Computer Doesn't Recognize Anything Being On The Disc
Mar 3, 2006
I have a Windows XP home SP2 computer that has a Sony DVD RW DW-D22A that supposedly supports both -R and +R. Well I bought a stack of 100 Blank DVD-R and less than 1/2 way through the stack they turned into lousy DVD's. Both for DVD movies and data storage they wouldn't work. I would get this CRC check sum error message. I contacted the manufacturer and sent in a few samples and they replaced them - sent me two stacks of 50 - nice company. Well I just burned a data disc and my computer doesn't recognize anything being on the disc - I even get the "You have inserted a blank cd/dvd window" thing on my screen. I then tried to burn a dvd movie using a different program and that program doesn't even recognize a disc being in the drive (yes I did put in a fresh dvd before I started the program).
View 6 Replies
ADVERTISEMENT
Mar 1, 2005
My operating system, Windows XP, comes up with several error messages when I try to open up system files or programs that concern the "Computer Administrator". I then checked in the Control Panel to make sure that my name is in fact the admininstrator, and it is, to no suprise. But whenever I try to open these programs it either says this has been disabled by the administrator. The administrator has turned off this feature.
I don't know why this happens. I find out a way to fix it and then when I close it, it won't let me reopen it without fixing it again. Some programs that I have tried that don't work and give me this or a similar error message are, System Restore, Task Manager, Regedit, and Windows Update.
View 1 Replies
View Related
Aug 9, 2007
My brother went to My Computer one day and saw that there was no disc drive there, it was working in the past, but now it doesn't show up, I don't think he did anything unusual. But it shows up under Safely Remove Hardware Wizard with "Samsung CD Drive" or something like that.
View 14 Replies
View Related
Aug 19, 2009
I am running XP Pro on my computer. On another drive I have windows 7. My computer stopped booting to my XP drive all of a sudden, but it would let me boot to my Windows 7 drive. That lasted for about 3 days. Now I can't boot to either drive. When I start the computer it says there is no HDD. I tried to use the XP disk to repair, that didn't work., so I thought I'd do an XP install. But my hard drive doesn't show up all the time. Or it will show the HDD but upon trying to pick a partition to set up XP in, it then tell me there is no HDD. I get the blue screen of death, and have to manually force a shut down. Other times it tell me that the HDD is RAW, and it needs to be formatted. How can I get the HDD to format? Is there a way to do it through DOS. Sometimes I can't even get to the DOS prompt. The bootup section is corrupt. I need to repair it, but can't if the system doesn't see my HDD.
View 8 Replies
View Related
May 9, 2005
I recently was forced to do a re-install of XP to clean up a few bugs.The system has 3 hard drives, but since the reinstall, only the C: drive appears. The other two are nowhere to be found.I've tried mapping to them, but they just don't show up there as a mapping option.Anyone have any advice? When I added the extra hard drives I didn't have an available slot and did have to create a partition. I no longer have the software I had originally used though. Do I need it to make the 2 other drives visable?
View 1 Replies
View Related
Jan 6, 2008
I keep getting this error "One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it". And if I leave my PC on to long the keyboard, mouse, and sometimes even the monitor stop working. I've tried unplugging the keyboard and mouse (which are not USB) and plugging them back in, but to no avail.
View 8 Replies
View Related
May 8, 2010
neither wmp 11 or roxio recognizes a blank disc. when i try to burn a disc (dvd or cd) both wmp 11 and roxio tells me to insert a blank disc. i have tried putting a disc in first, or wait for the program to tell me to insert disc but neither way works!:
View 9 Replies
View Related
Nov 15, 2009
i have a labtec web cam with software but i have a dell mini and have no where to insert the disc, please help
View 1 Replies
View Related
Feb 26, 2008
- Taskbar has reverted back to the 98 style
- When I go to Start >> Search nothing happens
- Doesn't recognize the printer that's been installed for over a year
- Won't let me install another one
- System restore gives the error "System restore is not able to protect your computer. Please restart your computer, and then run System Restore again." and restarting does nothing.
View 8 Replies
View Related
Nov 5, 2007
I have an old Compaq Presario 5360 with Sis 7001 PCI to USB controller. This machine was working GOOD, I could work with my USB web cam, USB drive, USB digicam and others MP3 players.I have reinstalled my WinXP with Service Pack 2.0 and now I CAN'T use any USB device, when I connect my USB drive this device is not powered, XP doesn't notify me for anything. simply this PC looks not to have any USB controller.I have an DELL Notebook, I can use my USB devices on it.I just reinstalled the OS in the same way how I did it before. I think is something about drivers, the control panel (System devices) tells me everything is good and my USB controllers are working correctly.
View 12 Replies
View Related
Nov 24, 2007
I don't really understand it.I initially used G-parted to partition my 250gb drive into a 100, 75, and 55.Then I tried installing Windows XP SP3 and it says it doesn't recognize them, so I deleted those partitions and made new ones (the same size though) and it asked me to reboot. After I rebooted it prompted me again with Press Enter to install Windows, so I do and it says some crap about how it doesn't recognize any hard drive plugged in.BIOS recognizes the drive and its size.
View 14 Replies
View Related
Dec 5, 2006
I just replaced my old DVD ROM with a new DVD-RW drive. The system writes to the new drive fine (I have burned a couple of Video DVDs) but when I boot the system the Bios says it doesn't see the D: (CD) or E: (DVD) drive. Once I am into Windows XP I can also play CDs from the CR-RW drive but I can't use it to copy new software onto the system.
View 4 Replies
View Related
Aug 3, 2007
I have a multi-boot system set up and it Includes 3 OS's, Windows 7, XP, and a flavor of Linux. My XP installation does not recognize hardly any of the drivers for the hardware on my HP pavilion dv2941se laptop. Beings it doesn't have the driver for my network card i cant get online to search for other drivers.
View 2 Replies
View Related
Sep 8, 2005
Just upgraded a old pc running win 98 to xp.Before I reformatted and installed the new os I made a backup of my 98 os and files using ms backup on a DVD. The file was about 3 gb and was verified by the backup program. It has the file extension .qic.The XP ms backup doesn't recognize the .qic format.Anyone know if I can install the 98 backup on XP or a freeware backup program to read my file?
View 8 Replies
View Related
Sep 29, 2007
I'm struggling to connect my Sony Handycam DCR-SR42 to my Compaq Laptop, Windows XP.It works on other computers without a problem that's why I think it must be some setting in XP. I plug it in when prompted by installation software and the camera goes to :'preparing' Then immediately the windows found new hardware creen pops up. On the other computers that screen didn't come up and the camera would go straight into connecting' mode.I tried switching the 'found new hardware' off by disabling the plug and play in'services' with no luck.When I connect the camera while I'm starting up the laptop, it goes straight into 'connecting' mode but unfortunately that stops as soon as windows is started.I would like windows to detect my camera as a drive and not 'other devices
View 1 Replies
View Related
May 26, 2006
I'm running XP SP2 home addition 32 running on AMD64 processor with 1G ram. Most times XP doesn't recognize my Canon i350 printer even though the PC beeps to acknowledge that the printer is on-line through a USB connector. I've reinstalled drivers more than once and even used Plug&Play. Also I don't have any other printer drivers installed. Canon i350 is set as my default printer. Each time the problem occures I can get XP to recognize the printer by either turning the printer off and on again (to easy) and if that fails re-booting sometimes more than once.
View 5 Replies
View Related
Aug 29, 2005
I have a USB MICR Reader (It is used for reading checks and credit cards) and i use the accessibilitiy option in control panel to enable serial key devices since the program has to go thru a virtual keyboard in order for the MICR Reader to communicate with the program and in the accessibility options you can only use com 1-4 since MS doesn't reconize anything above 4 for use as a serial device. Nedless to say i need to know how to change com ports in XP the device will take up to com port 18 but the serial devices above 4
View 1 Replies
View Related
Feb 18, 2008
I had my wedding pics placed on a CD by the photographer. When I place the CD in a pc running Vista, it pulls up all the pics just fine. When I place it in my home pc though, running XP, my pc acts like there isnt even a CD in the drive, like it doesnt recognize the CD is there at all
View 6 Replies
View Related
Jan 12, 2006
my XP SP2 doesn't recognize my Olympus FE-100. It installs it as "Unknown device". I have no problems this kind with my printer, mp3 player, but i had the same problem when trying to connect my friends watch which has usb memory in it (it works fine on his computer- XP). I tried to connect my camera on Win ME and it works properly. I know this has to do something with my XP, i just don't know what. I tried to uninstall- reinstall the camera, stop-restart the WIA but nothing helped. There is no driver for it because xp should recognize it at least as a storage device.
View 6 Replies
View Related
Jan 20, 2009
Previously, my laptop did recognize the drive but for some reason it is now not finding it. I have plugged the drive into another computer and it is recognized. The laptop will recognize other devices which I plug into it. I have checked for viruses and have also tried restoring to an earlier time but no luck recognizing it
View 2 Replies
View Related
Nov 18, 2009
Tried opening a video file that was changed from MSWMM in Movie Make towmv.Previous files opened when I changed them to WMV. This iswhat I get when I try to open file: "Unrecognized format for 'D:Documents and Settings(name of file).wmv'".
View 4 Replies
View Related
Dec 7, 2008
Every music folder in My Music after C (cameo!) has disapeared although I know they are still there - i can still play them in itunes and even open the song folder but if I copy it and drop it back into My Music it vanishes. Windows doesn't even recognise the memory that the missing files use and thinks the folder holds 3 gigs when its more like 30. Just wondering if there is anything I can try before going through the hassle of reformating.
View 9 Replies
View Related
Aug 5, 2009
I've got this old mobo Abit VT7. I want to install XP on it. However, the XP disc doesn't recognize SATA hard drives. So I downloaded official SATA driver from the Abit website http://tinyurl.com/kua5qz and tries to slipstream my XP disc following the instructions set forth here http://tinyurl.com/37anvn . I am not too clear how to incorporate the drivers from the official drivers, but Nlite seems to be able to find the drivers once I pointed it to the top unzipped driver directory, and I selected the XP folder for it. However, the newly created XP disc still fails to recognize the SATA hard drives. Alternatively, I believe I could have a boot floppy which would load the drivers in, then I launch the setup in the XP installation CD via command line. But I don't know how to create a boot disc which has those SATA drivers in.
View 6 Replies
View Related
Aug 2, 2008
Well I have an hard drive into a external enclousure but the windows XP of a new CPU do not finish detect it when I connect it. But the same external hard drive work fine in my laptop. I formated my CPU 2 times, but i got the same error of Windows. My CPU has a new motherboard Foxconn M7VMX-K.
The USB ports work fine with my pendrive.
In my computer i can see a new hard drive with a letter (K, whithout data.
The Windows XP Administrator Disk doesn't show nothing about the external hard drive.
View 6 Replies
View Related
Nov 29, 2009
Since XP Pro original doesn't recognize SATA HDs, is it workable to create a install CD using Original XP Pro CD and add in SP1a and slip-stream them together on a new machine having SATA HD?Will this allow XP to recognize the HD and use it well?Similarly, same idea regarding XP HD size limit of 127 Gigs pre SP1a?
Current HDs are so large.How to create such disk ((Tutorial link)?
View 7 Replies
View Related
Dec 5, 2006
I have an old T1090 eMachine that doesn't recognize the new larger hard drives. I purchased a 200 GB PATA (IDE) drive and it shows up as a 75 GB drive using GParted and under Windows Disk Management. I expected that it would only be recognized as 137 GB, but I can't explain why it only sees 75 GB. I suspect that the BIOS needs to be updated, but I've never done this before so I was looking for a procedure and ideas for trying to find the latest BIOS online.
View 8 Replies
View Related
Jul 25, 2008
Trying to fix my friends computer thought I would be done in an hour or so but I ran into a retarded problem when trying to boot from the windows cd. Here is some information I know off the top of my head. If you have any input please let me know, I'm trying to get this done before tonight since its Friday
View 9 Replies
View Related
Nov 28, 2007
After putting the windows XP CD in and rebooting, now whenever the computer is restarted I get the blue screen that says unable to find disc press F3 to exit setup. How do I stop this so computer will reboot normally?
View 6 Replies
View Related
Sep 12, 2005
I'm trying to copy some files from my PC, but it doesn't recognize that I've got a dvd burner, it sees it only as a cd burner, it will play dvds, but wont let me erase or burn.My pc has started getting some bugs recently, and I need to hurry to backup my files, before it takes the big crash.
View 6 Replies
View Related
Jun 30, 2005
Ok guys my problem is also involved with video games. I tried to install Steam (a program that runs Sierra games such as Counter-Strike) but when i try to install it this thing pops up "You do not have access to make the required system configuration modifications. Please return this installation from an administrators account." Ok guys I also tried to install this game "World Of Warcraft." I tried to install both these games but the computer keeps blocking! When i try to insteall Steam that note pops up (see above). When i try to install World Of Warcraft, the nstallation bar stops and remains at the middle. I left it installing for the whole night last night. When i woke up the bar is still at the middle , like 50%. Ok so anyway, all of this is because of the Administrator access problem. I have checked other topics that relates to this problem but it didn't solve my problem
View 2 Replies
View Related
Jul 30, 2010
i have always been the administrator on my computer. now it does not recognize me as that...actually it doesn't show anyone as the adminisrator. it shows my account as limited
View 1 Replies
View Related
