Two Hard Disc System - Crashes Boot Reports System Failure
Jul 17, 2005
I have a 2 hard disc system, Windows XP pro and most programmes run from the C Drive. A few, plus all my data run from the F drive. Over the last few days I have encountered a massive slowdown in getting the computer started - form certainly less than 5 minutes to over 20 minutes. I have not added anything to the autoruns at all.
Programmes and data (eg music) run fine if they are on the F drive, but if they are on the C drive they run incredibly slowly so music is fragmented and at times its like trying to wade through treacle to get anything done. I have been getting crashes of the PC with a message about a kernel problem... but haven't yet copied all the data from that to get the detail. When it crashes the next boot reports a disc boot system failure, when i reboot ahgain it loads up but painfully slowly. The C drive was defraggged just afew weeks ago. I'm thinking the drive is about to pack up....
I am using Windows XP Home OS. I have formatted a CD-R disc using Direct CD format utility. When I try to create a new folder on this CD and rename it after the "new folder" appears, the system crashes and reboots itself. I have been able to do this without any problem before and this has suddenly just occurred. I can't be sure if this is the first time I have tried this since updating to SP2. Can this be a problem with Windows Explorer?
I have a dwsktop vaio When I boot from cold it does not find hard drive. I get an error message Disk boot failure Insert system disk and press enter. If I restart the computer and go into the bios it does not show the hard drive but when I come out of the bios it then boots up.It will only bootup if I go into the bios first?
first i get the HP blue screen. I tried F1, but i dont see my hard drive in the boot menu. I followed some steps in Hp's web site- took the cpu apart and unplugged both hard drives from the motherboard, plugged them back in. when i restarted ,i got the HP screen and then windows started to load up. After a few seconds the HP screen came back up and then the black screen: sk boot failure, insert system disk and press enter. I also noticed that pressing F10 for system recovery does nothing.
hey anyone remember that boot disc that had everything and it also had a mouse function in it? it was like boot magic or something i cant really remember. I only remember it had 2 versions one was the floppy which was free and the other you had to pay for the cd version
computer failed to reboot. I used a boot disk to get started. I then noticed that the system does not recognize the drives C (where my Windows XP OS is installed) or D drive which is a seperate physical drive for my data.
I need to wipe clean the hard disc on a desktop. It currently has XP-Home installed, which was an upgrade from ME. The ME files were erased from the desktop after installation of XP. After formatting I assume I will need an MS-DOS bootup disc to install ME; install ME and then upgrade to XP-Home. If my assumptions are correct how can I create a bootup disc for ME? I am hoping that someone has a simpler method than I have outlined.
I am trying to slipstream XP Pro & SP2 I did it all according to plan, the disc burned with no errors but it will not boot the system. When I look at the disc it looks like an ordinary XP disc, but when I put it in system it says PRESS ANY KEY TO REBOOT. Am I missing something, I did it last year with no problems; also I can�t remember how to put the key in automatically.
i am getting a Boot Failure message on my computer when I start it up. It seems like it is trying to boot from the various devices, Then I receive the Boot Failure message.
when i open a folder e.g. My Documents, My Computer... a little while later i get this message...and yeah, so i press 'Don't Send' most of the time then after that i can't minimize my browsers and other windows by pressing the task bar, i had to press the minimize button on the window T__T. i have selected the 'Send Error Report' and the 'Debug' option before but i have no idea what's really happening after that...
I've got this old mobo Abit VT7. I want to install XP on it. However, the XP disc doesn't recognize SATA hard drives. So I downloaded official SATA driver from the Abit website http://tinyurl.com/kua5qz and tries to slipstream my XP disc following the instructions set forth here http://tinyurl.com/37anvn . I am not too clear how to incorporate the drivers from the official drivers, but Nlite seems to be able to find the drivers once I pointed it to the top unzipped driver directory, and I selected the XP folder for it. However, the newly created XP disc still fails to recognize the SATA hard drives. Alternatively, I believe I could have a boot floppy which would load the drivers in, then I launch the setup in the XP installation CD via command line. But I don't know how to create a boot disc which has those SATA drivers in.
After running a defragmentation, I received a message that 6 mb of system 32 did not defrag. the system ran, closed, then when booted up the next day I received the windows 32 error. I have an OEM windows xp installed in the computer, a pentium III gateway, and i understand that common recovery proceedures cannot be used with success, because the OEM versions have embedded passwords and such. I have not heard strange sounds from my hard drive, previous to , and subsiquent to the problem. I wish to run chkdsk,to see if this can resolve the problem, if the OEM version will allow it. Is this possible, and the fact that I have a D drive slaved to the c drive matter?
I went into BIOS and I found that my PC hard disk C & E are set as preimary disk both. Then the DVD-CD rom was set as escondary disk.So I try to make changes and when I start PC, Boot failure: System became Halted.What can I do? As a mtter of facts that why when I try to update WXP SP1 to SP2, the last one kick out disk E.
I am receiving the following error at startup: "Disk boot failure, insert system disk and press enter" There are no CD's in the CD drive. However, I ran the System Diagnostics and when it got to the Disk section - it is not recognizing the disk - it said Warning...and to check the cables. I have done that, and everything seems to be connected correctly.
My computer crashed about a month ago and I had to use a recovery disc to restore my original system.. Everything works fine except when I boot up and following the Sony logo and Intel logo the following message appears "Press F11 for Acronis Startup Recovery Manager. Acronis fatal error Boot drive (partition) not found. Press Enter to try to boot your PC." Pressing enter boots up the PC fine but how can I eliminate the process? I had Acronis on both drives before the crash but it no longer exists.
My Laptop running on windows XP Home just fails to boot up. It also does not start in the Safe Mode, (system freezes).When I tried to boot using the Recovery CD, the system just shuts itself down. If I try using the CD to boot, it simply shuts down after a few minutes.
I have just recently gotten a new computer which came with Vista. Previously what I have done with any new operating system I got was installed it into my old computer. However, I came to find out you can only have one computer assigned to each cd, unless I wanna buy another one, which is unecessary. I wanted to get rid of Vista and return to XP but the XP disc would not install because of multiple errors, such as missing ntldr.
I had a hard drive failure, and have a full copy of the hard disk which contains the operating system. However, when I copy this in its entirety to a new hard drive, that hard drive does not boot.
The bios just states "No Operating System".
Is it actually possible to do what I am trying to do? That is, to reinstate the operating system from a backup CD?
My laptop, which was my dad's old office laptop, recently crashed. One day when I turned it on, a blue screen popped up and said there were a corrupt file or something. So I decided to reformat using a Windows XP cd, and for some reason it kept getting stuck on 91%, so I just left it on and it eventually hit 100% and completed.After everything was done, I turned it back and after the first Dell Screen bootup, the screen goes blank for 30 seconds, then a a line of white vertical lines show up at the bottom, looking at though something is loading, and it eventually finishes after a minute or two.Next the XP Bootup Screen comes up, and begins to load, but then the screen goes blank again.
Getting error message when trying to change out a 10 gig to a 250.NVIDIA Boot Agent 201.0462 PXE-E61: Media Test Failure, check cable PXE-M0F: Exiting NVIDIA Boot Agent DISK BOOT FAILUR, INSERT SYSTEM DISK AND PRESS ENTER" this drive I am upgrading also has Windows XP OS. I have another drive on the computer that has 160g.
I did a new hard drive install. When the new HD was complete I thought I would copy the data from the old drive to the new.They both still had os installed They were both connected to the system at the same time.When I finished, I removed the old drive. The new drive wouldn't boot. "Disk boot failure, insert system disk and press enter". After recovery disk completed, the system booted fine. I could reboot from the shutdown option.
The problem I have is when the system is shutdown completely. It requires the system disk again. It will reboot after the system disk is reinstalled. I continually get the "Disk boot failure, insert system disk and press enter" error message.During bootup after a shutdown, I can F2 into the bios before the error message. It will allow me to exit and then windows will boot without the error message.
I have a Sony Vaio VGN NR160 E which came with Vista Home Premium. Actually it's crashing repeatedly because of an outdate touch pad driver "apfiltr.sys". But I have not been able to find a newer updated version for the same! So I am thinking of reverting back to Win XP.
I Have just installed a Maxtor SATA 200 GB hard drive in my computer.Partition Magic reads this drive at slightly over 200 GB, but WindowsXP reports it as 193GB. What gives?
a friend asked me to install a new hard drive for him because his crashed. So i purchased a new hard drive (maxtor 60 gb) set out to partition and format the drive, using a win 98 boot disk. I partitoned the drive ( for large volume drive.) Formatted the drive ( format c: /s ) to include system files.and proceeded with Os install Windows 2000. Everything went as smooth as silk... the when install finished, I was prompted to remove the disk from cd rom and complete installation with the onscreen prompt. I removed disk, clicked finish and the computer rebooted upon loading, when it went to start windows it said DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
I put the Win 2K disc back in and hit enter. It started windows perfectly no errors at all... then I took disk out re-started ( to check system stability) and back to the same error message: DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. I of course freaked out, I feel like an idiot cause I cant get this thing to work right. tried reformatting without the sytem files, re-partioning tried win 98, winXP, nothing same stuff! So I talked to a pal got a hard drive wipe program off the net "killdisk", wiped the drive and tried to reinstall Win 2K, same problem.
applications were running slow, having problems closing etc. I expected a virus problem, but NIS 2005 did not detect any viruses. This morning I attempted to boot the machine as usual, and I found that windows would not boot after repeated attempts in any mode. I borrowed a friends windows XP cd, i dont have mine on hand, and attempted to repair the installation. However, when it tried to copy files to the hard drive it said that it could not detect it.
Naturally, seeing this i assumed that the harddrive had gotten knocked around, bad power lead, etc. I made sure that the connecters were securely attached and booted again, repair etc, same problem. I believe that the problem lies with the configuration of using a PCI card to connect the hard drive to the motherboard. When its connected to the mother board, however, the boot agent wont run, saying that the "disk is not ready" or something to that extent.
Trying to help daughter with PC problem. She has a Dell Optiplex GX260 running Windows XP Pro. For some time she has been having problems: freeze ups and other noxious behavior. When trying to open email attachments, tabs start appearing and keep on appearing until the PC is turned off. Finally, it stopped booting to Windows. When it is powered on, the Dell logo window appears briefly, then a black screen appears with a cursor top left.
I recently bought a new HDD because the old one appears ready to crash (clicking sound). My DVD-Rom is also dead, so I booted from the old hard drive & installed a fresh OS (Windows XP) on the new drive. However, I cannot boot from the new drive alone, because the 'system volume' is Drive C: (old drive) & 'boot volume' is Drive G: (new drive). How can I fix this? I don't mind reinstalling the OS, but I cannot boot from a CD & I don't know how long the old drive will last
I have Windows XP home edition already installed on my system and I for some reasons I want to reinstall them on a different hard drive (I have 2 IDE drives). It is very important that my initial windows setup, the one I am running on now, will be working after the new installation too. Is that possible?
