I have a dual boot environment with two Win XP installed on different disks, XP1 and XP2 . XP1 was installed first and contains the boot files (NTLDR, boot.ini...) and XP2 came second. Now, I would like to keep XP2 and get rid of XP1. How can i delete XP1 since it contains the boot files? if i delete XP1 i am afraid to not be able to boot on XP2.
View 14 RepliesI have a system which was initially set up a while ago as a dual boot, Win98SE/Win2K. I had a need for the Win98SE side of things then, but now that has gone but the Win98SE partition is the boot of course.I want to be able to do away with the Win98SE partition completely and ideally add the space to the Win2K one, maybe leave it as a clean NTFS partition if that makes things easier. This would mean that I would end up with a drive with a single boot partition holding Win2K. This of course is not a trivial process as the drive letter of the boot partition will need to change. (I do want that drive letter change incidentally).
View 2 Replies View RelatedI accidentally deleted a partition and later found out that my system is dead....The only way I recover out of that is I reinstall Windows and then install grub again to recover the Linux partition. But I feel the delete partition is a very rapid process just taking seconds and in that I don't think files would be deleted, so I feel potentially I can recover the deleted partitions including the boot partition. But I don't know how to do it. Also now when the boot partition is deleted and the system is not booting up what should be done to recover the system and data?
View 5 Replies View RelatedI have dual booting on my PC with Vista home premium on a 500 Gb SATA disk and XP Pro on a 250Gb SATA, both internal. Vista no longer holds terrors for me and I'd like to get rid of XP and regain better use of the 250Gb HD. Can I just remove XP from the control panel in the XP boot or is it a lot more complicated?I don't really want to re format the XP drive as I'd have to transfer a lot of data and files
View 3 Replies View RelatedA couple days ago, I was running Vista and XP on two seperate hard drives on my desktop. I have since deicded to use the Vista hard drive for data storage and have removed it from my desktop.However,whenever I boot up my desktop, my computer still goes to the black windows uploader screen and askes me to choose and "Earlier version of windows" (the XP) or my non-existant Vista.
View 2 Replies View RelatedI recently purchased a notebook with XP Home SP@ proinstalled. I upgraded to XP Pro but had to do a complete intall rather than an upgrade because my xp pro update cd was older than xp home sp2. I now have a windows (xp home) and a windowsp (xp pro) folder.
View 1 Replies View RelatedI really didnt want to harm my computer or have all my files deleted so after spending hours googling it, I thought I'd make my own thread and ask here.My cousin basically gave me my laptop, 40gb hard drive and dual booting windows xp and windows vista.I've never ever used xp and always use vista, but recently I noticed that I'm running out of diskspace. After a lot of research I realised it was my windows folder that was taking up 50% of my drive!
View 3 Replies View RelatedI have a dual boot system setup. One each on it's own partition. I would like to delete 1 so it will free up the hard drive space for the other. How do I go about doing this. One OS is server 2000 and the other is server 2003.
View 14 Replies View Relatedi want to install windows 7 on my computer currently running xp. i have 3 partitions, c, d, and e. xp is on c, and i want windows 7 on partition e. i also want all my xp data to go on windows 7, as if it was an upgrade install. is there a way to do this?
View 8 Replies View RelatedI wanted to reinstall Xp Home Edition on my Sony Vaio because I felt that I wanted to start fresh again. I lost my cd so I went on another forum and they told me to run the program called winnt32.exe in the folder C:windowssystem32I386. I did that and I reinstalled xp. After it restarted, It asked me which system I wanted to boot: Windows Xp Home Edition or Windows XP Home edition. I clicked on the new one (which I presumed to be the top one) and found that I could not log in. It just took me to the desktop and there was nothing on it.I also found that I could not use the standby feature. It is pretty much like safe mode except for the fact that I can go on the internet. Now I am faced with two problems.1. How do i get rid of that new dual boot partition 2.How do I reinstall XP on my old partition?
View 1 Replies View RelatedI'm wiping my laptop HD and starting fresh. I want to install DOS and XP, and I've gotten a lot of tips through searching old posts, but I still have a few questions. There wasn't much out there for this particular combination.First, equipment. I've got a Toshiba Satellite M55 with a 75 GB HD. I'm installing HP Home. I have no floppy drive. I'm also using a 250 GB USB external hard drive for backups and such. Partitions: What size for each? I was thinking I'd have one for DOS, one for XP and applications, and one for data, although I'm planning to store most of my non-essential data on the external. Is it beneficial to also have a separate partition for the swap file? I read a recommendation in another thread for a 30 GB volume for XP/apps and a 2 GB volume for the swap file with the rest allocated for data, but I didn't find any recommendations for MS-DOS volume size.
View 6 Replies View RelatedI have a dual boot system (2 hard drives) booting Suse and XP and boot up through Suse's built in boot manager which gives me the option of booting to Windows or Linux. But since I barely ever use Linux I want to delete it off the 2nd drive so I can use it for a storage drive, so I'm wondering how to replace the Windows Master Boot Record so I can just boot into my XP drive. I'm scared that once I delete/reformat the contents of the 2nd hard drive (I'll probably use Partition Magic to do this through my XP drive) that I won't be able to boot XP up anymore. So before I do anything I want to just be able to boot into XP and bypass the linux drive before I delete it to make sure everything is ok.
View 2 Replies View RelatedI used Win98SE before installing WinXP Pro about a year ago. I have 2 internal hard drives and am running a dual boot with 98SE on the C drive and the K drive has the XP Pro. C drive was partitioned at the outset of dual booting and has drives E through H. Drive K which has XP Pro is beginning to fill and in fact, I currently have only 4 gigs available for use. Now the question: can I move some of the unused gigs in drives G and H to the K drive?? Oh, 98SE is FAT32 and Pro has NTFS formatting. If the answer is yes then, of course, I will need to know how. And as usual, TIA.
View 11 Replies View Relatedi was trying to restore my backup of the partition with the windows xp system on it. Of course, everything went wrong and Norton Ghost 2003 had an error at about 95%. I thought i can just boot from the win xp cd and fix the problem... no way when i try to boot from the win xp cd, i get a black screen after checking my pc configuration, no driver loading etc.
when i try to boot from my sata drive, it says that there are some missing files (that's not strange, if ghost didnt work like it should) when i try to boot from any other drive i get an error like this: A problem has been detected and Windows has been shut down to prevent damage to your Computer. If this is the first time you've seen this Stop error screen, restart your computer.If this screen appears again, follow thease steps: Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run chkdisk/f to check for hard drive corruption, and then restart your computer. Technical information: STOP: 0x0000007B(0xF8958640, 0xC0000034, 0x00000000,0x00000000)
I have a dual boot Win98, WinXP system. I reformated the win98 drive and started over. When I did this the computer only booted in to 98. So then I reloaded WinXP. Now it only boots into XP. Also, when I got into Control Panel>System>Advanced>Startup and Recovery, only one system is listed. It used to give me the choice. How do I fix this? Here is my old boot.ini file. I tried to find a new boot.ini file so I could rewrite it, but I couldn't.
[boot loader]
timeout=5
default=C:
[operating systems]
C:="Microsoft Windows"
multi(0)disk(0)rdisk(1)partition(1)WINDOWS="Microsoft Windows XP Professional" /fastdetect
If someone has one physical drive with Windows 98 on C:windows and Windows XP on D:windows, what should their boot.ini file have in it so that they can chose which one to boot with?
View 2 Replies View RelatedCan i put Vista on a computer as a second operating system and dual boot with XP? Is there a risk of Vista interfering with the XP partition
View 2 Replies View RelatedI initially started with XP and created a separate partition for Vista, installing Vista on the other partition, Vista sees the (XP) Earlier version of windows. When I choose XP, I get the following error: NTOSKRNL.EXE is missing or corrupt. If I repair the XP with fixmbr - I end up screwing up Vista. Then when I repair Vista, it end's screwing up XP
View 3 Replies View RelatedWhen I boot WinXP it goes to the screen that asks you to select which use to log in as. I am the only user on my PC. Is there a way to get rid of that so Windows will just boot up automatically?
View 1 Replies View RelatedSo when I boot my PC, I am asked to choose between booting up XP Home and XP Pro. The OS I want is XP Pro, and when I choose it, everything works perfectly. I would just like to know how to remove the XP Home option from the startup prompt.
View 6 Replies View RelatedI want create a dual boot system my Windows XP pro PC. I can create partitions okay (using Partition Manager 8.5 se) but I don't know how to set up, or edit, the Master Boot Record or whatever else is involved.I shall want to make a clean install of another XP OS.If there is some (preferably free) software that assists with this that'd be good.I have a spare PC on which I can make my mistakes too!
View 7 Replies View RelatedDual booting various windows operating systems for over 15 years. I currently dual boot Xp Pro and Vista Ultimate from a single 250 gig SATA drive. both systems have over 170 installed programs.
View 8 Replies View RelatedHow do I establish a dual boot system? I am running WinXP on both drives.
View 12 Replies View RelatedI Installed a 2nd HD and cloned my first HD to it as a backup and would like to be able to dual boot. This is XP Pro. I would like to know what numbers to use in multi, disk, and rdisk.
View 3 Replies View RelatedI currently have XP on the first partition, and I later added Vista on another partition as a dual boot.For various reasons, I need to reinstall XP. That involves formatting the first partition and installing a clean XP.It just occurred to me that doing that might mess up the dual boot functionality.Should I be concerned, and if so, what can I do to avoid the problem?
View 4 Replies View RelatedCan a dual boot system be created with two versions of XP pro or does one have to be a different OS than XP.
View 14 Replies View RelatedI have a new laptop that came with Windows Vista. I have been trying to load it with Windows XP because Windows Vista didnt work. I am pretty sure a format and clean install will wreck my warranty, hence the dual boot. So far, I have been able to partition and install XP SP-2 to a partition. I've booted into XP fine but my Vista partition is not available. I think that the partition table or MBR has been corrupted.
So to repair this, what I did was boot up from the Vista recovery DVD and run the 'startup repair' option to reload the bootloader for Vista and thus, enable dual booting. When I rebooted I got a black screen saying 'Invalid Partition Table' or something to this effect. I tried repairing the MBR and so on and so forth from the console on the recovery DVD but this proved to be pretty much totally fruitless. So I went through and did an install of Windows XP once again, to my other drive partition I had created. So I am basically where I started.
I just upgraded my system a couple days ago and have been having several issues. First, Vista wouldn't recognize my onboard sound and LAN from a fresh install No available drivers, go figure. So, I had to install two copies of Win XP SP2, and then upgrade one of them to Vista. A pain, but the only way I could get everything to work properly.
I got everything where I wanted it, life is good. Then I'm booting into Win XP and I have two identically named Win XP OS's in the bootup screen. So as not to confuse my wife, I went into the Startup and Recovery options menu (Again this is in XP) and deleted, what I thought, was the XP I used as an upgrade to Vista. Turns out I got the wrong one. Now I can't boot to XP, but Vista is working fine. Basically, when I choose "Earlier Versions of Windows" I get HD activity for a moment, but then everything seems to halt. No responce from the keyboard, so I have to do a Hard Re-Boot.
I have had this weird problem that seems random (i know computers arent really random but I cant figure out the cause). I have Win7 and WinXp in a dual boot working fine then after like a week of everything being fine my XP will not boot. I get to the Boot Manager and select XP and the screen just goes black and the system reboots back to the Boot Manager. I am having trouble finding the exact problem because I dont know win booting very well. I am assuming the MBR is fine because it gets to the Boot Manager fine. So I figure it is something with the WinXP partition. Win7 boots perfect. I have tried resetting up the boot with Easy BCD 2.0 beta (way better than 1.x) with no success.
This is not the first time this has happened, I end up having to either install XP fresh or do a repair install. I made a Acronis True Image backup and when everything was working then restored it with no success. I am getting really sick of this happening though because this is like the 6th time this has happened. The XP install is only used to game so it is bare minimum programs. I would appreciate any help in finding the route of the problem so that I can fix it instead of reinstalling the OS.
I cloned a hard drive which had Windows XP on it (the hard drive was going
out) and the new hard drive would not boot unless I booted first to a floippy with boot.ini, ntldr, and ntdetect.com. Have tried recovery console and everything else I can think of, but the system WILL NOT boot to the hard drive. I checked the boot.ini file for improper boot, but everything looks The old hard drive had two partitions on it, but the hidden partition was corrupt so I deleted it. I changed the boot.ini file settings accordingly.
I have Linux and Windows XP sp2 home Have tried searching the forum without any results Tried f8 when script for grub appears but have been unsuccessful