Installed New Hard Drive / Getting Boot Failure Error ?
Sep 2, 2009
I did a new hard drive install. When the new HD was complete I thought I would copy the data from the old drive to the new.They both still had os installed They were both connected to the system at the same time.When I finished, I removed the old drive. The new drive wouldn't boot. "Disk boot failure, insert system disk and press enter". After recovery disk completed, the system booted fine. I could reboot from the shutdown option.
The problem I have is when the system is shutdown completely. It requires the system disk again. It will reboot after the system disk is reinstalled. I continually get the "Disk boot failure, insert system disk and press enter" error message.During bootup after a shutdown, I can F2 into the bios before the error message. It will allow me to exit and then windows will boot without the error message.
a friend asked me to install a new hard drive for him because his crashed. So i purchased a new hard drive (maxtor 60 gb) set out to partition and format the drive, using a win 98 boot disk. I partitoned the drive ( for large volume drive.) Formatted the drive ( format c: /s ) to include system files.and proceeded with Os install Windows 2000. Everything went as smooth as silk... the when install finished, I was prompted to remove the disk from cd rom and complete installation with the onscreen prompt. I removed disk, clicked finish and the computer rebooted upon loading, when it went to start windows it said DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
I put the Win 2K disc back in and hit enter. It started windows perfectly no errors at all... then I took disk out re-started ( to check system stability) and back to the same error message: DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. I of course freaked out, I feel like an idiot cause I cant get this thing to work right. tried reformatting without the sytem files, re-partioning tried win 98, winXP, nothing same stuff! So I talked to a pal got a hard drive wipe program off the net "killdisk", wiped the drive and tried to reinstall Win 2K, same problem.
My laptop, which was my dad's old office laptop, recently crashed. One day when I turned it on, a blue screen popped up and said there were a corrupt file or something. So I decided to reformat using a Windows XP cd, and for some reason it kept getting stuck on 91%, so I just left it on and it eventually hit 100% and completed.After everything was done, I turned it back and after the first Dell Screen bootup, the screen goes blank for 30 seconds, then a a line of white vertical lines show up at the bottom, looking at though something is loading, and it eventually finishes after a minute or two.Next the XP Bootup Screen comes up, and begins to load, but then the screen goes blank again.
I recently installed a new hard drive into a friends computer and installed XP Home. I ran all the updates and service packs.
I left later that day and let him install all his applications.
I got a call tonight from him saying he really screwed up and doesn't know what to do. I had to follow his thinking over the phone so I hope I get this all correct.
He had trouble loading the drivers for his HP printer. He would get an error saying that a C: empHP_WebRelease folder was missing. He did manage to figure out that for some reason when I installed XP it called the Boot drive "I" instead of "C"
A problem has been detected and Windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps.Check for viruses on your computer. Remove any newly installed hard disks or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
I recently installed a new Seagate 120 GB hard drive as a slave. I also installed iTunes and am importing songs from my CD collection. Since doing this I am frequently getting a blue screen on Windows XP w/ Service Pack 2. It also seems as though my system is a little sluggish.
My notebook froze overnight. While rebooting my notebook, I get: No hard drive found error. After several reboots, I get CANNOT LOAD OPERATING SYSTEM. I insert the XP CD to repair XP - No Go. I insert the XP CD to do a fresh install - it tells me to format my hard drive. But I need the data on there. Never happened before - and I am lost.
A friend of mine would like me to take a look at his computer for him later. He said he is getting an error message when he starts it up that says Failure to read internal drive Press F1 to reboot. He doesn't have the exact message but that's about it. Does this mean the hard drive is bad, or is there hope that I can fix this?
I am trying to determine if I really have a hard drive failure. I'm running XP pro. While running EXCEL this morning, my computer froze. Could do nothing but turn the power off and re-boot. Upon re-booting, prior to getting to the Windows screen, I got a message about can't find the hardware. Re-booted again, this time it said there was a problem with the hard drive and it ran a check disc. Took about 6 hours. While it was running, it said there were about 8 to 10 problems had to do with the IE5.1 temporary files. It finished and booted to windows XP.
I thought all was ok. Finished by Excel work. Printed it out ok. Came back later to a black screen with the same initial message about can't finding the hardware.I called Gateway - Tech adviser had me run a program from the Recovery disc that checks the hard drive. Program said hard drive failed. Tech rep said I need to get a new Hard drive.Is this correct or are there other possibilities?
I recently tried to reinstall windows xp, but the installation was interrupted and left me with a partially installed windows on my hard drive. Now, whenever I try to install again, it gives me the error: NTLDR is missing. I made a msdos boot disc to reformat my drive such that I can try installing windows again. However, I have two hard drive (one for windows and programs and one for storage) and I don't know which one is which letter. How can I find this information, so that I don't accidentally wipe my storage drive?
An external hard drive. When it is on & I try to boot,I get the following error : Invalid system disk Replace the disk, and then press any key I then have to turn off the external & press any key to get it to boot. Is there a way that I can boot with that external turned on. Some setting I need to change perhaps? I have an E-Machines computer about 2 years old.
This past August i purchased a Dell PC. It has 160gig Hard Drive. Last night while finishing up some work my PC froze. Because i couldnt move i rebooted my machine. After i rebooted my PC was stuck in the Windows XP boot screen(The screen where that little blue bar scrolls just before the PC boots into windows). It wouldnt boot into windows. I decided to reboot again, and again it just shows the windows xp scroll bar trying to connectI then called Dell, i was asked to boot up and press F12 to do a diagnostic. It came back showing "Failure 7". The Dell "Guru" epxplained to me that my hardrive had failed on me.
Every time I turn my computer on I am getting the following error message;
"Read Failure on internal hard drive. No bootable devices -- Strike F1 to retry boot F2 for setup utlility"
and every time I attempt to retry boot by entering F1 I do am immediately brought back to the same message. Can someone please help as I am in desperate need to recover company files located on the hard drive.
My external hard drive has suddenly stopped working.My computer can see the drive (but not the drive label) and the shortcut I have for the drive will open it but when it does there is nothing there.I have downloaded a few so called free data recovery pieces of software and they can all see the data on my drive with no problems, even stuff I'd previously deleted seems to be available for recovery, however, as soon as you try to recover the data these "free to use" tools need to be registered and paid for.
I am experiencing a registry (hive) file failure which does not allow me to load Windows. Whenever I try to boot in safe mode, or any mode, I get a blue screen that reads:i did some searching on this forum and found a thread that mentioned taking the drive out of the problem computer and slaving it into a different machine to repair the registry. I do have another computer, so this would be an option for me although may be a bit too advanced for my expertise or lack thereof. But I have a BlacX hard drive docking station (basically an external hard drive reader)
applications were running slow, having problems closing etc. I expected a virus problem, but NIS 2005 did not detect any viruses. This morning I attempted to boot the machine as usual, and I found that windows would not boot after repeated attempts in any mode. I borrowed a friends windows XP cd, i dont have mine on hand, and attempted to repair the installation. However, when it tried to copy files to the hard drive it said that it could not detect it.
Naturally, seeing this i assumed that the harddrive had gotten knocked around, bad power lead, etc. I made sure that the connecters were securely attached and booted again, repair etc, same problem. I believe that the problem lies with the configuration of using a PCI card to connect the hard drive to the motherboard. When its connected to the mother board, however, the boot agent wont run, saying that the "disk is not ready" or something to that extent.
I can't believe this is happening to me. AGAIN. How do I even begin to figure out what is wrong? Let me provide some background.In March I had a hard drive failure. I had shot 4gb worth of photos and that night I copied the memory cards onto my hard drive. I then began sorting, re-naming, and organizing them. Next morning, I was in the middle of doing that when it died. The computer froze up a couple times before eventually the drive was not recognized. Diagnostic tools showed some corruption or logical failure. I RMA'd the drive but I lost several gigs of photos from a previous day.
I keep getting this message everytime I try to turn the computer on. It will occasionally begin to start up but then will automatically reboot and I will get the Disk boot failure - Insert system disk and press Enter message again. I read the old posts on this but I have not been installing anything new.
Okay every time i start my pc i get this error. I insert my gigabyte system cd with gives me option to backup or reboot.Back up = error dont have enough hard disk space reboot = nothing the same error as in the title
I have a 60GB Seagate HDD running Windows XP, which when connected as the Master Drive will no longer boot Windows. Instead I get an error screen reading "Disk Boot Failure - Insert System Disk and Press Enter."The drive is recognised by the BIOS approximately 1/4 of the time I have it plugged in. I have attempted to run the drive as a slave to my current HD on the same motherboard which I am running at the moment to no avail. I have tried using the program "GetDataBack for NTFS" which failed to recognise the drive.
I am receiving the following error at startup: "Disk boot failure, insert system disk and press enter" There are no CD's in the CD drive. However, I ran the System Diagnostics and when it got to the Disk section - it is not recognizing the disk - it said Warning...and to check the cables. I have done that, and everything seems to be connected correctly.
hp media center pc 864n , windows xp, have checked al wires, plugs, turned off , restarted etc keep getting disk boot failure, insert system disk and press enter
I have a second hard drive installed on my computer. Lets call this F:My main hard drive, were I am running WXP SP2, Home Ed., and were my program files are kept. Lets Call this drive C:IP3, 733mhz, 384 mb, HOMEMADE. works well, very happy $5.99 OBO.I am filling up C: and have tons of room on F:. Can I put program files on F:, easily that my computer will recognize and be able to use effectivley and effciently? With out jack-ups? Yes I understand that this an imperfect world, but If I could do what I wish within this situation, I will be closer to.
i have use more than 10 disk of windows xp to format compaq pressario v3000.. when i press enter to format.. it shown that the hard drive is not installed. what should i do sir?
In addition to my other posting here, I want to ask you professionals, if it is possible to mirror my existing hard drive onto a much larger hard drive?My partition C became way too small over the years, the Windows XP files have blown up their size. Partition D (which contains all installed programs) is still fine. But I was never able to use software like "Partition Magic" to adjust the space between these two partitions.So I might just have to buy a new hard drive. But I want - I even HAVE - to keep the installed XP the way it is now. Lots of software installed. So I wonder, if there is any way just to "mirror" the existing version of XP onto a new hard drive, and then just to exchange the old hard drive with the new one?
I have a 2nd hard drive installed on my computer and i noticed yesterday that everything on it except for one folder has been deleted everything from my music to my videos. However, when i check the properties of the hard drive it still shows that space is being taken up on that 2nd hard drive as if all my files are still there. I went into my itunes and tried to play the music i have on my 2nd hard drive through itunes and to my surprise it still plays which it shouldn't if the files had in fact been deleted.
installed second hard drive,moved program files from c drive to folder i created in new drive.installed farcry onto new folder.but farcry files where scattered allover & not in folder of its own.uninstalled farcry with program called my uninstaller.pc then froze couldnt get into task manager,so switched off pc.when i restarted,disaster, folder in new drive had gone along with my programs ,mostly games,
Help. I've installed a 2nd hard drive (windows XP). Everything went smoothly, however, when I was prompted to copy all files over to the new drive, I opted not to do so, not realizing that would cause me to not be able to install programs on that drive. Now my new drive is just used for storing music, pictures and movies. Please tell me what I'd need to do so I can install programs on that drive. Thanks
I've been using an USB enclosure successfully for some time with no problem. I upgraded to a Maxtor 100 gig in the same enclosure. When turned on it does the "plug and play" chimes and it shows up in the device manager as installed and working properly. But it is not shown in My Computer as a drive letter.
Dell dual core, 1 gig RAM, Windows XP service pack 2
just installed a second internal hard drive. tried to access bios at start up (to setup hard drive) but system doesn't respond to ANY keyboard keys. system just continues with normal Windows boot-up. once XP is running all functions and software seem fine. no matter how many times I try at "Press Del to enter Setup" nothing works. Jusat before I had this problem, I had a problem with software (which I have removed) that caused my system to lock up. when I rebooted system stopped and offerred reboot options, ea: Safe Mode, but I the arrow keys would not work, system just went directly to Windows boot up.how can I access the bios if system doesn't respond to keyboard?
I just recently installed a new hard drive and uploaded windows xp professional. To my surprise I continue to get this box that pops up and says" Critical error message! Registry damaged and corrupted. To fix this problem: open IE and type www.registryxp.com Once you load the web page, close this message window. After you install the cleaner program you will not recieve any more reminders or pop ups like this one". I went to that page and it wants to charge me to sign up for a registry cleaner. This box pops up every 2 minutes or so . I've tried other registry cleaners and pop up blockers, spyware removal, deleting cookies, add/ remove programs, everything I can think of but to no avail. I know that it's hiding somewhere but I'm not too computer literate to go to far into my system without the proper help.
