Updation Of USB Host Controllers
Aug 1, 2005I have an Intel 865 board and XP running. The board has 4 USB controllers and hubs. If I want to connect USB2.0 capable devices, do I have to update all 4 controllers drivers, or just one?
View 12 Replies
ADVERTISEMENT
USB2 Host Controllers/reverting MS Drivers
Oct 1, 2008I've recently reinstalled XP on my PC using the recovery CD that came with it but I've noticed that the USB Host Controllers seem to indicate I only have USB1 and not USB2 like I had pre-reinstall. I've tried my hardest to locate them to no avail but stumbled across this which is for my particular PC but I am having a dumb moment and don't know how to revert to MS drivers. It's XP Home with SP3 installed.
View 6 Replies View RelatedUpdation Popup For Service Pack 3 Wont Complete Installation?
Sep 7, 2008i'm having this problem with service pack 3 installation.i'm running windows xp home with service pack 2. A balloon just came up the other day wanting to install service pack 3. I should say it was an update balloon. I would let it begin installation but after about 20 min. I would get this service pack 3 setup error box.Service pack 3 installation did not complete.Select ok to undo the changes that have been made.I would let it undo the changes but everytime that i booted up i would get this update balloon. What do i do?
View 14 Replies View RelatedSystem Formatting-during Updation System Reboots Automatically
Mar 5, 2007I formatted my system with Windows 2000 professional.
I installed SP4 after that.and anti virus software
Then i tried to update my system..there were around 50 odd updates.
but during the updation...my system reboot automatically.
Too Many IDE Controllers
Jul 30, 2007My PC recently started to really slow down. I realized I had also recently had to re-install a DVD drive after it just disappeared and that I might have an IDE issue.I uninstalled all the controllers as recommended on a separate thread. There were 3 Primary and 3 Secondary despite the fact I only have 2 Hard drives and 2 DVD drives. This did the trick and my PC is now booting like it used to but I'm concerned that it still thinks I have 3 of each IDE controller. Surely I should have 2 of each. Does this sound right? I'm concerned that the problem will re-occur if I don't properly fix it. I've had problems with DVD drives disappearing before, though not for a while.
View 5 Replies View RelatedUSB Controllers Disappeared.
Dec 25, 2006I'm using an IBM NetVista, Intel(R) Pentium(R) 4 CPU 1.80GHz and one night, powers went out. And when I turned my PC on, USB ports aren't working. To my surprise, at the device manager, USB section was gone. It was undetected, or w/e.
View 3 Replies View RelatedHi-speed USB Controllers Popping Up
Sep 8, 2005I'm having lots of troubles with USB 2.0 support. My mother board is a ASUS P5GD2 Premium, which only has USB 2.0 ports but my Windows XP SP2 keeps popping up this error! I have some drivers, but they don't install because XP SP2 should already support USB 2.0. Maybe the cables that connect the USB ports are the problem.
View 1 Replies View RelatedSwitching Order Of Controllers In XP
Sep 10, 2005I had a Thrustmaster Dual Power 4 game pad, and bought a Logitech Rumblepad later. I like the Rumblepad better, and want to consider it my "first string" controller. But if I go into say, Nba Live 2005, and go to choose controllers, no matter what I do, the thrustmaster is on the top of the list, and the logitech is on the bottom. All the old posts talk about choosing Preferred device in the control panel. By running DxDiag, I can see that setting something as the Preferred Device assigns it Controller ID 0. But I also see that the order of the Controllers, as recognized by most games, is the same as the order listed in the game controller control panel, and is completely unrelated to which device is "controller id 0" and "preferred device." For example, I set the logitech as preferred device, and plugged in the thrustmaster and also a gamepad pro.
View 4 Replies View RelatedStopped Reognizing The USB? Cant Install USB Controllers
Nov 26, 2006I have an external hard drive that was working fine on my USB port but at some point my Dell Laptop with Windows XP stopped reognizing it. I tried the external hard drive in another XP desktop and it works fine. I have a USB mouse that worked fine so the port was OK. I tried reinstalling the external hard drive several times and tried to use another external hard drive that I verified worked on another computer but that also would not install. I broused your forum and tried the registry patch.
http://forums.techguy.org/3435808-post2.html
Now I can't install the USB controllers either.
Domain Controllers - Server On Workgroup
Jun 5, 2006I have installed this OS on a new Fujitsu PRIMERGY TX150 S4. Now I want just to use this Server as a server on a Workgroup. But the OS insists that it should be the Domain Controller. And then it just shuts it self down. Below is a log from the event viewer. Just don't really want to configure the entire Lan from workgroup to Domain.
View 6 Replies View RelatedUninstalling USB Controllers From Device Manager
Feb 17, 2008I tried uninstalling the USB controllers from the Device manager restarting my computer, and waiting for the pc to re-install the devices itself. Unfortunatly, nothing happens. It DOES find the devices, it DOES reinstall everything, but when i plug in even the mouse, i get the same error msg. The usb ports are named "Unknown Devices" and when i check their properties, the have no drivers installed.
View 4 Replies View RelatedUSB Controllers Disppeared From Device Manager
Apr 23, 2006The Data Transfer status on my HDDs was PIO mode and I wanted to make it DMA so that my access speeds become faster. All I did was update my Primary IDE Drivers. They got updated and DMA mode was enabled. But during this I dont know what happened, but my device manager no longer displays Universal Serial Bus Controllers. The entire thread has disappeared (it doesent show up even when I do "Show hidden devices").
View 8 Replies View RelatedATA / ATAPI Controllers And Slow Comp!
Dec 5, 2007I have this major problem where my comp runs uber-slow untill I uninstall all the ATP/ATAPI controllers from my Device Manager and reboot. But the moment I reboot Windows reinstalls them again and after my next reboot my data transfer, and my comp in general is slow again.I have no clue as to why my comp runs fine without those controllers, but the moment they auto-install my comp becomes slow and jerky again.
View 2 Replies View RelatedSystem Unstable - BSODs - Disabled IDE Controllers
Oct 14, 2006I've had this ax8 board for some time. Previously, I'd been using an av8. Here's a run down of what I've experienced. With all the default devices enabled in bios, random irq/driver irq not less than or equal BSOD's. Disabled on board FDC, still bsods. Disabled onboard LAN, still bsods. Disabled IDE controllers, still BSOD's. I've tried a pcie and pci card, still bsods. Tried SATA 3&4, still BSODs. I replaced my USB keyboard/mouse with an old ps/2 keyboard and mouse, unplugged my usb headset, and it hasn't crashed since.
View 4 Replies View RelatedRAID Controllers Shows A Yellow Question Mark
Nov 4, 2009In Device Manager, RAID Controllers shows a yellow question mark. Not sure what a RAID Controller is.
View 1 Replies View RelatedAccess Bus Controllers - Install The Software Automatically Failed
Mar 14, 2006I do not know what happen. Every time when windows start,there is a pop-up message from the task bar stating that a new hardware 'bus controller' was found and a large dialog box appears that prompts me to install the hardware.So I follow the instruction and check for 'install the software automatically' but failed.I tried several times but not successful.I then go to Device Manager and found a yellow exclamation mark under 'Bus Controllers'.Here I tried to right-click on it and hit 'update driver' but also failed.
View 1 Replies View RelatedInstalling Drivers Ethernet Controllers - Cannot Connect To Internet
Oct 11, 2010Reformatted sons computer and re installed Windows xp. Cannot connect to internet because there are no ethernet controllers, or video, and audio. This I expected and thought all I had to do was download drivers for the MS-7050. I have been at it 6 hrs now and cannot find them! I know I found before but cannot quite remember what I found. Am I looking for the wrong thing to get the controllers etc working? Its a HP dx5150, AMD 64 Athlon. Motherboard is MS-7050 Ver 1.3
View 2 Replies View RelatedDrivers For IDE ATA/ATAPI Controllers Standard Dual Channel PCUI IDE Controller
Feb 3, 2008Were do I find a free upgrade for the above driver? That should read PCI in the title not PCUI.
View 7 Replies View RelatedRemove Newly Installed Hard Disks Or Hard Drive Controllers / Blue Screen Error
May 19, 2006A problem has been detected and Windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps.Check for viruses on your computer. Remove any newly installed hard disks or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
View 4 Replies View RelatedUse Desktop As The Host Computer
Oct 13, 2005I have a desktop PC running Window XP Home Edition and my laptop has XP Pro Edition. I want to use my desktop as the host computer and would like to run "Remote Desktop" so I can access the desktop via my laptop. I've been told both that it is possible and that it is not. The reason given for not being able to do so was that the "host" computer has to be running the Pro Edition.
View 1 Replies View RelatedDoes RD Host Need To Have Static IP Address?
Jul 13, 2005Does an RD host need to have a static IP address?
View 3 Replies View RelatedSvc Host Error Message
Jan 14, 2008svc host error message keeps popping up. Can't close or debug, only move it. Possibly related to McAfee - tried to remove it and can't seem to get rid of all components.
View 6 Replies View RelatedNEC PCI To USB Open Host Controller
Dec 21, 2005I have just reinstall my operating system and everything goes smoothly except that I found an yellow exclamation mark in 'NEC PCI to USB Open Host Controller' under Universal Serial Bus Controller.However when I turn off my PC,I encountered problem in swithing on again.I have to continuously press the startup button in order for it to boot again.Is that yellow exclamation mark the cause of this problem?If not,then what has happen to my PC?How do I get rid of that eclamation mark?I am running on windows XP Pro Serv.Pk2.
View 14 Replies View RelatedGeneric Host Process
Aug 15, 2006i have a "generic host process for win32 services" error after i've connected to internet with adsl usb modem.and my connection is lost till i shutdown and restart.i tried lots of things, do a google search but couldn't solve.when i restart the computer and do not dial for internet, no error occurs.
but when i dial and start to surf or download something it gives this error at different times.
sometimes the error occurs 10 minutes later sometimes 1 hour later.when i dal to the internet my network connection icon(near the time in the lower right corner) says limited connection or there's no connection.
i think that's beacuse it cannot receive ip from my ISP.how can i solve this limited connection problem?i removed the drivers installed again, removed the drivers and installed the old ones.do a virus scan with latest updatesdo a system restore but nothig changes.
Still With Svchost.exe / Generic Host Process
May 3, 2005I'm still having a Generic Host Process (or something) error on startup. It then says the error is something to do with svchost.exe in: I looked there and deleted the directory as there was nothing in the folder.
C:DOCUME~1SALLY&~1LOCALS~1TempWER863a.dir00svchost.exe.mdmp
C:DOCUME~1SALLY&~1LOCALS~1TempWER863a.dir00appcompat.txt
Remote Desktop Host Comp Win Xp Pro
Oct 15, 2008I am trying to connect from home to my office computer both are running win xp pro spk 2, i setup the office computer to allow remote access as described by microsoft, and i do from my home what i need to do to connect to it but no luck, ok i will tell you what i did in my office, i access my router and under port forwarding i addedd the ip of the office computer and assign port 3398, from home i am typing the office ip:3398, and still does not connect, i also added in the office computer a user and a password and i assigned to this userd admistrator rights, firewall is off on this office computer this is the message i get when trying to connect.
View 4 Replies View RelatedClient Unable To Connect To Web Through ICS Host
Jun 29, 2008My host PC (my desktop) is running an ASUS P5PE-VM with 1gig DDR PC3200 Crucial RAM, has a Intel DualCore E2180 @ 2GHZ. I use a dial-up connection, and even though it is dial-up, my connection speed averages from 52Kbps to 54.3Kbps. So its actually pretty good for dial-up. My OS is Win XP wit SP2. I think that pretty much covers the important basics. My client PC (my laptop) is an ACER Aspire 3100 w/ 512MB DDR2 It has an AMD Sempron 3200 @ 1.6GHZ w/512KB of L2 Cache. It also has an 802.11 b/g wireless Lan. I installed a wireless card (Belkin Wireless G desktop card) in my desktop (host) and set up an ad-hoc network between the two. Basically I set up a wireless network without a router. I've done this before and had no problem, however this time I cannot connect to the internet using the client (my laptop). Everything appears to be in order, ICS is enabled on the host, Firewall in configured, communication between the two is there, I verified by pinging both IP's using ipconfig. The host is able to connect to the internet and browse with out no problem. its just the client I am haveing trouble with. Could it be a DNS problem? When I open IE on the client it just displays the 'cannot display web page', I even tried pinging the web page and am successful in that, it just wont display the web page. Am I missing something?
View 16 Replies View RelatedGeneric Host Process - Cannot Fix It Through Web Address
Sep 9, 2005I just turned on my machine this morning (9/9/2005) and "Generic Host Process for Win 32 Services encountered a problem and needed to close. This error occurred on 8/4/2005 at 12:05:50am" I followed a link to MS site and downloaded a 'fix' for this. But why would this show up 36 days after it happened?
View 2 Replies View RelatedGeneric Host Process Error
May 13, 2007i really dont know what went wrong. i have my nod32 always on.. but still seems like some bug has entered my pc.everything was ok. but i thought about scanning pc using spybot.it found some problems. and i deleted files using spybot.every time that error will come and my internet wont work after that. i cannot even open network connection after that error. all that i can do is restart the pc. but error became very very frequent.so, i used recovery tool for spybot and recovered all deleted files but it error still remained.so, i decided to reinstall windows. just reformatted my C drive and the error still remains.
View 11 Replies View RelatedGeneric Host Process Failure
Nov 13, 2006I have a huge problem with my computer. After logging onto windows, or just browsing online for a few minutes, I get the following error:"Generic Host Process has encountered a problem and needs to close". Whenever that happens, I can't browse the Internet anymore, nor can I access any network services. I have to restart my computer every time I get that error message.
View 14 Replies View RelatedWin32 Generic Host Process
Oct 15, 2006Everytime I restart WinXP Home - I get this message: Generic Host Process for Win 32 Services has encountered a problem and needs to close.....
Error Report contains:
szAppName : svchost.exe szAppVer : 5.1.2600.2180 szModName : msi.dll
szModVer : 3.1.4000.2435 offset : 00012780
I have tried a system restore and that does not help. I have also found that I can now not see other computers on my network or even route to them. In addition Messenger Live will not log in any longer. They system could be messed up as I was shutting down last night it wanted to do some updates - I let it but this moring it still had the don't shut down screen on after 8 hours of sitting there I shut it down!