RAID Controllers Shows A Yellow Question Mark
Nov 4, 2009In Device Manager, RAID Controllers shows a yellow question mark. Not sure what a RAID Controller is.
View 1 Replies
ADVERTISEMENT
Little Yellow Triangle With An Exclamation Mark
Dec 4, 2006I recently noticed that I have this little yellow triangle with an exclamation mark on it. It says that I have PSW.X-VIR Trojan.
View 14 Replies View RelatedDevice Manager Yellow - Mark
May 30, 2008his is my first post so excuse me if its in the wrong place.Device manager/other devicesAudio device on high defenition audio bus Ethernet network controller ?
Video controller These all have the yellow ? markMy mother board is a Gigabyte technology m61p-s3.I have been to the Gigabyte website but dont have a clue what to download.
Error In Status Bar- Mark In A Yellow Triangle
Oct 27, 2006On some websites I get an error message which shows up in the status bar.it is an exclamation mark in a yellow triangle. When this happens, I can't access the website. I have tried several suggestions from Microsoft, but I just seem to trade one problem for another. This first showed up when I "upgraded" to SP2.
View 12 Replies View RelatedEthernet Controller Yellow Question Mark
Aug 12, 2008I had to reformat my hard drive, under the device manager the Ethernet controller has a yellow question mark, now my DSL would not connect, also I thought should be network setting under that, didn't see any. I have windows xp sp2. under PC express controller port one I have the Broadcom NetXtreme BCM5750 Gigabit Ethernet Controller)
View 2 Replies View RelatedDevice Manager With Yellow Question Mark
Aug 29, 2005I reformated the hdd on my notebook and reinstalled XP. I tried to play media player but it did not detect the sound card, it said:error id = 0x80040256 remedy id = 0x00000000 I went into device manager and in 'other devices' there was a yellow question mark and then all those devices (ethernet, multimedia, pci, sm bus control, serial bus control, video control) had yellow question marks next to them.
View 2 Replies View RelatedYellow Question Mark In Device Manager
Feb 18, 2006I just did a complete reinstall of my win XP pro O.S. Computer is working fine. Only one minor problem, I have a yellow question mark in Device Manager under Other devices, Ethernet Controller. Under Network Adapters, I have my USB Cable Modem. Also, under start/control panel/network connections/local area connections - USB Cable Modem. In the past, when I did a complete reinstall of the O.S., I have installed the Broadcom 4401 Integrated NIC driver that came with my Dell resource CD. I would not have a yellow question mark. But then when I installed the USB Cable Modem, I would then disable the Broadcom, since I didnt need it anyway. At this stage I would not have any yellow question marks. This time, since I wasnt using the Broadcom, I did not install it and only installed the USB cable modem. But now I have the yellow question mark. Since the computer is working fine, do I just ignore this yellow question mark issue or is there another workaround. Dell Dimension model 2350.
View 6 Replies View RelatedCode 19 - USB Ports Not Working - Yellow Exclamation Mark
Apr 11, 2005I have a Dell 4600 running XP Home and all my USB ports have suddenly stopped working. When I go to the device manager and expand the Universal Serial Bus Controllers, each of the Intel(R) 8280 1EB VBB Universal Host Controller has a yellow exclamation mark beside them. When I check their status this is the message: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19). I was not in the registry prior to this, so I don't know how it got damaged
I tried this: Click Uninstall, and then click Scan for hardware changes to load a usable driver ? no effect.
I tried this: Restart the computer in Safe Mode, and then select Last Known Good Configuration,which rolls back to the most recent successful registry configuration ? didn't fix the problem. Microsoft says that as a last resort, you can edit the registry directly ? but I not sure where and what to edit in the registry. If anyone can tell me what keys to edit in the registry I would very appreciative. I will do anything to avoid reinstall windows from scratch. I unfortuately didn't have system restore going so I cannot use that.
Can't Delete Temp Files - Yellow Exclamation Mark
Jan 14, 2005i am trying to delete the temp files in the windows/temp directory but they won't delete. It says a program is using them but even when i try and get rid of them in safe mode they won't delete, how can i get rid of them? Also when i try to run a panda online virus scan i click on the scan my computer icon and it does nothing but there is a little yellow exclamation mark on the bottom left of the window, is that why it isn't doing anything and if so, how can i fix it?
View 4 Replies View RelatedDVD/CD-ROM Drives With A Yellow Shreik/exclamation Mark In Device Mana
Dec 9, 2009I have two DVD drives connected to an XP desktop computer, however, they do not work. They appear in Device Manager under DVD/CD-ROM drives with a yellow shreik/exclamation mark preceding the listing The devices are also recognized in the BIOS setup. When I click on the device in Device Manager, I get the message"Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)". One of the devices previously worked correctly. In fact, I completed a clean install of XP using it. Just what does the error message mean Does it mean that the devices are faulty & need to be replaced
View 1 Replies View RelatedInstalling A Raid Array - Original Raid Driver Floppy Disk
Jan 30, 2010i have 2 western digital 80gb on raid0. on this array i have installed windows 7 and now i want to install windows xp on another partition.the problem is that windows xp setup won't recognize my array even with the original raid driver floppy-disk. i created even an nLite customized xp with those drivers installed and it doesn't work.
View 4 Replies View RelatedToo Many IDE Controllers
Jul 30, 2007My PC recently started to really slow down. I realized I had also recently had to re-install a DVD drive after it just disappeared and that I might have an IDE issue.I uninstalled all the controllers as recommended on a separate thread. There were 3 Primary and 3 Secondary despite the fact I only have 2 Hard drives and 2 DVD drives. This did the trick and my PC is now booting like it used to but I'm concerned that it still thinks I have 3 of each IDE controller. Surely I should have 2 of each. Does this sound right? I'm concerned that the problem will re-occur if I don't properly fix it. I've had problems with DVD drives disappearing before, though not for a while.
View 5 Replies View RelatedUSB Controllers Disappeared.
Dec 25, 2006I'm using an IBM NetVista, Intel(R) Pentium(R) 4 CPU 1.80GHz and one night, powers went out. And when I turned my PC on, USB ports aren't working. To my surprise, at the device manager, USB section was gone. It was undetected, or w/e.
View 3 Replies View RelatedUpdation Of USB Host Controllers
Aug 1, 2005I have an Intel 865 board and XP running. The board has 4 USB controllers and hubs. If I want to connect USB2.0 capable devices, do I have to update all 4 controllers drivers, or just one?
View 12 Replies View RelatedHi-speed USB Controllers Popping Up
Sep 8, 2005I'm having lots of troubles with USB 2.0 support. My mother board is a ASUS P5GD2 Premium, which only has USB 2.0 ports but my Windows XP SP2 keeps popping up this error! I have some drivers, but they don't install because XP SP2 should already support USB 2.0. Maybe the cables that connect the USB ports are the problem.
View 1 Replies View RelatedSwitching Order Of Controllers In XP
Sep 10, 2005I had a Thrustmaster Dual Power 4 game pad, and bought a Logitech Rumblepad later. I like the Rumblepad better, and want to consider it my "first string" controller. But if I go into say, Nba Live 2005, and go to choose controllers, no matter what I do, the thrustmaster is on the top of the list, and the logitech is on the bottom. All the old posts talk about choosing Preferred device in the control panel. By running DxDiag, I can see that setting something as the Preferred Device assigns it Controller ID 0. But I also see that the order of the Controllers, as recognized by most games, is the same as the order listed in the game controller control panel, and is completely unrelated to which device is "controller id 0" and "preferred device." For example, I set the logitech as preferred device, and plugged in the thrustmaster and also a gamepad pro.
View 4 Replies View RelatedKeyboard Is Not Working Upto The Mark
May 20, 2008My keyboard won't type. I have to hold the letter down until my tower clicks twice then the letter types. I thought it was keyboard, got new one, still not working
View 7 Replies View RelatedQuestion Mark Next To The Ethernet Controller
Apr 11, 2006When I go into Device Manager, under Network Adaptors, there is a question mark next to the Ethernet Controller. What do I need to do to get this up and running
View 6 Replies View RelatedStopped Reognizing The USB? Cant Install USB Controllers
Nov 26, 2006I have an external hard drive that was working fine on my USB port but at some point my Dell Laptop with Windows XP stopped reognizing it. I tried the external hard drive in another XP desktop and it works fine. I have a USB mouse that worked fine so the port was OK. I tried reinstalling the external hard drive several times and tried to use another external hard drive that I verified worked on another computer but that also would not install. I broused your forum and tried the registry patch.
http://forums.techguy.org/3435808-post2.html
Now I can't install the USB controllers either.
Domain Controllers - Server On Workgroup
Jun 5, 2006I have installed this OS on a new Fujitsu PRIMERGY TX150 S4. Now I want just to use this Server as a server on a Workgroup. But the OS insists that it should be the Domain Controller. And then it just shuts it self down. Below is a log from the event viewer. Just don't really want to configure the entire Lan from workgroup to Domain.
View 6 Replies View RelatedUninstalling USB Controllers From Device Manager
Feb 17, 2008I tried uninstalling the USB controllers from the Device manager restarting my computer, and waiting for the pc to re-install the devices itself. Unfortunatly, nothing happens. It DOES find the devices, it DOES reinstall everything, but when i plug in even the mouse, i get the same error msg. The usb ports are named "Unknown Devices" and when i check their properties, the have no drivers installed.
View 4 Replies View RelatedUSB Controllers Disppeared From Device Manager
Apr 23, 2006The Data Transfer status on my HDDs was PIO mode and I wanted to make it DMA so that my access speeds become faster. All I did was update my Primary IDE Drivers. They got updated and DMA mode was enabled. But during this I dont know what happened, but my device manager no longer displays Universal Serial Bus Controllers. The entire thread has disappeared (it doesent show up even when I do "Show hidden devices").
View 8 Replies View RelatedATA / ATAPI Controllers And Slow Comp!
Dec 5, 2007I have this major problem where my comp runs uber-slow untill I uninstall all the ATP/ATAPI controllers from my Device Manager and reboot. But the moment I reboot Windows reinstalls them again and after my next reboot my data transfer, and my comp in general is slow again.I have no clue as to why my comp runs fine without those controllers, but the moment they auto-install my comp becomes slow and jerky again.
View 2 Replies View RelatedMark/Highlight Many Programs At Same Time
Jun 12, 2005Used to have a program that allowed me to mark/highlight more than one item at a time. What is it?
View 15 Replies View RelatedExclamation Mark Besides 1394 Net Adaptor
Oct 20, 2009i have a exclamation mark in 1394 net adapter.can anyone help me with this.i have tried everything, google for answer, uninstall the driver, restart computer did an action update, still pop up with a Exclamation Mark.tried to load every xp cd, motherboard cd but still cannot manage to update the driver,my os is windows xp professional SP 3..motherboard is ASUS m2n-e sli.
View 9 Replies View RelatedUSB2 Host Controllers/reverting MS Drivers
Oct 1, 2008I've recently reinstalled XP on my PC using the recovery CD that came with it but I've noticed that the USB Host Controllers seem to indicate I only have USB1 and not USB2 like I had pre-reinstall. I've tried my hardest to locate them to no avail but stumbled across this which is for my particular PC but I am having a dumb moment and don't know how to revert to MS drivers. It's XP Home with SP3 installed.
View 6 Replies View RelatedSystem Unstable - BSODs - Disabled IDE Controllers
Oct 14, 2006I've had this ax8 board for some time. Previously, I'd been using an av8. Here's a run down of what I've experienced. With all the default devices enabled in bios, random irq/driver irq not less than or equal BSOD's. Disabled on board FDC, still bsods. Disabled onboard LAN, still bsods. Disabled IDE controllers, still BSOD's. I've tried a pcie and pci card, still bsods. Tried SATA 3&4, still BSODs. I replaced my USB keyboard/mouse with an old ps/2 keyboard and mouse, unplugged my usb headset, and it hasn't crashed since.
View 4 Replies View RelatedMark C: Active Xp Move Boot Stuff To It
Feb 9, 2010C: has windows on it an is marked "boot". A partition G: on that same physical drive is marked "system" and has the three files ntltr; boot.ini; and NTDETECT.COM. This is the only two partitions on that physicl drive. I have sucessfully moved the 3 files to a floppy A: drive and can boot from the a: drive. I also have them on the C: drive as well. I would like to boot from these 3 files on the C: drive so that the D: drive can be cleaned out. And all of windows stuff is on the c: drive where it belongs. I did disk management and can not set the partition C: "Boot" marked drive and the Partitioned G: "System" marked drive to active or anything. It does not show on the drop menu for the C: drive and it is greyed out on the drop down menu G: drive. I cant even change the drive letters of the G: drive.
View 1 Replies View RelatedAccess Bus Controllers - Install The Software Automatically Failed
Mar 14, 2006I do not know what happen. Every time when windows start,there is a pop-up message from the task bar stating that a new hardware 'bus controller' was found and a large dialog box appears that prompts me to install the hardware.So I follow the instruction and check for 'install the software automatically' but failed.I tried several times but not successful.I then go to Device Manager and found a yellow exclamation mark under 'Bus Controllers'.Here I tried to right-click on it and hit 'update driver' but also failed.
View 1 Replies View RelatedInstalling Drivers Ethernet Controllers - Cannot Connect To Internet
Oct 11, 2010Reformatted sons computer and re installed Windows xp. Cannot connect to internet because there are no ethernet controllers, or video, and audio. This I expected and thought all I had to do was download drivers for the MS-7050. I have been at it 6 hrs now and cannot find them! I know I found before but cannot quite remember what I found. Am I looking for the wrong thing to get the controllers etc working? Its a HP dx5150, AMD 64 Athlon. Motherboard is MS-7050 Ver 1.3
View 2 Replies View RelatedReboot - Icon In System Tray Red Sphere Containing White Exclamation Mark
Sep 14, 2007Every Time that I reboot I get an icon in the system tray, the icon is of a red sphere containing a white exclamation mark. I have run both a virus scan and spyware scan using CA eTrust anitivirus and Windows Defender but with no result shown.
View 14 Replies View Related
