Installation Operating System - Disc Fails To Recognize SATA Hard Drives
Aug 5, 2009
I've got this old mobo Abit VT7. I want to install XP on it. However, the XP disc doesn't recognize SATA hard drives. So I downloaded official SATA driver from the Abit website http://tinyurl.com/kua5qz and tries to slipstream my XP disc following the instructions set forth here http://tinyurl.com/37anvn . I am not too clear how to incorporate the drivers from the official drivers, but Nlite seems to be able to find the drivers once I pointed it to the top unzipped driver directory, and I selected the XP folder for it. However, the newly created XP disc still fails to recognize the SATA hard drives. Alternatively, I believe I could have a boot floppy which would load the drivers in, then I launch the setup in the XP installation CD via command line. But I don't know how to create a boot disc which has those SATA drivers in.
I have an HP Media PC M400Y. It is a P4 3.0 Ghz with 1GB ram. It originally came with MCE2002. Last week I upgraded to MCE2005 to use the media extender feature with my new X-box 360. Here is the problem and some background.
About a year ago, I had installed a second SATA hard drive, Seagate Baracuda 300GB, model ST3300831AS. This drive was plug and play into the motherboard and never had any issues. Before reformating the main C: drive, I moved all my valuable data on the SATA drive.
I then turned the PC off, removed the power and signal cables from the SATA drive. (I'm a novice, and didn't want to take any chances of erasing the SATA drive, while reformating the main C drive)
i have 2 HDD one with the os and the other one for data.I reformatted my data drive by deleting and re-creating partition via windows xp boot cd. Afterwards it went through the whole windows instillation thing.How can i reformat this drive without installing windows xp afterwards?
I just built my first computer (specs in signature) with a SATA hard drive. I put the windows XP Pro CD and it formatted my Hard drive the it installed windows, but it says that windows could not start due to a hardware configuration problem. Is there some special thing I need to set to get it to boot from the drive or what?
i have a p5s800-vm mother board of asus and the setup of windows xp (pro-sp2) dont find my hard disc and i need to make a floopy from the drivers on the disc to help it found the hard disc. that what i do to make that floopy (as some nice guys here tell me to) i go to the drivers folder on the disc of the motherbord than chose "raid" folder in it i chose the floopyimage folder there i have 3 folders
1.964plus180(181) 2.964_180 3.965_965L
the guys here tell me to put the files of the 965_965L on the floopy without the foler imself. so in the 965_965L folder i have two files "SISRAID and "TXTSETUP.OEM" and aonter folder calld "raid" and in it i have to folders "winxp" and "win2000" and each folder has its own file. so what i do was to put only the "TXTSETUP.OEM" file on the floopy without noting else cause someone here tell me it all i need to do......
I have a computer at home with two identical 160 GB WD SATAII drives in it and I want a copy of XP on each drive. The first drive (Which I have been using as my gaming computer) has already got XP installed and I want to keep it pretty much free of anything but games so it won't affect performance. On the second drive, I would like to install another copy of XP and use this drive for my common use and with the primary intent of using it for a HDTV capture device. I've researched it for a while and have almost only been able to find information concerning dual booting with IDE drives using a jumper switching device so you don't have to dismantle the computer every time you switch drives.
I want to install Windows XP on a new SATA HDD drive. The computer in question came with Windows Vista installed. There is no IDE option in the BIOS. There is no floppy drive on the unit. So it looks like I might have to slipstream all the drivers, etc., on to the unit (which I have no clue how to do). I do not have the motherboard make or model number, nor do I have the motherboard CD. My business partner is trying to take the cover off the laptop as we speak, but we're having trouble getting it off. Thus, as of now, we can't identify the motherboard manufacturer or the serial number.
Can anyone here point us in the right direction? The computer in question is a Compaq Presario c769us (laptop). It was purchased in June 2008. This all started when my business partner decided to use a Vista System Recovery CD to overwrite the existing copy of Vista that he had on the computer. After he ran the disk, the system stopped working. So right now, we have the old hard drive, which contains a non-working copy of Vista on it (which we can 't delete), and we have the new hard drive (a 250 GB Hitachi). So maybe we could just delete the copy of Vista on the old hard drive - the self drive test checked out okay on the old hard drive. So I guess the two options are - figure out a way to put XP on the NEW hard drive, or figure out a way to put XP on the OLD hard drive and delete Vista from it first. If we can put XP on the old hard drive and remove Vista from it, we could take the new hard drive back, and get our money back, too.
I have a computer running Windows XP PRO SP2 with 2, 250gb hard drives. The operating system and programs are on the C drive and the second drive which is removable is supposed to be for my data, but Windows doesn't recognize it so I can't use it. Right now I have my data on an external hard drive, connected by USB.
The second hard drive is new from my manufacturer (I have a custom computer and this is a replacement hard drive--the original was faulty) and I haven't put anything on it yet. When I first put it in my machine, I was able to see it in "My Computer". The next day when I was ready to start copying my data over, it was nowhere to be found. I turned off the machine, pulled out the drive and put it back and rebooted--still no show.
Used to use Barts PE on a Windows XP system that had IDE drives. Created a new one since I was getting an error on my new Dell System with Windows XP PRO. Said it could not find a certain .in file. So I created a new Barts PE using a Windows XP Pro CD with SP1 and a blank CD to write the ISO image. After rebooting with Barts PE CD with ISO image, it looked fine and booted okay into Barts PE---BUT---it could not see my hard drives.
I recently was forced to do a re-install of XP to clean up a few bugs.The system has 3 hard drives, but since the reinstall, only the C: drive appears. The other two are nowhere to be found.I've tried mapping to them, but they just don't show up there as a mapping option.Anyone have any advice? When I added the extra hard drives I didn't have an available slot and did have to create a partition. I no longer have the software I had originally used though. Do I need it to make the 2 other drives visable?
I have an old T1090 eMachine that doesn't recognize the new larger hard drives. I purchased a 200 GB PATA (IDE) drive and it shows up as a 75 GB drive using GParted and under Windows Disk Management. I expected that it would only be recognized as 137 GB, but I can't explain why it only sees 75 GB. I suspect that the BIOS needs to be updated, but I've never done this before so I was looking for a procedure and ideas for trying to find the latest BIOS online.
I'm can't get WinXP installation to find my Sata Hard-drive. I'm running Suse Linux on my IDE-HD and I could also had no problems getting my Suse 10.1 installation to install on the SATA-HD. I've booted up with winxp media install disk and tried to use the F6 key at the right time but nothing happens so it keeps going until I get to the point where I can press the S key to install SATA RAID driver from disk that came with my motherboard. The drivers install but then windows install still says no disk to install windows... I don't get it.
I've checked my bios and SATA in there, in fact the first thing I see when I boot up in the boot sequence is the SATA drive. Linux knows it's there but windows install doesn't. I installed XP on a WD SATA drive before and all I had to do was press F6 to install the controller from the XP disk but that doesn't work now.
computer failed to reboot. I used a boot disk to get started. I then noticed that the system does not recognize the drives C (where my Windows XP OS is installed) or D drive which is a seperate physical drive for my data.
I installed windows service pack 1 for windows xp and now my cd and dvd drives aren't recognized and I lost sound in my speakers. I got a code 39 error. The fix in windows support is useless
neither wmp 11 or roxio recognizes a blank disc. when i try to burn a disc (dvd or cd) both wmp 11 and roxio tells me to insert a blank disc. i have tried putting a disc in first, or wait for the program to tell me to insert disc but neither way works!:
The Dell 8250 Pentium IV computer will not recognize the new master 160 GHZ or the origional, now slave, 40 GHZ, Hard drives. All the connections and jumpers are installed correctly. I tried a new motherboard and a new cable, both did not resolve this problem. Even ran a diagnostic program called "Tuff Test", running at boot up and the RAM and all other items checked OK, showing all working properly. The BIOS, now set to boot up correctly, off the proper drive, seems to recognize both removable drives and the floppy, but not the hard drives. When I received the computer it was password protected. after asking and waiting for a week, with no response, I therefore, in safe mode,entered the BIOS and chose for it to boot off of the CD Rw that I thought was the proper and shut the Hard Drive off. Here the CD RW was a slave and not the master. No luck in installing the OS. I bought a new 160 GHZ HD with the thought that I could load the OS, again no luck. I replaced the battery and tried again with no luck.
Should I ever use one of the utility programs to wipe my hard drive completely, how do I reinstall Windows XP since the CD driver has been erased? How can you reinstall an operating system that is on CD when you have no driver for the CD player? The reason I am asking these questions is that I might want to give my computer to friend and I want my stuff off of the hard drive and my friend to be able to use the computer.
When i turn my laptop on it says no operating system i have no master disc for it and i have no master disc for my pc is there any way i can put it on disc
Laptop new online so it came with Windows XP sp2 already installed. That I recall, it did not come with a disc or any included software. I've been having some major problems with my computer as of late and I'd just love to wipe the whole darn thing clean and reinstall everything, but I'm not sure if that's even an option if I don't have a disc. What other options do I have?
I desperately need my laptop to work and I've run into this grave problem. When I came home today, my laptop wouldn't start properly and it would say "No Operating System Found" on a black screen after seemingly trying to load for a while. The laptop had a weird whirring sound that wasn't present before. I have a Sony VAIO PCG-K23.
I need to wipe clean the hard disc on a desktop. It currently has XP-Home installed, which was an upgrade from ME. The ME files were erased from the desktop after installation of XP. After formatting I assume I will need an MS-DOS bootup disc to install ME; install ME and then upgrade to XP-Home. If my assumptions are correct how can I create a bootup disc for ME? I am hoping that someone has a simpler method than I have outlined.
When I purchased my lap top from Dell 2.5 years ago I made a backup OS CD. The computer did not come with the xp disc. I need to re-install the OS now-computer is slow, sluggish and just acting down right weird. I know its time, so as I gathered up the gutts to do this but when I popped in the cd and began the process it asked for the key number. I dont have that because I made the disc. I just followed the directions when I bought the computer. Now what do i do? I would rather purchase and upgrade to vista but when I ran the program to see if I could, there were some issues, plus its getting old and needs more memory, ram etc. Sooo this is the next best thing untill I breakdown and get a new PC.
I have WIN XP PRO SP2 on my system. I have a 120G Harddrive. is it possible to reformst to a dual partition, 50% WIN 98 SE FAT the other half XP NTFS ? I dont have my original XP disk So I dont know if I will be able to reinstall my XP off of my backup disc.
I'm connecting a 30GB Travelstar Hard Drive via an external USB 2.0 case to my Thinkpad T40 with Windows XP (pro). Windows immediately recognized it. However, the hard drive does not show up under Windows Explorer. I can go into Device Manager, click on Disk Drives, and it does show the new drive there (along with my main hard drive, which is a 80 GB hard drive).
I cannot figure out how to make it show up in Windows Explorer with an Drive Letter assigned to it and thus, how to actually use it.
I have a 2 hard disc system, Windows XP pro and most programmes run from the C Drive. A few, plus all my data run from the F drive. Over the last few days I have encountered a massive slowdown in getting the computer started - form certainly less than 5 minutes to over 20 minutes. I have not added anything to the autoruns at all.
Programmes and data (eg music) run fine if they are on the F drive, but if they are on the C drive they run incredibly slowly so music is fragmented and at times its like trying to wade through treacle to get anything done. I have been getting crashes of the PC with a message about a kernel problem... but haven't yet copied all the data from that to get the detail. When it crashes the next boot reports a disc boot system failure, when i reboot ahgain it loads up but painfully slowly. The C drive was defraggged just afew weeks ago. I'm thinking the drive is about to pack up....
At first I thought it was BIOS not autodetecting my HDrive capacity. But in the setup screen it indicates the correct size.However, in WindowsXP-My Computer, it still says my harddrive is 20GB rather than 40GB.
my hard drive was going bad so i bought a new one. With my old hard drive still connected to my computer, i installed my new hard drive, and formatted windows xp on it. Everything was running well, until i removed my old hard drive from my computer and whenever i boot up my computer with my new hard drive, i get an error saying "No device found, please insert a boot disk and press any key". the only way i could boot into windows xp of my new hard drive is by a boot disk i created from another computer. Is there any way that i can boot into XP without always having to use a boot disk?
I have recently bought a new computer that came with windows vista as you may have guessed the experience mostly has not been a good one, with lots of compatibility issues. I want to dual boot Vista with XP but the problem is I have heard windows XP does not have the SATA drivers on the disc. I understand that you just need to insert a floppy and push F6 I think but the problem is I don't have a floppy drive! Is there anyway I can slipstream the drivers into the install or something?
He took it home tonight because its being playing up over the past week and yesterday it refused to boot xp. He tried the recovery console himself and im not sure what he did but upon starting the computer up xp immediately jumps into "reinstalling windows" at the install stage. It gets down to 33 minutes and the computer restarts and repeats the whole process. I cant format the drive as theres important work on it and im not going to be able to take my computer home till next weekend. I was hoping someone could offer an alternative solution to a format?
I recently bought a new computer and had windows XP installed as well as having Norton AntiVirus program installed (came with a package). Now, when I try installing a HP printer the installation CD does not work but when I try it on my laptop it does work. Could it be the norton blocking the CD installation? What would I have to do in order to fix this problem.
