I have Windows XP home edition already installed on my system and I for some reasons I want to reinstall them on a different hard drive (I have 2 IDE drives). It is very important that my initial windows setup, the one I am running on now, will be working after the new installation too. Is that possible?
View 5 RepliesCan anybody point me to the instructions about how to install XP Pro to a single Win98 hard drive - to make it dual boot, like Win 2k? I've been looking all around the internet and the only thing I've found is an XP dual boot on a 2nd hard drive.
View 14 Replies View RelatedI have a dual boot system (2 hard drives) booting Suse and XP and boot up through Suse's built in boot manager which gives me the option of booting to Windows or Linux. But since I barely ever use Linux I want to delete it off the 2nd drive so I can use it for a storage drive, so I'm wondering how to replace the Windows Master Boot Record so I can just boot into my XP drive. I'm scared that once I delete/reformat the contents of the 2nd hard drive (I'll probably use Partition Magic to do this through my XP drive) that I won't be able to boot XP up anymore. So before I do anything I want to just be able to boot into XP and bypass the linux drive before I delete it to make sure everything is ok.
View 2 Replies View RelatedI have Win XP home installed as OEM software on the C drive of my PC.
I also have this OS as a Norton Ghost file supplied with the PC as a
"Recovery CD".
I have installed a second hard drive designated "D"
This all works fine.
I wish to install Win 2000 (which I have on a Microsoft cd) on the second HD.
I would then hope at boot - up to be given the choice of which OS to load.
Can anyone tell me what is the simplest way to do this?
I'm trying to dual boot 2 different installs of xp pro from 2 drives using the Windows boot loader. I've edited the boot.ini every possible way I can think of, but nothing works. I've done this plenty of times using a linux boot loader or dual booting from a single drive but I cant figure this out. I haven't been able to find any reference to this subject anywhere, but I think it would work. Anybody have a clue as to how to do this? I know I can use a different boot manager to accomplish this, I just wanted to make the Win boot.ini work. Or, does anybody know of a good boot manager if I cant make this work?
View 9 Replies View RelatedI am attempting to install Win XP Pro into a second partition to dual boot with an original install of Win XP Home. Both are installed and working with the exception of an application that I installed in Win XP Pro that apparently has some hardcoded assumptions that the product is installed on the C: drive. Since Win XP Home was the originally installed OS, it has drive letter C:, with Win XP Pro getting assigned drive letter E: when it boots.
Ideally, I would like to have each OS bootup with its boot partition appearing as drive letter C:. The other OSes boot partition doesn't necessarily have to even be seen when the other OS boots, although it would be nice. There is also a third partition on the drive which I need to be available to each OS when booted, again preferably as the same drive letter. There are also a CD-R and CD-RW drive installed, which prior to the Win XP Pro install appeared as drive letters D: and E:.At this point I am looking for the easiest/quickest way to obtain the desired results, ideally without having to uninstall/remove either or both. I am willing to look at a third party boot and/or partition manager as well as manually switching between active partitions within Win XP Home or Pro prior to reboot.
I would like to load XP Pro on an XP Home PC and have a dual boot (do not want to lose the software by a fresh install) Can I have 2 operating systems on the same partition?
View 14 Replies View RelatedWith all reasons aside for now (mainly because it would be too much typing), if I were to create another small partition other than my main "C" partition on my 320 Gig drive and install XP Pro on the small partition then would that cause problems and conflicts with my main C partition? The small partition that XP pro would be going on would have the drive letter "G" since I already have "D, E and F" taken up by another physical hard drive, DVD-RAM drive and Removable Disk.
So basically my question is that if I make a small partition "G" on my 320 that has my main partition "C" on it, would I be able to boot normally with each one and not have any conflicts? Also, I assume I would have to download a boot loader. Which boot loader is the best to use? And, this is kind of an experiment process in that I don't know that I will even keep the G partition so if I were to reformat the "G" partition and add the space back to the "C" partition then how would I go about removing the no longer needed boot loader?
can I create a dual boot system. One side Pro and the other Home? Or better yet, can I install pro over home and keep my computer intact?
View 11 Replies View RelatedI upgraded an XP Home PC to XP Pro using an upgrade disk and some how have got a dual boot situation. On start up I get the option to boot up in XP Home or XP Pro. I just want XP pro how can I get it to cancel the dual boot and go straight to XP Pro
View 3 Replies View RelatedI was having trouble accessing my Windows XP Home edition from my dual boot Windows XP Home/Windows 2000 Professional system. I used both Win2K and WinXP CDs and their respective repair functions and no help. When I select the Windows XP Home operating system from the boot select menu I get a message that some file for Windows 2000 is corrupt and to use the Windows 2000 CD or F8 function.
View 4 Replies View RelatedI have a four year old eMachines that has expired and isn't worth repairing. I would like to use the OEM Windows XP Home restore disc from this computer to dual-boot my Vista machine (HP Pavilion a1730n). Is this:
1. possible?
2. ethical?
I want to do this because I can't use many of my programs on the Vista machine. If I can dual-boot the eMachines restore disc I can use Windows Home until vendors catch up with Vista.
All things were fine and I had XP pro and XP home installed and working on seperate drives. I have just reinstalled XP pro and now on booting, no option to choose either operating system appears. I have done some searching and have seen references to copying a boot file from the CD and placing it into the XP home operating system to fix this. The instructions were not that detailed and not directly related to having 2 XP installs. nearly all search results I have found related to Xp dual booting with Vista. I have been thinking of now copying ALL the files from the XP Home operating system into the new XP Pro and then reinstalling the XP Home system. Sigh. I cannot use the system repair/recovery option as I do not know the Admin password. where did I put that? Is there an easy fix to get the dual boot working again?
View 8 Replies View RelatedI recently purchased a notebook with XP Home SP@ proinstalled. I upgraded to XP Pro but had to do a complete intall rather than an upgrade because my xp pro update cd was older than xp home sp2. I now have a windows (xp home) and a windowsp (xp pro) folder.
View 1 Replies View RelatedI have installed XP Pro on my D drive in order to practise for the MCDST. However the WLAN drivers for XP Home don't work for XP Pro. Do XP Home and XP Pro require different drivers? Because all other hardware works fine.
View 2 Replies View RelatedAbout a month ago I decided to get a much bigger hard drive (500GB) but theres no way I have time to reinstall everything so I decided to clone my existing hard drive, I tried acronis and the clone went superfast and put everything onto a single partition the full size of the new disk - when I tried to boot up with the disk, it didnt boot. It got to the pale blue screen that usually says 'welcome' but instead it had a small windows XP logo and that was it, it didnt go any further. I contacted support and they were no help so last night I tried another free software hdclone - it took about 6 hours but I actually managed to boot up from the new disk - but the new drive had a single partition the exact same size as the old one and the rest was unused space - no problem
View 10 Replies View RelatedIs it possible to dual boot between to different hard drives both running Windows XP? I just bought a new hard drive and I want to install it on the same machine and have a drive just for me and my wife and the kids can have their own. They down load so much stuff and cause the system to boot and run so slow. I'm tired of restoring it just to find 2 weeks later it's like it was.
View 2 Replies View RelatedAn external hard drive. When it is on & I try to boot,I get the following error : Invalid system disk Replace the disk, and then press any key I then have to turn off the external & press any key to get it to boot. Is there a way that I can boot with that external turned on. Some setting I need to change perhaps? I have an E-Machines computer about 2 years old.
View 6 Replies View RelatedI have a dual boot system with both having windows xp.When I load into the 1st XP installation, the following is the list and assignment of the drives:
C : Local Disk (contains the 1st XP installation)
D : CD Drive
E : Local Disk (contains data and also few installed program folders)
F : Local Disk (contains the 2nd XP installation)
Initially when I noticed this drive arrangement after setting up the dual boot, I just left it as is, not knowing what to do.But nowadays I am having a lot of problems as the installed programs are not accessible because their target location keeps changing, everytime I keep switching between the two operating systems.How can I solve this problem?Can I do the follwing : Load into the 1st XP installation, and then change the drive letters (of the last three drives) such that they are matching the drive assignment as seen when loading into the 2nd XP installation.Here in a way I have kept the same drive name for both installations.But Will this work?I also have some of the program folders for the 1st xp installation stored in E drive, and after changing it to D drive, will all the links be properly converted upon restart?
Recently I installed Ubuntu Linux on a partition on my secondary hard drive (it's a worthwhile education, I'll give it that). Since then, when in Windows, the remaining space, used for games, alternates between being accessible and being unaccessible. What's the go?For example, when I go in My Computer and try to open D: drive this is the message i receive:D: is not accessible The parameter is incorrect.
View 3 Replies View RelatedI have successfully cloned my primary c partition of a dual boot system with XP Pro on the 1st primary partition c: and XP Pro on the 2nd primary partition as d: I can boot into my XP on the c: drive with no problem, but when I attempt to boot into my XP on the D drive it hangs on the blue screen right before booting into the user profiles. And believe it or not it continuously loops making the windows startup sound and the shutdown sound. It does the same in safe mode. I will try to explain the process on what I did so it can help you experts figure out this dilemma that I'm having. My old drive an IDE 100GB IBM primary drive was partitioned into 3 parts:
c: 30GB FAT32 primary
d: 30GB FAT32 "
e: 30gb FAT32 "
All ran great in XP's on c: ,D: and :e except that i was running out of room in all the partitions and the drive is getting very old , I think (5yrs). I used XXClone Pro v.0.58.0 to clone my old c: and d: partitions to a WD IDE 160GB. I tried many other cloning proggys like Acronis True Image, Drive Clone, Paragon Drive Copy, Drive Image 2002, HDClone 3.1 Pro but they all either changed my new drive NTFS file system to FAT32 or made exact same size copies. I formatted and partitioned my new drive as follows:..............
I accidentally deleted a partition and later found out that my system is dead....The only way I recover out of that is I reinstall Windows and then install grub again to recover the Linux partition. But I feel the delete partition is a very rapid process just taking seconds and in that I don't think files would be deleted, so I feel potentially I can recover the deleted partitions including the boot partition. But I don't know how to do it. Also now when the boot partition is deleted and the system is not booting up what should be done to recover the system and data?
View 5 Replies View RelatedI have a dual boot environment with two Win XP installed on different disks, XP1 and XP2 . XP1 was installed first and contains the boot files (NTLDR, boot.ini...) and XP2 came second. Now, I would like to keep XP2 and get rid of XP1. How can i delete XP1 since it contains the boot files? if i delete XP1 i am afraid to not be able to boot on XP2.
View 14 Replies View RelatedI recently installed a new hard drive into a friends computer and installed XP Home.
I ran all the updates and service packs.
I left later that day and let him install all his applications.
I got a call tonight from him saying he really screwed up and doesn't know what to do.
I had to follow his thinking over the phone so I hope I get this all correct.
He had trouble loading the drivers for his HP printer. He would get an error saying that a C: empHP_WebRelease folder was missing. He did manage to figure out that for some reason when I installed XP it called the Boot drive "I" instead of "C"
I will be formatting my drive now and I want to install XP and Vista so that I can choose which one to load at the start of booting up. How would I do this? Do I need to create two partitions, install both operating systems on the separate drives and then done? Or is there more to it? Which operating system should I install first, if there is any difference
View 1 Replies View RelatedI have two hard drives, both of them with Win 2000 Pro. The First has been the master in machine one from the start. The second HDD has been in machine twoand that machine has crashed so bad that it is not worth the time, energy or money to fix it. This second HDD has important data on it that is only accessable through older programs that are only on this drive. (It is a church membership data base program and a church financial record program) I have the added problem that no one in the office has a clue where the install disk are for these programs and they are not where they are suppose to be (this was before my time). I would like to place the second HDD in the first machine and set up a dual boot so the user can choose which drive to operate from. There is the added problem that the computers only have a restore disk that came from Dell and not a full Win 2000 Pro CD.
View 4 Replies View RelatedI have a computer in which I have an XP dual boot on 2 separate hard drives (160 & 120 GB).I have had this particular combination in working order since 4/07. A few days ago my 2nd drive (F) would not boot. I get only a blank, black screen and nothing else NO error messages or warnings. My C drive will boot normally, no problems.The drive is "seen" in BIOS, startup and in my computer on the C drive. The drive is there but the darned thing just will not boot. I have tried using "fixboot" & "fixmbr" to no avail!
View 11 Replies View RelatedI'm running Windows XP and want to migrate to another hard drive. I used the excellent open source utility CloneZilla to clone my hard drive to the new drive, and used the equally excellent EASEUS Partition Master to resize the cloned partition to fill the new drive. Next I edited boot.ini on my original Windows to add the cloned drive as another boot option. After a bit of trial and error guessing the disk path for boot.ini I was able to dual boot into the original or the clone.
Now I want to boot off the new drive directly without dual booting off the original drive as I intend to wipe the old drive after I am satisfied that everything is working OK. But here's the catch: the original drive is SATA, while the new drive is IDE. So I can't simply swap the cables around and be done with it. So I configured the boot sequence in the bios to use "HDD-0" instead of "SCSI" (for some reason this old BIOS thinks SATA is SCSI) and restart. The system gets as far as detecting the boot source (floppy first, then CD-ROM) and then stops. No "operating system not found" or any other kind of error, just a blinking cursor and no activity.
I get exactly the same behavior using "HDD-1" to "HDD-3" as the boot drive in the bios. The bios detects the drive itself OK. I have also edited boot.ini on the new drive to point to the same location I used to add it to the dual boot menu on the original drive, but that didn't help. I also booted off the Windows installer, went into Recovery mode and ran Fixmbr and Fixboot with the original SATA drive unplugged and without specifying a device name.
I have successfully cloned my primary c partition of a dual boot system with XP Pro on the 1st primary partition c: and XP Pro on the 2nd primary partition as d: I can boot into my XP on the c: drive with no problem, but when I attempt to boot into my XP on the D drive it hangs on the blue screen right before booting into the user profiles. And believe it or not it continuously loops making the windows startup sound and the shutdown sound. It does the same in safe mode. I will try to explain the process on what I did so it can help you experts figure out this dilemma
View 3 Replies View RelatedI recently recieved a Maxtor 40 GB Hard drive. i have installed everything Correctly ie. Power, Cable, ect. I have tried every single configuration of Jumper settings. It was reconized in bios, but it wouldn't come up as an icon in Xp. I have Xp Home W/SP2
View 5 Replies View Relatedhow to reformat my hard drive? I'm trying to load XP Pro but when I put the disc in it tells me that the version on my computer is newer than the one I'm trying to put in so it can't install it. So how do I format from XP Home edition?
View 3 Replies View Related