Restore Backup Partition - No System Boot No Cd Boot WTF
Feb 17, 2007
i was trying to restore my backup of the partition with the windows xp system on it. Of course, everything went wrong and Norton Ghost 2003 had an error at about 95%. I thought i can just boot from the win xp cd and fix the problem... no way when i try to boot from the win xp cd, i get a black screen after checking my pc configuration, no driver loading etc.
when i try to boot from my sata drive, it says that there are some missing files (that's not strange, if ghost didnt work like it should) when i try to boot from any other drive i get an error like this: A problem has been detected and Windows has been shut down to prevent damage to your Computer. If this is the first time you've seen this Stop error screen, restart your computer.If this screen appears again, follow thease steps: Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run chkdisk/f to check for hard drive corruption, and then restart your computer. Technical information: STOP: 0x0000007B(0xF8958640, 0xC0000034, 0x00000000,0x00000000)
I accidentally deleted a partition and later found out that my system is dead....The only way I recover out of that is I reinstall Windows and then install grub again to recover the Linux partition. But I feel the delete partition is a very rapid process just taking seconds and in that I don't think files would be deleted, so I feel potentially I can recover the deleted partitions including the boot partition. But I don't know how to do it. Also now when the boot partition is deleted and the system is not booting up what should be done to recover the system and data?
I have a dual boot environment with two Win XP installed on different disks, XP1 and XP2 . XP1 was installed first and contains the boot files (NTLDR, boot.ini...) and XP2 came second. Now, I would like to keep XP2 and get rid of XP1. How can i delete XP1 since it contains the boot files? if i delete XP1 i am afraid to not be able to boot on XP2.
I installed XP-Home edition on a computer and did a file search for any file for Scan Registery and ScanDisk, but did not find any such file For Win 98/SE, the O/S at the start of computer, backs up the Registery - by defalut 5 back-ups, 1 for each day, but can be increased up to 99. If the Registery get's corrupted (or you want to remove all traces of a just installed and uninstalled program, you can shut down the unit, re-boot with F8 to Command Prompt and run: ScanReg (DOS Mode) and restore the 4 files: System.dat, User.dat, System.ini and User.ini Is there a similar functionality available in XP - Home Edition? Is there such file Win XP version?
I was messing around with CCleaner and deleted something to do with an old version of McAfee (which isn't even on my computer anymore) from the registry. Yes, it was stupid to mess with the registry I guess because I failed to make the backup and now my computer won't boot. I get the blue screen that says there was an error 0x0000008e, or something like that.
I have tried using F8 and choosing the last known good configuration but it doesn't work. Also, I can boot into safe mode and I tried running a system restore but after it finished and I rebooted, it said that I couldn't restore from that point.I haven't really tried another restore because I am a little afraid to do anything. I don't want to risk losing access in safe mode because I need to be able to back up some of my files if in case I have to do a reformat.
I cloned a hard drive which had Windows XP on it (the hard drive was going out) and the new hard drive would not boot unless I booted first to a floippy with boot.ini, ntldr, and ntdetect.com. Have tried recovery console and everything else I can think of, but the system WILL NOT boot to the hard drive. I checked the boot.ini file for improper boot, but everything looks The old hard drive had two partitions on it, but the hidden partition was corrupt so I deleted it. I changed the boot.ini file settings accordingly.
up to recently I had a Multi boot system, i have a 120gb HD it had 20gb for XP for my Famliy, 70gb for me, and 20 for backup. I Decided to make a pc for everyone else and once i copied there files with Partition Magic formated there partition which was C:, now i cant access my partition
all the data is intact I'm currently on a live distro of linux on my ipod.I was messing with the partitions ONLY ON MY IPOD on paragon partition manager.it prompted me to restart to finish and it seemed to lake a LONG timeit gave an error message saying if the part was bootable to redo LILOnow it won't boot windows and I HAVE NO IDEA HOW TO FIX IT!!!
I have a system which was initially set up a while ago as a dual boot, Win98SE/Win2K. I had a need for the Win98SE side of things then, but now that has gone but the Win98SE partition is the boot of course.I want to be able to do away with the Win98SE partition completely and ideally add the space to the Win2K one, maybe leave it as a clean NTFS partition if that makes things easier. This would mean that I would end up with a drive with a single boot partition holding Win2K. This of course is not a trivial process as the drive letter of the boot partition will need to change. (I do want that drive letter change incidentally).
My Dell Inspiron B130 Windows Xp SP3 had only one internal hard drive, it was broken up into Drive C and two nameless partions that I did not make I accidentley deleted one of the namless partitions and now my windows XP SP3 laptop is no longer bootable. My computer just says no bootable drive found. I think I deleated some important system data My personal data on Drive C appears to be still there is there any way I can recover the system data or make my laptop bootable again without losing all of my data?
I am looking a providing a windows xp disk based recovery solution which uses a boot manager to boot into a small footprint o/s ( DOS,Linux,Recovery Console ....haven't decided yet) do a 5 second sanity check on the window partition (windows partition is intact,system files are present.) if okay tell the bootmanager to boot to windows partion and restart if bad tell boot manager to boot to hidden recovery partition and restart. Does anyone know of any boot managers that let me chnage the boot partition on the fly like this?
I'm running XP SP3, Home version. I've tried F8 on boot, and that doesn't work. I've gone into msconfig, and curiously, there is no boot.ini tab. The closest thing it has is an option for "Diagnostic Startup." I'm assuming that's the same thing but want to take no chances. Is it the same thing? Any pitfalls to watch out for?
System restore. Here's the reason that I have to be so careful: I can't get system restore to work, regardless of the date I select. I'm wondering whether I can get system restore to work from safe mode (or is that the only way that it will work?). To be honest, I'm nervous about changing the msconfig to Diagnostic mode without system restore working, because I had a friend who changed his msconfig to Diagnostic and his pc wouldn't stop booting in that mode even when he changed msconfig back. Without system restore, he wouldn't have been able to undo the change in msconfig.
my pc (XP) will not boot or close up clean. The only way I can boot is using safe mode. Is there a better way to fix boot problems without doing a complete sys recovery? The instructions for complete sys recovery is pretty vague it seems to me.
I am running an HP Pavilion a1624n with Win XP Media Center 2005, running on a wireless network with one other desktop and one laptop. I also use Firefox browser and have NAV 2007. I have had this PC for about two months and the first time or two that I tried System Restore, it worked OK, Now, (with System Restore turned ON),it has gone downhill and when I try to run it, it goes through the process but at the end I get the error message "your computer cannot be restored to 00/00/00. No changes have been made." It does not make the automatic 24 hour restore points, even though it does make restore points when new programs are installed and manual restore points can be made. It works fine in Safe Mode using the rstrui.exe command. This latest problem started yesterday.
I have the Knoppix CD to boot into Linux, with full access to all my usual system devices, and files.Can System Restore be run from the Linux CD boot? I recognize that when "problems" do arise, that bootup using "last good configuration" will generally get the system to boot, and then of course, System Restore can be called upon to go back in time. But if "last good configuration" did have some problems booting up, it would be nice to be able to use the Knoppix CD.
i rescently had to format the drive for a fresh copy. I have installed xp home retail version and realised i wanted to try something diferent. At system start the computer starts up prior to the windows boot screen and displays COMPAQ in big bright bold letters with option of F10 for system restore which is no longer on system (reformated) as well as other options for boot select pres ESC and F1 for setup.Can i remove this from my system? and then can i create a menu with 2 options 1 load windows normaly and 2 install a disk image stored on a hidden partition? maybe like the F10 key assighn that to access the imge and install it.
how System Restore works in a multi-boot environment? (I am not concerned with Vista, but with WinXP only).If I have O/S A and B, and I perform a System Restore in O/S A, is there any possibility that O/S B will also get rolled back to the same date? In O/S A, should I allow System Restore to monitor the O/S B partition, or should I switch off System Restore on that drive?
I had a problem's in my PC because the viruses, I cleaned my PC with a lot of anti-virus and tools to fix that problem's I disable the system restore but the viruses back again.I tried to access to safe mode to clean the system but the PC restart after loading
My computer crashed about a month ago and I had to use a recovery disc to restore my original system.. Everything works fine except when I boot up and following the Sony logo and Intel logo the following message appears "Press F11 for Acronis Startup Recovery Manager. Acronis fatal error Boot drive (partition) not found. Press Enter to try to boot your PC." Pressing enter boots up the PC fine but how can I eliminate the process? I had Acronis on both drives before the crash but it no longer exists.
By default, Windows XP keeps a backup of system files in the System Volume Information folder. This can eat up valuable space on your hard drive. If you don't want Windows to back up your system files:1. Open the Control Panel2. Double-click on system3. Click the System Restore tab4. Check "Turn off System Restore on all drives"5. Hit Apply6. You may now delete the System Volume Information folder.Warning! If you turn this off you will not be able to use Windows System Restore to restore your system in case of failure.
I hate to beat a dead horse, but thanks to the many previous posts concerning my System Restore problems I did the scans, and tried all recommendations and got it working fine (I thought). But now, I find that every time I re-boot, or shut down at night and start up in the mornings, all of my restore points are lost and a new one is established at the time of my boot up.I have tried to right click on the file C:Windowsinfsr, and select install, but I am prompted for the XP Pro CD (I use XP Windows Media Edition 2005). I have an HP a1624 with a Recovery Partition and no CD, but I am working to get one from HP. Also, in the inf directory, there is also a sr.PNF (Precompiled Setup Information).
If you do a full backup with backup that comes with windows xp will it just backup files. what i mean is if you have an xp box.fully installed with software and full back it up. and it crashes.then you restore the full backup...will the system be the same as what it was all programs installed.
I tried to use MS backup tool to make a full backup of my whole system in order to restore it in another new machine. It fails because MS backup could not make a full backup, since the administrator does not have access to any file in the system (some directories, files, etc. are not allowed to be read by the admin). Meanwhile, ghost and partition magic for instance allows to copy the whole HD partition.Does anybody know if MS backup can really make a full system backup (with different access rights, multiple users on the machine, etc.), and then to restore this system into a new machine (same model, same hardware profile).That is, is a system duplication la-ghost possible with MS backup ?Is MS backup allows only to copy and restore personal accessible files, I do not understand why such tool exist since any standard copy and compress method would make the same thing. The real backup is when the system can be restored.
I reinstalled my OS several months ago, and decided that I might want a dual boot in the future. I already had an old, smaller drive in the machine that's labeled the c: drive. Reading one time that for security purposes it's good to have your OS on a drive other than C:, I decided to not alter the drive lettering.
I then partitioned a new internal hard drive into several logical drives. I formatted the D: partition as a Dos fat32 partition and the rest as NFTS partitions. Somehow, I allowed the D: partition to be the primary partition, while the E: partition which contains the Win 2000 Pro OS Winnt directory is a logical drive.
When I just checked disk management, I noticed that not only is boot.ini on the D: Dos partition, but so is ntldr along with the following Dos setup files:
I have this problem with my pc and it keeps restarting after the windows loading screen so i want to format the hardrive the only problem is that there are important files on there and am wondering if i could make some of disc floopy or CD that i could boot to and move all my important files to my 2ndry hardrive installed in the machine
I think i did something really wrong... i had a registry backup on my desktop and i wanted to move it to another area on my computer. I clicked on it and it said : are you sure you want to add the information in C: blah blah registry backup.reg to the registry? I dont know what i was thinking but i clicked on yes. And now i have several problems.... too many to mention but here's a few: anything windows site or microsoft site related cant get in.
first i get the HP blue screen. I tried F1, but i dont see my hard drive in the boot menu. I followed some steps in Hp's web site- took the cpu apart and unplugged both hard drives from the motherboard, plugged them back in. when i restarted ,i got the HP screen and then windows started to load up. After a few seconds the HP screen came back up and then the black screen: sk boot failure, insert system disk and press enter. I also noticed that pressing F10 for system recovery does nothing.
I have a dual boot system (2 hard drives) booting Suse and XP and boot up through Suse's built in boot manager which gives me the option of booting to Windows or Linux. But since I barely ever use Linux I want to delete it off the 2nd drive so I can use it for a storage drive, so I'm wondering how to replace the Windows Master Boot Record so I can just boot into my XP drive. I'm scared that once I delete/reformat the contents of the 2nd hard drive (I'll probably use Partition Magic to do this through my XP drive) that I won't be able to boot XP up anymore. So before I do anything I want to just be able to boot into XP and bypass the linux drive before I delete it to make sure everything is ok.
I"m running WinXP SP2 Home. Hardware is 2.0 Celeron, 1 gig Ram, 64MB Nvidia Video Card, PS/2 keyboard and mouse, HD's are 250GIG Western Digital with 4 partitions and 27% free on the XP Boot and 200GIG Western Digital with 2 Partitions. I have a Lite-On DVD +-R/RW drive and a 3.5 floppy. I am setup with a Duel-Boot configuration Win 98/XP. I do not have a paging file.
My problem occures after I hit enter for the Select Operating System page. I Hit enter, Win XP proceeds to load. After I hit enter and Windows loads the blue welcome screen 1 minute has passed. I hear the Welcome Audio music, however blue welcome screen is still there for 30 more seconds. Next is my picture that I have as my background that is shown without icons for 1minute 21seconds. Windows now displays my icons on my desktop. the icons blink at minute 4. after 4 minutes and 51 seconds I am able to use my computer. At bootup I only have 43 programs running and 357MB of the 1 gig ram taken.
What I have done: 1) I have started in safe mode and defraged my PC, 0% frag on all partitions except a drive that isn't currently plugged in and it was 1% because it's my backup drive (not worried about that 1%) 2)Removing all connected Componets and rebooted, same problem. 3) I have tried using msconfig.exe and setting the startup selection as Normal- it's defaulted to Selective. Tried reducing my startup programs. ....
My main computer's installation of windows (XP Home Edition OEM SP2) is completely dead. Due to a driver problem (to do with having alcohol 120% and daemon tools installed) it resolutely refuses to boot up, even in safe mode. I've tried everything to fix it, including several repair installatios of windows and much rummaging around with the recovery console, but it's gone, I need to reinstall.
Windows is installed on it's own partition, so I don't mind terribly having to reinstall, but one thing I'm annoyed about is having to reinstall all my programs (that are on their own partition too) when I lose the registry.
