Installed Fresh Copy Of OS: USB Ports Wont Work?
Jan 9, 2009I had to format the hard drive and reload XP SP2.Seems to be working fine.But, my USB ports don't work. Do I have a driver problem, and if so, what is the fix.
View 14 Replies
ADVERTISEMENT
Installed Fresh Copy Of Pro / Home Is Still An Option?
May 30, 2006I just install a fresh copy of XP Pro, but XP Home is still showing up as an option. What gives?
View 3 Replies View RelatedInstalled Fresh Copy Of OS: Computer Shutting Down Automatically?
Aug 27, 2008Regularly played games are running slower than usual, have had one crash from, apparently, being too stressful on the machine (CTD).Sometimes it holds steady and plays well enough... Battlefield 2 is where I notice the significant performance loss and where I benchmark my machine.Think I am missing a driver? Can I find out what driver I am missing? Device Manager doesn't show anything to the contrary. I've installed drivers from the MSI site(4in1 setup), ati/amd drivers for video card, netgear lan drivers.
View 8 Replies View RelatedRemoving Installed Operating System And Installing Fresh Copy?
Dec 27, 2008I recently had my XPS M1710(Windows XP Pro) swapped out for a M1730(VHP) and would like some assistance in getting rid of Vista and installing XP Pro onto the new system.
View 12 Replies View RelatedUSB Ports - Write Protected - Cannot Copy Files
Aug 14, 2005I have a new usb port it is a TONE 4.0GB. I cannot copy files to this drive due to it being write protected. How do I change it.
View 3 Replies View RelatedUSB Ports Stopped Working - Installed SP3
Aug 5, 2010I have lost access to all the USB ports on a PC. There was no apparent crash but I realised there was a problem when the USB Mouse stopped working. Everything else is working OK. I get an Error 39 (drivers corrupted or missing) and the 2 entries in Device Manager both have yellow marks against them. I only have "Standard Enhanced PCI to USB Host Controller" and "Standard OpenHCD USB Host Controller" entries below the entry for Universal Serial Bus Controllers - no Root Hubs are there and there are no Unknown Devices anywhere else.I was running XP Pro SP2 when the ports went, but have installed SP3 and Updated to see if that did anything - it didn't. I have tried the troubleshooting suggestions on Microsoft such as deinstalling and rebooting, updating, system restore and have done a repair installation using my original XP SP2 disc all with no result.
View 9 Replies View RelatedUSB Ports Do Not Work
Aug 16, 2006Since I've formatted my computer, it started being slow and I don't know why. Do you have any tool that would help diagnostic the cause of my problem? My USB ports do not work either.
View 11 Replies View RelatedFresh Copy Of Home Always Freezes?
Oct 9, 2006So I just rebuilt my PC, installed XP Home edition and installed the SP2 upgrade. I also installed some basic programs such as Norton Anti-Virus, Spybot, Ad-Aware, and Windows Defender. Since this is a fresh copy, you would think no problems right? Well, for some reason, this operating system just freezes everytime I'm trying to either install updates and other programs. It even freezes sometimes after its booted into the OS! There's no spyware or viruses, so I'm thinking it has to do with the SP2 install. I'm also dual booting with Windows XP Professional x64 Edition, which is running fine with no problems. I'm thinking about uninstalling SP2 if this solves the problem.
View 12 Replies View RelatedInstalling Fresh Copy Of XP: PC Only Boot From CD Rom?
Sep 7, 2005I'm having this problem with windows xp pro fresh install onto sata HD. Pressed F6 and installed sata drivers for the mobo etc. Now i hasten to add that i have tried this 3 times now, set up runs smoothly windows installs however when i have finished windows will only boot up with the CD in the CDROM. Been into Bios and changed boot sequence but still if no CD it just gets to boot from cd in the boot up screen and> stops, put the disk in and windows boots straight up and away we go.
View 1 Replies View RelatedNo USB Ports Working - Driveres Installed Correctly
Sep 15, 2005None of my USB ports are working. I believe that it was the cause of a thunderstorm. I already uninstalled all drivers and ports in the device manager and let windows reinstall them, and still none of my hardware is recognized, not even my mouse. All drivers seem to be installed correctly. Can my usb ports be fried? I dunno.
View 2 Replies View RelatedUsb Ports Wont Work
Oct 17, 2005have just reinstalled windows xp and 3 of my usb ports wont work there is power going to it as when i plug my web cam in the light appears on it looked in device manager and says all ok and all enabled and drivers are ok is there any other settings that maybe block ports thanks dan
View 11 Replies View RelatedWant To Reformat Drive And Re-install Fresh Copy
Dec 31, 2006My computer got a harsh virus on it that is giving me problems so i'm left with no choice but to reformat it.
but here is my problem..
when i get to the partition part of the installation, it shows that i have 2 drives.
C: my main drive that has 70GB
D: Recovery drive that has 10 GB...
so, how should i approach this.
I just want 1 copy of windows XP running on my computer.
Formatting Sp1 And Installing Fresh Copy Of Sp3 / Lost Cd Key?
Sep 17, 2008m trying to format my old bros pc but when i just boot off the disk is just resumes the current installation of windows. We do not want the version as its old and we want to install sp3 which we bought yesterday. Also becuae we lost the cd key for the sp1 one and we cant find it anywhere and continue to get to windows then restart like a normal edition.
View 2 Replies View RelatedInstalling Fresh Copy Of Operating System?
Sep 17, 2007I'm currently using Acer Travelmate 650. I need to reinstall the windows as i'm passing my notebook to my friend. how i reinstall my windows as i don't have a cd-rom for install.
View 35 Replies View RelatedRe-install Fresh Copy Of OS Without Loosing Data?
Sep 20, 2005its a brand new computer and only a month old. Windows XP Professional keeps on restarting itself for no reason. I tried to get into safe mode but it also restarts the computer before the OS can be loaded. It's the main business computer that keeps all my employee numbers and payroll accounts. Is there a way to reformat the computer without losing my precious data?
View 6 Replies View RelatedUnable To Get Sound After Installing Fresh Copy Of OS?
Nov 5, 2009i have an hp 532w, It came with windows xp home edition on it. recently I used a Dell version of Windows XP Pro and installed it over my hp home edition. I lost my sound and when I look at my device manager i see a little yellow flag by my multi media controller. If I try to Upgrade the driver I get the blue screen of death. I tried to reistall my origanial operating system, from my 8 recovery disks it won't let me. I trie booting from it and it won't let me. It sez I'm missing (windowsroot) system32hal.dll.
View 12 Replies View RelatedUsb Ports For Printer Wont Work
Apr 23, 2005using win xp pro. just upgraded it from win 98. now my printer that is plugged into the usb will not work......(print) power is on!!.web cam wont work either. windows does not pick up the new devices , put drivers on for camera and it says no camera plugged in! older system.. i think p2 399 mhz 128mb sdr ram.
View 2 Replies View RelatedKeyboard - Ps2 Ports Dont Work
Sep 5, 2005When I start up my computer it will not respond to anything that has to do with my keyboard and mouse. I couldn't figure out why, I mean they came with my computer. The mouse is not even optical and it has a cord. I tried booting into safemode but since the keyboard doesn't work I couldn't. I tried booting from a disk but I have to be able to press any key to be able to do that. I couldn't log onto the accounts because that requires both a mouse and a keyboard. I tried using a different and keyboard that plug into the same ports, which resulted in the same thing. So I used a keyboard for a playstation 2 because it uses USB and I used a mouse I found that hooks up to USB as well. They work fine. However, I want the PS/2 ports to work because I better things to be taking up my usb ports.
View 1 Replies View RelatedUSB Ports Dont Work Upon Startup
Jan 27, 2009My computer doesn't recognize USB ports upon startup. When I turn it on, it says Floppy diskette seek failure, and I have to press F1 to continue or F2. It's always said that... and my mouse lights up and my key board lights up fine... but when I press F1 and it goes to the Windows loading screen, the lights powers off and the keyboard doesn't work.. and I can't use my mouse or keyboard when it reaches my login screen.
View 14 Replies View Related2 OS Options On Boot Screen: Fresh Copy Rather Than Upgrade?
Jun 7, 2008I recently upgraded my laptop from XP Home to XP Pro. But, I absent-mindedly started to install by booting from the CD like I was doing a fresh install/reformat rather than doing it from inside the OS to do an upgrade. I caught myself, however and restarted without the CD and upgraded Windows from inside Windows. It worked, but now when I boot my computer, it gives me two options to choose from: "Windows XP Home Edition" or "Windows XP Professional Setup." When I pick the Home option, the computer boots up fine and goes to Windows.
However, when I go to Start>Control Panel>System, it shows that I have XP Pro even though I chose the XP Home option at boot. If I choose the XP Pro Setup option, it asks for the SP2 CD, even though the OS is bundled with SP2 on the same CD. I hit Enter, and it keeps asking for the SP2 CD even though the CD is in there. I tried to go to the Disk Management screen and delete the XP Pro Setup partition (which was only 1Gb), but that didn't work. So, I figured that boot.ini was still confused as to what to boot to.
Unable To Format And Reinstall Fresh Copy Of Windows?
Oct 12, 2006computer started to run very poorly: lagging, freezing up, windows end task etc finnaly one day it would not go into desktop. would only give option to start in normal mode or safe mode. so i tried starting in both but would only restart into the same option screen.I decided it was best to format harddrive and reload windows. insert windows disk and proceeded to format partition and reinstall windows. it formats all that way to 90 % and then states cannot format partition further, harddrive problems and to trouble shoot manual. tried quick format and repair but still nothing.tried restarting without reinstall disk. says cant access OS of course!
View 11 Replies View RelatedFinding / Replacing Bad Drivers With Fresh And Clean Copy Of These?
Dec 30, 2004I've been getting a lot of BSOD on my XP notebook (P4 3ghz, 784 ram). Sometimes it will say an ACPI.sys error, or a Bad Pool Caller, etc.I've done some looking and it seems it's a bad driver (well, other posts say that). How do you go about finding which driver it is? There's gotta be 100s of them.....
View 2 Replies View RelatedUnable To Install Fresh Copy Of Operating System?
Jul 26, 2009I have been trying to clen up an old computer to give away. It is a 2002-vintage desktop with 512MB ram. I tried several times to reformat and reinstall xp, but I have only succeeded in removing the operating system and reformating both the hard drives. I have the OEM xp disk that came with it but I have tried 15 times to install xp and I can't. Is there anything I can do to fix this?
View 11 Replies View RelatedInstalling Fresh Copy Of OS: Buying OS Disk From EBay?
Dec 24, 2009I have a six year old dell. old installation of Windows XP is damaged beyond repair so I will have to reinstall it.I have the dell serial number, service tag number, and most of the other relevant information. I even have the original Windows XP license key number printed on a label on the side of my computer.the one thing that I do not have is the Windows XP installation disk.What is the best way to resolve this?I have seen XP disks for sale on ebay craigslist. Can I purchase one of those and install it on my old computer? If I do that should I get a new license key from them or do I use my old one.
View 7 Replies View RelatedUnable To Install Fresh Copy Of Operating System?
Mar 20, 2006ive been trying to reinstall windows on my pc, it will do everything fine until it starts to instal, it will get to about 50% threw the devices then it wont do annything after that, ive tryed everything i can think of to undo the installation but cant get it to work, is there something if missed for it to install correctly? if not can you tell me how to undo the new installation as its useless at the moment
View 14 Replies View RelatedPro Reinstalled - PCMIA Ports Doesnt Work
Mar 11, 2010After a marathon problem with Windows not booting, I did a clean install on another hard drive. Now, one of my PCMIA ports (on the side of my IBM A31 Type 2652 laptop) doesn't work. Both were working fine prior to my boot problems and subsequent reinstall. One port still works, but I need to be able to use both for 1. a wireless card and 2. a USB 1.1 to 2.0 conversion card that I use when I print, etc. I've done Windows troubleshooting for drivers, etc., but Windows (as usual) found no problem.
We have Levine/Young The Complete Reference-Windows XP. Reading through before I did the clean install, I noticed a mention that sometimes this happens when XP is reinstalled, but there is no solution to the problem mentioned. I'm at a loss to getting both ports to work. I need a solution before the weekend is over.
Pen Drives Work On Some Usb Ports Not Start - Error 10
Aug 27, 2005I have a set of USB ports on the front of my machine and another set on the back. My ports on the back work fine and if i plug in my 2 pen drives in it works OK. But if I plug them in the front I get the error
This device cannot start. (Code 10)
The ports on the front work OK with my digital camera and joystick and my pen drive works on every other machine that I have put it in.
Unable To Install Fresh Copy Of OS: Getting Stop Error During Setup?
Aug 21, 2009I have a HP laptop that once ran on Vista. This summer before I left for college,I decided that it was finally time to downgrade to XP,seeing as I had backed up everything, and classes would be starting in a week.So I did the usual thing. Insert CD, restart computer,"A problem has been detected, and Windows has shut down...."Blue Screen of Death. The Stop Message: 0x0000007B (0xF78D254, 0x00000034,0x00000000,0x00000000)
View 7 Replies View RelatedHard Drive Crashed / Unable To Install Fresh Copy Of OS?
May 16, 2006My hard drive recently crashed and I reinstalled windows xp, the copy i brought with the product key turns out to me fake or blacklisted by Microsoft, the problem is i scanned the disc used for installation and it contain more than a few adware programs and viruses. My PC is operating noticeably slower than before the crash, I scanned my RAM with MemTest. There is also a couple adware programs that comes up in processes, only bitdefender blocks it from popping up when using the internet. Also my Primary IDE channel is using PIO Mode instead of DMA, ive heard this can be because of viruses, should I reinstall windows?Could this mean the windows has been modified and what should i do?
View 10 Replies View RelatedFinding Procedure To Install Fresh Copy Of Operating System?
Mar 25, 2005What would be the procedure for me to change from Windows XP to Windows 2000? Does XP have to be uninstalled or can I install 2000 without that requirement? Someone told me that I could just install 2000 and, that, in effect, would override XP. But, I don't want to goof something up so I thought I had better check with the experts here first.
View 13 Replies View RelatedInstalling Fresh Copy Of Operating System Without CD Modular Drive?
Aug 27, 2005I need to install Windows XP on a laptop (Dell Latitude CPx H500GT) but I don't have the CD modular drive for it.How do I install XP with no built-in CD-ROM drive? The only other options I have is a ethernet PC card, one USB port and I do have a USB enclosure (for use with 3.5 hard drives or 5.25 cd/dvd drives)
View 8 Replies View Related