Won't Boot / Hard Drive Failure?
Aug 16, 2008
My laptop, which was my dad's old office laptop, recently crashed. One day when I turned it on, a blue screen popped up and said there were a corrupt file or something. So I decided to reformat using a Windows XP cd, and for some reason it kept getting stuck on 91%, so I just left it on and it eventually hit 100% and completed.After everything was done, I turned it back and after the first Dell Screen bootup, the screen goes blank for 30 seconds, then a a line of white vertical lines show up at the bottom, looking at though something is loading, and it eventually finishes after a minute or two.Next the XP Bootup Screen comes up, and begins to load, but then the screen goes blank again.
View 14 Replies
ADVERTISEMENT
Sep 2, 2009
I did a new hard drive install. When the new HD was complete I thought I would copy the data from the old drive to the new.They both still had os installed They were both connected to the system at the same time.When I finished, I removed the old drive. The new drive wouldn't boot. "Disk boot failure, insert system disk and press enter". After recovery disk completed, the system booted fine. I could reboot from the shutdown option.
The problem I have is when the system is shutdown completely. It requires the system disk again. It will reboot after the system disk is reinstalled. I continually get the "Disk boot failure, insert system disk and press enter" error message.During bootup after a shutdown, I can F2 into the bios before the error message. It will allow me to exit and then windows will boot without the error message.
View 19 Replies
View Related
Jun 20, 2008
A friend of mine would like me to take a look at his computer for him later. He said he is getting an error message when he starts it up that says Failure to read internal drive Press F1 to reboot. He doesn't have the exact message but that's about it. Does this mean the hard drive is bad, or is there hope that I can fix this?
View 3 Replies
View Related
Apr 23, 2005
I am trying to determine if I really have a hard drive failure. I'm running XP pro. While running EXCEL this morning, my computer froze. Could do nothing but turn the power off and re-boot. Upon re-booting, prior to getting to the Windows screen, I got a message about can't find the hardware. Re-booted again, this time it said there was a problem with the hard drive and it ran a check disc. Took about 6 hours. While it was running, it said there were about 8 to 10 problems had to do with the IE5.1 temporary files. It finished and booted to windows XP.
I thought all was ok. Finished by Excel work. Printed it out ok. Came back later to a black screen with the same initial message about can't finding the hardware.I called Gateway - Tech adviser had me run a program from the Recovery disc that checks the hard drive. Program said hard drive failed. Tech rep said I need to get a new Hard drive.Is this correct or are there other possibilities?
View 7 Replies
View Related
May 5, 2005
This past August i purchased a Dell PC. It has 160gig Hard Drive. Last night while finishing up some work my PC froze. Because i couldnt move i rebooted my machine. After i rebooted my PC was stuck in the Windows XP boot screen(The screen where that little blue bar scrolls just before the PC boots into windows). It wouldnt boot into windows. I decided to reboot again, and again it just shows the windows xp scroll bar trying to connectI then called Dell, i was asked to boot up and press F12 to do a diagnostic. It came back showing "Failure 7". The Dell "Guru" epxplained to me that my hardrive had failed on me.
View 7 Replies
View Related
Jan 5, 2006
Every time I turn my computer on I am getting the following error message;
"Read Failure on internal hard drive. No bootable devices -- Strike F1 to retry boot F2 for setup utlility"
and every time I attempt to retry boot by entering F1 I do am immediately brought back to the same message. Can someone please help as I am in desperate need to recover company files located on the hard drive.
View 10 Replies
View Related
Oct 15, 2009
My external hard drive has suddenly stopped working.My computer can see the drive (but not the drive label) and the shortcut I have for the drive will open it but when it does there is nothing there.I have downloaded a few so called free data recovery pieces of software and they can all see the data on my drive with no problems, even stuff I'd previously deleted seems to be available for recovery, however, as soon as you try to recover the data these "free to use" tools need to be registered and paid for.
View 12 Replies
View Related
May 3, 2005
a friend asked me to install a new hard drive for him because his crashed. So i purchased a new hard drive (maxtor 60 gb) set out to partition and format the drive, using a win 98 boot disk. I partitoned the drive ( for large volume drive.) Formatted the drive ( format c: /s ) to include system files.and proceeded with Os install Windows 2000. Everything went as smooth as silk... the when install finished, I was prompted to remove the disk from cd rom and complete installation with the onscreen prompt. I removed disk, clicked finish and the computer rebooted upon loading, when it went to start windows it said DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
I put the Win 2K disc back in and hit enter. It started windows perfectly no errors at all... then I took disk out re-started ( to check system stability) and back to the same error message: DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. I of course freaked out, I feel like an idiot cause I cant get this thing to work right. tried reformatting without the sytem files, re-partioning tried win 98, winXP, nothing same stuff! So I talked to a pal got a hard drive wipe program off the net "killdisk", wiped the drive and tried to reinstall Win 2K, same problem.
View 8 Replies
View Related
Jul 3, 2010
I am experiencing a registry (hive) file failure which does not allow me to load Windows. Whenever I try to boot in safe mode, or any mode, I get a blue screen that reads:i did some searching on this forum and found a thread that mentioned taking the drive out of the problem computer and slaving it into a different machine to repair the registry. I do have another computer, so this would be an option for me although may be a bit too advanced for my expertise or lack thereof. But I have a BlacX hard drive docking station (basically an external hard drive reader)
View 4 Replies
View Related
May 18, 2005
applications were running slow, having problems closing etc. I expected a virus problem, but NIS 2005 did not detect any viruses. This morning I attempted to boot the machine as usual, and I found that windows would not boot after repeated attempts in any mode. I borrowed a friends windows XP cd, i dont have mine on hand, and attempted to repair the installation. However, when it tried to copy files to the hard drive it said that it could not detect it.
Naturally, seeing this i assumed that the harddrive had gotten knocked around, bad power lead, etc. I made sure that the connecters were securely attached and booted again, repair etc, same problem. I believe that the problem lies with the configuration of using a PCI card to connect the hard drive to the motherboard. When its connected to the mother board, however, the boot agent wont run, saying that the "disk is not ready" or something to that extent.
View 12 Replies
View Related
May 25, 2010
I can't believe this is happening to me. AGAIN. How do I even begin to figure out what is wrong? Let me provide some background.In March I had a hard drive failure. I had shot 4gb worth of photos and that night I copied the memory cards onto my hard drive. I then began sorting, re-naming, and organizing them. Next morning, I was in the middle of doing that when it died. The computer froze up a couple times before eventually the drive was not recognized. Diagnostic tools showed some corruption or logical failure. I RMA'd the drive but I lost several gigs of photos from a previous day.
View 14 Replies
View Related
Apr 25, 2005
I have a 60GB Seagate HDD running Windows XP, which when connected as the Master Drive will no longer boot Windows. Instead I get an error screen reading "Disk Boot Failure - Insert System Disk and Press Enter."The drive is recognised by the BIOS approximately 1/4 of the time I have it plugged in. I have attempted to run the drive as a slave to my current HD on the same motherboard which I am running at the moment to no avail. I have tried using the program "GetDataBack for NTFS" which failed to recognise the drive.
View 7 Replies
View Related
Jul 20, 2010
I am receiving the following error at startup: "Disk boot failure, insert system disk and press enter" There are no CD's in the CD drive. However, I ran the System Diagnostics and when it got to the Disk section - it is not recognizing the disk - it said Warning...and to check the cables. I have done that, and everything seems to be connected correctly.
View 2 Replies
View Related
Oct 8, 2008
I recently installed a new hard drive into a friends computer and installed XP Home.
I ran all the updates and service packs.
I left later that day and let him install all his applications.
I got a call tonight from him saying he really screwed up and doesn't know what to do.
I had to follow his thinking over the phone so I hope I get this all correct.
He had trouble loading the drivers for his HP printer. He would get an error saying that a C: empHP_WebRelease folder was missing. He did manage to figure out that for some reason when I installed XP it called the Boot drive "I" instead of "C"
View 1 Replies
View Related
Jul 17, 2005
I have a 2 hard disc system, Windows XP pro and most programmes run from the C Drive. A few, plus all my data run from the F drive. Over the last few days I have encountered a massive slowdown in getting the computer started - form certainly less than 5 minutes to over 20 minutes. I have not added anything to the autoruns at all.
Programmes and data (eg music) run fine if they are on the F drive, but if they are on the C drive they run incredibly slowly so music is fragmented and at times its like trying to wade through treacle to get anything done. I have been getting crashes of the PC with a message about a kernel problem... but haven't yet copied all the data from that to get the detail. When it crashes the next boot reports a disc boot system failure, when i reboot ahgain it loads up but painfully slowly. The C drive was defraggged just afew weeks ago. I'm thinking the drive is about to pack up....
View 10 Replies
View Related
Apr 22, 2007
I had a hard drive failure, and have a full copy of the hard disk which contains the operating system. However, when I copy this in its entirety to a new hard drive, that hard drive does not boot.
The bios just states "No Operating System".
Is it actually possible to do what I am trying to do? That is, to reinstate the operating system from a backup CD?
View 2 Replies
View Related
Dec 28, 2005
Hey, have built a new pc, but am using the same hd as my old one, when booting i get a "disk boot failure insert system disk and press enter" however when i press enter it boots up, not really a big problem just annoying and i wonderd if anyone could help get rid of it.
View 4 Replies
View Related
Nov 11, 2006
I am unable to boot my PC most of the times.Whenever I switch on my PC,I see the following message nine ot of ten times. DiskError/Boot Faliure Reboot and select proper boot device or insert Boot media in selected boot device If I press enter after this messages & keep pressing following messages appear from time to time (Not simultaneously). If just after making the switch on, I press F2 key to check the boot device preference
If just after making the switch on , I press f11 key to reach the boot menu I always find the 1.44 MB Floppy option highlighted as the booting choice.(though there had not been any floppy in the floppy drive, I dont have any really)I make the hard disk option highlighted & it solves the problem only a few times. But next time when I try F11 key to check the boot menu again I find 1.44 MB floppy highlighted.
View 1 Replies
View Related
Sep 18, 2006
A friend of mine's computer has three hard drives. The one designated as her C drive is an 8gb thing. She has a 40gb drive along with another 30gb one. In her cmos setup I couldn't get it to boot with a drive besides that which was designated C So can I just copy and paste all the stuff in her C drive into another drive but how would I get windows to boot off of that drive instead??? She has XP home
View 3 Replies
View Related
Sep 7, 2007
I just bought a new hard drive today (120 GB Fujistsu) for my laptop computer. I installed it, and I am now trying to boot Windows XP onto it with the CD-ROM. But for some reason, the CD is not booting up and my computer keeps saying "Operating System Not Found." I tried changing the boot order from the hard drive to the CD-Drive, but that didn't help either.
View 3 Replies
View Related
Sep 26, 2005
I need to reinstall the OS on the hard drive, but I have to try and get some files off of it first or can I install new OS over the old one without a loss of my files?
View 5 Replies
View Related
Feb 15, 2005
On my first attempt to boot, the hard drive is not detecte On the second attempt, the bios always sees the hard drive and boot up is normal.I have tested the Seagate hard drive with the Seagate hard drive support tool and all is error free.This is consistent. I can't find anything in the bios where this would be switchable.
Boot up order is:1. DVD drive 2. Floppy drive 3. Hard drive Sony Vaio PCV-RZ22G.Windows XP Home. P4-2.4 1 gig ram.
View 5 Replies
View Related
Nov 28, 2006
I have two HDs installed on my comp. The master (C drive) is running WinXP home edition. The slave (E drive) was taken from my old comp which ran under Win ME (which should still be installed on it). I need to boot up with ME as a "work around" to print some files using a RIP program that is not supported by XP.Is it possible to boot from the slave HD? I looked under the setup options accessed by hitting f12 key during start up, and the "E" drive did not show up on the list of drives. Floppy, Cd drives, and a USB external drive did show up. I also tried looking under a menu accessed by hitting the f2 key...and a second hard drive showed up in that menu, but the options I had available were "off" (the setting I found it set at) or "auto", I changed it to "auto" and tried to reboot but it said "no loader_"
View 13 Replies
View Related
Sep 17, 2007
I have a Compaq SR-1200NX system that came with a 40gb drive. It was too small for all my music and apps so I installed a second drive which I then started using for files.So Drive 1 was 40 gb and Drive 2 was 80GB..I was running out of space again so I used a drive cloner to move the 40 GB drive to a 200GB Drive.Disk Management shows different according to it Drive 0 is the 80gb drive and is assigned a letter of D and Drive 1 is the 200GB drive assigned a letter of C.Both C and D have a Windows directory off of and a Program Files but the Program Files on C has more entries than the one on D.
View 2 Replies
View Related
Aug 3, 2005
Manufacturers get preinstalled WindowsXP on their harddrives? How does one build a similar environment on a blank harddrive? I've looked everywhere for some discussion about this, but can't find anything useful. I've read about WinPE and Bart'sPE and so much more, but noone seems to have a summary of how one goes about initializing a hard drive to boot and start an install of WindowsXP.
View 5 Replies
View Related
Feb 22, 2007
Anyone know how to automatically boot from the hard drive? Has any one seen this before? I have been in the BIOS, set the hdd as the first device to boot from.I have looked through the BIOS but I can't find anything that jumps out as different or pertaining to this Boot Message.I looked at the boot.ini file, nothing there.I am running Win2k Pro.I don't know where else to look to disable this boot interaction..
View 7 Replies
View Related
Dec 28, 2008
I recently purchased a used IBM Thinkpad r31 2656 with Windows XP Pro Edition installed. I do not have the system CD.This machine came with a 20 GB hard drive and I wanted to upgrade to a larger 160 GB drive. I purchased a Western Digital Scorpio EIDE drive, formatted it using Disk Management into 2 partitions, E: (140 GB) and F: (approx 20 GB) and copied the contents of the original 20GB drive using Norton Ghost onto partition E: without incident.I removed the old drive and replaced it with the new one. Upon startup, I get the IBM Thinkpad screen with the BIOS F1 and F12 messages at the bottom of the screen, and then the screen goes black with a blinking cursor in the upper left corner. This is as far as it goes.
View 8 Replies
View Related
May 15, 2007
have tried 1.6ghz 512mb xp pro sp2 and 1.2ghz 512mb memory 256mb graphics memory xp home sp2 drive is 250gb maxtor. the situation is if i have it in my external HDD enclosure it assigns a drive letter but i get " the device is not ready" error if i attempt to access it and if i put in my main computer as a slave drive it is detected during boot but not in windows.can anyone help me i tried deleteing the driver and having windows redetect but no luck.it might be unrelated but delayed write failure keep happening on g:/$mft and g:/$bmp.
View 19 Replies
View Related
Dec 12, 2008
Suddenly yesterday, my laptop would not boot into Windows.. runs windows xp normally.It would also not boot into safe mode.I took the hard drive out and took it to a colleagues office to get the data off with an external hd connector.He advised that my partition table had been damaged, and the data was not accessible via normal means.Wants to charge $150.00 to get the data off. At this stage, I am wanting to make sure I get my data back, so I authorized this but I am wondering, if anyone can speak to what might have caused this to happen.I do not remember installing any programs or doing anything subject prior to this occurring..
View 14 Replies
View Related
Jan 5, 2005
I have tried replacing the power supply-no change.I've tried unhooking cd-rom, floppy, replace ram & everything remains unchanged.Bios never recognizes a hard drive. I've tried several known good hard drives and the original hard drive works in another machine. It starts POST & I get HP splash then back to NO OPERATING SYSTEM FOUND, It doesn't find the CD rom drive either. What might this be related to? I've replace hard drive cable, floppy cable. The only cable I haven't replaced it the cd-rom drive.
The hard drive works as a slave in another computer. I am running virus scan and spyware on. But, why won't it work in the other computer? I'm thinking its somehow related to the bios and the fact that it cannot see the drive in the bios. I don't find anywhere in this particular bios where I can try to auto recognize the drives
View 4 Replies
View Related
May 23, 2010
i have a dell deminsion 4550 i was given. it has a pentium 4 2. 4GHZ sounded like a good machine. nut it's not i wanted to put in a newer hard drive with xp pro just like the original and it won't boot. the original was 30GB the new is 40 (40 the max for the machine?) the origanal is from 2002 the new from 2005 both maxtor diamond max 3.5 series. there online support for sayed it wont work. i know i tried but this is wired becuse almost any other computer you can put in a hard drive and it will boot
View 23 Replies
View Related
