Will Not Boot / Hard Drive Corrupted?
Dec 12, 2008
Suddenly yesterday, my laptop would not boot into Windows.. runs windows xp normally.It would also not boot into safe mode.I took the hard drive out and took it to a colleagues office to get the data off with an external hd connector.He advised that my partition table had been damaged, and the data was not accessible via normal means.Wants to charge $150.00 to get the data off. At this stage, I am wanting to make sure I get my data back, so I authorized this but I am wondering, if anyone can speak to what might have caused this to happen.I do not remember installing any programs or doing anything subject prior to this occurring..
View 14 Replies
ADVERTISEMENT
Jul 9, 2009
I guess I have a few options (as I have backed up my entire hard drive before the problem started), including hiriing someone if need be.
System info: Win XP Pro. For security use KIS 09 and Webroot SpySweeper (henceforth, WSS). This is my desktop. Laptop the same except for Win XP home.
After I upgraded the WSS to their latest version (6.1.0.128) I had problems only on desktop and only with MSWord. After two days of working on desktop problem I discovered it was the WSS upgrade, as no problems if WSS shut down or removed via Windows add/remove.
View 6 Replies
View Related
Dec 14, 2008
My Maxtor External Drive became corrupted and I needed to re-format the drive. Unfortunately, while Working in Windows XP I accidentally deleted the partition and the drive. Now I can't get Windows XP to recognize the Maxtor Drive. I tried re-booting the PC and plugging in the Maxtor USB Cable, but this did not work. The Maxtor Drive was my H: Drive. Can get Windows to recognize my Maxtor Drive? When I deleted the drive I was working in the "Computer Management" Screen. I navigated to this screen through the following path: Control Panel/Administrative Tools/Computer Management.
View 2 Replies
View Related
Mar 14, 2006
My laptop doesn't detect the external hard drive. It is strange that sometime the laptop can detect the external hard drive, but most of the time it doesn't.
I have tested 2 different external hard drive and both of them are not detected by the laptop too. When I tried it on other computer, both external cases work perfectly. I am not sure is it because of the usb driver is corrupted or what, but any helps is much appreciated. Thank you.
View 7 Replies
View Related
Mar 9, 2005
I had an NTDLR error, so I thought I could make my corrupted hard drive a slave on another computer so I could just get my stuff that way. Unfortunately when Windows XP started, it started checking the newly added slave and it took forever and started doing all this stuff, all I remember seeing is...deleting index entry yatta yatta. I don't know what it did!! But when I got into windows, all that was there what was originally on the root drive (c:/) like unzipped, My Shared Folder, and WINDOWS. NO MY DOCUMENTS, nothing..no way to even get to my user files with my favorites, documents etc. Yet, in the disk information when I right click it says the drive is occupied with the same amount as before - 80 gigs. I tried to defrag too and the files that I can't find otherwise were being defragmented! So how can I access these files? Windows xp recovery said it could not be fixed. I need this stuff, is there any other way to get it!? It's NTFS file format.
View 11 Replies
View Related
Oct 8, 2008
I recently installed a new hard drive into a friends computer and installed XP Home.
I ran all the updates and service packs.
I left later that day and let him install all his applications.
I got a call tonight from him saying he really screwed up and doesn't know what to do.
I had to follow his thinking over the phone so I hope I get this all correct.
He had trouble loading the drivers for his HP printer. He would get an error saying that a C: empHP_WebRelease folder was missing. He did manage to figure out that for some reason when I installed XP it called the Boot drive "I" instead of "C"
View 1 Replies
View Related
Sep 18, 2006
A friend of mine's computer has three hard drives. The one designated as her C drive is an 8gb thing. She has a 40gb drive along with another 30gb one. In her cmos setup I couldn't get it to boot with a drive besides that which was designated C So can I just copy and paste all the stuff in her C drive into another drive but how would I get windows to boot off of that drive instead??? She has XP home
View 3 Replies
View Related
Sep 7, 2007
I just bought a new hard drive today (120 GB Fujistsu) for my laptop computer. I installed it, and I am now trying to boot Windows XP onto it with the CD-ROM. But for some reason, the CD is not booting up and my computer keeps saying "Operating System Not Found." I tried changing the boot order from the hard drive to the CD-Drive, but that didn't help either.
View 3 Replies
View Related
Sep 26, 2005
I need to reinstall the OS on the hard drive, but I have to try and get some files off of it first or can I install new OS over the old one without a loss of my files?
View 5 Replies
View Related
Feb 15, 2005
On my first attempt to boot, the hard drive is not detecte On the second attempt, the bios always sees the hard drive and boot up is normal.I have tested the Seagate hard drive with the Seagate hard drive support tool and all is error free.This is consistent. I can't find anything in the bios where this would be switchable.
Boot up order is:1. DVD drive 2. Floppy drive 3. Hard drive Sony Vaio PCV-RZ22G.Windows XP Home. P4-2.4 1 gig ram.
View 5 Replies
View Related
Nov 28, 2006
I have two HDs installed on my comp. The master (C drive) is running WinXP home edition. The slave (E drive) was taken from my old comp which ran under Win ME (which should still be installed on it). I need to boot up with ME as a "work around" to print some files using a RIP program that is not supported by XP.Is it possible to boot from the slave HD? I looked under the setup options accessed by hitting f12 key during start up, and the "E" drive did not show up on the list of drives. Floppy, Cd drives, and a USB external drive did show up. I also tried looking under a menu accessed by hitting the f2 key...and a second hard drive showed up in that menu, but the options I had available were "off" (the setting I found it set at) or "auto", I changed it to "auto" and tried to reboot but it said "no loader_"
View 13 Replies
View Related
Sep 17, 2007
I have a Compaq SR-1200NX system that came with a 40gb drive. It was too small for all my music and apps so I installed a second drive which I then started using for files.So Drive 1 was 40 gb and Drive 2 was 80GB..I was running out of space again so I used a drive cloner to move the 40 GB drive to a 200GB Drive.Disk Management shows different according to it Drive 0 is the 80gb drive and is assigned a letter of D and Drive 1 is the 200GB drive assigned a letter of C.Both C and D have a Windows directory off of and a Program Files but the Program Files on C has more entries than the one on D.
View 2 Replies
View Related
Aug 3, 2005
Manufacturers get preinstalled WindowsXP on their harddrives? How does one build a similar environment on a blank harddrive? I've looked everywhere for some discussion about this, but can't find anything useful. I've read about WinPE and Bart'sPE and so much more, but noone seems to have a summary of how one goes about initializing a hard drive to boot and start an install of WindowsXP.
View 5 Replies
View Related
Feb 22, 2007
Anyone know how to automatically boot from the hard drive? Has any one seen this before? I have been in the BIOS, set the hdd as the first device to boot from.I have looked through the BIOS but I can't find anything that jumps out as different or pertaining to this Boot Message.I looked at the boot.ini file, nothing there.I am running Win2k Pro.I don't know where else to look to disable this boot interaction..
View 7 Replies
View Related
Dec 28, 2008
I recently purchased a used IBM Thinkpad r31 2656 with Windows XP Pro Edition installed. I do not have the system CD.This machine came with a 20 GB hard drive and I wanted to upgrade to a larger 160 GB drive. I purchased a Western Digital Scorpio EIDE drive, formatted it using Disk Management into 2 partitions, E: (140 GB) and F: (approx 20 GB) and copied the contents of the original 20GB drive using Norton Ghost onto partition E: without incident.I removed the old drive and replaced it with the new one. Upon startup, I get the IBM Thinkpad screen with the BIOS F1 and F12 messages at the bottom of the screen, and then the screen goes black with a blinking cursor in the upper left corner. This is as far as it goes.
View 8 Replies
View Related
May 15, 2007
have tried 1.6ghz 512mb xp pro sp2 and 1.2ghz 512mb memory 256mb graphics memory xp home sp2 drive is 250gb maxtor. the situation is if i have it in my external HDD enclosure it assigns a drive letter but i get " the device is not ready" error if i attempt to access it and if i put in my main computer as a slave drive it is detected during boot but not in windows.can anyone help me i tried deleteing the driver and having windows redetect but no luck.it might be unrelated but delayed write failure keep happening on g:/$mft and g:/$bmp.
View 19 Replies
View Related
Aug 16, 2008
My laptop, which was my dad's old office laptop, recently crashed. One day when I turned it on, a blue screen popped up and said there were a corrupt file or something. So I decided to reformat using a Windows XP cd, and for some reason it kept getting stuck on 91%, so I just left it on and it eventually hit 100% and completed.After everything was done, I turned it back and after the first Dell Screen bootup, the screen goes blank for 30 seconds, then a a line of white vertical lines show up at the bottom, looking at though something is loading, and it eventually finishes after a minute or two.Next the XP Bootup Screen comes up, and begins to load, but then the screen goes blank again.
View 14 Replies
View Related
Jan 5, 2005
I have tried replacing the power supply-no change.I've tried unhooking cd-rom, floppy, replace ram & everything remains unchanged.Bios never recognizes a hard drive. I've tried several known good hard drives and the original hard drive works in another machine. It starts POST & I get HP splash then back to NO OPERATING SYSTEM FOUND, It doesn't find the CD rom drive either. What might this be related to? I've replace hard drive cable, floppy cable. The only cable I haven't replaced it the cd-rom drive.
The hard drive works as a slave in another computer. I am running virus scan and spyware on. But, why won't it work in the other computer? I'm thinking its somehow related to the bios and the fact that it cannot see the drive in the bios. I don't find anywhere in this particular bios where I can try to auto recognize the drives
View 4 Replies
View Related
May 23, 2010
i have a dell deminsion 4550 i was given. it has a pentium 4 2. 4GHZ sounded like a good machine. nut it's not i wanted to put in a newer hard drive with xp pro just like the original and it won't boot. the original was 30GB the new is 40 (40 the max for the machine?) the origanal is from 2002 the new from 2005 both maxtor diamond max 3.5 series. there online support for sayed it wont work. i know i tried but this is wired becuse almost any other computer you can put in a hard drive and it will boot
View 23 Replies
View Related
Sep 8, 2008
I am having a problem similar to this poster problem http://forums.techguy.org/windows-nt...cond-boot.html I made a mistake editing my second hard drive XP registry. Now it won't boot. My other hard drive will still boot (what I'm writing from) I have a backup of the registry I made in regedit.exe and I download regcool and erunt. Is there a way I can restore me second hard drives registry from another bootable hard drive?
View 8 Replies
View Related
Jul 27, 2010
My computer automatically ran a PC tune-up and froze the screen afterwards. I cannot reboot the system ever since.
View 1 Replies
View Related
Jul 7, 2005
My computer has been sporadically crashing to blue screens due to an incompatible driver or drivers, so I tried removing two questionable drivers from the driver folder. It is clearly because I removed these drivers that the computer won't boot. So in order to fix the device driver problem I'll first have to get the operating system running, which means I must put the drivers back in place (I backed them up on the hard drive).So here comes my real question (disregarding compatibility issues which originally led to this boot problem): How can I access those drivers I backed up on the hard drive and put them back in the driver folder without booting up Windows XP? Does a boot disc have the utilities to do this? Is there some way of doing this through the BIOS? Is there an operating system or something that I can run off of a floppy disc or compact disc (which won't require any installation) that I can use to move these files? Maybe at a later date I'll create a thread addressing the driver incompatibility issue that I have, but, for now, I'm only concerned with putting those drivers back in their place so I can get to the next step.
View 7 Replies
View Related
Aug 20, 2010
I just bought a Seagate ST3400620NS SATA HDD. I want to install it as a second HDD just for storage. I currently have a ST380815AS with the OS (XP SP3) on it as the primary drive. The PC (HP DC570 SFF) boots fine with only the primary drive installed. When I add the 2nd HDD the the system recognizes that I have added a 2nd HDD. It asks me to save the settings by pressing F1. I do that. The XP boot screens displays. The blue progress bar moves once and the system reboots. I switched SATA connectors for the 2nd HDD but when I boot I get a message that I need to move the connector back to the original spot.Then I thought maybe the MOBO (Hewlett-Packard 0A64h ) only supported 1.5 gb/s. Not the case. So I am totally stumped. I checked HPs website to see if there were any updates, and there was an advisory that a different model Seagate HDD might cause a similar sounding problem but no mention of the model HDD that I own.
View 2 Replies
View Related
Feb 11, 2007
I'm new to Linux and have been using SUse 9.2 and XP systems. Hard drive set up was as follows: Swap (502MB);C drive;Linux (4 Gig);E drive (contained XP OS). Using 37 Gig Drive, Athlon 800 mhz CPU. I used PartionMagic in Windows to set up the partitions and had BootMagic disabled and all worked well. System would boot to Grub and then from there I could go to Windows XP boot. Linux partion was my active partition. Everything ran just fine...but I wasnt using Linux often and decided to try to boot directly to XP.
I decided to make my Windows OS drive E active so that I could boot directly to Windows boot instead of Grub. But, obviously, Grub still booted first. I made the mistake, then, by enabling BootMagic in the hopes I could get to Windows directly without going through Grub. Well BootMagic hid my C:Drive which was viewable simultaneously with E:drive (which contained XP OS, another setup mistake I made when partitioning...but still worked). As a result Grub is gone and I also cannot boot to XP or Linus, even after trying to activate C:drive or activating E:drive containing my XP OS. I'm pretty sure that XP recognizes C:drive as home, even though OS is on E. I have not yet used 'fixmbr' for fear of loosing data contained in C and E partitions. I've considered using spare hard drive as a new boot drive and access files from original hard drive, save them, and then start from scratch with XP....
View 2 Replies
View Related
Sep 4, 2005
I just got back from vacation and my computer wont boot up. When i turn it on, i get a black screen and it says "strike f1 for retry boot, f2 for setup utility" I am using a Dell Dimension 2400, which is only two years old. I pressed F8 to try going into safe mode and it says keyboard failure. I then tried reinstalling windows xp, while installing i got a bluce screen with a long message on it saying there was a problem with the setupdd.sys file.I dont know what else to do. Is the hard drive gone?
View 9 Replies
View Related
Aug 11, 2005
I've got an HP / Compaq notebook where the smart diags indicated a failing hard drive, HP shipped me a replacement drive under warranty and I removed the drive and used a couple of notebook hard drive adapters to hook them up as master and slave on the secondary channel of one of my desktops. I then used Ghost to clone the failing drive to the replacement since I really didn't want to have to reinstall all my applications again. The clone completed without any seeming problems however I haven't been able to get the new drive to boot up, the problem is that I just get a blank screen with a flashing cursor and no boot menu, end of story...
I happen to have a Win XP Pro full version CD and I am able to boot from the CD to the recovery console, I've tried the following: Chkdsk /R - Did find and fix some problem the first time around, but didn't find anything wrong on subsequent runs. Fixboot - ran with no problems but still no go. FixMbr - indicated "This computer appears to have a non-standard or invalid master boot record", no matter how many times I've run this and it says it's rewritten the MBR successfully it still says the same thing. In-place upgrade - I've run an in-place upgrade twice and both times it completes and says the system will reboot and the installation will continue but it still gets stuck on the reboot. Following the two in-place upgrades I've rerun all of the previous steps and I still can't get it to boot, nor do I get any type of error message that indicates what the problem is.
View 8 Replies
View Related
Dec 14, 2006
I have a hard drive from an old computer (Win 2000 Pro) that I wanted to piggy back on my new computer.Only thing is it wont recognize it since it shows it as a Master Boot Record drive.I even tried putting it in an external hard drive enclosure with a USB. System saw it and loaded it properly, but it is not available in Windows Explorer.Its just plain "not there"!
View 10 Replies
View Related
Aug 26, 2005
I cloned a hard drive which had Windows XP on it (the hard drive was going
out) and the new hard drive would not boot unless I booted first to a floippy with boot.ini, ntldr, and ntdetect.com. Have tried recovery console and everything else I can think of, but the system WILL NOT boot to the hard drive. I checked the boot.ini file for improper boot, but everything looks The old hard drive had two partitions on it, but the hidden partition was corrupt so I deleted it. I changed the boot.ini file settings accordingly.
View 1 Replies
View Related
Jul 26, 2005
Can anybody point me to the instructions about how to install XP Pro to a single Win98 hard drive - to make it dual boot, like Win 2k? I've been looking all around the internet and the only thing I've found is an XP dual boot on a 2nd hard drive.
View 14 Replies
View Related
Feb 22, 2007
I have Windows XP home edition already installed on my system and I for some reasons I want to reinstall them on a different hard drive (I have 2 IDE drives). It is very important that my initial windows setup, the one I am running on now, will be working after the new installation too. Is that possible?
View 5 Replies
View Related
Sep 2, 2009
I did a new hard drive install. When the new HD was complete I thought I would copy the data from the old drive to the new.They both still had os installed They were both connected to the system at the same time.When I finished, I removed the old drive. The new drive wouldn't boot. "Disk boot failure, insert system disk and press enter". After recovery disk completed, the system booted fine. I could reboot from the shutdown option.
The problem I have is when the system is shutdown completely. It requires the system disk again. It will reboot after the system disk is reinstalled. I continually get the "Disk boot failure, insert system disk and press enter" error message.During bootup after a shutdown, I can F2 into the bios before the error message. It will allow me to exit and then windows will boot without the error message.
View 19 Replies
View Related
