PC Doesn't Recognize Camera As External Drive
Sep 29, 2007
I'm struggling to connect my Sony Handycam DCR-SR42 to my Compaq Laptop, Windows XP.It works on other computers without a problem that's why I think it must be some setting in XP. I plug it in when prompted by installation software and the camera goes to :'preparing' Then immediately the windows found new hardware creen pops up. On the other computers that screen didn't come up and the camera would go straight into connecting' mode.I tried switching the 'found new hardware' off by disabling the plug and play in'services' with no luck.When I connect the camera while I'm starting up the laptop, it goes straight into 'connecting' mode but unfortunately that stops as soon as windows is started.I would like windows to detect my camera as a drive and not 'other devices
View 1 Replies
ADVERTISEMENT
Jan 20, 2009
Previously, my laptop did recognize the drive but for some reason it is now not finding it. I have plugged the drive into another computer and it is recognized. The laptop will recognize other devices which I plug into it. I have checked for viruses and have also tried restoring to an earlier time but no luck recognizing it
View 2 Replies
View Related
Aug 2, 2008
Well I have an hard drive into a external enclousure but the windows XP of a new CPU do not finish detect it when I connect it. But the same external hard drive work fine in my laptop. I formated my CPU 2 times, but i got the same error of Windows. My CPU has a new motherboard Foxconn M7VMX-K.
The USB ports work fine with my pendrive.
In my computer i can see a new hard drive with a letter (K, whithout data.
The Windows XP Administrator Disk doesn't show nothing about the external hard drive.
View 6 Replies
View Related
Jan 12, 2006
my XP SP2 doesn't recognize my Olympus FE-100. It installs it as "Unknown device". I have no problems this kind with my printer, mp3 player, but i had the same problem when trying to connect my friends watch which has usb memory in it (it works fine on his computer- XP). I tried to connect my camera on Win ME and it works properly. I know this has to do something with my XP, i just don't know what. I tried to uninstall- reinstall the camera, stop-restart the WIA but nothing helped. There is no driver for it because xp should recognize it at least as a storage device.
View 6 Replies
View Related
Mar 18, 2006
I'm connecting a 30GB Travelstar Hard Drive via an external USB 2.0 case to my Thinkpad T40 with Windows XP (pro). Windows immediately recognized it. However, the hard drive does not show up under Windows Explorer. I can go into Device Manager, click on Disk Drives, and it does show the new drive there (along with my main hard drive, which is a 80 GB hard drive).
I cannot figure out how to make it show up in Windows Explorer with an Drive Letter assigned to it and thus, how to actually use it.
View 6 Replies
View Related
Nov 24, 2007
I don't really understand it.I initially used G-parted to partition my 250gb drive into a 100, 75, and 55.Then I tried installing Windows XP SP3 and it says it doesn't recognize them, so I deleted those partitions and made new ones (the same size though) and it asked me to reboot. After I rebooted it prompted me again with Press Enter to install Windows, so I do and it says some crap about how it doesn't recognize any hard drive plugged in.BIOS recognizes the drive and its size.
View 14 Replies
View Related
Dec 5, 2006
I just replaced my old DVD ROM with a new DVD-RW drive. The system writes to the new drive fine (I have burned a couple of Video DVDs) but when I boot the system the Bios says it doesn't see the D: (CD) or E: (DVD) drive. Once I am into Windows XP I can also play CDs from the CR-RW drive but I can't use it to copy new software onto the system.
View 4 Replies
View Related
Aug 9, 2007
My brother went to My Computer one day and saw that there was no disc drive there, it was working in the past, but now it doesn't show up, I don't think he did anything unusual. But it shows up under Safely Remove Hardware Wizard with "Samsung CD Drive" or something like that.
View 14 Replies
View Related
Jul 10, 2005
I have an external USB 300GB Seagate drive that used to work fine.Then, periodically XP would not recognize when I turned it on. A re-boot would fix the problem. Now, XP won’t recongnize the drive at all. I get an "unknown device" error. I have a USB 2.0 card I plug the drive into, and all other devices in that card work fine. The device driver manager says all is well, except of course with the "unknown device" it notes, which is the external drive.
View 8 Replies
View Related
Aug 19, 2009
I am running XP Pro on my computer. On another drive I have windows 7. My computer stopped booting to my XP drive all of a sudden, but it would let me boot to my Windows 7 drive. That lasted for about 3 days. Now I can't boot to either drive. When I start the computer it says there is no HDD. I tried to use the XP disk to repair, that didn't work., so I thought I'd do an XP install. But my hard drive doesn't show up all the time. Or it will show the HDD but upon trying to pick a partition to set up XP in, it then tell me there is no HDD. I get the blue screen of death, and have to manually force a shut down. Other times it tell me that the HDD is RAW, and it needs to be formatted. How can I get the HDD to format? Is there a way to do it through DOS. Sometimes I can't even get to the DOS prompt. The bootup section is corrupt. I need to repair it, but can't if the system doesn't see my HDD.
View 8 Replies
View Related
Jul 26, 2005
I have a new samsun 120 GB hard drive that I have placed into two seperate external enclosures connected to my dell pentium 4 win XP computer via USB. My computer will not recognize the hard drive. It
powers up fine? Any ideas of what to do next?
View 5 Replies
View Related
Nov 1, 2007
my external hard drive all of a sudden stopped showing up in "my computer"
and a can't find it anywhere else. it make the hardware sound when I plug it in but nothing shows up. when I plug it in another port it comes up with a message saying "USb device not recognized. one of the usb device attached to this computer has malfunction and windows cannot recognize it
View 7 Replies
View Related
Sep 12, 2005
I'm trying to copy some files from my PC, but it doesn't recognize that I've got a dvd burner, it sees it only as a cd burner, it will play dvds, but wont let me erase or burn.My pc has started getting some bugs recently, and I need to hurry to backup my files, before it takes the big crash.
View 6 Replies
View Related
Jul 20, 2005
I added a 120 gig Western Digital USB external drive and used Acronis to create a backup of my hard drive. I then used Windows XP to remove it as a USB device so I could power it off. Now, when I power it back on it is not recognized by XP and does not appear on My Computer or on Disk Management (where I originally formatted it for NTFS). All I get is a sound like a single "KERPLONK" when I power it on.
View 3 Replies
View Related
Apr 29, 2008
My WD Passport doesn't display anything I have stored on it. It still says that there are things stored on the external drive, but when I click on the icon, nothing shows up.I have another WD that is working just fine.Also, the icon for the drive changed from the blue "WD" back to the default.
View 2 Replies
View Related
May 2, 2005
Suddenly, windows XP will not recognize my evision 123 digital camera. I tried another port but no luck. A message came up that refered to the cameria not having a signed logo?
View 1 Replies
View Related
Nov 12, 2005
I just purchased an LG GSA-2166D external DVD burner. It is a USB 2.0 and when I plug it into my Windows XP computer it does not recognize it as the correct drive. Initially the drive showed up correctly and I loaded the software that came with it, but started having problems so I uninstalled the software and must have deleted something I needed. It now just shows up as a DVD-RAM or CD ROM drive and will not see anything on the drive. It gives me errors when I try to access it.Any help on what I need to download and reinstall to make this work?
View 6 Replies
View Related
Apr 10, 2010
Earlier I formatted a PC with windows XP on it, the minute I plugged it up, a notification came up and said "This device can perform faster on a high speed 2.0 USB port". It says that when I plug them up into any USB port on the computer itself. The thing is, it will pretty much hang the system until I disconnect the external HD. It won't freeze 100%. It's responsive but no applications will open while it's trying to recognize the external.
It sounds to me like a USB driver problem or something because I'd assume it'd still recognize the drive even if it wasn't performing in a high speed 2.0 USB port... Any way to reinstall USB drivers? Never done that before. I have to use Hiren's Boot CD if I want to transfer files, simply because Windows XP won't recognize it and keeps popping up the notification.
View 4 Replies
View Related
Aug 19, 2008
I used my External Harddrive on a macintosh computer - no problem there. I just needed to copy some files from the ext. onto the mac - All Good...
Now my PC won't recognize the files on my ext. I have been reading support forums for the like, but I have not found a solution.
The Mac did not give me any warning that it was altering the file format or anything like that, but it apparently has.
Is there any way I can get my files recognized by my p.c.? Windows XP.
View 1 Replies
View Related
Dec 16, 2005
there are several things but lets attack one at a time. first of all when i run antivi iget this (C:DOCUME~1OWNER~1.STELOCALS~1TEMPAAWTMPC23656656222749SETUP.EXE) contains the signature of the worm WORM/AlcraB no matter how many times i delete it it comes back. next when trying to browse this blank mos-dod screen comes up with this message.
16bit MS-DOS subsystem
c:windowssystem32xg4.exe the NTVDM cpu has encountered an illegal instruction
C5:054d IP: 0126 OP C6 56 e4 16d/ choose close to terminate this program
and when we set up verizon dsl and the guy had us go to run cmd and try to ping the ip address we got this: "ping" is not reconized as an internal or external command, operable program or batch file and we tried several commands from this window and got the same message for all of them. and the guy at verizon said he was surprised that the pc was even running. well that's some of it got and recommendations other than total reformat?
View 14 Replies
View Related
Feb 26, 2008
- Taskbar has reverted back to the 98 style
- When I go to Start >> Search nothing happens
- Doesn't recognize the printer that's been installed for over a year
- Won't let me install another one
- System restore gives the error "System restore is not able to protect your computer. Please restart your computer, and then run System Restore again." and restarting does nothing.
View 8 Replies
View Related
Nov 5, 2007
I have an old Compaq Presario 5360 with Sis 7001 PCI to USB controller. This machine was working GOOD, I could work with my USB web cam, USB drive, USB digicam and others MP3 players.I have reinstalled my WinXP with Service Pack 2.0 and now I CAN'T use any USB device, when I connect my USB drive this device is not powered, XP doesn't notify me for anything. simply this PC looks not to have any USB controller.I have an DELL Notebook, I can use my USB devices on it.I just reinstalled the OS in the same way how I did it before. I think is something about drivers, the control panel (System devices) tells me everything is good and my USB controllers are working correctly.
View 12 Replies
View Related
Mar 1, 2005
My operating system, Windows XP, comes up with several error messages when I try to open up system files or programs that concern the "Computer Administrator". I then checked in the Control Panel to make sure that my name is in fact the admininstrator, and it is, to no suprise. But whenever I try to open these programs it either says this has been disabled by the administrator. The administrator has turned off this feature.
I don't know why this happens. I find out a way to fix it and then when I close it, it won't let me reopen it without fixing it again. Some programs that I have tried that don't work and give me this or a similar error message are, System Restore, Task Manager, Regedit, and Windows Update.
View 1 Replies
View Related
Aug 3, 2007
I have a multi-boot system set up and it Includes 3 OS's, Windows 7, XP, and a flavor of Linux. My XP installation does not recognize hardly any of the drivers for the hardware on my HP pavilion dv2941se laptop. Beings it doesn't have the driver for my network card i cant get online to search for other drivers.
View 2 Replies
View Related
Mar 3, 2006
I have a Windows XP home SP2 computer that has a Sony DVD RW DW-D22A that supposedly supports both -R and +R. Well I bought a stack of 100 Blank DVD-R and less than 1/2 way through the stack they turned into lousy DVD's. Both for DVD movies and data storage they wouldn't work. I would get this CRC check sum error message. I contacted the manufacturer and sent in a few samples and they replaced them - sent me two stacks of 50 - nice company. Well I just burned a data disc and my computer doesn't recognize anything being on the disc - I even get the "You have inserted a blank cd/dvd window" thing on my screen. I then tried to burn a dvd movie using a different program and that program doesn't even recognize a disc being in the drive (yes I did put in a fresh dvd before I started the program).
View 6 Replies
View Related
Sep 8, 2005
Just upgraded a old pc running win 98 to xp.Before I reformatted and installed the new os I made a backup of my 98 os and files using ms backup on a DVD. The file was about 3 gb and was verified by the backup program. It has the file extension .qic.The XP ms backup doesn't recognize the .qic format.Anyone know if I can install the 98 backup on XP or a freeware backup program to read my file?
View 8 Replies
View Related
May 26, 2006
I'm running XP SP2 home addition 32 running on AMD64 processor with 1G ram. Most times XP doesn't recognize my Canon i350 printer even though the PC beeps to acknowledge that the printer is on-line through a USB connector. I've reinstalled drivers more than once and even used Plug&Play. Also I don't have any other printer drivers installed. Canon i350 is set as my default printer. Each time the problem occures I can get XP to recognize the printer by either turning the printer off and on again (to easy) and if that fails re-booting sometimes more than once.
View 5 Replies
View Related
Aug 29, 2005
I have a USB MICR Reader (It is used for reading checks and credit cards) and i use the accessibilitiy option in control panel to enable serial key devices since the program has to go thru a virtual keyboard in order for the MICR Reader to communicate with the program and in the accessibility options you can only use com 1-4 since MS doesn't reconize anything above 4 for use as a serial device. Nedless to say i need to know how to change com ports in XP the device will take up to com port 18 but the serial devices above 4
View 1 Replies
View Related
Feb 18, 2008
I had my wedding pics placed on a CD by the photographer. When I place the CD in a pc running Vista, it pulls up all the pics just fine. When I place it in my home pc though, running XP, my pc acts like there isnt even a CD in the drive, like it doesnt recognize the CD is there at all
View 6 Replies
View Related
Nov 18, 2009
Tried opening a video file that was changed from MSWMM in Movie Make towmv.Previous files opened when I changed them to WMV. This iswhat I get when I try to open file: "Unrecognized format for 'D:Documents and Settings(name of file).wmv'".
View 4 Replies
View Related
May 9, 2005
I recently was forced to do a re-install of XP to clean up a few bugs.The system has 3 hard drives, but since the reinstall, only the C: drive appears. The other two are nowhere to be found.I've tried mapping to them, but they just don't show up there as a mapping option.Anyone have any advice? When I added the extra hard drives I didn't have an available slot and did have to create a partition. I no longer have the software I had originally used though. Do I need it to make the 2 other drives visable?
View 1 Replies
View Related
