? Any ideas of what to do next?
View 5 Replies
View Related
Aug 2, 2008
Well I have an hard drive into a external enclousure but the windows XP of a new CPU do not finish detect it when I connect it. But the same external hard drive work fine in my laptop. I formated my CPU 2 times, but i got the same error of Windows. My CPU has a new motherboard Foxconn M7VMX-K.
The USB ports work fine with my pendrive.
In my computer i can see a new hard drive with a letter (K, whithout data.
The Windows XP Administrator Disk doesn't show nothing about the external hard drive.
View 6 Replies
View Related
Jul 20, 2005
I added a 120 gig Western Digital USB external drive and used Acronis to create a backup of my hard drive. I then used Windows XP to remove it as a USB device so I could power it off. Now, when I power it back on it is not recognized by XP and does not appear on My Computer or on Disk Management (where I originally formatted it for NTFS). All I get is a sound like a single "KERPLONK" when I power it on.
View 3 Replies
View Related
Nov 12, 2005
I just purchased an LG GSA-2166D external DVD burner. It is a USB 2.0 and when I plug it into my Windows XP computer it does not recognize it as the correct drive. Initially the drive showed up correctly and I loaded the software that came with it, but started having problems so I uninstalled the software and must have deleted something I needed. It now just shows up as a DVD-RAM or CD ROM drive and will not see anything on the drive. It gives me errors when I try to access it.Any help on what I need to download and reinstall to make this work?
View 6 Replies
View Related
Aug 9, 2007
My brother went to My Computer one day and saw that there was no disc drive there, it was working in the past, but now it doesn't show up, I don't think he did anything unusual. But it shows up under Safely Remove Hardware Wizard with "Samsung CD Drive" or something like that.
View 14 Replies
View Related
Apr 10, 2010
Earlier I formatted a PC with windows XP on it, the minute I plugged it up, a notification came up and said "This device can perform faster on a high speed 2.0 USB port". It says that when I plug them up into any USB port on the computer itself. The thing is, it will pretty much hang the system until I disconnect the external HD. It won't freeze 100%. It's responsive but no applications will open while it's trying to recognize the external.
It sounds to me like a USB driver problem or something because I'd assume it'd still recognize the drive even if it wasn't performing in a high speed 2.0 USB port... Any way to reinstall USB drivers? Never done that before. I have to use Hiren's Boot CD if I want to transfer files, simply because Windows XP won't recognize it and keeps popping up the notification.
View 4 Replies
View Related
Aug 19, 2009
I am running XP Pro on my computer. On another drive I have windows 7. My computer stopped booting to my XP drive all of a sudden, but it would let me boot to my Windows 7 drive. That lasted for about 3 days. Now I can't boot to either drive. When I start the computer it says there is no HDD. I tried to use the XP disk to repair, that didn't work., so I thought I'd do an XP install. But my hard drive doesn't show up all the time. Or it will show the HDD but upon trying to pick a partition to set up XP in, it then tell me there is no HDD. I get the blue screen of death, and have to manually force a shut down. Other times it tell me that the HDD is RAW, and it needs to be formatted. How can I get the HDD to format? Is there a way to do it through DOS. Sometimes I can't even get to the DOS prompt. The bootup section is corrupt. I need to repair it, but can't if the system doesn't see my HDD.
View 8 Replies
View Related
Aug 19, 2008
I used my External Harddrive on a macintosh computer - no problem there. I just needed to copy some files from the ext. onto the mac - All Good...
Now my PC won't recognize the files on my ext. I have been reading support forums for the like, but I have not found a solution.
The Mac did not give me any warning that it was altering the file format or anything like that, but it apparently has.
Is there any way I can get my files recognized by my p.c.? Windows XP.
View 1 Replies
View Related
Dec 16, 2005
there are several things but lets attack one at a time. first of all when i run antivi iget this (C:DOCUME~1OWNER~1.STELOCALS~1TEMPAAWTMPC23656656222749SETUP.EXE) contains the signature of the worm WORM/AlcraB no matter how many times i delete it it comes back. next when trying to browse this blank mos-dod screen comes up with this message.
16bit MS-DOS subsystem
c:windowssystem32xg4.exe the NTVDM cpu has encountered an illegal instruction
C5:054d IP: 0126 OP C6 56 e4 16d/ choose close to terminate this program
and when we set up verizon dsl and the guy had us go to run cmd and try to ping the ip address we got this: "ping" is not reconized as an internal or external command, operable program or batch file and we tried several commands from this window and got the same message for all of them. and the guy at verizon said he was surprised that the pc was even running. well that's some of it got and recommendations other than total reformat?
View 14 Replies
View Related
Dec 15, 2006
I tried to run a knoppix (live linux distro) cd and changed the boot order (F2 setup) to boot from cd. Ok... the cd still wouldnt boot, so I went into F2 again and made all devices non-bootable except the cd player. When I tried this method... I was informed that my cd drive isnt a bootable device. I checked a few settings but couldnt find anything in regards to this. Im just trying to boot from my cd player.
View 12 Replies
View Related
Jan 19, 2009
I have a pentium II running windows XP PRO. I intend to buy an external hard drive - 1TB Seagate SATA to use it with my USB port.I would like to know if is feasible , if would be any conflicts, easy to install or the possibility that the BIOS may not recognize it and what would be the easy way to format it.
View 3 Replies
View Related
Mar 2, 2008
I have a Seagate 120gb HD and used the Seagate Wizard Tools that I downloaded from them to ghost (clone) to a new Western Digital 160gb HD. They are both 7200rpm and SATA. The new drive boots up ok but only shows 128gb, not 154gb as it did before it was cloned (I am not talking about the size of the data that was cloned). I redid it in Manual mode but no change. As far as I know there are no partitions on the Seagate drive. Another thing I noticed is that the System Files were at the front of the Seagate 120gb drive but are at the end on the WD 160gb. This shows when the drives are Defraged. Can anybody sort this out for me? I am doing this so that I have a backup drive incase of a terminal crash. Forgot, I am using a Intel 915gag w/P4@3.2 and W2000Pro with all updates.
View 1 Replies
View Related
Jan 1, 2005
I recently installed a new Seagate 120 GB hard drive as a slave. I also installed iTunes and am importing songs from my CD collection. Since doing this I am frequently getting a blue screen on Windows XP w/ Service Pack 2. It also seems as though my system is a little sluggish.
View 1 Replies
View Related
Sep 12, 2005
I'm trying to copy some files from my PC, but it doesn't recognize that I've got a dvd burner, it sees it only as a cd burner, it will play dvds, but wont let me erase or burn.My pc has started getting some bugs recently, and I need to hurry to backup my files, before it takes the big crash.
View 6 Replies
View Related
Jun 29, 2005
After working for sometime with Maxtor One Touch II external drive, I have experienced the following problem: If the computer is left for some period of inactivity, for 1-2 or more hours (the light on the drive is on and not blinking) I cannot access the drive and the OS message is "One touch is not responding". The only remedy is to restart the computer. My System consists of: WindowsXP SP2 and 512 MB Ram The Maxtor OneTouch II drive is connected via a firewire inlet of the computer, the file system being NTFS. The drive is partitioned unto 2 logical drives (~150 GB each)
View 3 Replies
View Related
Sep 29, 2007
I have Dell XPS w 2 hard drives. the master is 80gb(NTFS).."C" drive, and the slave is 120gb(FAT32)...."F" drivethe other day, after a re-start, Windows gave me the not so friendly message "Checking file system on F...the volume is dirty...windows is verifying files and folders.......0 percent complete"now, the problem is that it took 30 HOURS! before it completed its checkup! well, so before i panicked too much, i decided to buy an external drive to back up some stuff from the slave drive. after backing up about 20 gb worth of stuff, i re-started, and it did the same thing! tho this time it took "only" 18 HOURS to do its checking! it did say that "windows replaced bad clusters in files"
View 2 Replies
View Related
Oct 22, 2006
i connected my external HDD to my system i copied some data but now i'm not able to open that drive i have partitioned the 160GB drive to 8 20GB drives bcoz i have very important data in that drive
View 9 Replies
View Related
May 17, 2007
I've connected an external USB drive, but when I go to My Computer it shows it as a network drive. In addition, it gives it the same name as the mapped network drive that already exists there. When I change the name of the external drive there, it then changes the name of the mapped network drive, so again they both have the same name, although the drive letters are different. Any ideas how to make the external drive appear where it belongs in My Computer, under Hard Disk drives?
View 8 Replies
View Related
Feb 23, 2009
I turned the PC off to reboot when I though I was going into safe mode and went into regular mode instead. Now, it thinks one of my external drives is the C drive. On boot, I am getting a message that it cannot recognize find the system 32 windows config file (I'm paraphrasing).
I used the repair utility to get to the C prompt (which is pointed at the external drive) and checked the drive letters. I don't think the PC bios knows the hard drive is there.
I tried going into setup and reverting to factory installed configuration and that didn't change anything. I could not get it to recognize the hard drive.
View 2 Replies
View Related
Mar 16, 2005
I installed an a 2.5 Toshiba notebook drive in a external enclosure and I can't get XP to recognize it. The drive spins up and the light comes on to indicate it is running but nothing is shown in device manager or My computer. It also is not shown in disk management.I have uninstalled the the USB drivers through the device manager with no change after rebooting. The USB ports work fine with my other external drive.The drive was working fine in a notebook that had a
cracked screen. It is formated in NTFS. What else should I be looking at to solve this problem?
View 4 Replies
View Related
Apr 2, 2009
My sis has one of those Wally-Mart Acer mini laptops; NO CD-ROM drive in it (PS: way-bad idea! Never buy a computer w/o a dvd/cd drive in it!). She managed to delete the graphics card driver and so when that occurred and rebooted, nothing on-screen! Its there, you just cannot see anything in windows! And, because there is no drive, the CD with all the original programs cannot be run in start-up mode without an external CD-ROM drive
I want to use my (HP Pavilion zv6000 w/XP) laptop as that external drive to re-load her original CD, which (of course) has all the drives on it! At start-up, the Acer (also w/XP) has an option to start-up from an ext. drive, so it has that capability (obviously, w/o a drive of its own), but how to make my HP "look" like an external drive (via USB-to-USB hookup) is the problem!
View 3 Replies
View Related
Nov 10, 2008
When I finally finished creating a new Access Database from scratch on my 1 1/2 yr old Acer machine and went to save it to my thumb drive (G drive on the new machine) to transfer it to my wife's machine, I get the message "G is not accessable, access is denied". I had transferred a preliminary version just the day before to my wife's machine using the thumb drive which still works well in her machine.
View 2 Replies
View Related
Jun 25, 2005
I have a primary drive (maxtor) whice xp is running on and a second hard drive (maxtor also) which i have been using for some time for storing files. i had windows xp home and everything worked fine for a long while. recently since i upgraded to xp pro, the hard drive icon for the secondary drive disappears from my computer. i even tried saving stuff to the drive from ms word or something and it is not recognized. usually a restart will solve the problem, but after i let the computer run, (till like the next day) it will happen again. i dont know yet what event causes it to dissapear. i sometimes use standby, but i dont think that is consistent with the problem
View 4 Replies
View Related
