Get Rid Of Dual Boot And Reinstall Old Partition?
Jun 29, 2005
I wanted to reinstall Xp Home Edition on my Sony Vaio because I felt that I wanted to start fresh again. I lost my cd so I went on another forum and they told me to run the program called winnt32.exe in the folder C:windowssystem32I386. I did that and I reinstalled xp. After it restarted, It asked me which system I wanted to boot: Windows Xp Home Edition or Windows XP Home edition. I clicked on the new one (which I presumed to be the top one) and found that I could not log in. It just took me to the desktop and there was nothing on it.I also found that I could not use the standby feature. It is pretty much like safe mode except for the fact that I can go on the internet. Now I am faced with two problems.1. How do i get rid of that new dual boot partition 2.How do I reinstall XP on my old partition?
View 1 Replies
ADVERTISEMENT
Oct 24, 2009
I accidentally deleted a partition and later found out that my system is dead....The only way I recover out of that is I reinstall Windows and then install grub again to recover the Linux partition. But I feel the delete partition is a very rapid process just taking seconds and in that I don't think files would be deleted, so I feel potentially I can recover the deleted partitions including the boot partition. But I don't know how to do it. Also now when the boot partition is deleted and the system is not booting up what should be done to recover the system and data?
View 5 Replies
View Related
Nov 5, 2006
I have a dual boot environment with two Win XP installed on different disks, XP1 and XP2 . XP1 was installed first and contains the boot files (NTLDR, boot.ini...) and XP2 came second. Now, I would like to keep XP2 and get rid of XP1. How can i delete XP1 since it contains the boot files? if i delete XP1 i am afraid to not be able to boot on XP2.
View 14 Replies
View Related
Dec 9, 2005
I have a system which was initially set up a while ago as a dual boot, Win98SE/Win2K. I had a need for the Win98SE side of things then, but now that has gone but the Win98SE partition is the boot of course.I want to be able to do away with the Win98SE partition completely and ideally add the space to the Win2K one, maybe leave it as a clean NTFS partition if that makes things easier. This would mean that I would end up with a drive with a single boot partition holding Win2K. This of course is not a trivial process as the drive letter of the boot partition will need to change. (I do want that drive letter change incidentally).
View 2 Replies
View Related
Mar 3, 2010
i want to install windows 7 on my computer currently running xp. i have 3 partitions, c, d, and e. xp is on c, and i want windows 7 on partition e. i also want all my xp data to go on windows 7, as if it was an upgrade install. is there a way to do this?
View 8 Replies
View Related
Feb 20, 2008
All things were fine and I had XP pro and XP home installed and working on seperate drives. I have just reinstalled XP pro and now on booting, no option to choose either operating system appears. I have done some searching and have seen references to copying a boot file from the CD and placing it into the XP home operating system to fix this. The instructions were not that detailed and not directly related to having 2 XP installs. nearly all search results I have found related to Xp dual booting with Vista. I have been thinking of now copying ALL the files from the XP Home operating system into the new XP Pro and then reinstalling the XP Home system. Sigh. I cannot use the system repair/recovery option as I do not know the Admin password. where did I put that? Is there an easy fix to get the dual boot working again?
View 8 Replies
View Related
Jul 25, 2010
Last year I installed Ubuntu 9.04 on my Dell Dimension 5000 running Windows XP Pro, giving me a trouble-free dual boot system until recently. Recently though, I've had problems with Windows being excruciatingly slow, some crashes, unexplained error messages etc - probably partly due to a load of unnecessary and now unwanted programs I've installed along the way. I would now like to start afresh with a clean reinstall of Windows - but am worried about possible complications with my Ubuntu installation and some horror stories I've heard about messing with the Master Boot Record. I do not wish to remove Ubuntu, and have had no problems with it.
Can I simply format my C drive and just install Windows again? Or am I rushing in where angels fear to tread? I have my Win XP Pro disk. I've reinstalled Windows in the past, but that was before I had installed Ubuntu.
View 1 Replies
View Related
Feb 24, 2007
I'm wiping my laptop HD and starting fresh. I want to install DOS and XP, and I've gotten a lot of tips through searching old posts, but I still have a few questions. There wasn't much out there for this particular combination.First, equipment. I've got a Toshiba Satellite M55 with a 75 GB HD. I'm installing HP Home. I have no floppy drive. I'm also using a 250 GB USB external hard drive for backups and such. Partitions: What size for each? I was thinking I'd have one for DOS, one for XP and applications, and one for data, although I'm planning to store most of my non-essential data on the external. Is it beneficial to also have a separate partition for the swap file? I read a recommendation in another thread for a 30 GB volume for XP/apps and a 2 GB volume for the swap file with the rest allocated for data, but I didn't find any recommendations for MS-DOS volume size.
View 6 Replies
View Related
Mar 14, 2008
I used Win98SE before installing WinXP Pro about a year ago. I have 2 internal hard drives and am running a dual boot with 98SE on the C drive and the K drive has the XP Pro. C drive was partitioned at the outset of dual booting and has drives E through H. Drive K which has XP Pro is beginning to fill and in fact, I currently have only 4 gigs available for use. Now the question: can I move some of the unused gigs in drives G and H to the K drive?? Oh, 98SE is FAT32 and Pro has NTFS formatting. If the answer is yes then, of course, I will need to know how. And as usual, TIA.
View 11 Replies
View Related
Jul 7, 2010
Now I am having multiple new problems. I want to completely erase the hard drive and install a new version of XP Home, not Pro. At the beginning of the installation process, it gathers system info. Immediately it responds with "no valid system partition" and the only option is to exit from the process. How can I get past this to complete the installation?
View 14 Replies
View Related
Jun 8, 2006
Can i put Vista on a computer as a second operating system and dual boot with XP? Is there a risk of Vista interfering with the XP partition
View 2 Replies
View Related
Dec 13, 2007
I initially started with XP and created a separate partition for Vista, installing Vista on the other partition, Vista sees the (XP) Earlier version of windows. When I choose XP, I get the following error: NTOSKRNL.EXE is missing or corrupt. If I repair the XP with fixmbr - I end up screwing up Vista. Then when I repair Vista, it end's screwing up XP
View 3 Replies
View Related
Jun 28, 2010
I have been trying to install Windows XP as a second OS as I already have Windows 7 Ultimate installed. Unfortunately, after I select a partition, format it, and reboot the system stalls on the screen after the BIOS that has something to do with a list of devices and such. After 10 or so seconds a few characters and letters go blank randomly on the page. I rebooted and selected my cd drive as the boot device and accidentally didn't press a button in time to boot and a bunch of highlighted numbers were thrown all over the screen and a random smiley face on one of the lines.
View 12 Replies
View Related
Jan 12, 2009
I'm trying to dual boot 2 different installs of xp pro from 2 drives using the Windows boot loader. I've edited the boot.ini every possible way I can think of, but nothing works. I've done this plenty of times using a linux boot loader or dual booting from a single drive but I cant figure this out. I haven't been able to find any reference to this subject anywhere, but I think it would work. Anybody have a clue as to how to do this? I know I can use a different boot manager to accomplish this, I just wanted to make the Win boot.ini work. Or, does anybody know of a good boot manager if I cant make this work?
View 9 Replies
View Related
Aug 29, 2009
I have dual booting on my PC with Vista home premium on a 500 Gb SATA disk and XP Pro on a 250Gb SATA, both internal. Vista no longer holds terrors for me and I'd like to get rid of XP and regain better use of the 250Gb HD. Can I just remove XP from the control panel in the XP boot or is it a lot more complicated?I don't really want to re format the XP drive as I'd have to transfer a lot of data and files
View 3 Replies
View Related
Jul 23, 2005
I have Win XP home installed as OEM software on the C drive of my PC.
I also have this OS as a Norton Ghost file supplied with the PC as a
"Recovery CD".
I have installed a second hard drive designated "D"
This all works fine.
I wish to install Win 2000 (which I have on a Microsoft cd) on the second HD.
I would then hope at boot - up to be given the choice of which OS to load.
Can anyone tell me what is the simplest way to do this?
View 3 Replies
View Related
Feb 1, 2008
I am running Windows XP and would really like to share the hard drive with another OS "Linux" and dual boot.
View 1 Replies
View Related
Mar 21, 2008
ive just dual booted win 98/xp and im hoping to install ubuntuis there any way i can create enother partition without having to reinstall either os
View 7 Replies
View Related
Sep 2, 2007
i tried to reinstall windows Xp and a error came up saying unable to start the partition . then when i press ok on the error it reboots my computer. i cant reinstall my computer
View 3 Replies
View Related
Feb 16, 2006
You think if reinstall with the special xp disk that came with my toshiba a70 will it automatically think I want to reset everything, reformating my hard-drive and thereby losing everything on my storage partition?
View 1 Replies
View Related
Jan 31, 2007
I reinstalled my OS several months ago, and decided that I might want a dual boot in the future. I already had an old, smaller drive in the machine that's labeled the c: drive.
Reading one time that for security purposes it's good to have your OS on a drive other than C:, I decided to not alter the drive lettering.
I then partitioned a new internal hard drive into several logical drives. I formatted the D: partition as a Dos fat32 partition and the rest as NFTS partitions. Somehow, I allowed the D: partition to be the primary partition, while the E: partition which contains the Win 2000 Pro OS Winnt directory is a logical drive.
When I just checked disk management, I noticed that not only is boot.ini on the D: Dos partition, but so is ntldr along with the following Dos setup files:
ndetect.com
arcsetup.exe
arcldr.exe
View 2 Replies
View Related
Jun 24, 2005
I Installed a 2nd HD and cloned my first HD to it as a backup and would like to be able to dual boot. This is XP Pro. I would like to know what numbers to use in multi, disk, and rdisk.
View 3 Replies
View Related
Mar 8, 2006
I have a dual boot system (2 hard drives) booting Suse and XP and boot up through Suse's built in boot manager which gives me the option of booting to Windows or Linux. But since I barely ever use Linux I want to delete it off the 2nd drive so I can use it for a storage drive, so I'm wondering how to replace the Windows Master Boot Record so I can just boot into my XP drive. I'm scared that once I delete/reformat the contents of the 2nd hard drive (I'll probably use Partition Magic to do this through my XP drive) that I won't be able to boot XP up anymore. So before I do anything I want to just be able to boot into XP and bypass the linux drive before I delete it to make sure everything is ok.
View 2 Replies
View Related
Jan 1, 2008
I have a new laptop that came with Windows Vista. I have been trying to load it with Windows XP because Windows Vista didnt work. I am pretty sure a format and clean install will wreck my warranty, hence the dual boot. So far, I have been able to partition and install XP SP-2 to a partition. I've booted into XP fine but my Vista partition is not available. I think that the partition table or MBR has been corrupted.
So to repair this, what I did was boot up from the Vista recovery DVD and run the 'startup repair' option to reload the bootloader for Vista and thus, enable dual booting. When I rebooted I got a black screen saying 'Invalid Partition Table' or something to this effect. I tried repairing the MBR and so on and so forth from the console on the recovery DVD but this proved to be pretty much totally fruitless. So I went through and did an install of Windows XP once again, to my other drive partition I had created. So I am basically where I started.
View 1 Replies
View Related
Sep 6, 2006
I just upgraded my system a couple days ago and have been having several issues. First, Vista wouldn't recognize my onboard sound and LAN from a fresh install No available drivers, go figure. So, I had to install two copies of Win XP SP2, and then upgrade one of them to Vista. A pain, but the only way I could get everything to work properly.
I got everything where I wanted it, life is good. Then I'm booting into Win XP and I have two identically named Win XP OS's in the bootup screen. So as not to confuse my wife, I went into the Startup and Recovery options menu (Again this is in XP) and deleted, what I thought, was the XP I used as an upgrade to Vista. Turns out I got the wrong one. Now I can't boot to XP, but Vista is working fine. Basically, when I choose "Earlier Versions of Windows" I get HD activity for a moment, but then everything seems to halt. No responce from the keyboard, so I have to do a Hard Re-Boot.
View 3 Replies
View Related
Sep 7, 2009
I have had this weird problem that seems random (i know computers arent really random but I cant figure out the cause). I have Win7 and WinXp in a dual boot working fine then after like a week of everything being fine my XP will not boot. I get to the Boot Manager and select XP and the screen just goes black and the system reboots back to the Boot Manager. I am having trouble finding the exact problem because I dont know win booting very well. I am assuming the MBR is fine because it gets to the Boot Manager fine. So I figure it is something with the WinXP partition. Win7 boots perfect. I have tried resetting up the boot with Easy BCD 2.0 beta (way better than 1.x) with no success.
This is not the first time this has happened, I end up having to either install XP fresh or do a repair install. I made a Acronis True Image backup and when everything was working then restored it with no success. I am getting really sick of this happening though because this is like the 6th time this has happened. The XP install is only used to game so it is bare minimum programs. I would appreciate any help in finding the route of the problem so that I can fix it instead of reinstalling the OS.
View 1 Replies
View Related
Aug 26, 2005
I cloned a hard drive which had Windows XP on it (the hard drive was going
out) and the new hard drive would not boot unless I booted first to a floippy with boot.ini, ntldr, and ntdetect.com. Have tried recovery console and everything else I can think of, but the system WILL NOT boot to the hard drive. I checked the boot.ini file for improper boot, but everything looks The old hard drive had two partitions on it, but the hidden partition was corrupt so I deleted it. I changed the boot.ini file settings accordingly.
View 1 Replies
View Related
Feb 17, 2007
i was trying to restore my backup of the partition with the windows xp system on it. Of course, everything went wrong and Norton Ghost 2003 had an error at about 95%. I thought i can just boot from the win xp cd and fix the problem... no way when i try to boot from the win xp cd, i get a black screen after checking my pc configuration, no driver loading etc.
when i try to boot from my sata drive, it says that there are some missing files (that's not strange, if ghost didnt work like it should) when i try to boot from any other drive i get an error like this: A problem has been detected and Windows has been shut down to prevent damage to your Computer. If this is the first time you've seen this Stop error screen, restart your computer.If this screen appears again, follow thease steps: Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run chkdisk/f to check for hard drive corruption, and then restart your computer. Technical information: STOP: 0x0000007B(0xF8958640, 0xC0000034, 0x00000000,0x00000000)
View 4 Replies
View Related
Dec 9, 2005
I had a Win 98 SE PC on a 20 GB drive (FAT32), and then I decided to ad an 80 GB and install Win XP. Since I wanted to maintain some Win 98 function compatibility, I opted for dual-boot, formatting my 80GB HD to NTFS and installing all of the Win XP OS into that drive. The Win 98 runs fine and is limited to the 20GB FAT32 HD, while the Win XP can see both drives but its files and programs are contained in the 80GB NTFS HD.
Now that I have deemed the Win 98 OS no longer necessary for this machine - I am trying to figure out how to make my machine boot from the XP HD (I plan to format the 20GB disk and use it for back-up storage
View 6 Replies
View Related
Apr 3, 2007
I have successfully cloned my primary c partition of a dual boot system with XP Pro on the 1st primary partition c: and XP Pro on the 2nd primary partition as d: I can boot into my XP on the c: drive with no problem, but when I attempt to boot into my XP on the D drive it hangs on the blue screen right before booting into the user profiles. And believe it or not it continuously loops making the windows startup sound and the shutdown sound. It does the same in safe mode. I will try to explain the process on what I did so it can help you experts figure out this dilemma that I'm having. My old drive an IDE 100GB IBM primary drive was partitioned into 3 parts:
c: 30GB FAT32 primary
d: 30GB FAT32 "
e: 30gb FAT32 "
All ran great in XP's on c: ,D: and :e except that i was running out of room in all the partitions and the drive is getting very old , I think (5yrs). I used XXClone Pro v.0.58.0 to clone my old c: and d: partitions to a WD IDE 160GB. I tried many other cloning proggys like Acronis True Image, Drive Clone, Paragon Drive Copy, Drive Image 2002, HDClone 3.1 Pro but they all either changed my new drive NTFS file system to FAT32 or made exact same size copies. I formatted and partitioned my new drive as follows:..............
View 2 Replies
View Related
May 21, 2010
I have done some searching and it seems that other people who have had this problem, have been installing ubuntu. I havn't managed to come to a solution. I installed XP(1) onto drive 1 , then reorganised all of my partitions to be in the correct order with the correct labels (I have been having a nightmare with volumue labels being incorrect!). Anyways got all the partitions exactly how I want them using partition manager (i.e XP(1) on C: with the intention to install XP(2) on D. Rebooted machine, pressed a key to boot from CD, it says 'setup is inspecting your current configuration' and then the screen stays black (I have to reset the machine). I turned off the computer and dissconnected drive 2 (int.) and drive 3 (ext.). Problem still exists.
View 2 Replies
View Related
