have tried 1.6ghz 512mb xp pro sp2 and 1.2ghz 512mb memory 256mb graphics memory xp home sp2 drive is 250gb maxtor. the situation is if i have it in my external HDD enclosure it assigns a drive letter but i get " the device is not ready" error if i attempt to access it and if i put in my main computer as a slave drive it is detected during boot but not in windows.can anyone help me i tried deleteing the driver and having windows redetect but no luck.it might be unrelated but delayed write failure keep happening on g:/$mft and g:/$bmp.
I get an error on the boot and it tells me that the hard drive can't be detected. then just goes to a blinking curser on a blank black screen.I looked in the bios and read what other forums wrote and things seem to be set correctly.I did switch it to enable UEFI Boot and that just made it to where I can't get into the BIOS Settings now.I am running xp and am connected to a central server.I have only had the pc for a year with no major problems.I can't get a hold of my IT guy since it is the weekend.
i have use more than 10 disk of windows xp to format compaq pressario v3000.. when i press enter to format.. it shown that the hard drive is not installed. what should i do sir?
Recently I opened up my computer to take the dust out of it as I have before. I hadent done so in a long time so there was some caked on dust on some components. I took the RAM out an cleaned it, re-installed it. I also took my vidoe card out because the heat sink had been cloged with dust aswell. After putting everything back and restarting my computer I recived this msg before windows start up. Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEMand it followed with instruction to use the xp setup disk to repair the problem. so I threw the windows CD in, and tried to repair however the program tells me I have no hard drive installed. Which I do since my computer is 3 years old now and has been working fine. I hadent changed any bios settings, I never disconnected the hard dirve either.
I recently installed a new hard drive into a friends computer and installed XP Home. I ran all the updates and service packs.
I left later that day and let him install all his applications.
I got a call tonight from him saying he really screwed up and doesn't know what to do. I had to follow his thinking over the phone so I hope I get this all correct.
He had trouble loading the drivers for his HP printer. He would get an error saying that a C: empHP_WebRelease folder was missing. He did manage to figure out that for some reason when I installed XP it called the Boot drive "I" instead of "C"
I am running a AMD 64, 1 GIG memory, Asus motherboard, real nice computer.Everything has been working fine until last night. I received the BLUE SCREEN and now when I try to re-boot I get a message which reads NO HARD DISK DRIVE DETECTED.I dont want to lose all the family photos and such that I have loaded up on this machine.
A friend of mine's computer has three hard drives. The one designated as her C drive is an 8gb thing. She has a 40gb drive along with another 30gb one. In her cmos setup I couldn't get it to boot with a drive besides that which was designated C So can I just copy and paste all the stuff in her C drive into another drive but how would I get windows to boot off of that drive instead??? She has XP home
I just bought a new hard drive today (120 GB Fujistsu) for my laptop computer. I installed it, and I am now trying to boot Windows XP onto it with the CD-ROM. But for some reason, the CD is not booting up and my computer keeps saying "Operating System Not Found." I tried changing the boot order from the hard drive to the CD-Drive, but that didn't help either.
I need to reinstall the OS on the hard drive, but I have to try and get some files off of it first or can I install new OS over the old one without a loss of my files?
On my first attempt to boot, the hard drive is not detecte On the second attempt, the bios always sees the hard drive and boot up is normal.I have tested the Seagate hard drive with the Seagate hard drive support tool and all is error free.This is consistent. I can't find anything in the bios where this would be switchable. Boot up order is:1. DVD drive 2. Floppy drive 3. Hard drive Sony Vaio PCV-RZ22G.Windows XP Home. P4-2.4 1 gig ram.
I have two HDs installed on my comp. The master (C drive) is running WinXP home edition. The slave (E drive) was taken from my old comp which ran under Win ME (which should still be installed on it). I need to boot up with ME as a "work around" to print some files using a RIP program that is not supported by XP.Is it possible to boot from the slave HD? I looked under the setup options accessed by hitting f12 key during start up, and the "E" drive did not show up on the list of drives. Floppy, Cd drives, and a USB external drive did show up. I also tried looking under a menu accessed by hitting the f2 key...and a second hard drive showed up in that menu, but the options I had available were "off" (the setting I found it set at) or "auto", I changed it to "auto" and tried to reboot but it said "no loader_"
I have a Compaq SR-1200NX system that came with a 40gb drive. It was too small for all my music and apps so I installed a second drive which I then started using for files.So Drive 1 was 40 gb and Drive 2 was 80GB..I was running out of space again so I used a drive cloner to move the 40 GB drive to a 200GB Drive.Disk Management shows different according to it Drive 0 is the 80gb drive and is assigned a letter of D and Drive 1 is the 200GB drive assigned a letter of C.Both C and D have a Windows directory off of and a Program Files but the Program Files on C has more entries than the one on D.
Manufacturers get preinstalled WindowsXP on their harddrives? How does one build a similar environment on a blank harddrive? I've looked everywhere for some discussion about this, but can't find anything useful. I've read about WinPE and Bart'sPE and so much more, but noone seems to have a summary of how one goes about initializing a hard drive to boot and start an install of WindowsXP.
Anyone know how to automatically boot from the hard drive? Has any one seen this before? I have been in the BIOS, set the hdd as the first device to boot from.I have looked through the BIOS but I can't find anything that jumps out as different or pertaining to this Boot Message.I looked at the boot.ini file, nothing there.I am running Win2k Pro.I don't know where else to look to disable this boot interaction..
I recently purchased a used IBM Thinkpad r31 2656 with Windows XP Pro Edition installed. I do not have the system CD.This machine came with a 20 GB hard drive and I wanted to upgrade to a larger 160 GB drive. I purchased a Western Digital Scorpio EIDE drive, formatted it using Disk Management into 2 partitions, E: (140 GB) and F: (approx 20 GB) and copied the contents of the original 20GB drive using Norton Ghost onto partition E: without incident.I removed the old drive and replaced it with the new one. Upon startup, I get the IBM Thinkpad screen with the BIOS F1 and F12 messages at the bottom of the screen, and then the screen goes black with a blinking cursor in the upper left corner. This is as far as it goes.
My laptop, which was my dad's old office laptop, recently crashed. One day when I turned it on, a blue screen popped up and said there were a corrupt file or something. So I decided to reformat using a Windows XP cd, and for some reason it kept getting stuck on 91%, so I just left it on and it eventually hit 100% and completed.After everything was done, I turned it back and after the first Dell Screen bootup, the screen goes blank for 30 seconds, then a a line of white vertical lines show up at the bottom, looking at though something is loading, and it eventually finishes after a minute or two.Next the XP Bootup Screen comes up, and begins to load, but then the screen goes blank again.
Suddenly yesterday, my laptop would not boot into Windows.. runs windows xp normally.It would also not boot into safe mode.I took the hard drive out and took it to a colleagues office to get the data off with an external hd connector.He advised that my partition table had been damaged, and the data was not accessible via normal means.Wants to charge $150.00 to get the data off. At this stage, I am wanting to make sure I get my data back, so I authorized this but I am wondering, if anyone can speak to what might have caused this to happen.I do not remember installing any programs or doing anything subject prior to this occurring..
Dumped Vista and installed XPP. Went smoothly, except get this message on start-up. Adapter 1 -no array defined -no hard disc detected continues on and windows starts, no problem.
i have a problem with my cd-rom, i asked a technician to re-format my laptop it is a acer aspire 3620. all other parts of the systems works normally but then my cd-rom is not functioning the comp cant read the cd-rom.. it does not even show on the computer system.
Although a systems check says my cd/dvd drive is installed and working fine, neither winamp or Sonic DigitalMedia LE detect a suitable drive when commanded to burn a disc.
I have windows xp installed in my pc,but for last 2 days my pc isn't detecting dvd drive in my computer but its there in bios setup.I tried all the techniques posted here but none of them worked..what i did,i installed xp in another drive and now its showing the dvd drive.So anyone could help me out to detect my dvd drive in the initial case.
I have tried replacing the power supply-no change.I've tried unhooking cd-rom, floppy, replace ram & everything remains unchanged.Bios never recognizes a hard drive. I've tried several known good hard drives and the original hard drive works in another machine. It starts POST & I get HP splash then back to NO OPERATING SYSTEM FOUND, It doesn't find the CD rom drive either. What might this be related to? I've replace hard drive cable, floppy cable. The only cable I haven't replaced it the cd-rom drive.
The hard drive works as a slave in another computer. I am running virus scan and spyware on. But, why won't it work in the other computer? I'm thinking its somehow related to the bios and the fact that it cannot see the drive in the bios. I don't find anywhere in this particular bios where I can try to auto recognize the drives
i have a dell deminsion 4550 i was given. it has a pentium 4 2. 4GHZ sounded like a good machine. nut it's not i wanted to put in a newer hard drive with xp pro just like the original and it won't boot. the original was 30GB the new is 40 (40 the max for the machine?) the origanal is from 2002 the new from 2005 both maxtor diamond max 3.5 series. there online support for sayed it wont work. i know i tried but this is wired becuse almost any other computer you can put in a hard drive and it will boot
I am having a problem similar to this poster problem http://forums.techguy.org/windows-nt...cond-boot.html I made a mistake editing my second hard drive XP registry. Now it won't boot. My other hard drive will still boot (what I'm writing from) I have a backup of the registry I made in regedit.exe and I download regcool and erunt. Is there a way I can restore me second hard drives registry from another bootable hard drive?
My computer has been sporadically crashing to blue screens due to an incompatible driver or drivers, so I tried removing two questionable drivers from the driver folder. It is clearly because I removed these drivers that the computer won't boot. So in order to fix the device driver problem I'll first have to get the operating system running, which means I must put the drivers back in place (I backed them up on the hard drive).So here comes my real question (disregarding compatibility issues which originally led to this boot problem): How can I access those drivers I backed up on the hard drive and put them back in the driver folder without booting up Windows XP? Does a boot disc have the utilities to do this? Is there some way of doing this through the BIOS? Is there an operating system or something that I can run off of a floppy disc or compact disc (which won't require any installation) that I can use to move these files? Maybe at a later date I'll create a thread addressing the driver incompatibility issue that I have, but, for now, I'm only concerned with putting those drivers back in their place so I can get to the next step.
I just bought a Seagate ST3400620NS SATA HDD. I want to install it as a second HDD just for storage. I currently have a ST380815AS with the OS (XP SP3) on it as the primary drive. The PC (HP DC570 SFF) boots fine with only the primary drive installed. When I add the 2nd HDD the the system recognizes that I have added a 2nd HDD. It asks me to save the settings by pressing F1. I do that. The XP boot screens displays. The blue progress bar moves once and the system reboots. I switched SATA connectors for the 2nd HDD but when I boot I get a message that I need to move the connector back to the original spot.Then I thought maybe the MOBO (Hewlett-Packard 0A64h ) only supported 1.5 gb/s. Not the case. So I am totally stumped. I checked HPs website to see if there were any updates, and there was an advisory that a different model Seagate HDD might cause a similar sounding problem but no mention of the model HDD that I own.
I'm new to Linux and have been using SUse 9.2 and XP systems. Hard drive set up was as follows: Swap (502MB);C drive;Linux (4 Gig);E drive (contained XP OS). Using 37 Gig Drive, Athlon 800 mhz CPU. I used PartionMagic in Windows to set up the partitions and had BootMagic disabled and all worked well. System would boot to Grub and then from there I could go to Windows XP boot. Linux partion was my active partition. Everything ran just fine...but I wasnt using Linux often and decided to try to boot directly to XP.
I decided to make my Windows OS drive E active so that I could boot directly to Windows boot instead of Grub. But, obviously, Grub still booted first. I made the mistake, then, by enabling BootMagic in the hopes I could get to Windows directly without going through Grub. Well BootMagic hid my C:Drive which was viewable simultaneously with E:drive (which contained XP OS, another setup mistake I made when partitioning...but still worked). As a result Grub is gone and I also cannot boot to XP or Linus, even after trying to activate C:drive or activating E:drive containing my XP OS. I'm pretty sure that XP recognizes C:drive as home, even though OS is on E. I have not yet used 'fixmbr' for fear of loosing data contained in C and E partitions. I've considered using spare hard drive as a new boot drive and access files from original hard drive, save them, and then start from scratch with XP....
I just got back from vacation and my computer wont boot up. When i turn it on, i get a black screen and it says "strike f1 for retry boot, f2 for setup utility" I am using a Dell Dimension 2400, which is only two years old. I pressed F8 to try going into safe mode and it says keyboard failure. I then tried reinstalling windows xp, while installing i got a bluce screen with a long message on it saying there was a problem with the setupdd.sys file.I dont know what else to do. Is the hard drive gone?
I've got an HP / Compaq notebook where the smart diags indicated a failing hard drive, HP shipped me a replacement drive under warranty and I removed the drive and used a couple of notebook hard drive adapters to hook them up as master and slave on the secondary channel of one of my desktops. I then used Ghost to clone the failing drive to the replacement since I really didn't want to have to reinstall all my applications again. The clone completed without any seeming problems however I haven't been able to get the new drive to boot up, the problem is that I just get a blank screen with a flashing cursor and no boot menu, end of story...
I happen to have a Win XP Pro full version CD and I am able to boot from the CD to the recovery console, I've tried the following: Chkdsk /R - Did find and fix some problem the first time around, but didn't find anything wrong on subsequent runs. Fixboot - ran with no problems but still no go. FixMbr - indicated "This computer appears to have a non-standard or invalid master boot record", no matter how many times I've run this and it says it's rewritten the MBR successfully it still says the same thing. In-place upgrade - I've run an in-place upgrade twice and both times it completes and says the system will reboot and the installation will continue but it still gets stuck on the reboot. Following the two in-place upgrades I've rerun all of the previous steps and I still can't get it to boot, nor do I get any type of error message that indicates what the problem is.
