Dual Boot Into Single Boot - See Both Drives
Dec 9, 2005
I had a Win 98 SE PC on a 20 GB drive (FAT32), and then I decided to ad an 80 GB and install Win XP. Since I wanted to maintain some Win 98 function compatibility, I opted for dual-boot, formatting my 80GB HD to NTFS and installing all of the Win XP OS into that drive. The Win 98 runs fine and is limited to the 20GB FAT32 HD, while the Win XP can see both drives but its files and programs are contained in the 80GB NTFS HD.
Now that I have deemed the Win 98 OS no longer necessary for this machine - I am trying to figure out how to make my machine boot from the XP HD (I plan to format the 20GB disk and use it for back-up storage
View 6 Replies
ADVERTISEMENT
Jul 26, 2005
Can anybody point me to the instructions about how to install XP Pro to a single Win98 hard drive - to make it dual boot, like Win 2k? I've been looking all around the internet and the only thing I've found is an XP dual boot on a 2nd hard drive.
View 14 Replies
View Related
Jul 23, 2005
I have Win XP home installed as OEM software on the C drive of my PC.
I also have this OS as a Norton Ghost file supplied with the PC as a
"Recovery CD".
I have installed a second hard drive designated "D"
This all works fine.
I wish to install Win 2000 (which I have on a Microsoft cd) on the second HD.
I would then hope at boot - up to be given the choice of which OS to load.
Can anyone tell me what is the simplest way to do this?
View 3 Replies
View Related
Oct 23, 2006
I have two hard drives and I want to use both for windows xp pro. when i boot up windows how do I switch from one to the other?
View 14 Replies
View Related
Jul 23, 2003
Is it possible to dual boot between to different hard drives both running Windows XP? I just bought a new hard drive and I want to install it on the same machine and have a drive just for me and my wife and the kids can have their own. They down load so much stuff and cause the system to boot and run so slow. I'm tired of restoring it just to find 2 weeks later it's like it was.
View 2 Replies
View Related
Feb 24, 2008
So I'm using my a8n-sli premium motherboard and have been just using 1 sata hard drive using Windows XP for about a year. I bought a second sata hard drive last week and installed Vista on it.I just can't figure out the correct boot.ini for this to work,I get an missing NTLD message, when I try to boot from Vista, but the XP one works with that configuration.I can boot off the Vista one fine if I set it in the bios boot order to come up before the XP hard drive, so the drive and the OS are fine
View 3 Replies
View Related
Jun 24, 2005
I Installed a 2nd HD and cloned my first HD to it as a backup and would like to be able to dual boot. This is XP Pro. I would like to know what numbers to use in multi, disk, and rdisk.
View 3 Replies
View Related
Oct 24, 2009
I accidentally deleted a partition and later found out that my system is dead....The only way I recover out of that is I reinstall Windows and then install grub again to recover the Linux partition. But I feel the delete partition is a very rapid process just taking seconds and in that I don't think files would be deleted, so I feel potentially I can recover the deleted partitions including the boot partition. But I don't know how to do it. Also now when the boot partition is deleted and the system is not booting up what should be done to recover the system and data?
View 5 Replies
View Related
Mar 8, 2006
I have a dual boot system (2 hard drives) booting Suse and XP and boot up through Suse's built in boot manager which gives me the option of booting to Windows or Linux. But since I barely ever use Linux I want to delete it off the 2nd drive so I can use it for a storage drive, so I'm wondering how to replace the Windows Master Boot Record so I can just boot into my XP drive. I'm scared that once I delete/reformat the contents of the 2nd hard drive (I'll probably use Partition Magic to do this through my XP drive) that I won't be able to boot XP up anymore. So before I do anything I want to just be able to boot into XP and bypass the linux drive before I delete it to make sure everything is ok.
View 2 Replies
View Related
Jan 1, 2008
I have a new laptop that came with Windows Vista. I have been trying to load it with Windows XP because Windows Vista didnt work. I am pretty sure a format and clean install will wreck my warranty, hence the dual boot. So far, I have been able to partition and install XP SP-2 to a partition. I've booted into XP fine but my Vista partition is not available. I think that the partition table or MBR has been corrupted.
So to repair this, what I did was boot up from the Vista recovery DVD and run the 'startup repair' option to reload the bootloader for Vista and thus, enable dual booting. When I rebooted I got a black screen saying 'Invalid Partition Table' or something to this effect. I tried repairing the MBR and so on and so forth from the console on the recovery DVD but this proved to be pretty much totally fruitless. So I went through and did an install of Windows XP once again, to my other drive partition I had created. So I am basically where I started.
View 1 Replies
View Related
Sep 6, 2006
I just upgraded my system a couple days ago and have been having several issues. First, Vista wouldn't recognize my onboard sound and LAN from a fresh install No available drivers, go figure. So, I had to install two copies of Win XP SP2, and then upgrade one of them to Vista. A pain, but the only way I could get everything to work properly.
I got everything where I wanted it, life is good. Then I'm booting into Win XP and I have two identically named Win XP OS's in the bootup screen. So as not to confuse my wife, I went into the Startup and Recovery options menu (Again this is in XP) and deleted, what I thought, was the XP I used as an upgrade to Vista. Turns out I got the wrong one. Now I can't boot to XP, but Vista is working fine. Basically, when I choose "Earlier Versions of Windows" I get HD activity for a moment, but then everything seems to halt. No responce from the keyboard, so I have to do a Hard Re-Boot.
View 3 Replies
View Related
Nov 5, 2006
I have a dual boot environment with two Win XP installed on different disks, XP1 and XP2 . XP1 was installed first and contains the boot files (NTLDR, boot.ini...) and XP2 came second. Now, I would like to keep XP2 and get rid of XP1. How can i delete XP1 since it contains the boot files? if i delete XP1 i am afraid to not be able to boot on XP2.
View 14 Replies
View Related
Sep 7, 2009
I have had this weird problem that seems random (i know computers arent really random but I cant figure out the cause). I have Win7 and WinXp in a dual boot working fine then after like a week of everything being fine my XP will not boot. I get to the Boot Manager and select XP and the screen just goes black and the system reboots back to the Boot Manager. I am having trouble finding the exact problem because I dont know win booting very well. I am assuming the MBR is fine because it gets to the Boot Manager fine. So I figure it is something with the WinXP partition. Win7 boots perfect. I have tried resetting up the boot with Easy BCD 2.0 beta (way better than 1.x) with no success.
This is not the first time this has happened, I end up having to either install XP fresh or do a repair install. I made a Acronis True Image backup and when everything was working then restored it with no success. I am getting really sick of this happening though because this is like the 6th time this has happened. The XP install is only used to game so it is bare minimum programs. I would appreciate any help in finding the route of the problem so that I can fix it instead of reinstalling the OS.
View 1 Replies
View Related
Dec 9, 2005
I have a system which was initially set up a while ago as a dual boot, Win98SE/Win2K. I had a need for the Win98SE side of things then, but now that has gone but the Win98SE partition is the boot of course.I want to be able to do away with the Win98SE partition completely and ideally add the space to the Win2K one, maybe leave it as a clean NTFS partition if that makes things easier. This would mean that I would end up with a drive with a single boot partition holding Win2K. This of course is not a trivial process as the drive letter of the boot partition will need to change. (I do want that drive letter change incidentally).
View 2 Replies
View Related
Apr 3, 2007
I have successfully cloned my primary c partition of a dual boot system with XP Pro on the 1st primary partition c: and XP Pro on the 2nd primary partition as d: I can boot into my XP on the c: drive with no problem, but when I attempt to boot into my XP on the D drive it hangs on the blue screen right before booting into the user profiles. And believe it or not it continuously loops making the windows startup sound and the shutdown sound. It does the same in safe mode. I will try to explain the process on what I did so it can help you experts figure out this dilemma that I'm having. My old drive an IDE 100GB IBM primary drive was partitioned into 3 parts:
c: 30GB FAT32 primary
d: 30GB FAT32 "
e: 30gb FAT32 "
All ran great in XP's on c: ,D: and :e except that i was running out of room in all the partitions and the drive is getting very old , I think (5yrs). I used XXClone Pro v.0.58.0 to clone my old c: and d: partitions to a WD IDE 160GB. I tried many other cloning proggys like Acronis True Image, Drive Clone, Paragon Drive Copy, Drive Image 2002, HDClone 3.1 Pro but they all either changed my new drive NTFS file system to FAT32 or made exact same size copies. I formatted and partitioned my new drive as follows:..............
View 2 Replies
View Related
May 21, 2010
I have done some searching and it seems that other people who have had this problem, have been installing ubuntu. I havn't managed to come to a solution. I installed XP(1) onto drive 1 , then reorganised all of my partitions to be in the correct order with the correct labels (I have been having a nightmare with volumue labels being incorrect!). Anyways got all the partitions exactly how I want them using partition manager (i.e XP(1) on C: with the intention to install XP(2) on D. Rebooted machine, pressed a key to boot from CD, it says 'setup is inspecting your current configuration' and then the screen stays black (I have to reset the machine). I turned off the computer and dissconnected drive 2 (int.) and drive 3 (ext.). Problem still exists.
View 2 Replies
View Related
May 21, 2010
I installed XP(1) onto drive 1 , then reorganised all of my partitions to be in the correct order with the correct labels (I have been having a nightmare with volumue labels being incorrect!). Anyway got all the partitions exactly how I want them using partition manager (i.e XP(1) on C: with the intention to install XP(2) on D. Rebooted machine, pressed a key to boot from CD, it says 'setup is inspecting your current configuration' and then the screen stays black (I have to reset the machine). I turned off the computer and dissconnected drive 2 (int.) and drive 3 (ext.). Problem still exists. How do I boot to the blue setup screen for my second copy of XP?
View 4 Replies
View Related
Jun 28, 2010
I have been trying to install Windows XP as a second OS as I already have Windows 7 Ultimate installed. Unfortunately, after I select a partition, format it, and reboot the system stalls on the screen after the BIOS that has something to do with a list of devices and such. After 10 or so seconds a few characters and letters go blank randomly on the page. I rebooted and selected my cd drive as the boot device and accidentally didn't press a button in time to boot and a bunch of highlighted numbers were thrown all over the screen and a random smiley face on one of the lines.
View 12 Replies
View Related
Jan 12, 2009
I'm trying to dual boot 2 different installs of xp pro from 2 drives using the Windows boot loader. I've edited the boot.ini every possible way I can think of, but nothing works. I've done this plenty of times using a linux boot loader or dual booting from a single drive but I cant figure this out. I haven't been able to find any reference to this subject anywhere, but I think it would work. Anybody have a clue as to how to do this? I know I can use a different boot manager to accomplish this, I just wanted to make the Win boot.ini work. Or, does anybody know of a good boot manager if I cant make this work?
View 9 Replies
View Related
Aug 29, 2009
I have dual booting on my PC with Vista home premium on a 500 Gb SATA disk and XP Pro on a 250Gb SATA, both internal. Vista no longer holds terrors for me and I'd like to get rid of XP and regain better use of the 250Gb HD. Can I just remove XP from the control panel in the XP boot or is it a lot more complicated?I don't really want to re format the XP drive as I'd have to transfer a lot of data and files
View 3 Replies
View Related
Apr 24, 2005
I need to add another boot instruction to boot.ini to start xp on the d drive on the second disk - partition 1. This is what I already have
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)WINDOWS
[operating systems]multi(0)disk(0)rdisk(0)partition(1)WINDOWS="microsoft Windows XP Professional"
View 3 Replies
View Related
Sep 7, 2006
I have a dual boot Win98, WinXP system. I reformated the win98 drive and started over. When I did this the computer only booted in to 98. So then I reloaded WinXP. Now it only boots into XP. Also, when I got into Control Panel>System>Advanced>Startup and Recovery, only one system is listed. It used to give me the choice. How do I fix this? Here is my old boot.ini file. I tried to find a new boot.ini file so I could rewrite it, but I couldn't.
[boot loader]
timeout=5
default=C:
[operating systems]
C:="Microsoft Windows"
multi(0)disk(0)rdisk(1)partition(1)WINDOWS="Microsoft Windows XP Professional" /fastdetect
View 4 Replies
View Related
Jul 7, 2005
If someone has one physical drive with Windows 98 on C:windows and Windows XP on D:windows, what should their boot.ini file have in it so that they can chose which one to boot with?
View 2 Replies
View Related
Sep 29, 2009
I'm running Windows XP and want to migrate to another hard drive. I used the excellent open source utility CloneZilla to clone my hard drive to the new drive, and used the equally excellent EASEUS Partition Master to resize the cloned partition to fill the new drive. Next I edited boot.ini on my original Windows to add the cloned drive as another boot option. After a bit of trial and error guessing the disk path for boot.ini I was able to dual boot into the original or the clone.
Now I want to boot off the new drive directly without dual booting off the original drive as I intend to wipe the old drive after I am satisfied that everything is working OK. But here's the catch: the original drive is SATA, while the new drive is IDE. So I can't simply swap the cables around and be done with it. So I configured the boot sequence in the bios to use "HDD-0" instead of "SCSI" (for some reason this old BIOS thinks SATA is SCSI) and restart. The system gets as far as detecting the boot source (floppy first, then CD-ROM) and then stops. No "operating system not found" or any other kind of error, just a blinking cursor and no activity.
I get exactly the same behavior using "HDD-1" to "HDD-3" as the boot drive in the bios. The bios detects the drive itself OK. I have also edited boot.ini on the new drive to point to the same location I used to add it to the dual boot menu on the original drive, but that didn't help. I also booted off the Windows installer, went into Recovery mode and ran Fixmbr and Fixboot with the original SATA drive unplugged and without specifying a device name.
View 7 Replies
View Related
Jul 3, 2009
I'm running a home built PC with multiple hard drives. Award bios. I'm not sure if what I want to do is possible but here goes: I installed Win XP SP2 on my spiffy new hard drive, installed all updates and drivers, as well as virus software and what not. I then imaged this drive using XML. Point being if anything goes bad or buggy I can just restore the image. I also want to be able to use this image as source for a dual boot machine, giving me an OS that I mess up without harming my main install. I have currently restored the image to another hard drive, but cannot get it to run. I've messed with the boot.ini's, and only get errors. What am I missing here? Are there other steps I need to take to get this to work, or am stuck reinstalling windows for dual boot to take effect.
View 2 Replies
View Related
Feb 1, 2008
I am running Windows XP and would really like to share the hard drive with another OS "Linux" and dual boot.
View 1 Replies
View Related
Aug 26, 2007
When switching between dual and single monitors, how do you save the positioning of the monitors so I do not have to reorient the two monitors under display properties settings?
View 2 Replies
View Related
Jun 30, 2005
My work PC has 2 monitors, and my home PC has 1. When I connect to my work PC, I see only the primary monitor, which is what I want. I have a problem with a certain application though, it opens properly in the primary monitor, but has a dialog box that seems to be opening in the secondary monitor (I can't see it, but I am able "guess" my way around it with the keyboard). Is there any way to force everything onto the primary monitor?
View 6 Replies
View Related
Dec 19, 2007
Due to a corrupt system file I did a repair using Recovery console. PC came back up with a few problems. Uninstalled most applications and Service Pack 2 and reinstalled. I have now noticed that my Athlon XP2 dual core processor is only running as one processor. In device manager it shows both processors and when the PC boots up it recognises that its a dual core processor. Yet when I run the Athlon utility that reports back processor information it only shows the one processor. Tried uninstalling the processors through device manager but nothing happens.Does anybody have any ideas how to fix this before I do a reinstall of windows?
View 2 Replies
View Related
Oct 23, 2009
problem is single-screen games. When launching a game, I would want for the 2nd monitor to stay on desktop and not get "included" in the game. Included as in going into standby / power saving mode.Can this be bypassed? I understand it must be quite impossible to use the mouse on the 2nd monitor while in-game on the 1st monitor, but I would at least want to see the desktop and the real-time programs that are running there (virus scanners, time, IRC etc.).
When I exit the game, or alt-tab, the 2nd monitor automatically returns from power save and all is normal.
Some specs if needed:
GF 8800GT 512
Core2Duo E6600
LG Flatron L1953TR as 1st monitor
LG Flatron L1952TQ as 2nd
WIN XP Pro SP3
View 3 Replies
View Related
May 8, 2008
Right now I am running an AMD 6000+ processor on Vista 64 with 4 GB 6400 Ram and EVGA 8800 GT GPU. Runs real nice and games (including Crysis) run smooth. My rig is set up with 2 hard drives. Drive #1 has my Vista 64 OS and Applications. Drive #2 has all my games installed.
1. Now that XP SP3 is out, should I set up a dual boot for gaming?
2. Since my games are all on Drive #2, should I install XP Professional there or on Drive #1 where my Vista is?
3. Will the applications/games I installed under Vista work under XP or would I need to re-install them? The latest benchmarks I have seen for gaming Vista vs XP shows almost no benefit to XP anymore with the latest drivers. Will SP3 imporve XP enough to make it worth it?
View 3 Replies
View Related
