Dual Boot With Home And Pro?
Nov 8, 2008
With all reasons aside for now (mainly because it would be too much typing), if I were to create another small partition other than my main "C" partition on my 320 Gig drive and install XP Pro on the small partition then would that cause problems and conflicts with my main C partition? The small partition that XP pro would be going on would have the drive letter "G" since I already have "D, E and F" taken up by another physical hard drive, DVD-RAM drive and Removable Disk.
So basically my question is that if I make a small partition "G" on my 320 that has my main partition "C" on it, would I be able to boot normally with each one and not have any conflicts? Also, I assume I would have to download a boot loader. Which boot loader is the best to use? And, this is kind of an experiment process in that I don't know that I will even keep the G partition so if I were to reformat the "G" partition and add the space back to the "C" partition then how would I go about removing the no longer needed boot loader?
View 3 Replies
ADVERTISEMENT
Jun 11, 2005
I am attempting to install Win XP Pro into a second partition to dual boot with an original install of Win XP Home. Both are installed and working with the exception of an application that I installed in Win XP Pro that apparently has some hardcoded assumptions that the product is installed on the C: drive. Since Win XP Home was the originally installed OS, it has drive letter C:, with Win XP Pro getting assigned drive letter E: when it boots.
Ideally, I would like to have each OS bootup with its boot partition appearing as drive letter C:. The other OSes boot partition doesn't necessarily have to even be seen when the other OS boots, although it would be nice. There is also a third partition on the drive which I need to be available to each OS when booted, again preferably as the same drive letter. There are also a CD-R and CD-RW drive installed, which prior to the Win XP Pro install appeared as drive letters D: and E:.At this point I am looking for the easiest/quickest way to obtain the desired results, ideally without having to uninstall/remove either or both. I am willing to look at a third party boot and/or partition manager as well as manually switching between active partitions within Win XP Home or Pro prior to reboot.
View 1 Replies
View Related
Dec 14, 2005
I would like to load XP Pro on an XP Home PC and have a dual boot (do not want to lose the software by a fresh install) Can I have 2 operating systems on the same partition?
View 14 Replies
View Related
Sep 1, 2005
can I create a dual boot system. One side Pro and the other Home? Or better yet, can I install pro over home and keep my computer intact?
View 11 Replies
View Related
Jun 24, 2005
I upgraded an XP Home PC to XP Pro using an upgrade disk and some how have got a dual boot situation. On start up I get the option to boot up in XP Home or XP Pro. I just want XP pro how can I get it to cancel the dual boot and go straight to XP Pro
View 3 Replies
View Related
Apr 30, 2007
I was having trouble accessing my Windows XP Home edition from my dual boot Windows XP Home/Windows 2000 Professional system. I used both Win2K and WinXP CDs and their respective repair functions and no help. When I select the Windows XP Home operating system from the boot select menu I get a message that some file for Windows 2000 is corrupt and to use the Windows 2000 CD or F8 function.
View 4 Replies
View Related
Feb 14, 2007
I have a four year old eMachines that has expired and isn't worth repairing. I would like to use the OEM Windows XP Home restore disc from this computer to dual-boot my Vista machine (HP Pavilion a1730n). Is this:
1. possible?
2. ethical?
I want to do this because I can't use many of my programs on the Vista machine. If I can dual-boot the eMachines restore disc I can use Windows Home until vendors catch up with Vista.
View 4 Replies
View Related
Feb 20, 2008
All things were fine and I had XP pro and XP home installed and working on seperate drives. I have just reinstalled XP pro and now on booting, no option to choose either operating system appears. I have done some searching and have seen references to copying a boot file from the CD and placing it into the XP home operating system to fix this. The instructions were not that detailed and not directly related to having 2 XP installs. nearly all search results I have found related to Xp dual booting with Vista. I have been thinking of now copying ALL the files from the XP Home operating system into the new XP Pro and then reinstalling the XP Home system. Sigh. I cannot use the system repair/recovery option as I do not know the Admin password. where did I put that? Is there an easy fix to get the dual boot working again?
View 8 Replies
View Related
Aug 1, 2005
I recently purchased a notebook with XP Home SP@ proinstalled. I upgraded to XP Pro but had to do a complete intall rather than an upgrade because my xp pro update cd was older than xp home sp2. I now have a windows (xp home) and a windowsp (xp pro) folder.
View 1 Replies
View Related
Mar 9, 2009
I have installed XP Pro on my D drive in order to practise for the MCDST. However the WLAN drivers for XP Home don't work for XP Pro. Do XP Home and XP Pro require different drivers? Because all other hardware works fine.
View 2 Replies
View Related
Feb 22, 2007
I have Windows XP home edition already installed on my system and I for some reasons I want to reinstall them on a different hard drive (I have 2 IDE drives). It is very important that my initial windows setup, the one I am running on now, will be working after the new installation too. Is that possible?
View 5 Replies
View Related
Jun 28, 2010
I have been trying to install Windows XP as a second OS as I already have Windows 7 Ultimate installed. Unfortunately, after I select a partition, format it, and reboot the system stalls on the screen after the BIOS that has something to do with a list of devices and such. After 10 or so seconds a few characters and letters go blank randomly on the page. I rebooted and selected my cd drive as the boot device and accidentally didn't press a button in time to boot and a bunch of highlighted numbers were thrown all over the screen and a random smiley face on one of the lines.
View 12 Replies
View Related
Jan 12, 2009
I'm trying to dual boot 2 different installs of xp pro from 2 drives using the Windows boot loader. I've edited the boot.ini every possible way I can think of, but nothing works. I've done this plenty of times using a linux boot loader or dual booting from a single drive but I cant figure this out. I haven't been able to find any reference to this subject anywhere, but I think it would work. Anybody have a clue as to how to do this? I know I can use a different boot manager to accomplish this, I just wanted to make the Win boot.ini work. Or, does anybody know of a good boot manager if I cant make this work?
View 9 Replies
View Related
Aug 29, 2009
I have dual booting on my PC with Vista home premium on a 500 Gb SATA disk and XP Pro on a 250Gb SATA, both internal. Vista no longer holds terrors for me and I'd like to get rid of XP and regain better use of the 250Gb HD. Can I just remove XP from the control panel in the XP boot or is it a lot more complicated?I don't really want to re format the XP drive as I'd have to transfer a lot of data and files
View 3 Replies
View Related
Jul 23, 2005
I have Win XP home installed as OEM software on the C drive of my PC.
I also have this OS as a Norton Ghost file supplied with the PC as a
"Recovery CD".
I have installed a second hard drive designated "D"
This all works fine.
I wish to install Win 2000 (which I have on a Microsoft cd) on the second HD.
I would then hope at boot - up to be given the choice of which OS to load.
Can anyone tell me what is the simplest way to do this?
View 3 Replies
View Related
Feb 1, 2008
I am running Windows XP and would really like to share the hard drive with another OS "Linux" and dual boot.
View 1 Replies
View Related
Nov 21, 2008
i currentlly have a 500 gb hard drive with windows xp home on it and i have an extra hard drive sitting on my desk, a seagate barracuda 1 tb hard drive, and i will be purhasing xp por 64-bit, and i wanna know if i can just put in my 1 tb hard drive and install xp pro on that and then to choose wich os to run, i know dual botting is possible im just not sure how i am going to go about installing it onto my 1 tb hard drive
View 5 Replies
View Related
Dec 29, 2005
I recently built my new dual core PC and I have set up my bios, etc. I'm ready to install an OS. What I'm wondering is - what is better for a dual core pc? XP Pro or XP Home and why?
View 2 Replies
View Related
May 9, 2007
Is it possible that having both windows xp home and pro installed on my computer could mess things up. I have this, and have noticed programs that used to work just fine crash.
View 2 Replies
View Related
Jun 24, 2005
I Installed a 2nd HD and cloned my first HD to it as a backup and would like to be able to dual boot. This is XP Pro. I would like to know what numbers to use in multi, disk, and rdisk.
View 3 Replies
View Related
Oct 24, 2009
I accidentally deleted a partition and later found out that my system is dead....The only way I recover out of that is I reinstall Windows and then install grub again to recover the Linux partition. But I feel the delete partition is a very rapid process just taking seconds and in that I don't think files would be deleted, so I feel potentially I can recover the deleted partitions including the boot partition. But I don't know how to do it. Also now when the boot partition is deleted and the system is not booting up what should be done to recover the system and data?
View 5 Replies
View Related
Mar 8, 2006
I have a dual boot system (2 hard drives) booting Suse and XP and boot up through Suse's built in boot manager which gives me the option of booting to Windows or Linux. But since I barely ever use Linux I want to delete it off the 2nd drive so I can use it for a storage drive, so I'm wondering how to replace the Windows Master Boot Record so I can just boot into my XP drive. I'm scared that once I delete/reformat the contents of the 2nd hard drive (I'll probably use Partition Magic to do this through my XP drive) that I won't be able to boot XP up anymore. So before I do anything I want to just be able to boot into XP and bypass the linux drive before I delete it to make sure everything is ok.
View 2 Replies
View Related
Jan 1, 2008
I have a new laptop that came with Windows Vista. I have been trying to load it with Windows XP because Windows Vista didnt work. I am pretty sure a format and clean install will wreck my warranty, hence the dual boot. So far, I have been able to partition and install XP SP-2 to a partition. I've booted into XP fine but my Vista partition is not available. I think that the partition table or MBR has been corrupted.
So to repair this, what I did was boot up from the Vista recovery DVD and run the 'startup repair' option to reload the bootloader for Vista and thus, enable dual booting. When I rebooted I got a black screen saying 'Invalid Partition Table' or something to this effect. I tried repairing the MBR and so on and so forth from the console on the recovery DVD but this proved to be pretty much totally fruitless. So I went through and did an install of Windows XP once again, to my other drive partition I had created. So I am basically where I started.
View 1 Replies
View Related
Sep 6, 2006
I just upgraded my system a couple days ago and have been having several issues. First, Vista wouldn't recognize my onboard sound and LAN from a fresh install No available drivers, go figure. So, I had to install two copies of Win XP SP2, and then upgrade one of them to Vista. A pain, but the only way I could get everything to work properly.
I got everything where I wanted it, life is good. Then I'm booting into Win XP and I have two identically named Win XP OS's in the bootup screen. So as not to confuse my wife, I went into the Startup and Recovery options menu (Again this is in XP) and deleted, what I thought, was the XP I used as an upgrade to Vista. Turns out I got the wrong one. Now I can't boot to XP, but Vista is working fine. Basically, when I choose "Earlier Versions of Windows" I get HD activity for a moment, but then everything seems to halt. No responce from the keyboard, so I have to do a Hard Re-Boot.
View 3 Replies
View Related
Nov 5, 2006
I have a dual boot environment with two Win XP installed on different disks, XP1 and XP2 . XP1 was installed first and contains the boot files (NTLDR, boot.ini...) and XP2 came second. Now, I would like to keep XP2 and get rid of XP1. How can i delete XP1 since it contains the boot files? if i delete XP1 i am afraid to not be able to boot on XP2.
View 14 Replies
View Related
Sep 7, 2009
I have had this weird problem that seems random (i know computers arent really random but I cant figure out the cause). I have Win7 and WinXp in a dual boot working fine then after like a week of everything being fine my XP will not boot. I get to the Boot Manager and select XP and the screen just goes black and the system reboots back to the Boot Manager. I am having trouble finding the exact problem because I dont know win booting very well. I am assuming the MBR is fine because it gets to the Boot Manager fine. So I figure it is something with the WinXP partition. Win7 boots perfect. I have tried resetting up the boot with Easy BCD 2.0 beta (way better than 1.x) with no success.
This is not the first time this has happened, I end up having to either install XP fresh or do a repair install. I made a Acronis True Image backup and when everything was working then restored it with no success. I am getting really sick of this happening though because this is like the 6th time this has happened. The XP install is only used to game so it is bare minimum programs. I would appreciate any help in finding the route of the problem so that I can fix it instead of reinstalling the OS.
View 1 Replies
View Related
Dec 9, 2005
I have a system which was initially set up a while ago as a dual boot, Win98SE/Win2K. I had a need for the Win98SE side of things then, but now that has gone but the Win98SE partition is the boot of course.I want to be able to do away with the Win98SE partition completely and ideally add the space to the Win2K one, maybe leave it as a clean NTFS partition if that makes things easier. This would mean that I would end up with a drive with a single boot partition holding Win2K. This of course is not a trivial process as the drive letter of the boot partition will need to change. (I do want that drive letter change incidentally).
View 2 Replies
View Related
Dec 9, 2005
I had a Win 98 SE PC on a 20 GB drive (FAT32), and then I decided to ad an 80 GB and install Win XP. Since I wanted to maintain some Win 98 function compatibility, I opted for dual-boot, formatting my 80GB HD to NTFS and installing all of the Win XP OS into that drive. The Win 98 runs fine and is limited to the 20GB FAT32 HD, while the Win XP can see both drives but its files and programs are contained in the 80GB NTFS HD.
Now that I have deemed the Win 98 OS no longer necessary for this machine - I am trying to figure out how to make my machine boot from the XP HD (I plan to format the 20GB disk and use it for back-up storage
View 6 Replies
View Related
Apr 3, 2007
I have successfully cloned my primary c partition of a dual boot system with XP Pro on the 1st primary partition c: and XP Pro on the 2nd primary partition as d: I can boot into my XP on the c: drive with no problem, but when I attempt to boot into my XP on the D drive it hangs on the blue screen right before booting into the user profiles. And believe it or not it continuously loops making the windows startup sound and the shutdown sound. It does the same in safe mode. I will try to explain the process on what I did so it can help you experts figure out this dilemma that I'm having. My old drive an IDE 100GB IBM primary drive was partitioned into 3 parts:
c: 30GB FAT32 primary
d: 30GB FAT32 "
e: 30gb FAT32 "
All ran great in XP's on c: ,D: and :e except that i was running out of room in all the partitions and the drive is getting very old , I think (5yrs). I used XXClone Pro v.0.58.0 to clone my old c: and d: partitions to a WD IDE 160GB. I tried many other cloning proggys like Acronis True Image, Drive Clone, Paragon Drive Copy, Drive Image 2002, HDClone 3.1 Pro but they all either changed my new drive NTFS file system to FAT32 or made exact same size copies. I formatted and partitioned my new drive as follows:..............
View 2 Replies
View Related
May 21, 2010
I have done some searching and it seems that other people who have had this problem, have been installing ubuntu. I havn't managed to come to a solution. I installed XP(1) onto drive 1 , then reorganised all of my partitions to be in the correct order with the correct labels (I have been having a nightmare with volumue labels being incorrect!). Anyways got all the partitions exactly how I want them using partition manager (i.e XP(1) on C: with the intention to install XP(2) on D. Rebooted machine, pressed a key to boot from CD, it says 'setup is inspecting your current configuration' and then the screen stays black (I have to reset the machine). I turned off the computer and dissconnected drive 2 (int.) and drive 3 (ext.). Problem still exists.
View 2 Replies
View Related
May 21, 2010
I installed XP(1) onto drive 1 , then reorganised all of my partitions to be in the correct order with the correct labels (I have been having a nightmare with volumue labels being incorrect!). Anyway got all the partitions exactly how I want them using partition manager (i.e XP(1) on C: with the intention to install XP(2) on D. Rebooted machine, pressed a key to boot from CD, it says 'setup is inspecting your current configuration' and then the screen stays black (I have to reset the machine). I turned off the computer and dissconnected drive 2 (int.) and drive 3 (ext.). Problem still exists. How do I boot to the blue setup screen for my second copy of XP?
View 4 Replies
View Related
