I have installed XP Pro on my D drive in order to practise for the MCDST. However the WLAN drivers for XP Home don't work for XP Pro. Do XP Home and XP Pro require different drivers? Because all other hardware works fine.
All things were fine and I had XP pro and XP home installed and working on seperate drives. I have just reinstalled XP pro and now on booting, no option to choose either operating system appears. I have done some searching and have seen references to copying a boot file from the CD and placing it into the XP home operating system to fix this. The instructions were not that detailed and not directly related to having 2 XP installs. nearly all search results I have found related to Xp dual booting with Vista. I have been thinking of now copying ALL the files from the XP Home operating system into the new XP Pro and then reinstalling the XP Home system. Sigh. I cannot use the system repair/recovery option as I do not know the Admin password. where did I put that? Is there an easy fix to get the dual boot working again?
Recently my Windows Xp and Vista dual boot computer suffered from a hard drive crash, corrupting the System registry file in Windows Xp. If I was to replace Windows Vista with a second copy of Windows Xp, how would I go about copying all of my drivers, settings and so on and so forth ? Also I have been told that the Windows Xp System file is different on every computer, so is there a way of generating a new System file, as I have recently changed my hardware.
I am attempting to install Win XP Pro into a second partition to dual boot with an original install of Win XP Home. Both are installed and working with the exception of an application that I installed in Win XP Pro that apparently has some hardcoded assumptions that the product is installed on the C: drive. Since Win XP Home was the originally installed OS, it has drive letter C:, with Win XP Pro getting assigned drive letter E: when it boots.
Ideally, I would like to have each OS bootup with its boot partition appearing as drive letter C:. The other OSes boot partition doesn't necessarily have to even be seen when the other OS boots, although it would be nice. There is also a third partition on the drive which I need to be available to each OS when booted, again preferably as the same drive letter. There are also a CD-R and CD-RW drive installed, which prior to the Win XP Pro install appeared as drive letters D: and E:.At this point I am looking for the easiest/quickest way to obtain the desired results, ideally without having to uninstall/remove either or both. I am willing to look at a third party boot and/or partition manager as well as manually switching between active partitions within Win XP Home or Pro prior to reboot.
I would like to load XP Pro on an XP Home PC and have a dual boot (do not want to lose the software by a fresh install) Can I have 2 operating systems on the same partition?
With all reasons aside for now (mainly because it would be too much typing), if I were to create another small partition other than my main "C" partition on my 320 Gig drive and install XP Pro on the small partition then would that cause problems and conflicts with my main C partition? The small partition that XP pro would be going on would have the drive letter "G" since I already have "D, E and F" taken up by another physical hard drive, DVD-RAM drive and Removable Disk.
So basically my question is that if I make a small partition "G" on my 320 that has my main partition "C" on it, would I be able to boot normally with each one and not have any conflicts? Also, I assume I would have to download a boot loader. Which boot loader is the best to use? And, this is kind of an experiment process in that I don't know that I will even keep the G partition so if I were to reformat the "G" partition and add the space back to the "C" partition then how would I go about removing the no longer needed boot loader?
I upgraded an XP Home PC to XP Pro using an upgrade disk and some how have got a dual boot situation. On start up I get the option to boot up in XP Home or XP Pro. I just want XP pro how can I get it to cancel the dual boot and go straight to XP Pro
I was having trouble accessing my Windows XP Home edition from my dual boot Windows XP Home/Windows 2000 Professional system. I used both Win2K and WinXP CDs and their respective repair functions and no help. When I select the Windows XP Home operating system from the boot select menu I get a message that some file for Windows 2000 is corrupt and to use the Windows 2000 CD or F8 function.
I have a four year old eMachines that has expired and isn't worth repairing. I would like to use the OEM Windows XP Home restore disc from this computer to dual-boot my Vista machine (HP Pavilion a1730n). Is this:
1. possible? 2. ethical?
I want to do this because I can't use many of my programs on the Vista machine. If I can dual-boot the eMachines restore disc I can use Windows Home until vendors catch up with Vista.
I recently purchased a notebook with XP Home SP@ proinstalled. I upgraded to XP Pro but had to do a complete intall rather than an upgrade because my xp pro update cd was older than xp home sp2. I now have a windows (xp home) and a windowsp (xp pro) folder.
I have 2 internal SATA disks and one external USB 2.0 drive. I had XP SP 2 running just fine, but I decided to give Vista RTM a try, so I installed Vista RTM on the first SATA drive (receated the partition).All drives have NTFS file systems.Since Nvidia does not have a decent Vista driver yet, I decided to do a XP installation on the 2nd SATA drive, just for when I want to play a game. And here is my problem:When booting of the XP SP2 CD, I can only see the USB drive available for the install, all the SATA drives are shown as "Unknown Disk" (No disk present).
I want to dual-boot this machine with Windows XP, and the reason is: Vista is making Halo:Combat Evolved (my favorite online game) very slow at 20fps. This may be nVidia's fault, but people who use XP and have the same (or closely similar) hardware and drivers as me don't have this problem. I have 50GB of free hard drive space. Windows Vista is my current OS. I love Halo so much I am willing to drop some more cash into my computer to dual boot with Vista and XP so I can play it s'more.
I have Windows XP home edition already installed on my system and I for some reasons I want to reinstall them on a different hard drive (I have 2 IDE drives). It is very important that my initial windows setup, the one I am running on now, will be working after the new installation too. Is that possible?
I managed to create a new partition on my Compaq Presario C700 laptop and install XP. (It came with Vista).First thing I noticed was that I can not detect any wireless networks or connect to the internet now. I am assuming that I need that driver and a whole bunch of other XP drivers as well. I have visited websites where they have a whole laundry list of drivers to download for my situation. Before I go through the painful process of downloading and installing all of them, I want to make sure this is really what I need to do.
So I'm using my a8n-sli premium motherboard and have been just using 1 sata hard drive using Windows XP for about a year. I bought a second sata hard drive last week and installed Vista on it.I just can't figure out the correct boot.ini for this to work,I get an missing NTLD message, when I try to boot from Vista, but the XP one works with that configuration.I can boot off the Vista one fine if I set it in the bios boot order to come up before the XP hard drive, so the drive and the OS are fine
I was running a dual boot of windows XP and Ubuntu Linux prior to installing Vista beta 2. Now, after upgrading windows XP to vista beta 2 i no longer have the boot screen that allows me to chose between my linux boot and my vista. Any way i can get back into linux? I did not make a boot disc for linux.
I purchased a SIIG PCI firmware adapter. It has no drivers and says that it will use Win XP drivers. Well I installed the board and booted the pc, Win XP recognized the hardware but could not find any drivers. I tried unplugging it manually, installing it in another card slot with no luck. I took it back to my pc dealer and he plugged it in his system and had no problems. I decide to try another brand, an IO Gear GIC1394.
I have been trying to install Windows XP as a second OS as I already have Windows 7 Ultimate installed. Unfortunately, after I select a partition, format it, and reboot the system stalls on the screen after the BIOS that has something to do with a list of devices and such. After 10 or so seconds a few characters and letters go blank randomly on the page. I rebooted and selected my cd drive as the boot device and accidentally didn't press a button in time to boot and a bunch of highlighted numbers were thrown all over the screen and a random smiley face on one of the lines.
I'm trying to dual boot 2 different installs of xp pro from 2 drives using the Windows boot loader. I've edited the boot.ini every possible way I can think of, but nothing works. I've done this plenty of times using a linux boot loader or dual booting from a single drive but I cant figure this out. I haven't been able to find any reference to this subject anywhere, but I think it would work. Anybody have a clue as to how to do this? I know I can use a different boot manager to accomplish this, I just wanted to make the Win boot.ini work. Or, does anybody know of a good boot manager if I cant make this work?
I have dual booting on my PC with Vista home premium on a 500 Gb SATA disk and XP Pro on a 250Gb SATA, both internal. Vista no longer holds terrors for me and I'd like to get rid of XP and regain better use of the 250Gb HD. Can I just remove XP from the control panel in the XP boot or is it a lot more complicated?I don't really want to re format the XP drive as I'd have to transfer a lot of data and files
I have Win XP home installed as OEM software on the C drive of my PC. I also have this OS as a Norton Ghost file supplied with the PC as a "Recovery CD". I have installed a second hard drive designated "D" This all works fine. I wish to install Win 2000 (which I have on a Microsoft cd) on the second HD. I would then hope at boot - up to be given the choice of which OS to load. Can anyone tell me what is the simplest way to do this?
Two computers both running windows XP. I just installed DSL and it came with a combo modem router from Embarq. I have everything working but the laptop's abiltiy to access files on the desktop. The wireless router acts as both internet access and WLAN hub I believe. I have tried for two days now and failed. Had a good thread here, but it lead me to Microsoft and new updates. After new updates lost thread. There is a site that has you fill out a form and try fixes, i was on that most of the day and learned a lot but still no resolution.
I have installed windows 2009 SP3,my laptop is HP compaq presarios 3700, I but still cannot log in to the internet, whenever I start my OS showing me the wireless WLAN is disabled,I went to check device manager and checked under : Network Adapters, I saw only 1394 Net Adapter, this is the only device there, what should I do to fix this problem or find the software to fix it
i currentlly have a 500 gb hard drive with windows xp home on it and i have an extra hard drive sitting on my desk, a seagate barracuda 1 tb hard drive, and i will be purhasing xp por 64-bit, and i wanna know if i can just put in my 1 tb hard drive and install xp pro on that and then to choose wich os to run, i know dual botting is possible im just not sure how i am going to go about installing it onto my 1 tb hard drive
I recently built my new dual core PC and I have set up my bios, etc. I'm ready to install an OS. What I'm wondering is - what is better for a dual core pc? XP Pro or XP Home and why?