I've recently reinstalled XP on my PC using the recovery CD that came with it but I've noticed that the USB Host Controllers seem to indicate I only have USB1 and not USB2 like I had pre-reinstall. I've tried my hardest to locate them to no avail but stumbled across this which is for my particular PC but I am having a dumb moment and don't know how to revert to MS drivers. It's XP Home with SP3 installed.
View 6 RepliesI have an Intel 865 board and XP running. The board has 4 USB controllers and hubs. If I want to connect USB2.0 capable devices, do I have to update all 4 controllers drivers, or just one?
View 12 Replies View RelatedReformatted sons computer and re installed Windows xp. Cannot connect to internet because there are no ethernet controllers, or video, and audio. This I expected and thought all I had to do was download drivers for the MS-7050. I have been at it 6 hrs now and cannot find them! I know I found before but cannot quite remember what I found. Am I looking for the wrong thing to get the controllers etc working? Its a HP dx5150, AMD 64 Athlon. Motherboard is MS-7050 Ver 1.3
View 2 Replies View RelatedWere do I find a free upgrade for the above driver? That should read PCI in the title not PCUI.
View 7 Replies View RelatedWhenever I have any programs or apps running they are forced into the background.
View 7 Replies View RelatedI need to revert/reformat (not sure of the correct terminology)my windows xp laptop to the factory settings. I do not want to use the CD's.There is a way to do it by pressing "f" something, or control something while the computer is starting up. But I can't find the correct combination of keys to press.I've been searching for the answer to my question for the past half-hour to no avail.
View 8 Replies View Relatedi was working on a computer the other day helping someone "clean it up" and make it run faster. i did all the normal "clean up" stuff, got her back online, pc running much faster, everyone's happy.except for one thing: one of her original complaints was that her desktop background had recently reverted to all RED with this image in the middle that looks something like a biohazard logo. i tried changing the desktop background via the control panel, and it changed momentarily and then reverted back only moments later. I ran avg anti-virus and spybot to sweep her machine of any bugs/viruses (and found quite a few). when i left the red desktop was gone.
View 10 Replies View RelatedHow can I prevent windows from reverting to the logon screen after a period of inactivity? I am using Windows XP Professional SP-2 in a Work group. After logging in with a password, the screen comes up again after a few minutes of inactivity and I have to provide the password again. This happens continuously throughout the day.
View 2 Replies View RelatedI have a Epson RX500 printer and i keep getting a pop up box telling me this device will perform faster if i connect it to one of the available usb2 ports but it says click here to see all available ports which it shows as all being empty even though other devices are plugged into them.
View 4 Replies View RelatedI freshly re-installed my window xp home edition. Unfortunately, can't get my USB to work at 2.0 speed. all of them at USB1.0 speed now. My XP is SP3 and frequently updated. I've tried to update USB driver through Device Manager but still does not solve the problem. Now, the file transfers take hours.
View 5 Replies View RelatedAt startup 2 days ago my desktop colour scheme was reset to classic with grey taskbar etc. When I tried to change it back to silver I found that the windows xp style in display properties appearance windows and buttons, was gone and only windows classic style was present. Confused I though maybe I needed to do a windows update. I proceeded to do so and while I was at it updated to SP3. After doing this I could successfully change my colour scheme back to silver and change the size of my active title bar and menu font etc back to the way they were. But now whenever I restart my PC the colour scheme has reverted back to the default blue xp theme and the size changes back to default as well.I'm at a aloss because I have windows auto updates turned off and had installed no new software the night before this happened.I should also add that I have already done a virus scan, Malwarebytes Anti-malware scan and a Spybot search and destroy scan but found nothing.
View 1 Replies View RelatedTwo years ago I bought and installed a USB2 Card on my PC (Windows XP with SP2). Last week when I bought a new Printer (Canon MP 750), which uses USB2. When I connected, IT WOULD NOT WORK; but when I connected to a USB 1, IT WORKED, albeit with a message that"IT WOULD WORK FASTER WITH USB2" and inviting me to "clickhere" to find a suitable Port. I did this, of course, but was met with a message that"NO HI-SPEED USB HOST CONTROLLERS ARE INSTALLED ON THIS COMPUTER".
View 3 Replies View RelatedI pluged in usb hub into computer, and everything was fine until 2 days ago. suddenly i get message that usb could preform better if pluged into USB 2.0 port.i tried everything and nothing happened. i tested usb hard drive plugged into hub, and it was very slow. when i pluged usb hard into computer it was normal.then i was mad and destroyed the hub. i bought new one. and same thing.
View 2 Replies View RelatedI am looking at a purchasing a new computer and was wondering which is faster for transferring digital movies USB2 or Firewire?
View 8 Replies View RelatedMy PC had 6 USB1 ports - I upgraded by adding a 2-port USB2 card, with a USB2 4 port hub. When I had XP Home, all was fine. I then crashed my hdd, so bit the bullet, got a new drive, and XP Pro and started again. The (Via) USB2 card was bought new, as was the 4 port hub - I have the driver CD for the card. According to System Manager, everything's fine, working correctly. But every time I try to use my USB2 memory stick in one of the 4 ports on the hub, it comes up with "This would work faster with USB2 - put it in one of the 4 unused ports", which is unmitigated b/s as it's already IN one of them - changing makes no difference.
View 24 Replies View RelatedI have XP pro SP2 so how can I make sure that is my USB2 port is configured and working as USB2 not USB1.
View 1 Replies View RelatedI was having a lot of troubles with XP PRO after a CPU failure, when I tried to do an XP installation Repair. It failed miserably and after a month of posting and searching for answers, I threw in the towel. I reformatted the HD and did a clean install. On the advice of a MS Tech, I downloaded SP3 and installed it first thing. After I got everything up and running with all the updates, I discovered that XP no longer recognizes my USB ports as USB2. I found some original drivers on the Motherboard installation disk, but it will not allow me to install them because my XP SP2 install disk is already supposed to have them. I tried removing all the USB drivers and forcing XP to figure it out, but no luck. It is an ASUS P5GD2 Deluxe with a P4 processer and an XP PRO SP3 Operating System.
View 3 Replies View RelatedI run a system with win xp home and usb1 ports. I want to install a pci card with usb2 ports to use with my new printer. I would like to know what will happened with my usb1 ports after I installed usb2 ports.Will I have both type of ports available in the same time?
View 9 Replies View RelatedMy PC recently started to really slow down. I realized I had also recently had to re-install a DVD drive after it just disappeared and that I might have an IDE issue.I uninstalled all the controllers as recommended on a separate thread. There were 3 Primary and 3 Secondary despite the fact I only have 2 Hard drives and 2 DVD drives. This did the trick and my PC is now booting like it used to but I'm concerned that it still thinks I have 3 of each IDE controller. Surely I should have 2 of each. Does this sound right? I'm concerned that the problem will re-occur if I don't properly fix it. I've had problems with DVD drives disappearing before, though not for a while.
View 5 Replies View RelatedI'm using an IBM NetVista, Intel(R) Pentium(R) 4 CPU 1.80GHz and one night, powers went out. And when I turned my PC on, USB ports aren't working. To my surprise, at the device manager, USB section was gone. It was undetected, or w/e.
View 3 Replies View RelatedI'm having lots of troubles with USB 2.0 support. My mother board is a ASUS P5GD2 Premium, which only has USB 2.0 ports but my Windows XP SP2 keeps popping up this error! I have some drivers, but they don't install because XP SP2 should already support USB 2.0. Maybe the cables that connect the USB ports are the problem.
View 1 Replies View RelatedI had a Thrustmaster Dual Power 4 game pad, and bought a Logitech Rumblepad later. I like the Rumblepad better, and want to consider it my "first string" controller. But if I go into say, Nba Live 2005, and go to choose controllers, no matter what I do, the thrustmaster is on the top of the list, and the logitech is on the bottom. All the old posts talk about choosing Preferred device in the control panel. By running DxDiag, I can see that setting something as the Preferred Device assigns it Controller ID 0. But I also see that the order of the Controllers, as recognized by most games, is the same as the order listed in the game controller control panel, and is completely unrelated to which device is "controller id 0" and "preferred device." For example, I set the logitech as preferred device, and plugged in the thrustmaster and also a gamepad pro.
View 4 Replies View RelatedHow do I uninstall all drivers associated with my (windows xp) touch pad. Touch Pad is not working / bad drivers installed drivers over bad drivers.
View 1 Replies View RelatedI have an external hard drive that was working fine on my USB port but at some point my Dell Laptop with Windows XP stopped reognizing it. I tried the external hard drive in another XP desktop and it works fine. I have a USB mouse that worked fine so the port was OK. I tried reinstalling the external hard drive several times and tried to use another external hard drive that I verified worked on another computer but that also would not install. I broused your forum and tried the registry patch.
http://forums.techguy.org/3435808-post2.html
Now I can't install the USB controllers either.
I have installed this OS on a new Fujitsu PRIMERGY TX150 S4. Now I want just to use this Server as a server on a Workgroup. But the OS insists that it should be the Domain Controller. And then it just shuts it self down. Below is a log from the event viewer. Just don't really want to configure the entire Lan from workgroup to Domain.
View 6 Replies View RelatedI tried uninstalling the USB controllers from the Device manager restarting my computer, and waiting for the pc to re-install the devices itself. Unfortunatly, nothing happens. It DOES find the devices, it DOES reinstall everything, but when i plug in even the mouse, i get the same error msg. The usb ports are named "Unknown Devices" and when i check their properties, the have no drivers installed.
View 4 Replies View RelatedThe Data Transfer status on my HDDs was PIO mode and I wanted to make it DMA so that my access speeds become faster. All I did was update my Primary IDE Drivers. They got updated and DMA mode was enabled. But during this I dont know what happened, but my device manager no longer displays Universal Serial Bus Controllers. The entire thread has disappeared (it doesent show up even when I do "Show hidden devices").
View 8 Replies View RelatedI have this major problem where my comp runs uber-slow untill I uninstall all the ATP/ATAPI controllers from my Device Manager and reboot. But the moment I reboot Windows reinstalls them again and after my next reboot my data transfer, and my comp in general is slow again.I have no clue as to why my comp runs fine without those controllers, but the moment they auto-install my comp becomes slow and jerky again.
View 2 Replies View RelatedI've had this ax8 board for some time. Previously, I'd been using an av8. Here's a run down of what I've experienced. With all the default devices enabled in bios, random irq/driver irq not less than or equal BSOD's. Disabled on board FDC, still bsods. Disabled onboard LAN, still bsods. Disabled IDE controllers, still BSOD's. I've tried a pcie and pci card, still bsods. Tried SATA 3&4, still BSODs. I replaced my USB keyboard/mouse with an old ps/2 keyboard and mouse, unplugged my usb headset, and it hasn't crashed since.
View 4 Replies View RelatedEver since I did a factory reinstall 3 months ago, every time I close my machine down and restart, my Windows Explorer settings keep getting reverted back to ICON view instead of my saved DETAIL view.I'm using the button under tools and folder options, View Tab, and Apply to all Folders.Is there something else I'm missing?
View 1 Replies View RelatedIn Device Manager, RAID Controllers shows a yellow question mark. Not sure what a RAID Controller is.
View 1 Replies View Related