I run a system with win xp home and usb1 ports. I want to install a pci card with usb2 ports to use with my new printer. I would like to know what will happened with my usb1 ports after I installed usb2 ports.Will I have both type of ports available in the same time?
View 9 Replies
I was having a lot of troubles with XP PRO after a CPU failure, when I tried to do an XP installation Repair. It failed miserably and after a month of posting and searching for answers, I threw in the towel. I reformatted the HD and did a clean install. On the advice of a MS Tech, I downloaded SP3 and installed it first thing. After I got everything up and running with all the updates, I discovered that XP no longer recognizes my USB ports as USB2. I found some original drivers on the Motherboard installation disk, but it will not allow me to install them because my XP SP2 install disk is already supposed to have them. I tried removing all the USB drivers and forcing XP to figure it out, but no luck. It is an ASUS P5GD2 Deluxe with a P4 processer and an XP PRO SP3 Operating System.
View 3 Replies View RelatedTwo years ago I bought and installed a USB2 Card on my PC (Windows XP with SP2). Last week when I bought a new Printer (Canon MP 750), which uses USB2. When I connected, IT WOULD NOT WORK; but when I connected to a USB 1, IT WORKED, albeit with a message that"IT WOULD WORK FASTER WITH USB2" and inviting me to "clickhere" to find a suitable Port. I did this, of course, but was met with a message that"NO HI-SPEED USB HOST CONTROLLERS ARE INSTALLED ON THIS COMPUTER".
View 3 Replies View RelatedI recently ought an E-machines computer running XP MCE w/SP2. It has an AMD 3400 processor and 200GB HD and 1MB RAM. I had transitioned all of my files and applications from a Windows 98 machine using Aloha Bob's PC Relocater. Everything seemed to work fine, however, my USB ports will not recognize anything except my printer (no external flash drives or my digital camera - software is loaded onto the computer). I had contacted E-machines tech services and they asked me the usual stuff, like disabling the ports and restarting the machine, check the BIOS to ensure they are enabled, etc. Now they are suggesting I run a ''Non-Destructive'' System Retore. Naturally I will back up my files and apps on DVD, but my concern is will I be able to reload the apps to which I do not have disks for? Is there something elese I should do prior to running the System Restore (in SAFE mode??). Also do you think this will work and restore my USB ports?
View 8 Replies View Relatedusing win xp pro. just upgraded it from win 98. now my printer that is plugged into the usb will not work......(print) power is on!!.web cam wont work either. windows does not pick up the new devices , put drivers on for camera and it says no camera plugged in! older system.. i think p2 399 mhz 128mb sdr ram.
View 2 Replies View RelatedI currently have a desktop p.c. with functioning usb 1 ports. I would like to add a Belkin pci card which will provide usb 2 ports. Will this generate any problems?If it is advisable to do this what will happen to my existing usb 1 ports? Will they still function?
View 2 Replies View RelatedMy CPU has been 100% for over a month. I first thought it was a virus so a scanned w/ every program out there and nothing would detect anything, HJT log was reviewed and nothing found so I went down the Registry Path and tried to repair with Registry Repair Tools to no avail. So I backed up all my files and did a complete OS re-install in CPU is still at 100%. And when this problem first started by USB ports stopped working.
View 6 Replies View RelatedI'm trying to install my printer, usb, lexmark x75 all in one. When I try to install it I get a weird rpc server is unavailable error and it won't install it.
View 1 Replies View RelatedLast week I was hit with a multitude of viruses. Since then I've followed
the KRC Anti-Spyware tutorial, I have ewido, spybot (tea timer running), Ad-Aware, etc. and cleaned everythign up, and my system is finally stable again. I even got Norton System works and that helped a lot too. I've been to Windows update and am completely up to date with installs.2 problems still: I still have no audio, and 5 of my USB ports are not working
I have a HP Officejet 710 All-in-one,when I try to install my printer it dose not install,I keep getting a message,C:WindowsSystem32AutoExec.NT.The system files not suitable for running MS-DOS and Microsoft Windows. Applications.What can I do to install this printer
View 3 Replies View RelatedI have Windows XP SP2 on my laptop. I have been using an Epson C66 printer with this laptop for about 2 years. I recently had a problem with the printer so I went through the troubleshooter process and was instructed to contact Epson. I did, and when I sent the error script that I receive, they told me to contact Microsoft. I have been searching the articles for patches, fixes, etc but am not having any luck. When I try to reinstall the printer (with the printer cd or manually), the installation appears to be going through and copying files and then I get a message that the installation can not finish. The error script says: "The I/O operation has been aborted due to a thread exit or an application request."
View 6 Replies View RelatedLost the install CD for my Lexmarkx125 printer. Please tell me if there is anything I can do, I want to keep this printer, but I cannot install it.
View 7 Replies View RelatedI am running widows XP with SP2 installed and have never had problems with the 2 printers I have installed. A Lexmark X2250 & HP photosmart 7760 untill we had to take the computer in to have Norton antivirus 2005 update installed. When we got it back I found that both my printers did not work & neather of them showed up in the control panal. When I tried to print I got a message reading "Windows can not connect printer. The printer spooler is not running". I contacted the company that put Norton in & they said they touch the printers. Can anyone help me on how to correct this problem or direct me to where I can get info. on the printer spooler so I can reinstall my printers? I am very new at working on the computer be would like to learn.
View 5 Replies View RelatedI'm trying to get my Canon IP8500 printer to work with my Samsung NC20 netbook which is running Windows XP.Usually I simply plug the printer into any Windows XP computer and it'll automatically install the necessary drivers. However, when I plug it into my netbook and instruct Windows XP to automatically search/find and install the drivers, it can't find any.So I've gone onto the Canon website and manually downloaded the drivers, but when I try to install them via the setup.exe it says that a newer driver is already installed, and aborts the setup.The weird thing is that there definitely isn't a driver already installed, because I've even gone into device manager and uninstalled the printer/driver before trying again.
View 2 Replies View RelatedI have a Windows XP Pro (Service Pack 2, if that matters) graphics specialty workstation on my Windows 2000 domain. I have the same problem that several other people have posted here, where I want anyone who logs into that computer to be able to use its locally-connected HP PhotoSmart 7900 color inkjet printer. But when XP is connected to a Windows domain, nobody who doesn't have administrator rights to the computer can install the printer; besides that, I really don't want to have to get involved every time somebody who's never used that computer before suddenly wants to print on it.
View 1 Replies View RelatedSince updating to sp2 unable to install printer.Also wizard not avaiable to
install scanner or fax.Can anyoe advise?
We've just purchased a new laptop and would like to be able to print from our Lexmark printer (attached to a desktop pc) that is in another room. All attempts to "add another printer" have been futile. I can't seem to locate a printer when I "browse" for one and have no idea what the URL is for our Lexmark.
View 3 Replies View RelatedMy computer had been running fine, but I was using Mcafee and I hated it, so I uninstalled it. Without having any antivirus software to replace it with right away. So, about a week later (aka today), my dad was helping me install a new printer when everything went crazy. It was taking forever for my computer to boot up, and then after it was 'ready' it was incredibly slow. Then it would go to a blue screen with some text on it (I wish I had written down what it said, but I didn't-something about an infection detected) and we would shut it down manually. Finally, we were able to restore the computer to an earlier date. The printer is no longer installed, but I think I still have a virus.
I just installed avast, which during a reboot it did a scan where I had lots of infected files, and several options as to what to do with them. A few of them were temporary internet files, and not thinking, I hit delete. I realized this was a bad idea, and for the infected files after that, I selected "move to chest."
I'm not sure where to go from here. A lot of them are c:system volume information\_restore... which might have something to do with why my speakers aren't working.
I have a printer installed but when i try to print it keeps saying if i want to install the printer. And when i click yes it says: Operation could not be completed And when i try to delete my printer it says: Printer cannot be removed. The Print Spooler service is not running. And then i click RUN i type in services.msc and enter. Down the services list i go to Print Spooler and double click it. It says "Service status: Stopped". Well then i click start and after bout 10 seconds it goes back to stopped again
View 6 Replies View RelatedAfter install window's XP SP2 , I cannot install my VGA Card . Window's XP automatically intall VGA driver's it self ,but i cannot install latest Driver's for it .how i set the vga card as "Video Controller(VGA Compatible)" ?
View 2 Replies View RelatedSystem: XP Professional recently authenticated with MS GWA (cdrom enroute) was a ?pirated? copy
I have gone as far as I am comfortable with to locate and install the required .dll files. I authenticated the Windows XP. I downloaded 21 updates. I installed XPmedic, emailed them for support, and no response after 4 days. Below is the contents of the screen that stops the HP printer installation.
"Issues stopping installation:
slbcsp.dll (HKEY_LOCAL_MACHINESOFTWAREMicrosoftCryptographyDefaultsProviderSchlumberger)
This is a Cryptographic Service Provider manufactured by Microsoft.
sccbase.dll (HKEY_LOCAL_MACHINESOFTWAREMicrosoftCryptography|DefaultsProvider|Infineon)
This is a SICRYPT Base Smart Card CSP manufactured by Microsoft.
I have been trying to install a HP PSC 1350 printer, but have encounter an error repeatedly. The installation runs smoothly until I am asked to insert the USB cable. When I do, the progress bar reaches 6/8 before I am notified that the 'RPC Server could not be reached'. I have check Services, and both the RPC services are on, but still nothing- what could it be?I am running Windows XP Home, with 171.2GB additional memory, 512MB RAM and and a 3Ghz Processor.
View 1 Replies View RelatedDuring my network troubleshooting, I was checking my NIC configuration on my desktop to make sure that file and print sharing was enabled and realized that there is nothing installed, no clients, services, or protocols. When I try to install I got an error message that the file could not be found.This is strange because I get access to the internet.Is this possible?Could this be the reason my laptop cannot access the desktop? How I fix this?
View 14 Replies View RelatedI have a Epson RX500 printer and i keep getting a pop up box telling me this device will perform faster if i connect it to one of the available usb2 ports but it says click here to see all available ports which it shows as all being empty even though other devices are plugged into them.
View 4 Replies View RelatedI freshly re-installed my window xp home edition. Unfortunately, can't get my USB to work at 2.0 speed. all of them at USB1.0 speed now. My XP is SP3 and frequently updated. I've tried to update USB driver through Device Manager but still does not solve the problem. Now, the file transfers take hours.
View 5 Replies View RelatedBrief synopsis:I recently did a new Windows XP install (after a crash). Now I cannot get my printer to install. The printer is a SHARED printer (HP Deskjet F380) on another machine on the network. The printer was previous installed on this machine before the crash and reinstall of WinXP.After nearly 2 hours on the phone w/ HP support, it's been determined (by HP support) that somewhere in the XP install, a missing XP driver is keeping this install from properly allowing any printers to be installed. The printer will 'appear' to be installed, but any attempt to print brings an error saying printer drivers aren't properly installed.
View 14 Replies View RelatedI pluged in usb hub into computer, and everything was fine until 2 days ago. suddenly i get message that usb could preform better if pluged into USB 2.0 port.i tried everything and nothing happened. i tested usb hard drive plugged into hub, and it was very slow. when i pluged usb hard into computer it was normal.then i was mad and destroyed the hub. i bought new one. and same thing.
View 2 Replies View RelatedI have to install a sound card driver.I used PC Wizard 2008 and under Device Audio it says:Device Audio :82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller Manufacturer :Micro-Star International Co Ltd (MSI) Model :ALC850.
View 7 Replies View RelatedI made xp pro install on a usb sd card, it install fine but go to boot it gives me the blue screen of death with stop:0x0000007B (0XF7A0A524, 0XC0000034, 0X00000000, 0X00000000) it will go in safe mode fine, I made xp pro like xp enbedid, I would like to know what this means, I know 0x0000007B is a drive eror and could xp be changing the propertis of while it boots
View 7 Replies View RelatedI'm having trouble installing a sound card into my wifes pc I'm not sure what make the card is the chip on the pcb is CMI87/PCI-6ch-LX.
When I install it into the pci slot and boot the computer the video fails no display on the screen, so I removed the card and the screen worked ok.
I did disable the onboard sound card befor I tried to install this card.
I want to update my video card drivers because my video card is acting up and I want to see if new drivers will fix it.I printed out the instructions from ATI's site and followed it exactly. I used Add/Remove Programs and clicked on the ATI Software Uninstall Utility. I rebooted the computer. I went into Safe Mode. I tried to install the drivers.Upon doing this, every time I run the setup to install the new drivers, I get this error message:"INF Error: Video Driver Not Found" This happens if I try to install the latest Catalyst version. This happens if I try to install an older Catalyst version.This even happens if I try to reinstall the drivers that I just had (it installed fine before so why is the 5.11s giving me that error now)!
View 11 Replies View Related
