using win xp pro. just upgraded it from win 98. now my printer that is plugged into the usb will not work......(print) power is on!!.web cam wont work either. windows does not pick up the new devices , put drivers on for camera and it says no camera plugged in! older system.. i think p2 399 mhz 128mb sdr ram.
View 2 RepliesI recently ought an E-machines computer running XP MCE w/SP2. It has an AMD 3400 processor and 200GB HD and 1MB RAM. I had transitioned all of my files and applications from a Windows 98 machine using Aloha Bob's PC Relocater. Everything seemed to work fine, however, my USB ports will not recognize anything except my printer (no external flash drives or my digital camera - software is loaded onto the computer). I had contacted E-machines tech services and they asked me the usual stuff, like disabling the ports and restarting the machine, check the BIOS to ensure they are enabled, etc. Now they are suggesting I run a ''Non-Destructive'' System Retore. Naturally I will back up my files and apps on DVD, but my concern is will I be able to reload the apps to which I do not have disks for? Is there something elese I should do prior to running the System Restore (in SAFE mode??). Also do you think this will work and restore my USB ports?
View 8 Replies View RelatedI run a system with win xp home and usb1 ports. I want to install a pci card with usb2 ports to use with my new printer. I would like to know what will happened with my usb1 ports after I installed usb2 ports.Will I have both type of ports available in the same time?
View 9 Replies View RelatedSince I've formatted my computer, it started being slow and I don't know why. Do you have any tool that would help diagnostic the cause of my problem? My USB ports do not work either.
View 11 Replies View Relatedhave just reinstalled windows xp and 3 of my usb ports wont work there is power going to it as when i plug my web cam in the light appears on it looked in device manager and says all ok and all enabled and drivers are ok is there any other settings that maybe block ports thanks dan
View 11 Replies View RelatedWhen I start up my computer it will not respond to anything that has to do with my keyboard and mouse. I couldn't figure out why, I mean they came with my computer. The mouse is not even optical and it has a cord. I tried booting into safemode but since the keyboard doesn't work I couldn't. I tried booting from a disk but I have to be able to press any key to be able to do that. I couldn't log onto the accounts because that requires both a mouse and a keyboard. I tried using a different and keyboard that plug into the same ports, which resulted in the same thing. So I used a keyboard for a playstation 2 because it uses USB and I used a mouse I found that hooks up to USB as well. They work fine. However, I want the PS/2 ports to work because I better things to be taking up my usb ports.
View 1 Replies View RelatedMy computer doesn't recognize USB ports upon startup. When I turn it on, it says Floppy diskette seek failure, and I have to press F1 to continue or F2. It's always said that... and my mouse lights up and my key board lights up fine... but when I press F1 and it goes to the Windows loading screen, the lights powers off and the keyboard doesn't work.. and I can't use my mouse or keyboard when it reaches my login screen.
View 14 Replies View RelatedAfter a marathon problem with Windows not booting, I did a clean install on another hard drive. Now, one of my PCMIA ports (on the side of my IBM A31 Type 2652 laptop) doesn't work. Both were working fine prior to my boot problems and subsequent reinstall. One port still works, but I need to be able to use both for 1. a wireless card and 2. a USB 1.1 to 2.0 conversion card that I use when I print, etc. I've done Windows troubleshooting for drivers, etc., but Windows (as usual) found no problem.
We have Levine/Young The Complete Reference-Windows XP. Reading through before I did the clean install, I noticed a mention that sometimes this happens when XP is reinstalled, but there is no solution to the problem mentioned. I'm at a loss to getting both ports to work. I need a solution before the weekend is over.
I have a set of USB ports on the front of my machine and another set on the back. My ports on the back work fine and if i plug in my 2 pen drives in it works OK. But if I plug them in the front I get the error
This device cannot start. (Code 10)
The ports on the front work OK with my digital camera and joystick and my pen drive works on every other machine that I have put it in.
I have a Toshiba laptop satellite series A205-S5814.the time i bought it the USB ports were working but after a period of a year they are no longer working I updated the drivers but still now. I also changed the operating system that is from vista to XP but the problem persisted. It did not stop on that only, the DVD-ROM also failed to read DVDs.
View 8 Replies View RelatedAfter a recent automatic software update, the sound on my computer stopped working. When I go to the device manager, it's telling me that no audio device is installed and I can't seem to find it or how to reinstall it (I do not have the disk that came with the computer). However, my main concerns are the USB ports and the Plug and Play feature. These were working fine, but now nothing happens when I plug in a USB device. There is power going to the USB ports, however, the system doesn't seem to recognize that I have plugged something in. I've tried uninstalling the drivers and restarting the system, and the drivers were correctly reinstalled but it is still not finding any new device that I plug in. System restore isn't working either.
View 4 Replies View RelatedI had to format the hard drive and reload XP SP2.Seems to be working fine.But, my USB ports don't work. Do I have a driver problem, and if so, what is the fix.
View 14 Replies View Relatedi have a hp laptop and for some reason my usb ports aren't working, in device manager it says that they are working fine but it wont read the printer or a camera or anything, so i figured that maybe i have to update windows, so i try and do that and it says Validation Failure: Product Key Failed Validation, so what should i do?
View 2 Replies View RelatedNow my printer won't work. WIN XP and the printer is Lexmark X73. It was working, but now system won't recognize it.
View 8 Replies View RelatedI did a "clean" install of Windows XP Pro Version 2002 SP2, replacing the corrupted OEM XP Home version installed by CompUSA. Since then, my two printers don't work. One is a Brother HL-1440 laser printer, the other an HP officejet 6110 all-in-one. I reinstalled the drivers for both, even went online and downloaded the most recent version of the 1440 driver. No joy. Clearly, I've done something wrong, but what?
COMPUTER: HP Pavilion 7935
AMD Athlon processor
1.30GHz, 624megs RAM
You never know how much you need your printers until the day you can't print.
I have a work laptop running Win XP Pro that connects to my company domain, and to a company VPN. I need to be able to print documents at home, where I have a wireless/wired network (workgroup). The printer is a shared printer my home desktop PC (Win XP Home).I'm able to connect to the internet using my home network, but I can't connect to shared computers and printers. Is there any way to do this without losing access to my work domain?
View 8 Replies View RelatedI have recently updated (Auto)Windows XP. I have a Xerox laser printer on my network which after the update failed to work although it works from other computers (Mac) on the same network. I did a system restore and now it works, so the update is the fault. Before or if, I update again has anyone any advice on how to repair this situation. Auto Update is presently turned off).
View 6 Replies View RelatedLast week I was hit with a multitude of viruses. Since then I've followed
the KRC Anti-Spyware tutorial, I have ewido, spybot (tea timer running), Ad-Aware, etc. and cleaned everythign up, and my system is finally stable again. I even got Norton System works and that helped a lot too. I've been to Windows update and am completely up to date with installs.2 problems still: I still have no audio, and 5 of my USB ports are not working
In the printer and faxes window there are printer icons listed in addition to my default HP Printer. Whiy are they listed there and what do they do since you can't use them...or can you and if so, how? Two that are listed on my computer are:
Broderbund PDF Creator
Quicken PDF Printer
I bought a new HP printer today. I had a hotfix installed at some point that shutdown and woke up my printer at shutdown and startup. The new printer isn't affected by this hotfix. Does anyone know where I can get this patch?
View 2 Replies View RelatedTwo custom PCs with XP Pro at same SP level. PC1 sees printer through switch. PC2 can not see printer. PC2 connects and sees printer when I cable the USB DIRECTLY to the printer instead of going thru a switch. Therefore, I know PC2 can print. Have tried 2 different switches. An A/B data switch and Belkin's 4x1 USB Peripheral Switch F1U401. PC1 works with both switches but PC2 does not.
View 9 Replies View RelatedWe've had to change our address space and therefore the printer address has changed. I've changed the address on all but one computer. On this particular computer when I try to edit the TCP/IP port I get the message:
"An error occurred during port configuration. Access is denied."
If I try to create a new port I can select that I want it to be a Standard TCP/IP Port and then it tells me:
"Specified port cannot be added. Access is denied."
I have connected 3 new PC's on a P2P network, and connected a HP 4610 Color Laser Printer via a JetDirect 175 print server. On one PC, I can only print from the Administrator account. The other 2 computers work fine. On the one that is having issues, when printing a test page I receive a "Failed to Print" error mesage, and looking in the printer jobs menu, it shows that there was an error printing. The
Administrator account can print fine from this machine.
The user accounts are "restricted user" accounts on all 3 computers.
All 3 computers are exactly the same type, and all have the latest
updates.
After a system crash all printers are gone and when trying to add a printer I get the message:
"Operation could not be completed. The print spooler service is not running" After starting the service manually and trying to add a printer I get the message:"Operation could not be completed" and the service is stopped again.I looked at some of the previous answers and related topics (like article nine, and Q324757
i have seen some comments on forums that there are a lot of problems with all-in-one printers.
i should just buy a stand-alone printer and separate scanner?
I'm a tech at a college and am working on this computer that the printer spooler service won't stay started.You start up the machine and go to printers and faxes. There are none listed (of course cause the spooler isn't running) You click on add printer and it tells you that the service isn't running. So you go to run services.msc, printer spooler says it's stopped so you start it. It will then run until you try to print something or go to printers and faxes in the control panel. Basically as soon as you open the window the printer spooler service stops.Does anyone know a fix for this. Last time it happened one of my co-workers found a tool to fix it but we haven't been able to find it since and all the researching I have done leads me nowhere
View 8 Replies View Relatedi went a bought a digital camera, cept i only have 2 usb ports on my tower, can i add more? one port is for my mouse, and the other is for my printer, i have a lexmark 1185, but the camera needs a usb port to plug it in.
View 13 Replies View RelatedI am trying to get BitPim to work, for those of you who don't know it is an application that will give you access to your cell phone so you can create your own ringtones and what not.
The problem is that it keeps telling me that the COM port is not available.
Is there a way for me to run any report that will tell me what applications are using what COM ports, or how to make a COM port available.
any suggestion?
i have four usb ports all of them are not working
View 1 Replies View RelatedI play online first person shooter games and today my mx510 mouse started malfunctioning. I'd be playing and my mouse would just completely stop working, anywhere from 1-10 or so seconds. I tried using a different mouse, a mx500 and I still get the same problem. I've tried different usb ports, different mouses, and anything I could think of. These malfuntioning occurences happen quite often, maybe 2-3 times every five minutes, and my mouse completely turns off for whatever amount of time. My computer is about 3 years old, but I keep it running like the day I bought it. I plan on formatting really soon, within the next few days and that might solve the problem. Please let me know of any reason this problem is occuring, and what I can do to fix it
View 1 Replies View RelatedI plugged in a digital camera to my Toshiba laptop, but it won't recognize the camera, it also did this with my palm pilot too.
View 7 Replies View Related