Drivers For IDE ATA/ATAPI Controllers Standard Dual Channel PCUI IDE Controller

Feb 3, 2008

Were do I find a free upgrade for the above driver? That should read PCI in the title not PCUI.

ATA / ATAPI Controllers And Slow Comp!

Dec 5, 2007

I have this major problem where my comp runs uber-slow untill I uninstall all the ATP/ATAPI controllers from my Device Manager and reboot. But the moment I reboot Windows reinstalls them again and after my next reboot my data transfer, and my comp in general is slow again.I have no clue as to why my comp runs fine without those controllers, but the moment they auto-install my comp becomes slow and jerky again.

View 2 Replies View Related

Dual Tuners In MCE 2005: Watch One Channel While Recording Another?

Aug 31, 2006

My new rig recently had a Hauppage WinTV PVR-150MCE analogue TV Tuner attached. Following advice from this forum I was told that I could add any other TV Tuner in addition to what I currently had - it was impossible to add another identical PCI tuner because I am out of slots in my motherboard. So I got the Hauppage WinTV Nova-T DVB USB2.0 Stick - it fits in the USB port, provides me with DVB TV and doesnt have an excess unwanted remote control as I already have an MCE remote that came with the PVR-150MCE.

Now in MCE 2005 I cannot seem to record one channel while watching another. It keeps coming up with the message "Media Center is currently recording X do you want to stop recording and change channel?" - I want to change channel and KEEP recording going, why not do what I bloody well want and look for the other second tuner!!!) Why oh why doesn't Media Center use both the TV Tuners to its full potential?? I thought Media Center 2005 could utilize both tuners so I could watch one channel while recording another regardless of what type of tuner they are.

View 6 Replies View Related

USB2 Host Controllers/reverting MS Drivers

Oct 1, 2008

I've recently reinstalled XP on my PC using the recovery CD that came with it but I've noticed that the USB Host Controllers seem to indicate I only have USB1 and not USB2 like I had pre-reinstall. I've tried my hardest to locate them to no avail but stumbled across this which is for my particular PC but I am having a dumb moment and don't know how to revert to MS drivers. It's XP Home with SP3 installed.

View 6 Replies View Related

Installing Drivers Ethernet Controllers - Cannot Connect To Internet

Oct 11, 2010

Reformatted sons computer and re installed Windows xp. Cannot connect to internet because there are no ethernet controllers, or video, and audio. This I expected and thought all I had to do was download drivers for the MS-7050. I have been at it 6 hrs now and cannot find them! I know I found before but cannot quite remember what I found. Am I looking for the wrong thing to get the controllers etc working? Its a HP dx5150, AMD 64 Athlon. Motherboard is MS-7050 Ver 1.3

View 2 Replies View Related

Dual Booting To HDDs - Secondary Master Ide Controller

Apr 12, 2008

somehow, i accidently stumbled into a method of dual-booting 2 OpSystems (WinXP/WinME specifically). I have WinXP on one HDD, set as active on the Primary Master ide controller. I also have WinME on another HDD set as active on the Secondary Master ide controller.i can choose which OS to bootup at whim, simply by going into BIOSBoot Tabhit enter on HardDrive and then choose which HDD to boot. Then i exit that tab, exit BIOS "SaveYes". Either HDD will boot. its simple, it works well. its differant from the orthodox way of setting up a dual-boot. Booting NTFS WinXP, files on the WinME FAT HDD are read by XP. But not the other way.

View 6 Replies View Related

Vista / Dual Boot - SM Bus Controller Driver Wont Work?

Jan 20, 2009

I have just set up a dual boot with XP Home on my Vista system, but in the device manager under XP i am missing drivers for "SM Bus Controller".

View 3 Replies View Related

Ethernet Controller - How To Upgrade/install The Right Drivers?

May 25, 2006

ethernet controller i dont know how to upgrade/install the right drivers, i know thatr my motherboard is the ASUS A7V8X ... but i'm having problems finding the right drivers

View 14 Replies View Related

Unable To Find Missing Drivers Of Ethernet Controller?

Sep 20, 2008

i just installed xp pro on my gatway 450rog all is working well but in the other device there are 5 things with yellow ? on them not the netork card that is fine but the ethernet controller,modem, how do i fix this i can not get it to conect to the internet to update thses

View 10 Replies View Related

Unable To Find Drivers For Audio/ PCI Modem / Network Controller?

Sep 14, 2008

i just did a clean install on my laptop and upon checking device manager i encounter question sign for (1)Multimedia audio controll (2)Network controller and (3)PCI Modem.Isearch Toshiba site and they do not list my model computer and i have seen the AC97 audio driver elsewhere but it just wont work. Anyone care to point me in the right direction.System is Toshiba Satellite A55-psa50u-03c021, serial number 64094885H, Chipset i855GME. Sound card is AC97(82801db)

View 2 Replies View Related

Settings And Drivers Dual Boot

Oct 11, 2008

Recently my Windows Xp and Vista dual boot computer suffered from a hard drive crash, corrupting the System registry file in Windows Xp. If I was to replace Windows Vista with a second copy of Windows Xp, how would I go about copying all of my drivers, settings and so on and so forth ? Also I have been told that the Windows Xp System file is different on every computer, so is there a way of generating a new System file, as I have recently changed my hardware.

View 4 Replies View Related

No Longer Available Other Than System Builder Channel

Aug 14, 2007

Article New Windows XP Service Pack (SP2c) To Fix Product Key Shortage. Microsoft says Windows XP Professional with Service Pack 2c is the result of "the longevity of Windows XP Professional", which has made it necessary to create more XP product keys for system builders, who will be permitted to sell the operating system through January 31, 2009. For all of Microsoft's other channels, Windows XP Professional will no longer available after January 31, 2008 " just over five months from now.

View 2 Replies View Related

Dual Boot Home And Pro - WLAN Drivers Don't Work?

Mar 9, 2009

I have installed XP Pro on my D drive in order to practise for the MCDST. However the WLAN drivers for XP Home don't work for XP Pro. Do XP Home and XP Pro require different drivers? Because all other hardware works fine.

View 2 Replies View Related

Boot From Atapi ROM?

Sep 2, 2006

Every now and then my PC (WinXP, Soltek MB) will pause at boot up after showing the two optical devices (first is a CDRW, second is a DVDRW) with the message after identifying the two optical drives "Boot from atapi ROM". Within a second or two it continues to boot up and everything seems normal EXCEPT when you push the DVD drive button, although its light comes on the drawer does not open! A re-start has always cured it. Consulting the various items in XP tellls me the "device is working normally".

View 8 Replies View Related

Atapi Device Did Not Respond

Aug 20, 2005

I dont know what this means Saturday, August 20, 2005 atapi The device, DeviceIdeIdePort1, did not respond within the timeout period what does this mean and how do i fix it? i found the error on ADVANCED SYSTEM INFORMATION - ERROR LOG

View 1 Replies View Related

Atapi.sys And Usbport.sys Failures - BSOD

Dec 13, 2006

I have been getting repeated BSOD for the past few months and I have tried all I know to remedy it. It crashes for no apparant reason and is annoying the hell out of me.When it blue screens I have been getting repeated 0x000000d1 codes but with different driver locations. I have either getting usbport.sys or atapi.sys. Atapi.sys seems to be the more common of the two. I tried running System File Checker (sfc) and got 99% through before is BSOD again!I have examined the screeds of info on the Microsoft website and nothing looks overly relevant or matches the symptoms I have been experencing.

View 3 Replies View Related

Blue Screen Atapi.sys Prevx

Oct 28, 2009

can some one figure this out. I can not find any posting on the web about the following error.I am using dell inspiron 9300 running xp pro sp2.downloaded trial prevx from the web and when double clicked on the file to install, windows dataprotection message appeared to prevent instalation. Cpu was active, I quickly started system restore. The system will not boot to windows or access safe mode or any other mode. Tried microsoft article 307545 but the system started to go into loop and will not boot to any mode even though the blue screen is hardly visible now.

View 7 Replies View Related

2003 Domain Controller Communicate With A 2000 Domain Controller?

Feb 22, 2008

Can a Windows 2003 Domain Controller communicate with a Windows 2000 Domain Controller? The reason I ask this is that I want to upgrade my Domain Contoller to Windows 2003, but want to have the backup Windows 2000 machine running as a backup Domain Controller.

View 1 Replies View Related

Too Many IDE Controllers

Jul 30, 2007

My PC recently started to really slow down. I realized I had also recently had to re-install a DVD drive after it just disappeared and that I might have an IDE issue.I uninstalled all the controllers as recommended on a separate thread. There were 3 Primary and 3 Secondary despite the fact I only have 2 Hard drives and 2 DVD drives. This did the trick and my PC is now booting like it used to but I'm concerned that it still thinks I have 3 of each IDE controller. Surely I should have 2 of each. Does this sound right? I'm concerned that the problem will re-occur if I don't properly fix it. I've had problems with DVD drives disappearing before, though not for a while.

View 5 Replies View Related

USB Controllers Disappeared.

Dec 25, 2006

I'm using an IBM NetVista, Intel(R) Pentium(R) 4 CPU 1.80GHz and one night, powers went out. And when I turned my PC on, USB ports aren't working. To my surprise, at the device manager, USB section was gone. It was undetected, or w/e.

View 3 Replies View Related

Updation Of USB Host Controllers

Aug 1, 2005

I have an Intel 865 board and XP running. The board has 4 USB controllers and hubs. If I want to connect USB2.0 capable devices, do I have to update all 4 controllers drivers, or just one?

View 12 Replies View Related

Hi-speed USB Controllers Popping Up

Sep 8, 2005

I'm having lots of troubles with USB 2.0 support. My mother board is a ASUS P5GD2 Premium, which only has USB 2.0 ports but my Windows XP SP2 keeps popping up this error! I have some drivers, but they don't install because XP SP2 should already support USB 2.0. Maybe the cables that connect the USB ports are the problem.

View 1 Replies View Related

Switching Order Of Controllers In XP

Sep 10, 2005

I had a Thrustmaster Dual Power 4 game pad, and bought a Logitech Rumblepad later. I like the Rumblepad better, and want to consider it my "first string" controller. But if I go into say, Nba Live 2005, and go to choose controllers, no matter what I do, the thrustmaster is on the top of the list, and the logitech is on the bottom. All the old posts talk about choosing Preferred device in the control panel. By running DxDiag, I can see that setting something as the Preferred Device assigns it Controller ID 0. But I also see that the order of the Controllers, as recognized by most games, is the same as the order listed in the game controller control panel, and is completely unrelated to which device is "controller id 0" and "preferred device." For example, I set the logitech as preferred device, and plugged in the thrustmaster and also a gamepad pro.

View 4 Replies View Related

Touch Not Working / Bad Drivers Installed Drivers Over Bad Drivers

Oct 9, 2010

How do I uninstall all drivers associated with my (windows xp) touch pad. Touch Pad is not working / bad drivers installed drivers over bad drivers.

View 1 Replies View Related

Stopped Reognizing The USB? Cant Install USB Controllers

Nov 26, 2006

I have an external hard drive that was working fine on my USB port but at some point my Dell Laptop with Windows XP stopped reognizing it. I tried the external hard drive in another XP desktop and it works fine. I have a USB mouse that worked fine so the port was OK. I tried reinstalling the external hard drive several times and tried to use another external hard drive that I verified worked on another computer but that also would not install. I broused your forum and tried the registry patch.

http://forums.techguy.org/3435808-post2.html

Now I can't install the USB controllers either.

View 14 Replies View Related

Domain Controllers - Server On Workgroup

Jun 5, 2006

I have installed this OS on a new Fujitsu PRIMERGY TX150 S4. Now I want just to use this Server as a server on a Workgroup. But the OS insists that it should be the Domain Controller. And then it just shuts it self down. Below is a log from the event viewer. Just don't really want to configure the entire Lan from workgroup to Domain.

View 6 Replies View Related

Uninstalling USB Controllers From Device Manager

Feb 17, 2008

I tried uninstalling the USB controllers from the Device manager restarting my computer, and waiting for the pc to re-install the devices itself. Unfortunatly, nothing happens. It DOES find the devices, it DOES reinstall everything, but when i plug in even the mouse, i get the same error msg. The usb ports are named "Unknown Devices" and when i check their properties, the have no drivers installed.

View 4 Replies View Related

USB Controllers Disppeared From Device Manager

Apr 23, 2006

The Data Transfer status on my HDDs was PIO mode and I wanted to make it DMA so that my access speeds become faster. All I did was update my Primary IDE Drivers. They got updated and DMA mode was enabled. But during this I dont know what happened, but my device manager no longer displays Universal Serial Bus Controllers. The entire thread has disappeared (it doesent show up even when I do "Show hidden devices").

View 8 Replies View Related

System Unstable - BSODs - Disabled IDE Controllers

Oct 14, 2006

I've had this ax8 board for some time. Previously, I'd been using an av8. Here's a run down of what I've experienced. With all the default devices enabled in bios, random irq/driver irq not less than or equal BSOD's. Disabled on board FDC, still bsods. Disabled onboard LAN, still bsods. Disabled IDE controllers, still BSOD's. I've tried a pcie and pci card, still bsods. Tried SATA 3&4, still BSODs. I replaced my USB keyboard/mouse with an old ps/2 keyboard and mouse, unplugged my usb headset, and it hasn't crashed since.

View 4 Replies View Related

Install Standard VGA Driver

Mar 26, 2008

I did an XP update and installed all the Windows updates. Now I cannot install my Radeon SE-DT graphics drivers. I get an "installation failed, try to install standard VGA drivers" note after the most current downloaded driver installation program runs InstallShield. I'm running on an ASUS A7V motherboard (1011 BIOS) with AMD Athlon processor and 768 MB of Crucial RAM; 2GB Maxtor drive. I'm using LiveOne Care for security.I'd lime to know if the motherboard chipset drivers can be updated from within Windows without doing the floppy disk boot.

I'm running graphics on the VGA save mode and it is goofy scrolling down a screen watching the waves as the data clunks in. Can anyone suggest an easy install? ATI Radeon has been no help so far. By the way, Device Manager shows no video display components from which verify or update drivers.