Hard Drive Failure - PC Boots
May 5, 2005
This past August i purchased a Dell PC. It has 160gig Hard Drive. Last night while finishing up some work my PC froze. Because i couldnt move i rebooted my machine. After i rebooted my PC was stuck in the Windows XP boot screen(The screen where that little blue bar scrolls just before the PC boots into windows). It wouldnt boot into windows. I decided to reboot again, and again it just shows the windows xp scroll bar trying to connectI then called Dell, i was asked to boot up and press F12 to do a diagnostic. It came back showing "Failure 7". The Dell "Guru" epxplained to me that my hardrive had failed on me.
View 7 Replies
ADVERTISEMENT
Jun 20, 2008
A friend of mine would like me to take a look at his computer for him later. He said he is getting an error message when he starts it up that says Failure to read internal drive Press F1 to reboot. He doesn't have the exact message but that's about it. Does this mean the hard drive is bad, or is there hope that I can fix this?
View 3 Replies
View Related
Apr 23, 2005
I am trying to determine if I really have a hard drive failure. I'm running XP pro. While running EXCEL this morning, my computer froze. Could do nothing but turn the power off and re-boot. Upon re-booting, prior to getting to the Windows screen, I got a message about can't find the hardware. Re-booted again, this time it said there was a problem with the hard drive and it ran a check disc. Took about 6 hours. While it was running, it said there were about 8 to 10 problems had to do with the IE5.1 temporary files. It finished and booted to windows XP.
I thought all was ok. Finished by Excel work. Printed it out ok. Came back later to a black screen with the same initial message about can't finding the hardware.I called Gateway - Tech adviser had me run a program from the Recovery disc that checks the hard drive. Program said hard drive failed. Tech rep said I need to get a new Hard drive.Is this correct or are there other possibilities?
View 7 Replies
View Related
Aug 16, 2008
My laptop, which was my dad's old office laptop, recently crashed. One day when I turned it on, a blue screen popped up and said there were a corrupt file or something. So I decided to reformat using a Windows XP cd, and for some reason it kept getting stuck on 91%, so I just left it on and it eventually hit 100% and completed.After everything was done, I turned it back and after the first Dell Screen bootup, the screen goes blank for 30 seconds, then a a line of white vertical lines show up at the bottom, looking at though something is loading, and it eventually finishes after a minute or two.Next the XP Bootup Screen comes up, and begins to load, but then the screen goes blank again.
View 14 Replies
View Related
Jan 5, 2006
Every time I turn my computer on I am getting the following error message;
"Read Failure on internal hard drive. No bootable devices -- Strike F1 to retry boot F2 for setup utlility"
and every time I attempt to retry boot by entering F1 I do am immediately brought back to the same message. Can someone please help as I am in desperate need to recover company files located on the hard drive.
View 10 Replies
View Related
Oct 15, 2009
My external hard drive has suddenly stopped working.My computer can see the drive (but not the drive label) and the shortcut I have for the drive will open it but when it does there is nothing there.I have downloaded a few so called free data recovery pieces of software and they can all see the data on my drive with no problems, even stuff I'd previously deleted seems to be available for recovery, however, as soon as you try to recover the data these "free to use" tools need to be registered and paid for.
View 12 Replies
View Related
Sep 2, 2009
I did a new hard drive install. When the new HD was complete I thought I would copy the data from the old drive to the new.They both still had os installed They were both connected to the system at the same time.When I finished, I removed the old drive. The new drive wouldn't boot. "Disk boot failure, insert system disk and press enter". After recovery disk completed, the system booted fine. I could reboot from the shutdown option.
The problem I have is when the system is shutdown completely. It requires the system disk again. It will reboot after the system disk is reinstalled. I continually get the "Disk boot failure, insert system disk and press enter" error message.During bootup after a shutdown, I can F2 into the bios before the error message. It will allow me to exit and then windows will boot without the error message.
View 19 Replies
View Related
Jul 3, 2010
I am experiencing a registry (hive) file failure which does not allow me to load Windows. Whenever I try to boot in safe mode, or any mode, I get a blue screen that reads:i did some searching on this forum and found a thread that mentioned taking the drive out of the problem computer and slaving it into a different machine to repair the registry. I do have another computer, so this would be an option for me although may be a bit too advanced for my expertise or lack thereof. But I have a BlacX hard drive docking station (basically an external hard drive reader)
View 4 Replies
View Related
May 25, 2010
I can't believe this is happening to me. AGAIN. How do I even begin to figure out what is wrong? Let me provide some background.In March I had a hard drive failure. I had shot 4gb worth of photos and that night I copied the memory cards onto my hard drive. I then began sorting, re-naming, and organizing them. Next morning, I was in the middle of doing that when it died. The computer froze up a couple times before eventually the drive was not recognized. Diagnostic tools showed some corruption or logical failure. I RMA'd the drive but I lost several gigs of photos from a previous day.
View 14 Replies
View Related
Apr 22, 2007
I had a hard drive failure, and have a full copy of the hard disk which contains the operating system. However, when I copy this in its entirety to a new hard drive, that hard drive does not boot.
The bios just states "No Operating System".
Is it actually possible to do what I am trying to do? That is, to reinstate the operating system from a backup CD?
View 2 Replies
View Related
Apr 3, 2006
Fresh format and install onto a 320gb SATA drive. Windows XP SP2.BIOS recognizes the drive.Unless the CD-ROM is ahead of the Hard Drive in the BIOS boot settings, and the Windows XP SP2 install disc is in the drive, the system will not boot.The message displayed is along the lines of "Disk boot error. Please insert a system disk and press enter."If the CD-ROM is moved back or removed from the boot order, this result also occurs.
If the install disc is in the drive, and the BIOS is instructed to look for a CD-ROM boot before a Hard Drive boot, a prompt is displayed along the lines of "Press any key to boot from CD." If no key is pressed, windows XP boots normally. Formating, reinstalling XP, messing with BIOS boot order, confirmed HD reads correctly in BIOS, with and without CDs in drive, repairing master boot record, adding a boot delay in BIOS.
View 5 Replies
View Related
Jun 1, 2005
When the system boots into the new drive R:, it still wants the boot partition c: for something. If I boot with the IDE disconnected, it'll boot to the login screen, and allow me to log in, but after a few minutes of a blank screen & cursor, it drops back to the login.
I have PartitionMagic 7.0, and used DriveMapper to change all references to C: to R:, but that didn't do it. How do I cut my system's dependence on the failing drive, before it fails altogether?
View 12 Replies
View Related
Mar 5, 2010
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
View 1 Replies
View Related
Aug 5, 2010
My laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
View 6 Replies
View Related
May 3, 2005
a friend asked me to install a new hard drive for him because his crashed. So i purchased a new hard drive (maxtor 60 gb) set out to partition and format the drive, using a win 98 boot disk. I partitoned the drive ( for large volume drive.) Formatted the drive ( format c: /s ) to include system files.and proceeded with Os install Windows 2000. Everything went as smooth as silk... the when install finished, I was prompted to remove the disk from cd rom and complete installation with the onscreen prompt. I removed disk, clicked finish and the computer rebooted upon loading, when it went to start windows it said DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
I put the Win 2K disc back in and hit enter. It started windows perfectly no errors at all... then I took disk out re-started ( to check system stability) and back to the same error message: DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. I of course freaked out, I feel like an idiot cause I cant get this thing to work right. tried reformatting without the sytem files, re-partioning tried win 98, winXP, nothing same stuff! So I talked to a pal got a hard drive wipe program off the net "killdisk", wiped the drive and tried to reinstall Win 2K, same problem.
View 8 Replies
View Related
May 18, 2005
applications were running slow, having problems closing etc. I expected a virus problem, but NIS 2005 did not detect any viruses. This morning I attempted to boot the machine as usual, and I found that windows would not boot after repeated attempts in any mode. I borrowed a friends windows XP cd, i dont have mine on hand, and attempted to repair the installation. However, when it tried to copy files to the hard drive it said that it could not detect it.
Naturally, seeing this i assumed that the harddrive had gotten knocked around, bad power lead, etc. I made sure that the connecters were securely attached and booted again, repair etc, same problem. I believe that the problem lies with the configuration of using a PCI card to connect the hard drive to the motherboard. When its connected to the mother board, however, the boot agent wont run, saying that the "disk is not ready" or something to that extent.
View 12 Replies
View Related
Oct 13, 2009
current HD going bad, have second HD installed and using as back but now i need to make the second HD my primary, can i do this without having to reformat in order to add booting files.
View 2 Replies
View Related
Dec 5, 2007
using XP. am having wild swings in my hard drive space go from 46.1 to 44.1 and sometimes in between. have not installed any new programs recently. what could be causing it and how do i correct also am noticing my laptop as slowed appreciablydo know whether the two problems are correlated
View 3 Replies
View Related
Jul 2, 2008
i have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP .
well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
View 5 Replies
View Related
Mar 7, 2005
My computer won't boot...the master HD had a SMART failure. I've decided to replace my current master HD with a WD 80gig. I also have an identical WD 80gig slave on my system (which I do not want to reformat). Seems simple...however, My slave is the current c: drive. For some reason when i reformatted last time it automatically named my root drive g:...no idea. And to get my computer to recognize my ipod i needed a c: drive so i ended up changing my slave to that via a program in xp. Does anyone know if this will be a real problem when i go to format and partition the new drive? Will it show both HDs without assigned letters? Should I install, format, and setup xp on the new HD without a slave attached and then add the slave later?
View 10 Replies
View Related
Oct 13, 2008
I had this idea, see if anybody has an opinion about this. My wife has an old XP computer I want to buy her a new one but she doesn't like the vista and she wants to keep the old xp operating system. What I want to do is take the old hard drive and put it in the new computer as the master and take the new hard drive and put it in as the slave erasing the vista off it. Then using the master slave way can I transfer the xp operating system and all her files and data from the old hard drive to the new one.
View 3 Replies
View Related
Oct 7, 2010
We have Windows XP Home Edition 80 GBCan we copy entire hard drive to an external hard drive?
View 36 Replies
View Related
Oct 5, 2006
Can anyone tell me whats the difference between a ATA hard drive and a SATA hard drive?
View 2 Replies
View Related
Apr 25, 2005
I have a 60GB Seagate HDD running Windows XP, which when connected as the Master Drive will no longer boot Windows. Instead I get an error screen reading "Disk Boot Failure - Insert System Disk and Press Enter."The drive is recognised by the BIOS approximately 1/4 of the time I have it plugged in. I have attempted to run the drive as a slave to my current HD on the same motherboard which I am running at the moment to no avail. I have tried using the program "GetDataBack for NTFS" which failed to recognise the drive.
View 7 Replies
View Related
Jul 20, 2010
I am receiving the following error at startup: "Disk boot failure, insert system disk and press enter" There are no CD's in the CD drive. However, I ran the System Diagnostics and when it got to the Disk section - it is not recognizing the disk - it said Warning...and to check the cables. I have done that, and everything seems to be connected correctly.
View 2 Replies
View Related
Oct 18, 2009
I recently helped someone save the documents off of their computer after it crashed (it was missing a Windows file. I tried the repair command and it wouldn't work, so I decided to save the files and reformat the hard drive).I plugged the hard drive into a working computer and pulled all the documents off of it (VERY slowly) onto an external hard drive.
Every once in awhile I wouldn't be able to pull a picture or document off because of a cyclic redundancy check error. I just moved on and saved what I could. I assumed it was because the hard drive was already bad so I just moved what I could.
View 9 Replies
View Related
Jan 8, 2009
I am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
View 6 Replies
View Related
May 6, 2005
I can not access hard disk properties because Windows Explorer hangs whenever I Right click on a hard drive icon. I am running WXP pro SP2 completely up to date with updates.
View 1 Replies
View Related
May 19, 2006
A problem has been detected and Windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps.Check for viruses on your computer. Remove any newly installed hard disks or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
View 4 Replies
View Related
Jul 17, 2005
I have a 2 hard disc system, Windows XP pro and most programmes run from the C Drive. A few, plus all my data run from the F drive. Over the last few days I have encountered a massive slowdown in getting the computer started - form certainly less than 5 minutes to over 20 minutes. I have not added anything to the autoruns at all.
Programmes and data (eg music) run fine if they are on the F drive, but if they are on the C drive they run incredibly slowly so music is fragmented and at times its like trying to wade through treacle to get anything done. I have been getting crashes of the PC with a message about a kernel problem... but haven't yet copied all the data from that to get the detail. When it crashes the next boot reports a disc boot system failure, when i reboot ahgain it loads up but painfully slowly. The C drive was defraggged just afew weeks ago. I'm thinking the drive is about to pack up....
View 10 Replies
View Related
Jun 4, 2008
I am facing two problems with my lap top hp campac presario 2100.
1.The loptops battery to be changed. I dont know how many batteries are there. Any cmos battery there like any other pc. Pl advice. What would be the cost. and the model number . The hard disk requires replacement. I want to know the model numberor exact type of hard disk would be fit in. and the cost thereof.3. Windows xp home edition has been preloaded in the laptop. How to take a copy of the os and copy in the new hard disk. I have the serial number etc for the OS.
View 1 Replies
View Related
